Left over objects from install?

I had started to migrate DNS and DHCP from a Netware 6.5 server to an
OES 11 server and then held off. DNS and DHCP are both still running
fine on my two Netware 6.5 servers. I noticed that I have some odd
objects scattered around my tree now.
Netware servers are FS2 and FS7
OES server is FS13 (DNS and DHCP are not running here)
O=MSKTD
- DNSDHCP-GROUP (FS2.MSKTD and FS7.ININ.MSKTD)
- DNS-DHCP (FS2.MSKTD and FS7.ININ.MSKTD)
- DHCP_FS2
- DNS_FS2
OU=ININ
- DNSDHCP-GROUP (OESCommonProxy_fs13.ININ.MSKTD)
- DHCPGroup (OESCommonProxy_fs13.ININ.MSKTD)
- DHCP_FS7
- DNS_FS7
- DHCP_fs13
- dhcpLocator (points to FS2.MSKTD)
Can I delete the following objects from OU=ININ? Does Netware DHCP
use the "dhcpLocator" object?
- DNSDHCP-GROUP (OESCommonProxy_fs13.ININ.MSKTD)
- DHCPGroup (OESCommonProxy_fs13.ININ.MSKTD)
- DHCP_fs13
- dhcpLocator (points to FS2.MSKTD)
Thanks,
Ken

Originally Posted by ketter
I had started to migrate DNS and DHCP from a Netware 6.5 server to an
OES 11 server and then held off. DNS and DHCP are both still running
fine on my two Netware 6.5 servers. I noticed that I have some odd
objects scattered around my tree now.
Netware servers are FS2 and FS7
OES server is FS13 (DNS and DHCP are not running here)
O=MSKTD
- DNSDHCP-GROUP (FS2.MSKTD and FS7.ININ.MSKTD)
- DNS-DHCP (FS2.MSKTD and FS7.ININ.MSKTD)
- DHCP_FS2
- DNS_FS2
OU=ININ
- DNSDHCP-GROUP (OESCommonProxy_fs13.ININ.MSKTD)
- DHCPGroup (OESCommonProxy_fs13.ININ.MSKTD)
- DHCP_FS7
- DNS_FS7
- DHCP_fs13
- dhcpLocator (points to FS2.MSKTD)
Can I delete the following objects from OU=ININ? Does Netware DHCP
use the "dhcpLocator" object?
- DNSDHCP-GROUP (OESCommonProxy_fs13.ININ.MSKTD)
- DHCPGroup (OESCommonProxy_fs13.ININ.MSKTD)
- DHCP_fs13
- dhcpLocator (points to FS2.MSKTD)
Thanks,
Ken
If you aren't running dns/dhcp on fs13 (the OES box), then the objects aren't needed. If you plan on running them in the future, then you may need them. NetWare contains the dns and dhcp locator under one object: DNS-DHCP. OES break them off. DNS uses DNS-DHCP and DHCP used dhcpLocator. NetWare does not use the dhcpLocator. The other objects you mentioned are DHCP specific, so if you aren't using DHCP on fs13 and you want to get rid of them, then you can do that.
Wouldn't hurt to export your dns/dhcp configuration using the DNS/DHCP Java Management Console before making any changes. That is just good practice.

Similar Messages

How can I move my left over money from my UAE account into USD for my American itunes account?

How can I move my left over money from my UAE account into USD for my American itunes account?

How can I go back to my US account then?? I only have .03 aed left..

Power Pivot SharePoint 2010 uninstallations left over entries in config DB .can we delete them? How to delete Power Pivot left over objects in DB?

Name Status Version Properties
MSOLAP$POWERPIVOT 0 0x000000000021CF50 <object type="Microsoft.AnalysisServices.SharePoint.Integration.EngineServiceProxy, Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"><fld name="m_Versions" type="null" /><fld name="m_UpgradeContext" type="null" /><fld type="System.Collections.Hashtable, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" name="m_UpgradedPersistedFields" /><fld name="m_Properties" type="null" /><sFld type="String" name="m_LastUpdatedUser">Domain\USername</sFld><sFld type="String" name="m_LastUpdatedProcess">PSCONFIG (11884)</sFld><sFld type="String" name="m_LastUpdatedMachine">ServerName</sFld><sFld type="DateTime" name="m_LastUpdatedTime">2014-02-21T17:39:25</sFld></object>
PowerPivotServiceApplication1_c17206969d204609ac63fe5fb1e84d77 0 0x000000000021D09B <object type="Microsoft.AnalysisServices.SharePoint.Integration.GeminiServiceDatabase, Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"><fld name="m_Username" type="null" /><fld name="m_Password" type="null" /><fld name="m_FailoverServiceInstance" type="null" /><fld name="m_Snapshots" type="null" /><sFld type="Boolean" name="m_MultiSubnetFailover">False</sFld><fld name="m_Versions" type="null" /><fld name="m_UpgradeContext" type="null" /><fld type="System.Collections.Hashtable, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" name="m_UpgradedPersistedFields" /><fld name="m_Properties" type="null" /><sFld type="String" name="m_LastUpdatedUser">Domain\USername</sFld><sFld type="String" name="m_LastUpdatedProcess">w3wp (992)</sFld><sFld type="String" name="m_LastUpdatedMachine">ServerName</sFld><sFld type="DateTime" name="m_LastUpdatedTime">2014-02-21T17:58:21</sFld></object>
I am having issues with power pivot uninstallation. These two objects are left over after uninstallation.
How to deal with it?
Is there any way to delete these entries in the config DB?
As i Know we should not delete anything manullay from config Database?
Is there any powershell script or stsdam comand to delete these entries from the config database and re install power pivot for sharePOoint
Ravi

Hi Trevor,
I have Reviewed uls logs.. It shows follwoing messages.
SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity for NTName='Domain\USername',
UPN='UserName@domain'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.Security.SecurityAccessDeniedException: Access is denied. Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.IS4UService_dup.UpnLogon(String upn, Int32 pid)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.<>c__DisplayClass1.<UpnLogon>b__0(IS4UService_dup channel)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.CallService(Func`2 contractOperation)
at Microsoft.SharePoint.SPSecurityContext.GetWindowsIdentity().
Error 2:
MossHost.TryGetWindowsIdentity: Failed to get WindowsIdentity from IClaimsIdentity. SPSecurityContext.GetWindowsIdentity() threw exception: System.InvalidOperationException: Could not retrieve a valid Windows identity. ---> System.ServiceModel.Security.SecurityAccessDeniedException:
Access is denied. Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.IS4UService_dup.UpnLogon(String upn, Int32 pid)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.<>c__DisplayClass1.<UpnLogon>b__0(IS4UService_dup channel)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.CallService(Func`2 contractOperation)
at Microsoft.SharePoint.SPSecurityContext.GetWindowsIdentity() -
-- End of inner exception stack trace ---
at Microsoft.SharePoint.SPSecurityContext.GetWindowsIdentity()
at Microsoft.Office.Excel.Server.MossHost.MossHost.<>c__DisplayClass8.<TryGetWindowsIdentity>b__6()
Error 3:
CredentialsProvider.GetCredentials: Failed to get WindowsIdentity.
Credential delegation failed because Excel Services Application was unable to obtain a Windows Identity.
COuld you please share some ideas for it.
Thanks
Ravi
Ravi

How to clear my left over money from my gift card ?

I use my gift card and left 0.04 cents,I can't spend the left over money and I want to change my App Store to another country but it it can't cause I left the money and now I in US store.

Click here and ask the iTunes Store staff to zero your account balance.
(107536)

Left over marks from Adjustment brush, how do i fix?

Hey, just got lightroom 4 and was playing around with the adjustment brush making a photo have a splash of color in black and white. but i can see faint lines left from the brush and i don't know how to get rid of them, any suggestions?

The adjustment brush has a softness setting as well as a size setting, and it takes a little practice and manual skill to develop expertise with it. Ctrl+Shift+ [ ] keys to change this.
Rather than a lot of overlapping strokes, it is normally easier to get a smooth outcome by brushing over a relatively large and diffuse area, and then by more firmly erasing out the parts that you do not want the effect applied to, rather than laboriously painting up to the outline of that.
Also, in my experience it works better to apply a strong amount (relatively opaque brush) of a weak adjustment effect, rather than setting the adjustment to a strong effect and then trying to mute its effect through the use of transparency in the brushstrokes. The former method lets you exaggerate the strength so you can see what you are doing, and then dial it back to taste afterwards. The latter method is relatively hard to be precise with, and there is no way to smooth it out if you get it wrong.
But... IMHPBHFO (in my highly personal but heartfelt opinion) this one particular effect runs counter to the whole idea of colour photography, and also to the whole idea of black-and-white photography, in a rather insidious and fundamental way. Definitely no offense intended here ... and I am not speaking from elitism or purism. We've probably all gone there at some point. But - purleeze - never again (grin). Black-and-white is more than just an "effect"; it's a whole, lovely, independent medium of its own - if appreciated for itself.

Install info object from D version to A version

HI,
I am trying to install the infl objects from D version to A version. I have selected Grouping mode(Only necessary obects0 B default, Collection mode (Collect automatically) Didsplay (Hierarchy mode) and dragged the in fo objects from left side to right side into collected obects and selected install mode (Install and transport) , i gave the trsport also and installed, but ater install if i see in RSD1 still it is in D version only, not in active version only.
Do i need to any other steps required to install info object from D version to A version. Please suggest me if i mssing some thing.
Thanks
Best regards
SG

hi
if you want to install only the info objects, follow the steps
click the source system icon on the top
click on objects type under bi content
select collection mode automatically
select only necessary objects, under grouping
expand your info object and select your info object and transfer
check the box , in front of info object
install in in back ground.
by default display is hierarchy.
check the job in sm37, when the status is finished only you can check the info object,
if still it is D version then goto rsd1 , give the info object name and make it active.

In-app purchase of Hellfire coins taken out of bank through Paypal, even though there was a balance left over from a gift Card in app store.

In-app purchase of Hellfire coins taken out of bank through Paypal, even though there was a balance left over from a gift Card in app store.

Biancasmum wrote:
I transferred $8.50 into the visa debit card. Which made my balance in the card $8.50. I then made an in app purchase for $8.49.
Did you allow for Local Taxes ?
If not... your iTunes Account my be showing that Money is owed.
No one here can see your Account Info as this is a User to User Forum.
Suggest you Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
OR... add another couple of Dollars to your Card and try the Purchase again.

I have credit in my account, iBooks charges the credit and there is still credit left over but seems to be taking the tax from card on file. Is this how it works?

Totally confused here as I have credit in my account. It seems to be using the gift card credit, but I still get a little bit taken from my credit card. No I'm not using up all the actually gift card credit, the price is under that. I still have credit left over. But continue to receive charges of 1.03 or 4.28 to my charge card and not taking amount from gift card.

I was having this problem too. Last night, before I rented a movie, I turned iTunes on on my iMac. I rented the movie from iTunes on apple tv, then checked my acount on my iPad. My account updated once I logged into it. Maybe you need to have iTunes running when purchasing or renting.
Try it.

Move an animator object from right to left

How do I move an animator object from right to left? I tried using the value with a minus sign in front of it. (i.e. -(xcoord) ) Please help.
Thanks,
Chris

After you create the animator, click on it on the panel, you will see a rectangle. You can drag the rectangle to bigger or smaller. The graphic will be moving inside of this rectangle. In this rectangle, bottom left corner is x0 y0. Top right cornet is x100, y100.
Ryan Shi
National Instruments
Attachments:
process1.zip ‏1 KB

Video dongles left over from 12" Powerbook

I have just ordered a MacPro for my wife. She was using my old 12" Powerbook up till now. I have two video dongles left over from the 12" PB. One is a VGA port, and the other has an S-video and RCA video out connectors. They have the same compact video connector as the MacBook. Will these work with the new MacBook?

Ok - I realize that I typed MacPro in the first message when the computer is a MacBook. It is here and I know for show that the old dongles do not fit - the size of the connector is different.
So that sews it up readers - you can not use the dongles from the 12" Powerbook on the MacBook

How do I get an object to rotate as it moves up and down or left and right from one time key to the next ?

how do I get an object to rotate as it moves up and down or left and right from one time key to the next ?

I'm partial to this series:
After Effects basics tutorials by Andrew Devis
The subject matter is very clearly-defined by topic.
And AE shouldn't up & quit on you... but you haven't breathed a word about your system or your AE version. Please share.

How do i clear url history left over from version 3.6

greetings. i have url history that seems to be left over from some point before i downloaded 4.0. how do i clear it now ?

This link shows how to do that - https://support.mozilla.com/kb/Clear+Recent+History

Hello apple community, I am Christian i am just wandering if my iPhone's embedded battery would bubble(get fat thingy) if I left it charging over nightly because last night I accidentally left it charging from 10 pm to 3 am thank you ,5s user here

Hello apple community, I am Christian i am just wandering if my iPhone's embedded battery would bubble(get fat thingy) if I left it charging over nightly because last night I accidentally left it charging from 10 pm to 3 am .. Note this happens for 3 nights also but not in a row, thanks in advance iPhone 5s user here .. First time with Apple

A few battery tips...
You can start using it out of the box, or charge it, whatever you like, doesn't matter either way.
You cannot overcharge the device, thus you can leave it plugged in as long as you like.
You can and should charge as often and as long as possible... deep discharges are hard on lithium batteries. Normal mobile use will usually result in the one charge cycle/month that Apple recommends although it's OK to fully discharge and then recharge to 100% every once in a while to recalibrate the battery meter.
http://www.apple.com/batteries/iphone.html

Coping Portal objects from Test to production on different Domains

I want to know if anyone besides my company uses separate domain environments to do development, QA, and production. How did you get around the object owner issues that come from this level of security. Did you have to Export OID objects from one environment, and import them into the other environments to get a common GUID? Do you use a common user to do development? I would like to hear some common/best practice advise if you have any.
For those that want to understand the issues here is a little example:
For this example, I am going to call my company Acme (I like this name). Acme uses a Sneaker method of security (Sneaker method means - To move data from one level to another, you must put in on a diskette, tape, or CD and put your sneakers on the floor and walk it to another location to install it.). While this is the most secure method out there to day, it makes working in development EXTREMELY difficult. Completely isolated environments require special concerns. I wanted to know if anyone out there does this now, and how they manage these issues.
Domains:
www.Acme.com
www.QAAcme.com
www.DevAcme.com
When you do development on your site you login as a portal developer JSmith, or KJones, of BRight on the www.devacme.com domain. You build your Portal objects and custom stuff. Now you want to move it to QA, so they can test it and promote it to Production. You build your transport sets. You export using your UNIX script and get your file. You burn the file and the UNIX script to CD.
You then take the CD to the www.QAAcme.com domain Portal server and login to that system as Oracle / OrcAdmin (God mode). You run the Import script as you normally would. <Error> This doesn't work completely because your user Jsmith is different on this domain and doesn't carry the same GUID in OID. While privileges and spelling are identical, the GUID's in OID differ and the domain names dont match. (Problem - Separate domains and OID identities - objects without matching owner GUID's will not import.)
When you check your stuff you realize that some or most of your work is missing, and all of the security that you placed on the objects is not working correctly either. Because domains are different, any OID users which you assigned permissions to are now not working at all. You will have to redo all the permissions work on this domain just like you did on the other domain. (Problem - there is no easy way to change domain names associated to OID users or group accounts, even if the names are EXACTLY the same. Permissions do not move over for users so assigning item level security is a waist of time since you will have to manually do all that work over again.)
To correct then problems above, you go and export OID user objects like OrclAdmin, IAS_Admin, and a few others. You import these identities on each domain. Now what? Do you give developers 1 identity to do their work? Pass out the Admin passwords on Dev to all the developers to do as they please? Do you build a Dev User for each Developer you have and manage those ID's outside of your normal routine?
This should draw a somewhat clear picture. There are more issues besides these. I left those out of this talk for now.
If you have questions please let me know. I would like to hear input on this. Right now, I don't have any easy solutions, just a lot of extra work. Thank you in advance for any input.
Frank

Hi Frank,
A very interesting question, which I never tried nor seen. Anyway, maybe I can try to give you a hand...
I believe the major problem doesn't seem to be the GUID but rather the privileges of the users / groups within the Portal. I'm assuming that you really want that the users and groups privileges be assigned to the three Portals, 'cause you wanna test them or something like that... otherwise it would be a lot easier to assign them only to the Production machine - also what the Portal documentation encourages you to do (and never take them with the Portal Export / Import... ie, the Portal ACLs).
In overview, what I think it might work, would be something like:-
1. Export all the OID users / groups to LDIF files.
2. Change the domains in the LDIF files to the Target Portal.
3. Import all the OID users / groups to the Target Portal.
4. Export with the Portal Export to a Transport Set.
5. Export the Transport Set to a DMP.
6. Import the DMP.
7. Backup the Portal Target at this stage - ALWAYS!
8. Before merging the DMP file the WWUTL_SEC_TX_PERSON$ and WWUTL_SEC_TX_GROUP$ tables need to be changed - DN (security is taking IDs of the users/groups internally to the Portal - so this should be fine).
9. Merge the Transport Set within the Portal UI.
Till point 8 it should be easy to be done... and you may check the Portal Configuration Guide over the 10.4.8 Migrating Users and Groups - http://download.oracle.com/docs/cd/B14099_19/portal.1014/b19305/cg_imex.htm
On step 8 do something like the following:-
-- groups (dn)
update WWUTL_SEC_TX_GROUP$
set dn=replace( dn, 'dc=dev_domain,dc=com', 'dc=prod_domain,dc=com' )
update WWUTL_SEC_TX_GROUP$
set dn_hash = wwsec_api_private.get_dn_hash( dn )
-- users (dn)
update WWUTL_SEC_TX_PERSON$
set dn=replace( dn, 'dc=dev_domain,dc=com', 'dc=prod_domain,dc=com' )
update WWUTL_SEC_TX_PERSON$
set dn_hash = wwsec_api_private.get_dn_hash( dn)
If you do have the opportunity to test this, I'd be much appreciated in knowing whether you've achieved to get this sorted out. And even if there is something I may be missing then you may come back with your questions as I'll try to answer them to my best knowledge.
Alternatively, you can use the cloning notes within the Metalink website, what they do is a schema database export / import and there it IDs with be there. The only downside is that the export / import will do everything and Portal Export / Import is more flexible, ie, you may not be interested in bringging the whole Portal, but just a couple of pages or Page Groups.
I hope it helps...
Cheers,
Pedro.
PS - I hope all the above makes sense, but if not, just let me know (or detail me what do you want where I've failed to understand you).

One screw left over

I just completed replacing the bottom case, and upgrading the hard drive on my 12" G4. I used the instructions from iFixIt.com and found them very useful.
Everything is working, Leopard is installing on the new hard drive. But... I have one little 2.5mm screw left over. I have absolutely no idea where it came from... I followed the instructions to the letter. I guess I will keep it if I ever have to dig into the computer again.

Grashuepfer:
So long as everything else is working as it should I would not worry about it. And, yes, if you need to go back in for anything at a later date you can find where it needs to go in.
Cheers
cornelius

Left over objects from install?

Similar Messages

Maybe you are looking for