Left, Right or center justified. Need some help

Hi,
I have to do an assignment in which i am asked to read a file containing text of strings. I have to set some properties for my implementation class so that i will get the output in desired format i.e
left, right or center justified.
Can anybody tell me the documents or the classes to go through. i am new to java. Please reply me.
Thanks
Rita

ya, i know how to read the file and probably print them to the console Good!
but i dont know how to print the output in right- justified manner.
The output is by default left-justified, but i dont know how to do right-justified.Okay, you need to do some padding (justification). Check out the stuff in StringBuffer (and StringBuilder, in 1.5) and String. Questions about padding/justification come up on the forum all the time (did you try searching?). Basically, you have to decide the full length you want (e.g., 100 characters), and then prepend/append the proper number of spaces to the original String.

Similar Messages

  • Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

    Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
    Already gone through troubleshooting guide a zillion times. Thanks.

    This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
    I got my artwork and saved it to my Desktop
    Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
    Clicked "resize" and a box for changing it opened up
    Checked the box "Pixels" and "Unchecked maintain aspect ratio"
    Set Horizontal for 640 and Vertical for 480
    Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
    It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
    Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
    Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
    Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
    Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

  • Please I need some help with a table

    Hi All
    I need some help with a table.
    My table needs to hold prices that the user can update.
    Also has a total of the column.
    my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
    I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
    I have tried using but as I need to set the toal with something like total
        totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
    Can any one please advise on some way I can get this to work ?
    Thanks for reading
    Craig

    Hi there camickr
    thanks for the help the other day
    this is my full code....
    package printing;
    import java.awt.*;
    import java.awt.event.*;
    import java.awt.print.*;
    import javax.swing.*;
    import javax.swing.table.*;
    import java.text.DecimalFormat;
    public class tablePanel
        extends JDialog  implements Printable {
      BorderLayout borderLayout1 = new BorderLayout();
      private boolean printing = false;
      private Dialog1 dialog;
      JPanel jPanel = new JPanel();
      JTable table;
      JScrollPane scrollPane1 = new JScrollPane();
      DefaultTableModel model;
      private String[] columnNames = {
      private Object[][] data;
      private String selectTotal;
      private double total;
      public tablePanel(Dialog1 dp) {
        dp = dialog;
        try {
          jbInit();
        catch (Exception exception) {
          exception.printStackTrace();
      public tablePanel() {
        try {
          jbInit();
        catch (Exception exception) {
          exception.printStackTrace();
      private void jbInit() throws Exception {
        jPanel.setLayout(borderLayout1);
        scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
        this.add(jPanel);
        jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
        scrollPane1.getViewport().add(table);
        jPanel.setOpaque(true);
        newTable();
        addToModel();
        addRows();
        setTotal();
    public static void main(String[] args) {
      tablePanel tablePanel = new  tablePanel();
      tablePanel.pack();
      tablePanel.setVisible(true);
    public void setTotal() {
      total = 0;
      int i = table.getRowCount();
      for (i = 0; i < table.getRowCount(); i++) {
        String name = (String) table.getValueAt(i, 1);
        if (!"".equals(name)) {
          if (i != table.getRowCount() - 1) {
            double dt = Double.parseDouble(name);
            total = total + dt;
      String str = Double.toString(total);
      table.setValueAt(str, table.getRowCount() - 1, 1);
      super.repaint();
      public void newTable() {
        model = new DefaultTableModel(data, columnNames) {
        table = new JTable() {
          public Component prepareRenderer(TableCellRenderer renderer,
                                           int row, int col) {
            Component c = super.prepareRenderer(renderer, row, col);
            if (printing) {
              c.setBackground(getBackground());
            else {
              if (row % 2 == 1 && !isCellSelected(row, col)) {
                c.setBackground(getBackground());
              else {
                c.setBackground(new Color(227, 239, 250));
              if (isCellSelected(row, col)) {
                c.setBackground(new Color(190, 220, 250));
            return c;
        table.addMouseListener(new MouseAdapter() {
          public void mouseClicked(MouseEvent e) {
            if (e.getClickCount() == 2) {
            if (e.getClickCount() == 1) {
              if (table.getSelectedColumn() == 1) {
       table.setTableHeader(null);
        table.setModel(model);
        scrollPane1.getViewport().add(table);
        table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
      public void addToModel() {
        Object[] data = {
            "Price", "5800"};
        model.addRow(data);
      public void addRows() {
        int rows = 20;
        for (int i = 0; i < rows; i++) {
          Object[] data = {
          model.addRow(data);
      public void printOut() {
        PrinterJob pj = PrinterJob.getPrinterJob();
        pj.setPrintable(tablePanel.this);
        pj.printDialog();
        try {
          pj.print();
        catch (Exception PrintException) {}
      public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
        Graphics2D g2 = (Graphics2D) g;
        g2.setColor(Color.black);
        int fontHeight = g2.getFontMetrics().getHeight();
        int fontDesent = g2.getFontMetrics().getDescent();
        //leave room for page number
        double pageHeight = pageFormat.getImageableHeight() - fontHeight;
        double pageWidth =  pageFormat.getImageableWidth();
        double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
        double scale = 1;
        if (tableWidth >= pageWidth) {
          scale = pageWidth / tableWidth;
        double headerHeightOnPage = 16.0;
        //double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
        //System.out.println("this is the hedder heigth   " + headerHeightOnPage);
        double tableWidthOnPage = tableWidth * scale;
        double oneRowHeight = (table.getRowHeight() +  table.getRowMargin()) * scale;
        int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
        double pageHeightForTable = oneRowHeight *numRowsOnAPage;
        int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
        if (pageIndex >= totalNumPages) {
          return NO_SUCH_PAGE;
        g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
    //bottom center
        g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages),  (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
        g2.translate(0f, headerHeightOnPage);
        g2.translate(0f, -pageIndex * pageHeightForTable);
        //If this piece of the table is smaller
        //than the size available,
        //clip to the appropriate bounds.
        if (pageIndex + 1 == totalNumPages) {
          int lastRowPrinted =
              numRowsOnAPage * pageIndex;
          int numRowsLeft =
              table.getRowCount()
              - lastRowPrinted;
          g2.setClip(0,
                     (int) (pageHeightForTable * pageIndex),
                     (int) Math.ceil(tableWidthOnPage),
                     (int) Math.ceil(oneRowHeight *
                                     numRowsLeft));
        //else clip to the entire area available.
        else {
          g2.setClip(0,
                     (int) (pageHeightForTable * pageIndex),
                     (int) Math.ceil(tableWidthOnPage),
                     (int) Math.ceil(pageHeightForTable));
        g2.scale(scale, scale);
        printing = true;
        try {
        table.paint(g2);
        finally {
          printing = false;
        //tableView.paint(g2);
        g2.scale(1 / scale, 1 / scale);
        g2.translate(0f, pageIndex * pageHeightForTable);
        g2.translate(0f, -headerHeightOnPage);
        g2.setClip(0, 0,
                   (int) Math.ceil(tableWidthOnPage),
                   (int) Math.ceil(headerHeightOnPage));
        g2.scale(scale, scale);
        //table.getTableHeader().paint(g2);
        //paint header at top
        return Printable.PAGE_EXISTS;
    class TableRenderDollar extends DefaultTableCellRenderer{
        public Component getTableCellRendererComponent(
          JTable table,
          Object value,
          boolean isSelected,
          boolean isFocused,
          int row, int column) {
            setHorizontalAlignment(SwingConstants.RIGHT);
          Component component = super.getTableCellRendererComponent(
            table,
            value,
            isSelected,
            isFocused,
            row,
            column);
            if( value == null || value .equals("")){
              ( (JLabel) component).setText("");
            }else{
              double number = 0.0;
              number = new Double(value.toString()).doubleValue();
              DecimalFormat df = new DecimalFormat(",##0.00");
              ( (JLabel) component).setText(df.format(number));
          return component;
    }

  • Need some help after inserting CMS system

    Hi on my site ive inserted an CMS system from Cushy. It all work that isnt the problem. The problem is that my page is a mess now.. The only thing ive addes is a cms code so im hoping the solution isnt hard to do.
    There are three pages that are complete changed.
    The home page
    http://www.vakantiewoningeninsuriname.nl/index.html
    The text colomn right under is moved.How can i place this back?
    on http://www.dorff.nl/ you can see how it was before i add the CMS.
    The next page is:
    http://www.vakantiewoningeninsuriname.nl/bezienswaardighedenparamaribo.html
    You can see there is a lot extra space between the head and the text. And you see that the text is not only at the right side anymmore.
    This is how it should be:
    http://www.dorff.nl/bezienswaardighedenparamaribo.html
    The same goes for this page:
    http://www.vakantiewoningeninsuriname.nl/prijzen.html
    And this is how it have to be:
    http://www.dorff.nl/prijzen.html
    Hope you can help, thank you for looking..
    Regards Brian

    Dear Nancy,
    Thank you for your response,
    I will try to explain again what is wrong. On my site you see this page:
    http://www.vakantiewoningeninsuriname.nl/prijzen.html
    Problem is that the picture below is on the right side of the page instead of the left like the other pictures.
    On:
    http://www.dorff.nl/prijzen.html
    You can see how it should looks.. Pictures to the left and text on the right. Dont know what happened when im adding the Cuschy CMS. Hope you can see what is wrong.
    Regards Brian
    Date: Wed, 2 May 2012 13:04:14 -0600
    From: [email protected]
    To: [email protected]
    Subject: Need some help after inserting CMS system
        Re: Need some help after inserting CMS system
        created by Nancy O. in Dreamweaver - View the full discussion
    Change this:
    Prijzen
    Bij ons kunt u terecht met elk budget. Wij hebben woningen voor mensen die een langere tijd blijven maar ook voor vakantiegangers. Daarom hebben wij verschillende prijzen gehanteerd.
      to this: <!Begin CushyCMS>
    h2. Prijzen
    Bij ons kunt u terecht met elk budget. Wij hebben woningen voor mensen die een langere tijd blijven maar ook voor vakantiegangers. Daarom hebben wij verschillende prijzen gehanteerd.
    <!end CushyCMS>   Nancy O.Alt-Web Design & PublishingWeb | Graphics | Print | Media  Specialists  http://alt-web.com/http://twitter.com/altweb http://alt-web.blogspot.com/
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4374962#4374962
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4374962#4374962. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Stupidly partition hdd on window7 in IMAC A1311, and now I can not use the IMAC...... Need some help

    Just bought a used IMAC A1311 core 2 duo, and there are something called Bootcamp and Window7 on it, and i log in to Window7 and stupidly partition hdd on it, and i think it has formatted everything. now the window7 is error and I do hold (alt) key when I start up the machines , it show only the window7 hdd  and i don't see any Recoery HDD........what should i do? Really need some helps right now.........

    There are several models that use A1311. So I don't know exactly what model you have. If you received installer discs with the computer, then you will need to boot from Disc 1, erase the drive, and install Snow Leopard. Some models in the A1311 line can use Internet Recovery:
    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.

  • My airport problem has returned big time --Need some Help!!

    Aloha once again:
    I though that this was fixed by simply changing channels on my airport router, but that fix only lasted for a few days, but now it's back and even worse. Let me give you some background on this problem. Here's my original message concerning the problem:
    I have my Airport Router connected to the Internet via DSLcable. I then tie my two computers into the internet via their airport cards. For about 6 months this system has been working just fine. Recently my desktop computer quit listening to the router and can no longer connect to the internet. It shows no signal strength and the name of the network on the Airport is not seen in the "connect to internet" panel. The same Airport works just fine on my LapTop and I am using it right now to get this message off to the internet.
    I have fixed permissions, removed the airport card and cleaned the connector, the antenna plug and removed the system configuration folder from library preferences all to no avail!
    This problem has been hounding me, intermittently, for over a year now What can I do to remedy this??? HELP!!!!
    Dan Page
    Maui, Hawaii
    The suggestion to change channels, that came from this original request, worked but just for a very short time. Now I have to shut down my computer overnight to get connected and then it only lasts for several hours and the connection quits.
    I thought maybe heat was a problem, but the last time it happened I opened the computer and played a large fan right on the card. This did not help. I shut it down for the night and it was fine the next morning for about 2 hours.
    One new data point; if I turn off just the airport on my laptop computer overnight, that will fix the problem for a short time also.
    Still need some help!!!
    Dan

    First, power off both the Time Capsule and AirPort Express.
    Wait a few minutes, then power up the Time Capsule first, and let it run for a few minutes.
    Temporarily, move the AirPort Express to the same room or close proximity to the AirPort Express and power it up.
    If the Express powers up correctly, power it off again and move it approximately half the distance between the Time Capsule and the general area that needs more wireless coverage. Try to minimize obstructions like walls, ceiling, heavy furniture, etc as much as possible. 
    Please report on your results.

  • Hi, can anyone help me out with this, I need some help on designing GUI for e-learning coursewares. Some tutorials or some helpful sites will do.

    I need some help with the GUI design.

    Have you tried the line inputs on the back of your FirePod? If you update its firmware (not sure if you will need to or not), I seem to remember hearing that the FirePod can run without FW connection, i.e. stand alone. In this mode with the outs from your mixer into line ins 1-2 (2nd from left on the back) it should work fine. I say should because I have never tried. However, these are used for returns from an external effects unit. I assume here, and the important word is assume, that there are two so that they can be used as a stereo send or as a mono send. Worth a try! Let us know how it goes.
    Best, Fred

  • Need some help in LiveCycle Designer ES 8.2

    Hi i need help with tables in livecyckle.
    Example. I create one table with 32 rows and 8 numretic cells, and another table below with 1 row and 8 numretic cells.
    In the big table i can input numbers and working fine.
    now to my problem. Ex, i want to input number 12 in row 1 cell 3.and then again same number 12 in row 2 cell 3 and i want the result (24) in table 2 row 1 cell 3. is there anyboby who can help me with that See below
    Header 1
    Header 2
    Header 3
    Header 4
    Header 5
    Header 6
    Header 7
    Header 8
    12
    3
    5
    12
    7
    9
    4
    Header 1
    Header 2
    Header 3
    Header 4
    Header 5
    Header 6
    Header 7
    Header 8
    4
    24
    10
    14
    Best regards    Stig

    Hi again Steve and thanx for the reply..send you a coupie of my file.
    All text on it is in swedish so i can explain a little for you.
    Text Veckodag is Weekday,Tim is hours. Frånv. is a shortname for sickness,
    Dagtid is daytime Kväll is evening, Helg is weekends, Afton is Big weekend
    like christmas day, s-helg is a shortname for big weekendsdays like day
    after christmas day, Jour is jour. The field to the left with numbers is
    date. Totalt is total
    The only fields i need some help with is the field from Tim to Jour. And the
    result should apear in the last fielt Totalt
    Can also tell that im not so good in english but im learning. And the last
    thing of all :Happy easter to you and thanxs again.
    Stig in sweden My E-mail adress is [email protected]

  • The backup disk image "/Volumes/Data/David Witkowski's Mac Pro.sparsebundle" is already in use.  Whenever Time Machine starts to backup to Time Capsuel I get the previous error message. I need some help to fix this.

    The backup disk image “/Volumes/Data/David Witkowski’s Mac Pro.sparsebundle” is already in use.  Whenever Time Machine starts to backup to Time Capsuel I get the previous error message Where can I find this disk image?. I need some help to fix this.
    Thanks,
    David W

    There are multiple answers and solutions if you look just to the right under the heading of More Like This.

  • Need some help! My iPhone 4 cannot play music through it's built in speaker, only with headphones. I also cannot adjust volume, it only shows "ringer". I really do not know when it starts. I already clean the jack and dock,reset it. Update it to IOS 7.1.1

    Need some help! My iPhone 4 cannot play music through it's built in speaker, only with headphones. I also cannot adjust volume, it only shows "ringer". I really do not know when it starts. I already clean the jack and dock,reset it and still cannot be fixed. I updated it to IOS 7.1.1 recently only, does it have connection with the inconvenience I am experiencing right now? What should I do? Thanks!

    Hi Melomane1024,
    If you are still having issues with your iPhone’s speaker, you may want to look at the steps in this article -
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS5180
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Trying to make a photo contest need some help

    Trying to make a photo contest need some help. I am running a
    fish photo contest on my website and was wondering if any of you
    could give me some advice on some good extensions to help me do
    this easier. Basically I want a page where people upload a file and
    then it automatically resizes the image and puts it on a page,
    where people can vote on the pictures.

    Hi Pilot,
    Column B contains the sale amounts.
    Column C will contain the tax amounts.
    I'm assuming a header row, and the first line of data to be row 2.
    In C2, enter: =B*20%
    Click Accept, then use the mouse to drag the small round handle at the lower right of the selected cell (C2) to fill the formula into the rest of the cells in column C.
    This simple version of the formula will put zeros in all column C cells where no amount has been entered in the corresponding cell in column B. The revised formula below takes care of that.
    C2: =IF(B,B*20%,"")
    I'd strongly suggest that 'rookies', as you describe yourself, download and read both the Numbers User Guide and the Functions and Formulas User Guide. Both are available from the Help menu in Numbers. If you use Pages and Keynote, you should use the Help menu in those applications to download their User Guides as well. The guides are searchable pdf files, well written, easy to read, and useful to rookies and old hands as well.
    Regards,
    Barry

  • Need some help with: implement email notification on note board within a page layout (javascript)

    Dear all,
    I have a quite specific issue in which I'm in need of some guidance and help!
    Within our SharePoint I have created a custom page layout. This is a simple page to post some content (news) and a standard Note Board is implemented.
    Every time a news item is placed, this is done by our communication departement, this page with standard layout is placed as a page in a page library. When there are no comments on that particular item/subject I found a solution to replace the standard SharePoint_no_posts-text
    by placing a contenteditor web part in the Page Layout with a reference to a textfile with some javascript in it. This works perfectely.
    The only thing left is that I want to automatically send an email to the contact (which is defined when making the news item) everytime someone posts a new comment. Here is where I need some help!
    We don't really use mysites so I was wondering if someone could tell how I could do this by for example some code (javascript) which I can implement in the Page Layout.
    Can anyone help me?
    Thanks in advance,
    Gr Matt

    Try below code:
    function sendMail() {
    var link = 'mailto:?subject=insert subject line&body=';
    var curntLoc=window.location.href;
    link +=escape(curntLoc);
    window.location.href = link;
    // window.location.href = link;
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9cfe7884-fc9e-4c7c-a44c-f740d2edcafc/sending-email-using-javascript-in-sharepoint-2010
    Also check below:
    http://spjsblog.com/2010/06/16/send-email-with-javascript-with-the-help-of-a-workflow-in-a-dedicated-send-email-list/

  • Need some help with ".png" image.

    Good day everyone. Here's the run down. I need to add an
    image (image "A") ontop of another image (image"B"). Image "B" is a
    paterned background. And Image "A" a logo with a transparent
    background.
    As it stands I have image "A" as a "png" and as you know....
    they are fri**ing huge! Haveing it as a "gif" only presents me with
    the IE6 problem of it adding a colored background to the image.
    So I'm stuck! Can any one tell me or point me in the
    difection of a tutorial to tell me the best way to add an image
    with a transparent background in Dreamweaver.
    Really need some help with this!
    Thanks all!

    >Right you can see the work in progress here>
    http://www.stclairecreative.com/DoughBoys_Site_Folder/home.html
    Before going much further I'd recommend reconsidering the use
    of a textured background. They are usually included for the benefit
    of the site owner only, and likely to annoy visitors. Studies on
    the subject suggest they often lead to usability problems. I do
    like to header graphic, but at 200K it's kinda heavy and can
    probably be optimized.

  • Need some help with sound quality

    Hi guys, new here. I'm working on creating an album on my own. Bass and vocals are real, everything else is using software instruments. I have about 8 songs done, but the problem is I don't really know what I'm doing as far as recording and levels go.
    I'm using studio headphones and everything sounds fantastic through them, and even pretty good if I just hook up some earbuds, but when I bounce out a track and burn them to do a disc and play it in my car, it sounds awful. Suddenly the guitar is too low, drums are too loud.
    I really need some help here. I'm even willing to pay someone to get me on the right track. Using paypal or whatever.

    AecDuck wrote:
    Where's the fun in that? Maybe you have different motives, but I got into home recording because I like doing things myself, even if I have to learn the hard way. If you know enough to get good bass and vocal recordings and mix that with virtual instruments, then you are well on your way to making a decent sounding mix. Mixing in headphones can be very deceiving. Things simply sound different in headphones. You need some monitors, even if they are crappy because if you can get it to sound good in crappy monitors it will likely sound good on other speakers.
    The fun and experience comes from getting a good balance that sounds good in headphones, and in the monitors, and in your home stereo, and in your car stereo. Use the different audio systems as a reference. If the drums are too quiet in the car, bring them up a bit. If the bass is too loud in your headphones, put them down a bit.
    If you bring in your recordings to be mixed by somebody else, first of all you're going to end up paying hundreds, if not $1000+ dollars, even in a sub-par studio. Secondly, it's never going to sound how you want it to sound. It's going to sound how THEY want it to sound.
    I know it takes longer, and it's hard work, but you will have such a tremendous amount of satisfaction when your project is done knowing that YOU recording it, and YOU mixed it on YOUR equipment. It will be 100% yours.
    Where's the fun? How about the fun in interacting with another human being? How about the satisfaction in having another validate what you've been trying to produce?
    I don't think it's helpful to make generalizations about what type of experience the OP might have in getting professional help. I have had good experiences working with mixing engineers, and perhaps I have just been lucky, but I've been able to produce music that sounded how I wanted it to sound, but at a level beyond which my skill at the time would have been able to produce, AND I gained some insights to help me in the future.
    It IS satisfying to teach yourself a new skill. And it takes a lot of patience, trial and error, and you might miss the mark more often than you hit it. If you're in a rush, it might be a viable solution to contact some studios and see if you can work with them. Learning from others is perfectly acceptable.

  • Need some help with region position

    Hi,
    I need som help with regions position....
    Background:
    I have 2 regions, I will call them reg1, reg2 and reg3.
    reg1 = Page Template Body (2. items below region content), column 1, search region.
    reg2 = Page Template Body (2. items below region content), column 2, import file region.
    reg3 = Page Template Body (3. items above region content), column 1, search result, grid region, very wide.
    Issue with the position, the setup explained makes my layout like this
    reg1--------------------------------reg2
    ------------------reg3--------------------
    What I want:
    reg1-reg2
    ------------------reg3--------------------
    What am I doing wrong?
    Regards Daniel

    Daniel,
    this will also work:
    Region1 HTML table cell attributes
    width="10%"
    Region2 HTML table cell attributes
    align="left"
    without touching the page template.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://htmldb.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

Maybe you are looking for

  • Trouble Installing Camera Raw 4.1 on Windows Vista Computer

    I have CS3 and I used Adobe Updater to upgrade to Camera Raw 4.1. I already have 4.0 installed. For some reason, I get an error when I try to install 4.1. The updater gives no reason, just that it cannot (after several tries) install 4.1 on my comput

  • Siri mic starts and stops in 1 second

    Hi all, So, - quit messages app to clear it out - I start the Messages app - click on a person - then click at bottom to message area - then click on MIC for dictation - 1st time siri starts - then stops after 1 second - then after that I try again a

  • Error msg to close Bridge

    I am trying to download PS CC and at the 42% download, I get a message to close Bridge.  I don't have Photoshop or Bridge open.  How do I get around this message.

  • HT201413 Unable to sync my ipod to itunes because I "do not have enough access privilieges for this operation"

    Getting message that I don't have enough access privilege for this operation to sync my IPOD nano to my PC thanks, Harrison

  • Cam 6.9 web login RESOLVED

    Hi , we have tried to install a new cam 6.9 on linux and then on windows , but we encontered the same problems . Cannot login on the web gui java web console using root with root password on linux and Administrator using Administrator password on win