Left & Right Margin from Top to Bottom

Friends,
I want Left & Right Margin (Line) from top to bottom even if there is a single item in the Repetitive area. Problem is that when there are less items there is always a gap between Repetitive Area/End of Report & Footer.
Regards,
Uday Shankar
Edited by: uday singh on Jun 13, 2008 5:30 PM

Hi,
We have also tried to the same requirement. But we can't.
Only one thing we can do is, the end report can be set at the bottom with the property of "Align to bottom". But the Horizonal, vertical lines and grid not fills from the last item to end of report beginning.
I think this is most required to view the document perfectly or neatly.
Particularly in indian localization this is the must since the customer need to be declared the specific neat format to the legal departments.
Hope SAP Support should solve the issue. But I am wondering this question has been posted many times by many people but unfotunately nobody I think get the solution.
Thanks & Regards,
Venkatesan G.

Similar Messages

Horizontal RSS feed- is it possible to create an RSS feed (showing both pictures and text), that scrolls from left to right rather than top to bottom?

I am trying to create an RSS feed that will scroll from left to right rather than top to bottom as is standard in iWeb. Ideally, I would like to show both images and text. I am actually using iWeb '09. I am not opposed to writing html code if necessary.
Thank you for your help!

Probleme solved without having to change anything in the flash.
The solution was to add a small part in the CSS in HTML
html {
overflow-x: hidden;
overflow-y: auto;
Solve probleme. All browser. VERY usefull to know !

Can I typeset Chinese in InDesign CC? The text goes from top to bottom and right to left.

Hi!
Can I typeset Chinese in InDesign CC? I have downloaded the Chinese version of InDesign CC, but couldn't get the text to go from top to bottom and right to left. Do I need to download some sort of plug-in for this type of work?
Thanks!

There's little to nothing Adobe Reader can do about this.
The free Adobe Reader cannot create PDF, cannot export PDF page content and cannot manipulate PDF page content.
What is "on" a PDF reflects what was "printed" to PDF from back in the authoring file.
It is within the authoring file where you must make adjustments.
A related "source" issue is what label stock is specifically supported by the authoring application.
While all vendors claim their stuff is alway the same as your stuff that is often not the case.
A 1/64 th of an inch or less difference will put a wooden shoe in the works.
Be well...

Is it possible to make the automatic scroll go left to right instead of top to bottom?

Hi all,
I find it hard to follow text when adobe is scrolling from top to bottom. Is there any way to make it scroll left to right instead?

user13392320 wrote:
Is it possible to make ODI process a source row by row instead of as a dataset?Yes it is, the Agent acts like a SQL cursor if you use a select on the source tab (in the IKM) and an insert on the target tab (same step in the IKM) it will read it row by row. You can tweak the batch fetch array sizes in the Agent configuration.
user13392320 wrote:
To make changes to the target table I need to join the source table to the target table. I want to process source records in a particular order. What will be loaded from the current source record will depend on the previously loaded, related source record, during this some run of my ODI job. And ideas? Thanks!Cant see why you cant drag the target table onto the source datastores and join them - carefully choose where you want the join to take place (probably in the target). If you want to order the records there are some Knowledge Module tweaks to specify an order by clause using the UD1 -> UD5 flags on a datastore. Search the forum or google for the code.
Hope this helps.
Alastair

I just jazzed up my 2 Ghz iMac with 10.6.8, and 4 gigs of memory. I'm VERY happy with the results (fast!), but now I have a thin yellow line way over on the right side of the screen, which goes from top to bottom. This is really strange! Any input?

I'm VERY happy with the results (fast!). However, the really strange thing is this - there is now a thin yellow line, way over on the right side of the screen, which goes from top to bottom, and stays there no matter where I go or what I do. I've never seen anything like this! It was not there before I did the upgrades. Anyone out there ever heard of such a preposterous thing ~ or have any ideas on how to get rid of it?

Hello Mark,
It's going to mean a lot of reading but you should study the 'More like this' legend to your post's immediate right. >>>>>>>> plus some of the links within each.
The problem is well explored with much guidance on what to do and where to go.

Intencity Chart - how to change scan mode from top to bottom

Hello,
I need update my Intencity Chart from top to bottom.
Please tell me, can I do this?
Thank you.
With best Regards,
Dmitry.

Dmitry,
This link is the LabVIEW help for the Intensity Chart Properties Dialog Box. As you can see under Appearance > Update Mode there are three update options. All three options are left/right viewing.
This link is the LabVIEW help for the Update Mode Property, which gives more information about the property.
These two links give you the information on how to choose one of the three methods to update your Intensity Chart.
David A.
National Instruments
Applications Engineer

Firefox upon opening an image in a new tab, centers the image from top and bottom and surrounds the image with a grey frame. Just started having the problem today, searched Google to no avail.

Firefox upon opening an image in a new tab, centers the image from top and bottom and surrounds the image with a grey frame. Just started having the problem today, searched Google to no avail.

Oh wow, looks like a new feature.
The "page" links in a stylesheet with the address "resource://gre/res/TopLevelImageDocument.css". If you remove that reference, then the image displays in the old style.
'''''Edit: Please skip the rest of this post and check out the next one.'''''
There might be a more elegant solution than that, but you could use a bookmarklet to strip out that link when you want to view the page in its old style. A bookmarklet is a snippet of JavaScript you save on the Bookmarks toolbar for quick access.
First, copy the following code to the clipboard (it's all one long line):
<br>javascript:var ssheet=document.querySelector('link[href="resource://gre/res/TopLevelImageDocument.css"]'); if(ssheet)ssheet.parentNode.removeChild(ssheet); void 0;
Next, if you are not displaying the Bookmarks Toolbar, use View > Toolbars > Bookmarks Toolbar to display it. (If you aren't using the classic Menu bar, press Alt+v to call up the old View menu. Right-clicking the gray area just below the page address also allows you to display the Bookmarks Toolbar.)
Right-click on the Bookmarks Toolbar (or Mac equivalent of right-click!) and choose New Bookmark.
Paste the code into the Location box (the second box).
Then type a useful name in the Name box (e.g., Oldstyle Picture) and click Add.
Now, when you want to tweak the image display, click the button to run the script.
Manual clicking is a hassle, so it might make sense to look into other solutions. (Greasemonkey didn't seem to work; I think it might not run on .jpg files.)

X220 dead pixels from top to bottom

I have had my X220 Tablet for 18 months (purchased November 2011), my one year warranty expired (received no notification it was going to expire back in Nov 2012) but had no problems at all during these 18 months.
Now, I just turned it on today (July 3rd, 2013) and had a vertical blu-green line from top to bottom at 18.5mm from the left side of the screen. I figure a whole line of pixels of one color (red) had gone off, so it is not a single pixel, it is a whole line.
I use this convertible tablet about 20% of my time, my workhorse is provided by my workplace (a Dell convertible tablet). So I was surprised that with so little use the screen has gone bad so soon, and just six months after warranty has expired, and it seems it may get worse.
I also thought when I purchased it that the screen was LED, then found that it is a LCD with a LED backlight.
Is the only solution to replace the IPS screen (it's has a multitouch panel)? or is there a software or BIOS solution?
And if the solution is the replacemente, approximately how much the replacement screen costs?
Any help, suggestions are appreciated.
AzaelB

Welcome to the forum!
The LCD panel will have to be replaced, I'm sorry to say.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

My PC has blue screened twice in the past week so I force quit it it came back on a few times after that it is now grey screening with inch wide blue lines from top to bottom the apple logo is there and it is trying to boot up but nothing happening

My Mac has blue screened a couple of times this week it started to work a couple of times after that but now it is grey screening with inch wide blue lines from top to bottom the apple logo is also there it is trying to boot up again but won't. Not sure don't know anything about how to fix things but I suspect the fan has stopped working as I can't hear one. The problem I have I now live in Turkey and I am 1000 km from the nearest apple shop which is in Istanbul I believe and I now live in Didim, Altinkum I don't trust the everyday Turkish shop to take it to as they will tell you they know how to fix it but will probably make it worse, typical in Turkey. Please can someone help as we use it for our business and obviously I need it up and running ASAP I am using IPad and iPhone at moment but can't access my files which are on PC.

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

International warranty: face glass with hairline crack across the face: My local icenter says that if the hairline crack was from top to bottom then it would be covered by the warranty

Hi
I have been to my local icenter in Malta because of a hairline crack across the face of my newly purchased iphone 5c. They say that it will only fall under the warranty if the crack was from top to bottom and not across. Is this correct?
Thank you

Did you contact your carrier about that? Your carrier will service the phone for you in Malta, and they can probably tell you more about that problem.
Apple - Support - Service Answer Center

How do I get photos to be organized in lightroom such as moving one from top to bottom....etc

Hi, Can anyone help me? I need too know how to move pictures around in lightroom., Such as moving 1 from top to bottom or in the middle to the bottom?

If you create Collections in Lightroom, you can simply drag the photo to wherever you want it to be within the Collection.

Scrolling is very slow and looks like it's re-rendering from top to bottom on each scroll.

After downloading Firefox 4, scrolling isn't work well. Each time I scroll up or down, the page looks like it's re-rendering by wiping from top to bottom. Takes about 2 seconds to so before I can scroll any further. There's no smoothness to scrolling like there was in the past.
I tried downloading new graphics drivers, but that didin't fix the issue. I tried checking "smooth scrolling" in advanced options, but that made it worse.

Update the video display driver to the latest version.
* https://support.mozilla.com/kb/How-do-I-upgrade-my-graphics-drivers
Try to disable hardware acceleration in Firefox 4.0:
* Tools > Options > Advanced : General: Browsing: [ ] "Use hardware acceleration when available"

M40-237: small lines from top to bottom on the screen

I have installed DirectX 9c Feb 2006.
When I'm Trying to play a game , in the center of the screen there are small horz. lines from top to bottom.
How can I solve this problem ?
Thanxs.

Hi
Before you try to solve it you must find out why this happen. As far as I know this unit is delivered with DirectX V9.0C. Did you have this problem before latest DirectX installation?
Are those lines there just when you start the game or all the time?

Cp6 - effects (how to fade in from top to bottom?)

Hello all,
I am attempting to simulate an effect I often used in Lectora. I used this effect on text bullets where the text would slowly appear (fade in) one line at a time from top to bottom.
Is there a similar effect in Captivate 6. I gave up looking for it.
Also, has anyone bothered to catalog and demonstrate all the effects available in Captivate 6? If not, perhaps I will take on this project next month.... seems worthwhile.
Thank you,
Shawn

Thank you for your response Lieve.
Lilybiri wrote:
Please: http://lilybiri.posterous.com/list-with-effects-in-captivate-555-thank s-col
They didn't change in CP6
You have to make each line a separate Text container (caption or smart shape) and apply the effect on each line, stagger them on the timeline
Lilybiri
The list is great...
I suspected that was the only way. That is far too much work for all the bullets that I would like to animate. I'll have to do without.
But I appreciate your post.

I opened my brand new MacBook Pro the other day and noticed a straight green line from top to bottom near the center of the screen. What is it from and how do I get rid of it????

I am having a problem with my brand new MacBook Pro. After opening my laptop the other day I noticed a straight green line from top to bottom near the center of the screen. What is this from and how do I get rid of it? It is most annoying. Please Help!

"What is this from and how do I get rid of it?"
Such symptoms bode serious hardware issues and you shouldn't think about fixing it yourself when you are still in waranty. Get to an Apple Store, like the other poster suggests.

Left & Right Margin from Top to Bottom

Similar Messages

Maybe you are looking for