Legacy Application With Very Specific Client Versions

Hi There,
I am having a frustrating time with an application vendor who is refusing support of a legacy application unless precise Oracle client component prerequisites are met. Specifically they call for:
Oracle ODBC Driver 9.2.0.5.4
Oracle OleDB 9.2.0.4.0
Oracle OO4O 9.2.0.4.4
I can get OO4O by installing the regular Oracle 9.2.0.1.0 client that comes with the Oracle 9i install disk we have, I found an install package for Universal Installer that gets me the ODBC driver to 9.2.0.5.4. The last piece of the puzzle I need to get is the OleDB to 9.2.0.4.0.
So my question is: Is there a particular Oracle 9i Client package that contains this version of the Ole DB provider or a standalone package for it? If so where can I download it?
Thanks in advance...
Mike.

Hi,
You can get 9204 OraOLEDB on My Oracle Support as patch number 3262468. Select platform "Microsoft Windows (32-bit)" , not "Microsoft Windows (32 bit) client"
Hope it helps,
Greg

Similar Messages

  • Can we run oracle Forms 5 Application with 10G in Client/Server?

    Hi All,
    Can we run oracle Forms 5 Application with 10G in Client/Server
    Mode?
    Regards
    Gaurav

    In theory you can run it 2 tier - which means that you have the client (the machine the user is sitting at) being the same machine in which the forms application server is running. So yes. But specifically, we don't support a client server runtime anymore. 6i was the last version.
    With 10g you will be running through a browser.
    Regards
    grant

  • Client installation fails with error: The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client wil not be installed.

    Hello World,
    I have this remote server that used to be a sms 2003 secondary site server. We uninstalled the SMS role. And used the server as an SCCM remote distribution point. We also want to install an client agent on that server machine. But no mather how i try
    to install the client i always see the same error in ccmsetup.log:
    File download 100% complete (17847296 of 17847296 bytes). ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    Download complete. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    Successfully downloaded client files. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    Searching for available transform ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    Failed to find resource file 'client.mst' ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    No transform available for this locale. Installation will proceed with no transformation. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    Updated security on object C:\WINDOWS\system32\ccmsetup\. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    An MP exists on this machine. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000.  The client will not be installed. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    A Fallback Status Point has not been specified.  Message with STATEID='318' will not be sent. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    Deleted file C:\WINDOWS\system32\ccmsetup\WindowsServer2003-KB923845-x86-ENU.exe.download ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    I think the installer finds some remenance of the old SMS_MP. When looking i found some remains in IIS . I tried to remove the remains but still have the same error when installing the client. I uninstalled IIS completly. Can someone tell me where the client
    installer looks for the MP version? Would it help if i installed an SCCM MP on that server and the uninstalled it (Upgrade the MP)?

    Hello Kent, i ran the ccmclean.exe from the SMS2003 Toolkit. It informed me that my system was cleaned. I ran the sccm client setup manualy and found this in the ccmsetup.log
    MSI PROPERTIES are SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    IsFileMicrosoftTrusted Verified file 'C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi' is MS signed. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    Running installation package
      Package:     C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi
      Log:         C:\WINDOWS\system32\ccmsetup\client.msi.log
      Properties:  SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: INSTALL.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: SystemFolder.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: WindowsFolder.8AE6A59B_5597_4D75_9BFD_7F566BF56500.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: SystemFolder.98C5B086_7EB0_422A_B0A8_674010F525CD.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: SystemFolder.4C5E03E8_F8E5_47CB_8FF4_E46FE34D35A6.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: System64Folder.597B26B2_B5D6_40FF_90DA_B8E672626B1D.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: System64Folder.541D9CA5_CE53_4DCE_903A_9B9E5A6EF2C6.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: SmsCheckConfig.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:22: SMSValidateClientInstallStamp.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: LaunchConditions. Evaluating launch conditions ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: SmsDetectWindowsEmbeddedFBWF.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: SmsCheckNewRemoteTools.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: AppSearch. Searching for installed applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: CCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: RMCCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: ValidateProductID.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: CcmSetInstallDir.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: BCDSetX64Dir.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: CcmSetInstallDirFromCmdLine.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: CcmSetPrimaryFolder.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: FindRelatedProducts. Searching for related applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: SmsDetectInvalidOrderColocUpgrade.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: An older version of the SMS Management Point is installed. Please upgrade the Management Point before attempting to upgrade the client. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    Installation failed with error code 1603 ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
    Next retry in 120 minute(s)... ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
    Their must be something remaining that ccmclean can't find or can' access so i ran ccmclean /mp. This did some stuff and told me the system was clean again. I reran the client setup.
    Guess what
    It worked !
    Thanxs Kent

  • JRockit for applications with very large heaps

    I am using JRockit for an application that acts an in memory database storing a large amount of memory in RAM (50GB). Out of the box we got about a 25% performance increase as compared to the hotspot JVM (great work guys). Once the server starts up almost all of the objects will be stored in the old generation and a smaller number will be stored in the nursery. The operation that we are trying to optimize on needs to visit basically every object in RAM and we want to optimize for throughput (total time to run this operation not worrying about GC pauses). Currently we are using hugePages, -XXaggressive and -XX:+UseCallProfiling. We are giving the application 50GB of ram for both the max and min. I tried adjusting the TLA size to be larger which seemed to degrade performance. I also tried a few other GC schemes including singlepar which also had negative effects (currently using the default which optimizes for throughput).
    I used the JRMC to profile the operation and here were the results that I thought were interesting:
    liveset 30%
    heap fragmentation 2.5%
    GC Pause time average 600ms
    GC Pause time max 2.5 sec
    It had to do 4 young generation collects which were very fast and then 2 old generation collects which were each about 2.5s (the entire operation takes 45s)
    For the long old generation collects about 50% of the time was spent in mark and 50% in sweep. When you get down to the sub-level 2 1.3 seconds were spent in objects and 1.1 seconds in external compaction
    Heap usage: Although 50GB is committed it is fluctuating between 32GB and 20GB of heap usage. To give you an idea of what is stored in the heap about 50% of the heap is char[] and another 20% are int[] and long[].
    My question is are there any other flags that I could try that might help improve performance or is there anything I should be looking at closer in JRMC to help tune this application. Are there any specific tips for applications with large heaps? We can also assume that memory could be doubled or even tripled if that would improve performance but we noticed that larger heaps did not always improve performance.
    Thanks in advance for any help you can provide.

    Any suggestions for using JRockit with very large heaps?

  • Problems running Application with Web Service Client

    Im having some problems maybe related to some classpath details?
    I am running a Web Service another computer which works fine. I have also made an application using Sun ONE Studio 1 consisting of a Web Service Client etc. and GUI which uses the Client to get data from the Web Service. This works fine as long as I use Sun ONE Studio to execute the application, but now I have packaged the application to a .jar file and have encountered problems:
    When running the application from the .jar file I get the exception:
    java.lang.NoClassDefFoundError: com/sun/xml/rpc/client/BasicService
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:537)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
    at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
    at util.servicelocator.ServiceLocator.getServant(ServiceLocator.java:68)
    at lagerApp.eHandelLager.jRegisterBrukerListeActionPerformed(eHandelLager.java:784)
    at lagerApp.eHandelLager.access$400(eHandelLager.java:20)
    at lagerApp.eHandelLager$5.actionPerformed(eHandelLager.java:277)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
    at javax.swing.AbstractButton.doClick(AbstractButton.java:289)
    at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1113)
    at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:943)
    at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
    at java.awt.Component.processMouseEvent(Component.java:5100)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    I have searched the forum and found simular topics which are resolved by adding some lines to the classpath.
    How do I set the classpath? Do i have to use the classpath parameter from command window? How can I know which classpaths to include (libraries)..
    Any help would be nice.. : )

    Thank you for the reply..
    But im still geting the same error. I have tried to include all the libraries in JWSDP pack but still.. I have managed to narrow down the place where the error occures.. It actually happens when I try to get the WebService Client Servant which is located in the package LSC:
    ---> LSC.LWServiceGenClient.LWS_Impl service = new LSC.LWServiceGenClient.LWS_Impl();
    LSC.LWServiceGenClient.LWSServantInterface lagerServiceServant = LSC.LWServiceGenClient.LWSServantInterface_Stub)service.getLWSServantInterfacePort();
    return lagerServiceServant;
    Could something be wrong with the way I package the Jar? I'm using Sun One Studio and have tried including the 5 packages the application consists of; I have tried including just the files; moving the main class to <root>.. Still same problem..
    Or could there be some different fundemental thingy I have forgotten ??
    thanks
    Aqoi

  • 2012 R2 DirectAccess with very low client throughput

    I have a three-node Windows NLB Server 2012 R2 DirectAccess farm.  These three single purpose servers have good specs (8 cores, 32GB RAM, etc etc).  The problem that I am seeing is that the clients all have very low throughput on each session (between
    6 and 8 MBit "aka 1 MByte" per second).  This performance spec is linear since for each concurrent client that you add their throughput is also in that range.  Clients are all high-spec notebooks with Windows 8.1 Enterprise x64.  Performance
    on these clients is excellent except when transiting the DirectAccess server.  If the same client connects through AnyConnect VPN their throughput is excellent.  Additionally, when clients connect to the DA server plugged into the external traffic
    switch (aka same network as the DA external interface) the performance is identical so this isn't a WAN performance issue.  The utilization on all devices (DA servers, DA clients, network hardware) is very low so it does not appear to be a resource problem. 
    I confirmed that NULL CIPHER is used on clients so the traffic isn't being double encrypted.  This NLB started life 2 years ago as a Windows Server 2012 environment on different hardware and I've had the exact same issue.  It works "ok"
    but not the throughput that the capacity planning documentation indicates.
    Any ideas?
    Thanks,
    Mark Ringo

    Hi Mark,
    Which transition technologies does the client use to connect the DirectAccess Server?
    Using IP-HTTPS for DirectAccess connectivity has higher overhead and lower performance than Teredo. If the DirectAccess client is using IP-HTTPS instead of Teredo, the DirectAccess client will have a lower performance connection.
    When examining performance issues, one of the first places to look is the display of the
    ipconfig command on the DirectAccess server, which indicates the type of encapsulation based on the interface that has a global IPv6 address assigned.
    For detailed information, please refer to the link below,
    DirectAccess Client Connection is Slow
    http://technet.microsoft.com/en-us/library/ee844161(v=WS.10).aspx
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Run Fiori/UI5 apps with a specific UI5 version ?

    Hi,
    on our ABAP system UI5 version 1.18 and 1.20 are deployed. I just configured the Fiori Launchpad and started the app, by default UI5 version 1.20 is used.
    Is there a way how I can enforce to use version 1.18 for certain apps ?
    Best regards,
    Stefan

    Hi Stefan,
    The UI5 library in case of Fiori is loaded by the Fiori Launchpad and reused by the applications. So, I don't think it will be possible for certain apps to use 1.20 and certain to use 1.18.
    I did not really understand why you would like to use 1.18 version instead of 1.20. As a general recommendation , its always better to use the latest version of UI5 library.
    Best Regards,
    Nitish

  • My Mac OS 10.4.11 does not support Firefox 8.0 and I accidentally replaced my old Firefox folder in Applications with the 8.0 version. HELP!!! What do I do now?

    So now I don't have ANY Firefox at all on my computer. I need to download an older version of Firefox, I guess. Where can I get one or can I find my old one somewhere on my computer?

    https://support.mozilla.com/en-US/questions/893696
    thank you

  • How can I make links in another application (say thunderbird) open with a specific Firefox profile

    Having several different Firefox profiles, clicking a link in another application (for instance,a link in Thunderbird,or in a email message,generally speaking) brings up the profile manager:is there a way to bypass it and force all links to open with a specific Firefox version\profile?

    A way to do that is to edit the registry and add the -p "profile" switch to those protocol links. There is however no guarantee that such a change stays after an update and Firefox may complain.<br />
    Another way is not to use the profile manager, but select the profile for the default browser once in the PM to set the profile for the default browser, so that profile is marked as Default=1 in profiles.ini. Then place a checkmark in the box to never ask and use a desktop shortcut to start each Firefox version with its own profile, so you do not have to use the PM as that would set another profile with Default=1
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

  • Calling a .py script inside a .VI, using anaconda's Libraries or specific python version (SystemExec.vi(?), MAC OSX)

    Hi,
    I'm new to both mac and LabView, so it may well be something obvious I'm missing.
    I'm trying to use System Exec (http://zone.ni.com/reference/en-XX/help/371361L-01/glang/system_exec/ with LabVIEW 2014 on Mac OS X Mavericks) to call a python script to do some image processing after taking some data and saving images via LabView.
    My problem is that I cannot figure out how to point it to the correct version/install of python to use, as it seems to use the pre-installed 2.7.5 apple version no matter whether that's set to be my default or not (and hence, it can't see my SciPy, PIL etc. packages that come with my Anaconda install).
    It doesn't seem to matter whether I have certain packages installed for 2.7 accessable via the terminal, the LabView System Exec command line can't seem to find them either way and throws up an error if a script is called that imports them.
    I've tried changing the working directory to the relevant anaconda/bin folder, I've also tried
    cd /Applications/anaconda/bin; python <file.py> 
    as the CL input to system exec, but it's not wanting to use anything other than the apple install. I've tried Anaconda installs with both python 2.7 and 3.4, so it doesn't seem to be down to the 3.* compatibility issues alone.
    Printing the python version to a string indicator box in LV via python script gives the following:
    2.7.5 (default, Mar 9 2014, 22:15:05)
    [GCC 4.2.1 Compatible Apple LLVM 5.0 (clang-500.0.68)]
    Whereas via the terminal, the default version is the anaconda install I'd like to use, currently
    Python 3.4.1 |Anaconda 2.1.0 (x86_64)| (default, Sep 10 2014, 17:24:09)
    [GCC 4.2.1 (Apple Inc. build 5577)] on darwin
    I can do which python3.4 on the sys exec CL input to get the correct /anaconda/bin location, but if I try  python3.4 <file.py>, I just get a Seg fault.
    I've found examples for System Exec use and instructions for calling python scripts with specific versions, but neither works with Mac (frustratingly).
    I've also tried editing the Path Environment Variable, and tried getting rid of the python 2.7 install entirely, but none of these work either (the latter just causing errors all over the shop).
    So, in summary
    I'd just like to know how to specify the python version LabView uses and to have use of the corresponding python libraries.
    Either python version (2 or 3) will do, I'd just like to be able to use my libraries which came with Anaconda which I'll be writing my scripts with (which I installed as the correct packages are only compatible with a specific python version on Mac, which is not the specific version that Xcode was compatible with, argh).
    All packages work normally when using the Anaconda version with the terminal or with Spyder.
    Is there a function I can use other than System Exec? What am I missing?
    Please help.

    janedoe777 wrote:
    Accidental. Also, that's not terribly helpful.
    What exactly does that mean?
    I'm not debating whether it was accidental or intentional.  It certainly isn't helpful to post the same message twice.
    It is helpful to point out this message is a duplicate so people don't waste their time answering this one if you are already being helped in the other one.

  • When attempting to set up Mac OS to open a specific app (version), and selecting 'Change All' on Get Info, it reverts to most latest app version of the same.  Any clues?

    When attempting to set up Mac OS to open files with a specific app (version), through 'Change All' on Get Info, it reverts to most latest version of the same app.  Any reason why it does not allow my other version of same app to be the default one?

    I have Acrobat Pro 10.1.13 and Adobe Reader 10.1.13.
    If I use the Finder to get all PDFS to open with Reader instead of Pro, they do.  And vice versa, using the Change All.

  • TOAD 8.5 with Oracle Instant Client 10: ORA-03134

    Hi,
    I have tried TOAD 8.5.0.50 and also TOra 1.3.16 to connect to the database via Oracle Instant Client 10, but I am restricted with this error message:
    "ORA-03134: Connections to this server version are no longer supported."
    Does anyone have any idea what is wrong? Earlier version of TOAD works alright. We are using Oracle 8i. Are there any compatibility issues between Oracle database version with Oracle Instant Client version?
    Thanks.

    Just want to share with everyone. This is a reply that I got from another forum:
    this is a oracle bug!
    connections with the 10g client are supported to 8.1.7.0 and above.
    the bug in the client causes this error.
    you are only able to connect to 8.1.7.4 and above.
    i made a service request but oracle is not able to patch the
    instant client.
    you have to use 10.1.0.3 client or above
    Regards.

  • Antimalware Client Version

    We have several clients with the antimalware client version 4.5.216.0.  Running Windows update manually doesn't list an update for this.  I've tried the following:
    1) Wiping out the softwaredistribution folder
    2) Re-installing SCEP
    Also, quick scans on these systems seem to hang when they're nearly complete.  On the current quick scan the time elapsed paused at 4:33.  If I click cancel, it goes back to the home screen, and if I click scan again, it just goes back to the paused
    progress.
    Any ideas?

    When you run Windows update manually, is it connecting to an internal update server or to the Internet? Check WindowsUpdate.log
    You should be picking up KB3041687 which is version 4.7.209.0 of the Antimalware client.
    If it isn't showing as available, you probably need to check the products being synced with WSUS/ConfigMgr SUP and make sure that "Forefront Endpoint Protection 2010" is included, and under classifications, critical updates are being synced as
    well as definition updates.
    Or maybe that update is being synced, but you don't have it added to a software update group being deployed to those systems.
    Haven't seen the scan behavior you mentioned, but perhaps updating the client will fix it.

  • Hello I'm with you old client I've got some observations When you request from your Website demand is refused I would like to inquire why the request is rejected Please refer my account and make sure rejected previous applications Thank you very much

    Hello
    I'm with you old client I've got some observations
    When you request from your Website demand is refused I would like to inquire why the request is rejected
    Please refer my account and make sure rejected previous applications
    Thank you very much

    Check the Ethernet connection to the AirPort Express. Make sure that the Ethernet connection from the Comcast modem is connected to the WAN port on the back of the AirPort Express. The WAN port is the one with the circle of dots shown over the port.
    It sounds like you are connected to the Ethernet LAN port.

  • RH Client Version & Other Applications

    How do you have your client version of RH set up if you also use
    several other applications?
    I am preparing to switch over to a different infrastructure
    because another company bought my company and have to explain the
    cost/reason whether we should look into one supa dupa computer or
    keep the separate computer setup I have now since it works so well
    that way.
    Not Broken Don't Fix It Theory.
    My RH and I have been together going on 4 years now . . .
    Year 1 everything was on one desktop and I used Source
    Control (cough/cough).
    Year #2 RH Client Version got it's own home (separate
    computer) and RH Source Control got disconnected.
    Year 3 almost 4 we have been very happy together!
    My set up is: 1 Monitor
    + Computer 1 just for RH
    + Computer 2 everything else (Lotus Notes, Outlook,
    Captivate, SnagIT, Microsoft, Photoshop, 2-3 company-specific
    applications, etc)
    Thanks in advance for your time!
    Cindi

    Hello Cindi -
    Getting a workstation set up "just right" is not an easy task
    and changing for the sake of change is not a good idea. And we all
    have heard or experienced the nightmare of RH/version control over
    a network - avoid it if you can.
    As to what I do - I have three workstations:
    > Office Workstation with normal corporate image of Office
    2000 or Office 2003 (including Outhouse, err, Outlook), MS Project,
    Rational Suite and a ZIP program.
    I have added to it : RH5, Photoshop, the GIMP, Open Office,
    several utilites for screen capture, PDF (Adobe Acrobat 4 and
    non-Adobe), search/replace utility, html/xml editing, FTP transfer,
    numerous browsers/versions, etc.
    > Home Office has most of the Office Workstation software
    plus a LOT more for personal use.
    > Test Bed is bare-bones for testing beta releases, has no
    Internet access and only what the beta software under test requires
    as a minimum.
    The Office Workstation and the Home Office workstation get
    backed up on a fairly regular bases. Note to your Sys Admin: when
    creating a backup image of a RoboHelp workstation you MUST set the
    software switch to back up the master boot record as Adobe writes
    your registration there (most imaging software does NOT back up the
    MBR by default - requires setting a switch). Don't let your Admin
    insist that Microsoft doesn't allow that as it constitutes a "root
    kit" - my Admin didn't believe me until it was too late.
    Always back up the workstation BEFORE adding, up grading or
    patching software - especially before installing Microsoft patches
    (be wary of "patch Tuesday" - the second Tuesday of every month,
    just before "reboot Wednesday").
    Never install beta software on a production workstation.
    The Test Bed gets wiped frequently and is never used for
    company/customer projects.
    Both the Home Office and Test Bed dual boot between Linux and
    Windows. Only the Linux systems are allowed Internet access with
    the exception of Test Bed - Windows access is allowed only to
    register the beta software (Adobe doesn't have over the phone
    registration for beta testing) - after that it gets unplugged.
    Regards,
    GEWB

Maybe you are looking for