Legacy component was gone after updated the sound library
Hi there,
I found an update sound library option in my GB 10.0.2. After the updates, my 'Legacy' component was removed. Could anyone help me how I can get it back? Thanks.
Catherine
Hi
I have never heard that the antivirus software has a bad influence on the sound, speakers or the sound driver.
What you can do is to check the device manager if there are some yellow exclamation marks.
Try also to reinstall the sound driver. Check the Toshiba driver page.
Similar Messages
-
Ipad2- all files was gone after updated. please help
after i click "updated" of my ipad2, all my files was gone, all viedo ..photos was disappeared,
how should i do??? is it possible to find back my files???Restore from iTunes or iCloud backup if you have one.
-
HT4009 My In App Purchase is gone after updating the app!
So I Update my game App Fish with Attitude and Fashion Design World, after the update finished I went back into the games
But my progress was lost and do we're my in app purchases. I reported the problem to the app creator and all in app purchases are handled by itunes.
So I then went into my account to try and report it but the teport a problem link sends me to the homepage. At this point I'm getting frustrated because I can't
To find a proper answer or link that can help me and the other thing is that I don't want to lose my game progress and purchases. What do I Do?You will have to contact iTunes Support to get help:
https://expresslane.apple.com/Issues.action
Select the options which best apply to your issue. You will have a chance to include a written description before you submit the request. iTunes Support will get back to you via email, usually within 24 hours.
Good Luck!
Cheers,
GB -
my iphone 4 is stuck in restore after updating the lasted version. It was working fine before.How do I get it working again?
Hello, fschris.
Thank you for visiting Apple Support Communities.
When experiencing issues updating or restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H. -
I had deleted my Apps Icon from the phone as I was trying to update the new version iOS4.3.
However, after deleteing the Icon, I am not able to install the Apps Messenger again because I am not able to use the IOS.4.3 diagnostic password sent via email.
Installation was rejected because I need the iOS.4.3
Thanks for your help
MichaelThat situation went from inconvenient to complicated quickly. Wait for any pending orders to drop off, wait for things to clear up, wait till your upgrade comes up and then upgrade when your contract is fulfilled. I would have suggested a replacement phone, I know, with only a month left why couldn't you just upgrade early, but these situations where people try to upgrade early always end horribly and once a phone order starts, it almost cannot finish until something winds up shipped received and returned. Sorry this happened the way it did. Definitely not efficient.
-
My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?
Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD -
No keypad sound after update the software into 10.3.1.1565
Hi guys..please help me. I'm using Z10, after update the software into 10.3.1.1565, there is no sound of the keypad, eventhough i have made the volume of the keypad sound to the maximum.
Is anyone has any idea or suggestion about it? Thank you.Lots of users are complaining about issues with Contacts from OS 10.3.1 udpdate (Q10 v5).
I've tried everything under the sun (reinstalled OS multiple times, completely wiped my device, etc) and the problems still persist.
I've noticed that if I repeatedly disable and re-enable Contact syncing via Settings (and then waiting an hour or two), the Contacts will eventually appear after about 5-10 attempts, and my text messages and phone calls will show names again.
BUT, as soon as my Q10 soft resets for any reason (if battery dies, for example), all of my main Contacts completely disappear. Then I have to repeat the steps above every time.
There are a few other things I've noticed:
1) If I click "Edit Contact Folder Settings" button in Account Settings, it shows Contacts, LinkedIn AND "LinkedIn 2". I don't even have LinkedIn installed!
2) If I turn OFF the toggle switch to "Sync All Contact Folders" then click save, it doesn't actually save my settings (usually if something saves successfully, the devices seems to think for a few seconds, which doesn't happen). As soon as I go back to manually edit the Contact folders, the settings are reverted back to All Contacts.
So frustrating.. -
my i pad turn off while i was trying to update the software and i am unable to rest the setup again ?
it is not recognize by the computerTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
[SOLVED] vi (vim) no longer works properly after updating the system
After updating the system with pacman -Syu vi stopped working. All syntax colors are gone, and everything is grey. When I press i to enter "insert" mode, editing is not visible. Changes are obscure and you can't tell what you are modifying. Quitting with :q will still prompt you to use :q! to abort changes, even if no changes were visibly made.
When scrolling to the beginning or end of a file, the screen flashes with grey glitch like areas. What happened to my vi!?!?!?!?!?
This all happened while following the beginner's guide to install arch linux. I realized this when trying to arbitrarily read a test file I made directly after updating.
The problems continued to be visible when installing and setting up sudo (those steps are the next steps that require vi)... I think the sudo installation worked... but my vi is horribly glitchy
Any ideas?
Last edited by trusktr (2010-02-19 07:19:55)Setting EDITOR does not help in every case. For instance, visudo is by default hard linked to vi. (You can change this, I know. )
But in fact, vi is only a symlink to ex. So I simply renamed this link and put another symlink to vim (vim-big in my case since I in fact do use the gvim package).
/usr/bin/vi -> vim-big
/usr/bin/vi-simple -> ex
The drawback is that I have to set those links on every vi-update. (But I sure will remember...)
Last edited by bernarcher (2010-02-19 00:58:57) -
AFTER UPDATING THE IOS 8 IN MY IPHONE THE PHONE MEMORY REDUCED TO 5.5 GB WHICH IS VERY LOW COMPARED TO 8GB. IWANT DEGRADE IT TO IOS 7.1.2
You must have upgraded the device directly through WIFi, restore your device via ITUNES and thats gonna work, it will reduce the space occupied by the new software installation
-
I had original iPhoto app from 2007 or 2008, but in the last year it stopped working seemingly out of nowhere. Now I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater. My pictures are lost in the abyss.
I'm using OS Extended 10.9.5. I don't know what the original version of iPhoto was.I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater
Have you run the iPhoto Library Upgrader? You need to direct it to the location of your old iPhoto Library by clicking the "Choose Library" button in the lower right corner of the panel you are seeing when the upgrade starts. -
After exporting, the sound in some areas goes crazy
So like the title explains, after exporting the sound in a couple of areas goes crazy, like static. I tried twice, still the same result.
NB: I exported in H.264 in Apple devices 1080p, MBP retina 15 inch 2.6 GHz i7, FCPX 10.0.8
Thank youWhen in FCPX, the sound works fine (in mono) but when exported in H.264, the sound becomes static.
I recently had a similar problem, with Final Cut playing the audio fine but in the exported file the sound was static. The source of the problerm was that the audio was just slightly less than 48 kHz. After using Compressor to transcode the media with audio at 48 kHz and importing the transcoded file into Fianl Cut, the exported audio was fine.
https://discussions.apple.com/message/25559825#25559825 -
I just purchased and downloaded Logic 9. I had Logic 8 previously installed. What the **** happened to my Logic 8. It's gone along with the sounds and my my G4 mastering Folder. And... where are all these sounds stored on my computer I can't find them?...
Very many thanks Niel. My problem solved in less than five minutes. I've never had to use that command before. I found the folder and copied it - but I'm still no clearer as to where it was!
Thanks again -
I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank youIf you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
HT5706 photos on screen saver gone after update of apple tv
photos on screen saver gone after update of apple tv
Welcome to the Discussion Forums
Why are you looking in a shared library, is itunes set up as a secondary library.
See This
If you are set up as a primary library you need to look in my tv shows.
When you say you have reinstalled everything, does that include itunes (if so how did you do that), does it include rebuilding your itunes library.
Maybe you are looking for
-
How do I find the cookies I want to keep
Recently I asked for some help but I think my request has got lost. I had beenadvised to save the cookies I want to keep but this is beyond me. My question is how do I find the cookie I want to keep? It is a cookie for an ebook and I have no idea wha
-
Hello, I was trying to purchase an item in a game call 帝王三国! but it does worked first few times, but it isnt working anymore ! It tells me to contact apple store to purchase the item.
-
How do I create a Group email list from my contacts??
I can't figure out how to create a Group email list from my contacts on my iPhone??
-
Deleting duplicates in the verizon cloud contacts
I need to send contacts to new razr replacement due to damage. How do I eliminate the duplicates in the cloud?
-
Value set problem in oracle apps
Hi I have got one problem with value set There are two parameters in report 1. Collector Name -> value set table type 2. Customer name -> value set table type I want , when I give collector name the customer name parameter should be disabled automati