Left-Right Audio Balance

Couldn't find any discussion of this using "Search". I have a slight hearing loss in one ear. Consequently, when listening with headphones, there is a shift of the sound stage to the "better" side. There does not appear to be any adjustment for that in the iPod (as some speaker systems have). Does it seem feasible for Apple to include something like this in an update, or do I have to purchase some kind of external audio control?

Hello,
I had not yet heard of this iOS6 problem before. Try a reset, which will not erase any data or settings.
Reset the Device:
Hold the power button and the home button down until the device shuts off, then power it back on and see if the problem is resolved.
If this does not fix the problem, try doing it again while the music is playing and the slider option open. I have no idea whether that will work or not, but it's worth a shot.
I hope this helps you out.
~Lt. Leviathan

Similar Messages

  • How to Set Left/right audio channel while Video playback

    how can I controlling the left / right audio channel while video playback, I can't find any method or class for this in JMF, anyone that can direct me how to do it?

    The way I found to control two stereo channel is to implement a plug-in Effect that will control two volumes (left/right) indipandently.
    You can start from the example GainEffect from sun, and implement your control.
    For eample, if you want to mute the left channel, simply set to 0 all the odd samples (or even...I don't remember exactly, try it).
    You have then to add you plug in to the processor chain... again see the examples.
    More complex effects (panning etc) can be done in the same way, but it seems to me that it's quite CPU intensive.
    Bye
    Marco

  • Audio - left / right channel balance

    Is there a way to correct the balance between the left and right audio channels in iMovie 08? I have some video in which one channel is significantly hotter than the other - and I would like to get a good stereo blend, of course....
    Is there a solution?

    Thanks Bengt...
    So..
    1) I extracted audio, fixed it, and saved it.
    2) I made a copy of the video with the (bad) sound deleted.
    Now - it's a 60 minute video, but I want to be able to cut it into several pieces. So, do I have this right?
    a - create a new project with the video
    b - add sound
    c - export as movie
    d - create a new event with the "fixed" movie (now with the adjusted/corrected sound)
    e - create the new projects (the severals pieces I want)

  • Adjusting left/right sound balance

    I have some "play along" music tracks to practice playing musical instruments with. Many have just drums, bass and piano, with bass and piano panned to extreme left and right. To practice bass, for example, one adjusts the balance to extreme right to remove the bass part from the recording. I have not found a way to do this on my iPod or on iTunes. Is it possible?
    Either playing the right channel only (this is what a traditional balance control would do) or playing the right channel through both stereo channels would be good solutions. Alternatively, can one preprocess the track in some way to replace both channels by the right channel in the sound file itself?
    Unfortunately it isn't possible to adjust the balance on the iPod dock (with speakers) that I'm using.
    Many thanks in anticipation

    Well, keep experimenting with the left/right panning and the various parameters you can program into the reverb effect!
    There are no rules with regard to recording and mixing, but traditionally the bass drum, the bass guitar, and the lead vocal are mixed in the center, and the other instruments and harmony vocals are spread out to the left and right to varying degrees. The different drums in the drum kit are often panned to different positions mimicking the physical layout of the drum kit (left to right).
    As far as reverb goes, realize that you can set different amounts and kinds of reverbs on different instrumental and vocal tracks; you don't have to send every instrument to the same stereo reverb effect. If you do so, you'll lose the ability to position sounds where you want them to be. The other element is the wet/dry mix. When you send a sound to a reverb effect, you decide what percentage of the signal goes to the effect (wet) and what percentage bypasses the reverb and goes straight out to the left and right speakers (dry) according to the pan setting for that track.
    Listen to your CD collection. Pick some music that you like that is similar in style to what you are recording. Play a song over and over again and take note of where each instrument is placed in the stereo field. Then learn how to replicate that effect in your GarageBand tracks using panning and reverb. Studying well-recorded music is the best way to figure out how to do things on your own.

  • Left /right Channel balance

    Not a specific Logic question as such, more a general one on sound balance. Have been using a pair of Klipsch speakers for about a year now and have started noticing a decided swing of volume to the left hand channel when everything is set to centre like drums etc. Tried swinging a drum snare to the left and right and the right hand channel is just so much quieter to the point of al most losing the snare ! Tried it on my headphones and its the same. Could my mac be giving a hiccup?
    M

    Hi,
    You might do well in calibrating your audio outputs.
    Here's a quickie:
    1. Turn OFF your speaker system. Failure to do so will not only blow them up, it might get you evicted...or thrown out from your parent's...or the neighbor going after you with a shotgun, you get the picture. I won't be held responsible if you skip this step, and become deaf as a result.
    2. Open a blank Logic song, and make 1 track. Insert a tone generator plug-in,and set it to 0dB (the maximum output level). Make sure the pan is set to centered.
    3. check your audio device's output level meters. they should MATCH. If not, there is an issue with your audio device. consult the mfr to get this fixed ASAP. If this step is ok, move on to no.4.
    4. If you have a mixer after your audio device, look at the INPUT GAIN on the channels that your main outputs from your audio device are fed into. Put the left channel into SOLO, and calibrate the input gain so it clips, and tehn back it off just slightly, until no clipping occurs. Do the same for the right channel.
    5. Set the OUTPUT of the mixer faders to 0, and pan each channel hard left and hard right, respectively (ch1 left, ch2 right, etc.)
    6. Look at the mixer's OUTPUT meters. Do they match? If they do NOT match, you need to contact the mfr of the mixer, and have this fixed ASAP/ If they DO match, then proceed to step 7.
    7. Look at the amplifier that your speakers are hooked up to : does it have an INPUT gain knob? If it does, then you can calibrate your speaker amplifier. If it does not, REPLACE this speaker amp with one that DOES have input gain knobs. If it does have input knobs, you now can calibrate the speaker levels. Go to step 8.
    8. With a good SPL (Sound Pressure Level) meter, place the meter on a mic stand or other sturdy device, and place it in your mix position, pointing towards the exact middle of your speaker spread (exactly between the speakers). Turn the meter on, and set it to read 80dB sensitivity.
    9. Set your mixer's monitoring output (the one that turns the output up and down to your speakers) SLOWLY... until you get 80 dB on your meter.
    10. MUTE the right speaker output. You can do this on your mixer, by muting the left channel. then turn up the monitoring level up until you get the same 80dB. What is the level difference? Note this.
    11. MUTE the left channel, and turn on the right channel. turn up / down the monitorin levle until you reach 80dB. What is the difference? not this too.
    12. On the speaker gain knobs, notice where they are BEFORE you calibrate the speaker amplifiers.
    13. Put your monitor level back to about 10 am position. This one is the one on the mixer. NOt the one on the speaker amp!!!
    14. While still on the RIGHT channel only playback, notice where the level meter is now. Adjust the RIGHT speaker input so that it reads 80dB upon playback at the 10am position on the mixer monitoring knob.
    15. MUTE the Right playback, and turn on the Left channel playback. notice where the level meter is, and adjust the LEFT speaker input until you get the 80dB.
    16. Now, turn on BOTH Left and Right channels, and it should be louder than each channel separate.
    17. Adjust the monitor level knob on your mixer until you reach 80dB. MARK THIS SPOT.
    You now have a calibrated listening system.
    Enjoy

  • Left / Right audio out of sync on some files

    I'm working on an indie film project and audio was captured on a ZoomH1 and Rode Shotgun mic. We ingested the audio onto a 27" 2011 iMac workstation (Mavericks, 3.4 GHz Intel Core i7, 32 GB 1333 MHz DDR3, and AMD Radeon HD 6970M 1024 MB) and found that left and right were apparently out of sync somehow. That was strange as I have never had a problem like this before, even with the recording equipment we were using, but stranger than that, I handed the files off to an audio engineer who said there wasn't anything wrong with them. They sounded fine. So we sent them around some other places, and they all said the audio was fine.
    So I kept testing and I find if I select "Play stereo audio as mono" under accessibility options, I get a ghost track that doesn't seem to actually exist in the file. Like there was another microphone recording in the next room so we can hear lots of room noise and some very, very faint dialogue and a subtle kind of rhythmic beat. Like the dryer was on somewhere. Whatever the case, I can't find any evidence of this audio track in the actual file.
    So, the engineer did some mastering of some kind, running it through pro tools, and sent it back to me. And low and behold, they're still sounds out of sync. Like there's a bad echo. A little more tinkering, I find it only happens with these few files, and only when plugged into the audio out. Still no problem on any other Mac or PC. Just this one.
    I can't tell if this is a software problem or a hardware problem. I don't even know where to begin. Google searching this topic is a nightmare. Any suggestions?

    I'd be more concerned about the frame rate discrepancy.
    I'd suspect a hardware problem. If the audio goes to a mixer and the video to a switcher there will almost always be a loss of sync unless a delay is put into the audio path. There's usually a two frame delay going through the buffer in a video switcher.

  • How do I split Left & Right audio tracks?

    I recorded a presentation that only came out of one speaker (left)
    On my timeline, I'd like to delete the a2 portion, and copy the a1 portion into that.... so it comes out of both sides.
    I can't figure out how to delete one side without deleting both.
    They stay highlighted together when I click on them
    Thank you!!

    Strange thing, Tom!
    When I said Shift L would separate the 2 audio tracks, it did .............. on FCE 1.0.1, which I happened to have open.
    But of course it doesn't on FCE 4.
    Am I correct in noting this and has the functionality changed between FCE 1.0.1 and later versions ?

  • Left & Right audio channels not linked...

    I upgraded my system and had to re-install FCE from scratch and (of course) I lost all my system preferences and filters & such. My one annoyance now is that my audio channels (L & R) are now independant of one another -- if I lower one, the other remains unchanged and then I have to go lower it as well. Is there any way to re-link the two audio channels together? It was like that on my old system.
    Thanks.

    That much I figured out -- is there any way to make that a permanent setting when I capture? That's the part that's escaping me. Thanks for your help, BTW.

  • Inverted left-right audio out

    K7N2 Delta ILSR
    I remarked my audio out is inverted.....at the start i thought it was my headphones, but now i change it and the problem still there......
    Does anyone know how do i fix this ?
    Im using the latest drivers from MSI.......
    Its really annoying to have the sounds coming în the wrong side while u r playing.:(
    Thx.:-)

    Just to infrom the interest ppl with some kind of similar problem....
    I solved mine:
    My card reader (In-Win) has front audio out.....and was connected to the mainboard, causing that problem.....
    The strange is; before uninstall the front audio out i checked the connectrs and were ok (no inversion).
    Maybe the pin connectors r inverted and causing some trouble to the back out.....
    Anyway, thx for those who replied my problem....;-)

  • Laptop left Speaker audio not working

    Sir,
    I have dv-5 1102 tu model laptop, in that left speaker audio not working. But, in headphones & Speakers have no problem in both left & right audio.
    Kindly do the needful

    Hey @KKVK ,
    Welcome to the HP Forums!
    I understand your left speaker is not working on your dv5 notebook.
    If the headphones are working it would tell us the sound card is fine. The same properties are applied to the speakers and the headphones in your audio control settings.
    You could try a system restore to before the issue started to make sure it's not something in the operating system. To perform a system restore see the following guide: Using Microsoft System Restore (Windows 8) or Using Microsoft System Restore (Windows 7).
    If this fails I would suggest contacting HP Phone Support to send the notebook for service. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
    Thanks!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • HT4108 What is required to use the video composite out on the iPhone 4.  Left and right audio works ok

    What is required to use the video composite out on the iPhone 4   The left and right audio works ok

    Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES

  • My balance sounds horrible when is at the center ... it only happen when I plug my Headphones... if a move the balance to the left/right i have a mono sound in my headphonesleft/right

    My balance sounds horrible when is at the center ... it only happen when I plug my Headphones... if I move the balance to the left/right i have a mono sound in my headphones left/right

    I too am experiencing this issue after upgrading to Mavericks. Headphone audio balance seems to always stick to the far right. When moved to the center, it still only outputs sound to the right side. I have to constantly adjust the setting a little to the left of center for both sides to output sound equally.

  • Left - Right Balance

    I run iTunes with an external sound card (actually Tascam 428 surface controller), on which two active monitors. So I cannot fine tune the left-right balance with the system pref panel for sound, because it's not in use. The software controlling audio settings of the Tascam doesn't take this balance in charge either.
    Is there any possibility (or additionnal third-party software?) to set the L-R bal on this iMac? Any idea? Thank to all for any input. Henri

    Should I post this somewhere else? Or is it really utopia? Thks

  • Left / Right Channel Audio mixing?

    How do I mix the audio between the left and right audio channel?
    I have a bunch of tape imported, but the audio is only in the left channel, so I need to either balance the audio, or duplicate the audio in the right channel... thanks in advance!

    You should be able to do this by 'Exporting' your movie to GarageBand, and just making the one-channel audio the same on both channels.
    Alternatively, if you want to do extensive tweaking manually, do the following:
    0 - Download an audio editor such as 'Audacity'.
    1 - In iMovie, select the video clip(s) which you want to 'repair', and then use 'Extract audio' to separate the audio from the video.
    2 - Close iMovie, and use the usual Finder to locate your movie project, then Ctrl-click (or right-click) on the name of the project and choose "Show Package Contents".
    3 - Look in the 'Media' file which then appears, and you'll find all your audio clips. Copy them to your Desktop.
    4 - Start 'Audacity' and use File and Open to open the audio files, one by one, which are on your Desktop. Use these hints (intended for 'Sound Studio, but they work with 'Audacity', too, so click on 'Start Slideshow') to copy and paste one channel onto the other, then Save your work.
    5 - Take those newly amended files on your Desktop, and copy them back into the 'Media' folder within your project (see 2 and 3, above).
    6 - Reopen iMovie; the audio will now play correctly.

  • My ipod's music quality is inferior. It doesnt have the surround sound/ left and right audio channel unlike my brothers ipod? is there a problem with the chip?

    I have an ipod touch 4g (8GB), I got this about 2.5 months ago, the same time my brother get his. My problem is that I noticed that audio quality is better on his device than mine. I have been listening to music and had different music devices before (non-Apple product and mobile phone) and the quality of music is better when I used to listen to those devices as well as my brother's ipod touch. Im referring to the left and right audio channels. Im not so good about the technical stuff but the best explanation I can give you is in a music or a movie, there's an effect wherein you can here a sound only at the left ear phone/speaker that you cant hear at the right earphone/speaker. I mean for example in a song, a guitar intro can be heared only at the left
    ear while the background music plays on the other ear. Or when theres and echo effect on the song that alternates sound on the left and right ear. I hope youre getting what Im trying to say. Im bothered that my ipod is fake or has an internal problem on the chips or something because I didnt bought this at an Apple Center/Mac Center. I bought it on a retailer. I am not able to visit any store or Genius Bar  or contact an apple specialist through phone because of my work schedule and work load.  I have contacted the retailer before when I tried to return it for replacement or repair but he told me that it is under Apple's warranty, not theirs. I do hope that I can get a help from you because I want to really enjoy my device. Thank you and Im looking forward for the responce/assistance form you.

    I suggest you don't apply pressure to the screen - it's a Touch - you touch the screen not push it.
    Phil

Maybe you are looking for