Left USB and Right USB work differently ?

I v a USB sound cart (MBox 1 by digidesign)
Wen I use togeteher with it an external hard disk connected with USB (some time the fire wire is occupied by another hard disk) if the USB hard disk is on the left side (looking the screen) and the MBox on the right...the hard disk start making a "periodic" sound similar to a metronome and it doesn't run....if I invert the positions it work fine.
Is this normal ?
tanx
Shiama

I had this problem about 2 weeks ago. I called digidesign and told them my mbox was not working properly i kept getting the error message about increasing buffer size. they said that the usb ports on the mbp's are different and digi does not support the usb port on the right. so i tried the left and it hasn't given me problems since. although now i just got a new replacement so hopefully it will still work. on the online protools manual it said digi doesn't support the left usb port on the mbp.

Similar Messages

HT4108 What is required to use the video composite out on the iPhone 4. Left and right audio works ok

What is required to use the video composite out on the iPhone 4 The left and right audio works ok

Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES

Move to previous or next magnified photo Press Left Arrow and Right Arrow keys does not work

Move to previous or next magnified photo
Press Left Arrow and Right Arrow keys
This command no longer works in iPhoto. The photo just bounces for a moment, then all the photos begin scrolling. I used to be able to just hit the key to scroll one at a time.

What version of iPhoto and system are you running? What mode are you in, edit, full view, full screen, ???
OT

Do Flash Player runtime and AIR runtime work differently?

This question is asked as a follow up from a recent discussion, http://forums.adobe.com/message/6260447#6260447, regarding how getObjectsUnderPoint() works. The discussion was marked as correct as the answer provided by kglad was correct for the question asked.
But, the problem that led to that thread was not solved, as from the tests done, the issue was not from the method but from the runtimes. With the sample code given by kglad, the compiled swf file was working as intended by kglad. But the same code was not if compiled and packaged to AIR runtime.
Thus the question, do Flash Player runtime and AIR runtime work differently? Or again, that I simply missed out something?
*Edit: Anyone with similiar experience?

I'm also using Safari 6.0.1 and I don't have this problem, so I doubt Safari's causing the problem.
Have you tried uninstalling flash completely and then reinstall? If you haven't, here's Adobe's instructions on how to do so: http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
Once you've uninstalled it, try redownloading and reinstalling again: http://get.adobe.com/flashplayer/
Morgan

Left pane and right pane(Multiple Panes/Multiple Views) in single FACET

Hi All,
Please suggest how can we add left pane and right pane(Multiple Panes/Multiple Views) in single FACET , Do we need to create mutiple custom BO's or single custom BO is enough.    Is it feasible requirement to place mutilple panes/views in a single FACET.   Please suggest.
Thanks in advance.
Tim

Hi,
   Use Back Satement for that.
ex.
DATA: TOWN(10)      VALUE 'New York',
       CUSTOMER1(10) VALUE 'Charly',
       CUSTOMER2(10) VALUE 'Sam',
       SALES1 TYPE I VALUE 1100,
       SALES2 TYPE I VALUE 2200.
RESERVE 2 LINES.
WRITE: TOWN, CUSTOMER1,
      /       CUSTOMER2 UNDER CUSTOMER1.
BACK.
WRITE: 50 SALES1,
       / SALES2 UNDER SALES1.
Reagrds,
prashant

Role of left input and right input in merge join

Hi All
I really appreciate if someone explain me the difference between left input and right input in Merge Join.

Think it in terms of transact sql join statement. The left input and right input represents the left and right part of join operation. So depending on type of operation chosen like LEFT JOIN,INNER JOIN etc it takes correspondig input as the base input and
does join operation with the other input. Also it relies upon order of records in input which is why its essential that data should be sorted and also Issorted property must be tru for both the inputs.
The real significance of choice is for left join as it will take left input as base table and does the comparison with other input returning all records from base input irrespective of whether or not it found a match. In all other cases (INNER/FULL JOIN)
it gives similar output regardless of the which input you choose as left or right input.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Trackpad won't move curser mouse does. Left and right click working fine

Hello everyone,
I have a problem. Out of nowhere my trackpad won't move the curser anymore. Connecting a USB mouse does. Left and right click are still working fine. Any ideas of how to fix it?
Thanks
Dave

Hey there DaveDaMac,
It sounds like your built in track pad is not responding at all, but your USB mouse works without issue. I recommend the troubleshooting in this article for you named:
Intel-based Mac notebooks: Troubleshooting unresponsive trackpad issues
http://support.apple.com/kb/TS1248
Try disconnecting the MagSafe connector from the computer and check the trackpad function. If the trackpad becomes responsive again, improper grounding may be the issue.
If a two-prong AC plug is being used with the power adapter, try using the three-prong power cable that shipped with your computer and plug it into a grounded outlet.
If the issue persists, make sure the third prong is present and do not use an adapter to enable the three-prong adapter to be used in a two-prong outlet. Note that the ground in the three-prong outlet may not be connected. This is common in older homes or buildings with replaced outlets. In these situations, the three-prong power cable will not improve trackpad responsiveness.
If a grounded outlet is not available, rest your palm on the palm rest when using the trackpad. This should enable the trackpad to function properly.
Thank you for using Apple Support Communities.
All the very best,
Sterling

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels outputing different signals, to sound like the kit has been panned across the stereo field)?

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels putting out different signals, to sound like the kit has been panned across the stereo field)?

All the Drum Kits available for GarageBand are mixed in stereo.
Logic provides the same 18 Drum Kits also as "Producer Kits", which are multi-track outputs,. Each Drum Kit Piece (Kick, Snare, HH, etc) and also room mice and overheads are routed to individual channel strips.
Here is a screenshot of one Drum Kit in Logic Pro X with individual Channels Strips. Each Channel Strip can be loaded with individual effects (compressor) and adduced with individual sends, etc.
What that means is that all the Drummers are professionally recorded and sampled with individual mics. The Stereo Drums Kits are just "stereo mix-downs" for easier handling and less CPU demand. I explain all the details about the Drummer ecosystem in my graphically enhanced manual "GarageBand X - How it Works"
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Touchpad keeps freezing (left and right click work fine)

Hi, my touchpad keeps freezing randomly. I can still use the left and right click buttons and it eventually unfreezes after 10-40 seconds. Please tell me how to fix this. Thank you.
Here's my computer information:
HP Pavilion
Product number G4W72PA#AKL
Running on Windows 7 (not sure if 32- or 64-bit)

Hello @ericajq ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion Notebook and issues with the Touchpad on Windows 7 freezing. Here is a link to Touchpad troubleshooting.
The section marked TouchPad properties page on the left side has a restore defaults. Select that button if available.
I hope this helps with the TouchPad,
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Regarding left justified and right justified in sap script

Hi Experts,
I create sap script. in sap script i have 2 field in one row 1) amt discription and other is amount... amt discri is a left side and amount is a rigth side like:
amt discript   amt
blablabla      100
now what i want amt disc should be left side and and amt should be right side...
so how can i do this?? if that 2 field is different row so i have no problem but this field in one row.. so how can i make paragraph element or give tab in one row...
Give me suggetion.
Vishal

I am fine...Thanks.. How are you?
You can go to SE71...
Go to Paragarph ...select your paragraph say <b>P1</b>.. go to Tabs..
Now define as I have suggested...
If you want to use only one for the Amount that define like:
1 15 CM RIGHT..
In the text element write like this:
P1      Amt Desc,, AMT
RIGHT tab means, the value related to that field should end before the specified limit. Like in this case it should end at 15 CM.
Regards,
Naimesh Patel

LI2721s 1 inch border on left, top, and right sides

Hello,
I called tech support but they didn't even seem to know what I was talking about in regards to this monitor, someone will get back to me I was told.
I recently bought this on Amazon, and it looks great, the entire point of me upgrading my monitor was the entire "edgeless" monitor...... but I seem to have a 1.5 inch border (both bezzel, and black bars). Is this just a fact of the monitor, in which case, it should really be told somewhere in the advertising that this monitor has a 1 inch border. Orrrrr its a software issue, either or any help is appreciated.
v/r,
Z

Hello Bgriffin2,
As I told you guys in Twitter, IMO this is not a technical problem, this is an advertaising problem. The black border is not part of the LCD panel, its part of the transparent plastic that protects the lcd, but is painted, there are no pixels behind that black border.
Can you guys plug one of these monitors and check this by your self and confirm me and the rest of the customers that this is a mistake in the advertising ?. PLEASE TRY IT YOURSELF !
I'm copying below some review from Amazon.
"As many others posted, it is no where near edgeless. I've gone under my graphic's card settings and scaled it to 100% vertical and horizontal and still no luck. I looked at the screen under very good lighting and found that the black 2/5 inches from both the left and right edges are not pixels and is colored very well to blend in with the pixel screen."
"I'll weigh in with the "not edgeless" camp. It's actually not edgeless in two ways. 1) there's a 3/16" plastic frame around the entire monitor. It would be easy to look at the product photo and believe the glass goes up to the edge with only a band of plastic across the bottom."
"Secondly there's a 3/8" 5/16" band of dead real estate inside this plastic frame along the sides and top. This band is not apparent when the monitor is off, but when the monitor is on it just doesn't light up. It actually looked to me like i just needed to figure out how to scale the monitor properly, but i searched through all the options and no dice. Plus i verified that the actual live pixels measure 27" diagonally, so this is apparently the way it was intended to look."
"The screen has quite a large annoying bevel. Their description of "The Worlds first edgeless 27" IPS Display" is so massively misleading it's insane, "world first" lol, world's first what?"
"As many others posted, it is no where near edgeless. I've gone under my graphic's card settings and scaled it to 100% vertical and horizontal and still no luck. I looked at the screen under very good lighting and found that the black 2/5 inches from both the left and right edges are not pixels and is colored very well to blend in with the pixel screen."

Render left eye and right eye in cs6

Hi there,
I have a video that it is 3D Stereo in after effects and it is on anaglyth mode ( added a camera, second mouse button, camera, create stereo 3D rig ) and i have all set. But now how i render the left and right eye, with out the anaglyth look?
Cause now in the main comp where is the Stereo 3D Controls, both comps are off ( that is normal) but when i enter in the both comps i notice that they are not offsseting as they supose to do ( or how it doing on the main comp) I notice that the left and right comp have been offset to left and right but the image is not moving, and if i the layers as 3D i will have a gap, and if i try to compensate the by incrising the size of the comp, the gap is even bigger. so I dont know how to do it. Can anyone help me?
Thanks

If you are referring to these arrows in the CS5 interface:
They have been removed in CS6:
note:
If you're new to CS6 from CS5, just wait until you try to select
a transition vs. a cut point in the Timeline.

T7700 only left and right speakers working

I bought my speakers awhile ago, and I had no problems. Though I couldn't get my rear and side speakers to work, I found out by changing the speaker settings in the control panel. Now, my rear and side speakers don't work unless I reinstall the drivers. I checked the speakers setting in the Creative Volume Control and it says its 7.1, though my side and rear still dont work, it also says its 7.1 in the control panel. I am tired of reinstalling my drivers just to get my speakers to work properly. I have checked all wiring and it seems okay. When I run the speaker test, I hear sounds from all speakers. Diagnostics are all good but I can't seem to find the problem. I've also tried reinstalling my sound card but it seems to do nothing. Also when I reinstall my drivers and it shows the "restart your computer" prompt and I click "restart computer" it will freeze and I will have to revert to shutting it down improperly, sometimes it will freeze and sometimes it won't, this maybe the problem. PLEASE I REALLY NEED HELP. Thanks in advance.
-also I have a Sound Blaster Audigy 2 ZS Gamer and Windows XP

Immortaltechniq,
I think you may have a conflict with your card and the system. I would suggest that you cleansweep the card out, and then move the card to a different PCI slot. Once there reinstall the card making sure that your Antivirus is disabled during the process. Here are instructions on how to cleansweep:
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jeremy

No sound out of left speaker, and right speaker is extremely quiet

Hello,
I have an HP Pavilion DV5 Laptop. I'm having issues with my speakers, and am looking for help. My speaker on the left won't play anything, and the one on the right is annoyingly quiet. When I plug in headphones they work perfectly fine.

Hi Wumbo-Wizzard,
Welcome to the HP Forums! I understand that you are having a problem with the sound coming out when you connect the speakers. I will try my best to help you with this issue. To better guide you, could you please give me the model number of your notebook and the operating system that you are running on it. Here is a guide for How Do I Find My Model Number or Product Number?
In this document for Troubleshooting Sound Problems with External Speakers and Headsets in Windows 7 are steps that may resolve this issue.
I hope this information helps, please let me know.
Thank you,
I worked on behalf of HP.

Separating left channel and right channel

My composer needs a QT file that requires the following:
1. h.264 compression (for upload)
Audio: Left channel temp music / Right channel DIA/Vo/SFX
HOW DO I SEPARATE THE CHANNELS?

duplicate your sequence (you can always get back if you mess up)
in the dupe sequence, if your channels are now stereo, highlight the track,press option L (lower case) to make them mono. in your sequence settings define the audio outputs to be 2 mono. control click in the track near the on/off button and assign channels to either 1 or 2.

Left USB and Right USB work differently ?

Similar Messages

Maybe you are looking for