Legacy Print Services (4.2.x)

Hello,
We upgraded last night to the 4.2.x platform and one of the Wave274 boxes had an issue. Its producing a minor on the dashboard (yellow) related to Legacy print services. The error is shown below:
Minor:Legacy Print Services are deprecated in 4.2.x
Accompanying these are thousands of continious errors shown below (1 each):
Wed Jun 30 23:59:16 EDT 2010   WAE   AITEBOSTONWAAS   Server warning Error while adding or deleting print drivers.   Cannot process driver due to error preparing the FTP call
Wed Jun 30 23:57:16 EDT 2010   WAE   AITEBOSTONWAAS   Server warning Error while adding or deleting print drivers.   Edge NetBios name is not defined
Wed Jun 30 23:56:37 EDT 2010   WAE   AITEBOSTONWAAS   Server warning Error in get list of installed print drivers.   NetBios name is not defined
-I've checked all of the Legacy Print Services sections and they reflect:
Print Services feature is not enabled on this Device
-Windows Print Accelerator is enabled by inherited Policy under acceleration.
How can I clear this error and make sure these logs do not indicate an issue?

Check the CLI configuration of the device for the command:
print-services enable
If it's there, disabling it with no print-services enable.
Regards,
Zach

Similar Messages

Use two different printer services in one web template?

Hi!
Is it possible to use two different help services for printing in the same web template (for the same table item)?
Print1:
<param name="HELP_SERVICE" value="HELP_SERVICE_PRINT"/>
<param name="HELP_SERVICE_CLASS" value="ZCL_RSR_XLS_HELP_WINDOW_PRINT"/>
Print 2:
<param name="HELP_SERVICE" value="ZPRINTING"/>
<param name="HELP_SERVICE_CLASS" value="ZBW_PRINT_HELP_SERVICE"/>
I was thinking that you maybe could change the param name values for the "Help_service" and the "help_service_class" at runtime using the properties for the table item, so that you could choose which one to use, but I havne't been able to do that so far.
Does anyone have an idea?

This is not a problem. Just put the print service for the print to excel on an object other than the table web item. As long as these print services exist on any web item, you should be able to invoke them. I've tested this with putting the "Print with Excel" service on the Navigation Block Web Item and the other print service on the table web item. Hope that helps!
Prakash

I have created a family recipe book in iBooks - can I print it using iPhoto's print service?

I have created a family recipe book in iBooks - can I print it using iPhoto's print service? I don't want to print it on our home printer - I want to print multiple copies for family members through the Apple iPhoto book printing service. Can anyone help me please?

There is no Apple print service for iBooks, and iPhoto can also only print photo books created in iPhoto.
Print your iBook to pdf. Then you have several option:
Save the pdf to a thumbsdrive/stick and take it to the nearest print shop close to your home.
Search online for "self publishing" services available in your country.
Recreate your book as an iPhoto Book. This will be a lot of work, since iPhoto's templates are more suitable for Picture books than books with lots of formatted text. To speed things up, you could use "Preview" to export the pages of your book as jpegs (high quality, at least 300 dpi) and add themas full-page photos to a new PhotoBook. This can be sent to apple for printing.
But the first two options would be much less trouble and probably be less expensive.
-- Léonie

Print Service -- Queue Log location

Hi,
I'm sure this is just a minor thing I should know, but I'm trying to find the individual Queue logs. In reading the OS X Server -Print Server Admin document, it mentions:
A print queue log records information such as the name of users who submitted
jobs, the size of each job, and errors associated with a job.
It then tells me how to view a Print Service log which only contains info on the Print service itself, but not how to view the individual Queue logs. I've dug around for the past 2 hours but cannot locate it. I'd really like to have a log of that info-- any help would be much appreciated.

I appears the nature of this question has changed a bit. I can't the queue logs because it appears my jobs are not being processed by the server.
Here's the deal. I have a 10.6 lab set up pointing to an 10.6 server. All of the lab computers are set up to printing, using the printers provided by my MCX prefs. When you print a document from the workstation, it processes and prints as expected-- however at no point does the server have this job appear in the queue.
I just want to see if there is something I've missed. I set up the server with the printers I want in my queue. I then added said printers to the list via workgroup manager. The workstations see AND print to only the printers supplied in workgroup manager. But it appears that jobs do not actually go through the queue-- it's almost as though they bypass the server and print directly to the printer. Is there a step I left out?

In Printer Services box, i get the message "unable to perform the operation"

HP Officejet H470wbt. Using via bluetooth. i have recently installed a new ink service module and a black toner cartridge. Now I get the following message when trying to view ink levels in the printer services area--"unable to perform the operation"

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"<br />
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"<br />
<br />
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

In printer services error message says "unable to perform this operation"

when I try to check my ink levels in the printer services area, an error message comes up "unable to perform this operation"
I have deleted and reinstalled my printer. I have downloaded the lastest driver--all to no avail

Please read this post then provide some details. What printer model? What operating system?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Adobe Print Services in Java Instance on iSeries

Comment by moderator: An english overview of this thread is given in an answer to this posting.
Sehr geehrter Herr Hoelters,
wir möchten gerne GTS on System i fahren. Für fast alle Module aus GTS
braucht man die JAVA Instanz. Das soweit ist wohl kein Problem.
Für die Adobe Printing Services brauchen wir die Java Instanz auch.
Nun gibt es wie unten aus dem Buch zitiert non supported Platforms.
Im Hinweis Hinweis 925741 wird eine Lösung mit einem zusätzlichen
Applikationsserver empfohlen.
Dadurch stellt sich raus, das wir doch einen zusätzlichen Windows
Server für diese ADS benötigen.
In der PAM kann man folgende Informationen finden:
Freigaben Adobe Document Services Datenbank-Plattformen DB2/400...
freigeg.
Datenbankversion Betriebssystemversion Datum Status
DB2/400 V5R3 WINDOWS SERVER 2003/IA32 32BIT 05.12.2005 Freigegeben
DB2/400 V5R4 WINDOWS SERVER 2003/IA32 32BIT 14.02.2006 Freigegeben
Bedeutet das jetzt das ich die ADS nicht ohne Windows Server nutzen
kann ?
mit freundlichen Grüßen
Carsten Schulz
Erstens:
Book: Global Trade Services Using SAP® GTS 7.0
Page 13
Depending on our process, it can be necessary to set up the following
additional instances:
SAP NetWeaver Java Stack
All print forms in SAP GTS are available in Adobe print technology. If
you want to use printing functions the Adobe Document Server (ADS) is
required that is icluded in the delivery of SAP NetWeaver Java Stack.
Printing documents and forms can be necessary in the following areas:
- SAP Customs Management
- SAP Risk Management Preference Processing
- SAP Risk Management Letter of Credit
Zweitens:
Book: SAP NetWeaver 2004s SR1 Java: IBM eServer iSeries
2.4 Running Adobe Document Services on Non-Supported Platforms
Adobe document services (ADS) are currently not supported to run
natively on all platforms supported by
SAP systems based on SAP NetWeaver, in particular on 64-bit platforms.
Procedure
To use ADS in SAP landscapes on non-supported platforms, install an
additional standalone AS Java on a
platform supported by ADS.
For more information, see SAP Note 925741.
Drittens:
Hinweis 925741 - Adobe Doc. Services (ADS) auf nicht unterstützt.
Plattformen
Hinweis zu IBM iSeries
Zusätzlich zu der beschriebenen Lösung können Sie einen zusätzlichen
Microsoft-Windows-Applikationsserver für die ADS im Java-Stack
einsetzen, wenn Ihre Umgebung auf einem IBM-iSeries-Server installiert
ist.
Message was edited by:
Carsten Schulz
Message was edited by:
Carsten Schulz

Hello.
This question and its answer might be interesting for the non german speaking members of this community, too. So I made a short translation of the discussion. Not in every detail but it should be sufficient to get the idea. If you have any further questions don't hesitate to ask here. For future discussions I would like to encourage all of you to use english as the forum language. The members of this community are distributed all over the world and using english is the only way to get feedback from most of them.
Now to the question:
Mr Schulz is interested in using GTS on a system i. To use the Adobe Printing Services support in GTS it is necessary to set up a Adobe Document Server (ADS). At the moment ADS does not run natively on system i. The PAM states that ADS runs on DB2/400 using a windows server. SAP Note 925741 suggests to run an additional application server. The question is now if there is no way to run a ADS on a system i without a windows server.
The answer given by Mr Hölters can be outlined as follows:
In fact ADS is not supported under i5/OS. To allow usage of ADS without introducing a second database platform to your system landscape there is a solution given in SAP Note 925741. Instead of having a second NetWeaver installation on a different platform you can add an additional dialog instance to your application server running on system i. If this dialog instance is running under Windows you can install ADS there and don't have to use a second database platform.
With kind regards,
Jan Stallkamp

Should I install Print Services as a role for a single server env no domain

I have a OAS application using converted UNIVERSE code to work with withSQL server. The application works fine and local users and groups will do the job. I have been tasked with replacing UNIX based printing to Windows based printing. Don't need LDP services
either. Does it make sense to install print services for about 30-40 printers or just set them up local. There will be about 10 different forms and i will have to be able to re-direct jobs, pause jobs, re-queue jobs, and disable\enable the printers.
I don't know that version 3 or 4 printer drivers matter because the same printer driver will be used for a majority of print jobs. As a matter of fact there are 5 or 6 different drivers needed. This is setting on a 100 MB backbone with GB access to the server.

Hi,
Print Services enables you to share printers on a network and centralize print server and network printer management tasks by using the Print Management snap-in.
Print Management helps you monitor print queues and receive notifications when print queues stop processing print jobs. It also enables you to migrate print servers and deploy printer connections by using Group Policy.
Print Services Role
http://technet.microsoft.com/library/cc732378(WS.10).aspx
I’m not quite clear about your current provisioning, as referred in the title, for single server without domain. I think this role is not necessary for you.
Hope this helps.

Low Resolution when uploading to online printing service

When I upload photos from iPhoto to an online printing service (Walmart, Costco, Shutterfly) photos show up as low resolution. When I take the picture I use the higest resolution. Are there any suggestions on how to rectify this situation? I have uploaded and printed before with no problem. Do I have to use the memory stick directly to the site or change settings?
My camera is a Sony DSC-W55.
iMac Mac OS X (10.4.9)

lulamom
Welcome to the Apple Discussions.
How are you going about uploading?
Are you digging the files out of the DATA folder in the iPhoto Library Folder? If so, you're using the thumbnails that iPhoto uses for display purposes.
There are three ways (at least) to get files from the iPhoto Window.
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
I suggest you use the File -> Export option and export the pics to the desktop. There iPhoto will make a copy. Upload that, and when the upload is finished you can trash the copy on the desktop - your original is safe in iPhoto.
Regards
TD

What 3rd party companies are there that offer a photo printing service for ipad2 users? I suppose I am looking for a similar service to iPhoto on the MacBook pro but so far I've had no joy. I'm uk based.

What 3rd party companies are there that offer a photo printing service for ipad2 users? I suppose I am looking for a similar service to iPhoto on the MacBook pro but so far I've had no joy. I'm uk based.

Are these the kind of thing you're looking for:
http://itunes.apple.com/us/app/lifepics/id323705153?mt=8
http://itunes.apple.com/us/app/walgreens-for-ipad/id430444027?mt=8
Matt

I can't go further "waiting for Printer Services" on Mac OS X 10.3 can U?

Evening, I'm a new user, and ocassionally use my iBook.I turned it on but it takes ONE HOUR to get to the prompt Waiting for Printing Services. I was advised to re boot but no success, I guess this all happened after i tried to update latest version.
I appreciate if you can help!!!

I am working on a friend's Ibook, I am a PC IT, and know very little about Mac's so please bare with me in helping (1st grade Mac user).
In my Mac fixing journey, I have used:
1. Repair Disk = no repairs found to fix
2. Repair Permissions = stalls and gives a prompt disconnected quit and restart, did that same prompt
3. Booted in safe mode, gets to the same point "waiting for Printing Services" and then fades out and shuts itself down after a long period.
4. I have tried to holding down opt, apple, p & r keys to reset "pram" = no go.
5. Removed the power source and batter to reset computer.
6. Booted computer connected into the printer and not connected to the computer. Same freeze place.
After all this being done,and reading alot in here, I purchased disk warrior, it corrected a few errors, rebuilt and rebooted...only to come back to "waiting for Printing Services" and then freeze.
Anyone have anything else they can help me with, that might get me passed this problem??
Thanks in Advance for any advice!!
Sav
Ibook G4 Mac OS X (10.0.x)

How does one print to enterprise Windows print services in Yosemite? CUPS 2.0 problem?

One of my co-workers upgraded to Yosemite yesterday and it broke his ability to print to our corporate printing services (which are built around a Windows print server). Obviously, the printer discovery in the System Preferences can't find the Windows print server - that's never worked. However, we had previously been able to add a printer through the CUPS web front-end by adding a Windows printer and specifying an SMB URL in the format:
smb://DOMAIN;USER:[email protected]/QUEUE-NAME
... which worked like a charm in Mavericks. However, Yosemite has upgraded to CUPS 2.0.0 and this no longer seems to work. Print jobs enter the CUPS queue, but authentication fails and they are not accepted by the remote server.
I've consulted the CUPS 2.0.0 documentation, and there's not really anything helpful there. In fact, there's no mention of SMB / Windows printing at all in the 2.0.0 documentation. Unfortunately our campus print services does not support IPP, LP, LPR, or JetDirect as options -- just Windows printing.
Does anyone have a suggestion?

Just finished testing 10.10 printing via a Windows 2008 R2 print share. I also found that when trying to add the printer using CUPS I would get an authentication error. But if I added the printer using the Windows section of the Add printer pane, then I was able to print fine.
So with you mentioning that using the Windows section of the Add printer window has never worked (which is interesting because it's always worked for me) I want to suggest another approach to adding the printer, still using the Add printer window. With this window open you can right-click on the toolbar and select Customize Toolbar. You can then drag the Advanced icon to the toolbar. Then when you select this, you can set the Type menu to "Windows via spoolss" and then enter the URL as smb://servername/sharename. Select the supporting driver and click Add to complete.
Then when you select to print for the first time using this printer you will be prompted to authenticate. Enter the account details, set the save to Keychain option and OK to send the print job.
This worked fine for me and creates the same queue as using the Windows add printer setting. Curious to hear if this gets your co-worker printing again.

Adding Printer as a scanner in print service role (Distributed scan server), would it be possible in windows server 2008 r2 !!

Hello All
I have a sharp printer that support scanniing as well and my question is :
I want to getting use from manage scanner service role that is belonging to the print service role in windows server 2008 , which has the feature of passing the scanned document to users shared folders which are exist in the same server.
but when i try to add my printer as a scanner it did not accept .. so i cant proceed with my objective, which is allowing users to pass their scanned docs to their shared folder
Any idea ?

Can i scan to network shared folder without adding the used credentials, i am looking for this distributed scan features for this issue.
now each time new user will come i will create for him a shared folder with his username and password then i will go to the printer web base page and add this shared folder to the address book, but i need the user to come to add his password. how i can tell
the printer to authenticate him and directt his scan to his shared folder without asking him to enter his password to be able to create an address book for him ?? any help
Thanks in advance !

Printers showing up after Printer Service has been stop or printers deleted

I started setting up the Print service on one of our Mac OS X.5 Servers.
Very simple to do.
At the printer configure and disable all sharing options mDNS, AppleTalk or EtherTalk...
On the server add the printer via IP address and select the correct PPD. In my case I have a couple of the same printer and wanted to setup a print center in a lab. So I disabled all sharing protocols on the server for each printer and then created a Printer Pool...
For some reason the particle printers weren't adding correctly to the clients so I deleted the printers and the pool (not sure in what order I did this).
Now on the client I can still see the Printer Pool and one of the printers from the server even when the service is disabled. The only way they disappear is when I shut the server down or pull it offline.
I found a website that describes this and how to fix it but it's based on Mac OS X.3.x. There must be more steps on Mac OS X.5?
http://macos-x-server.com/wiki/index.php?title=Myprint_queues_behave_erratically,_how_do_I_start_over_and_clear_out_the_oldqueues%3F

I observed the very same behaviour. One more reason not to use Apple's built-in print service.
Try deleting /System/Library/LaunchDaemons/com.apple.printserviceLPR_mDNSxxxxxxx.plist (where xxxxxxx is the name of the print-queue) and restart the server.
Regards
Michael

Hyperion Financial Reporting-Print Service is not Starting-11.1.2.1

Hi,
We are using Hyperion 11.1.2.1 and when i look at my Hyperion Financial Reporting-Print service it shows me at stopping and when i right click to stop/start it the options are greyed out.
I have completely stopped all the hyperion services and started them again and now the HFR Print service is showing me as Starting.
Kindly help me what should i do to resolve this issue.
You can see the screen shot at my blog.
http://hyperion-consulting.blogspot.in/2012/08/hi-we-are-using-hyperion-11.html
Regards,
AS
Edited by: Don'tKnow999 on Aug 30, 2012 9:52 PM

Hi John,
Thanks a lot for your reply. I saw the log file however i am not able to understand where the issue lies. Can you kindly hlep me out. Below is the FRPrintLogging.log
[2012-08-31T02:42:54.565-04:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vQRewCSs85njp2iZ1GG5mQ000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: lookupHsServer] [[
com.hyperion.reporting.util.HyperionReportException: Could not connect to the server.
Please make sure that the server is running as specified in the logon dialog (including port number if not default).
     at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
     at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
[2012-08-31T02:42:54.565-04:00] [EPMFR] [WARNING] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vQRewCSs85njp2iZ1GG5mQ000000,0] [SRC_CLASS: com.hyperion.reporting.config.FRConfig] [SRC_METHOD: getFRConfig] [[
java.lang.NullPointerException
     at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
     at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
[2012-08-31T03:12:21.914-04:00] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: <init>] Oracle Workspace
[2012-08-31T03:12:22.198-04:00] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: <init>] Copyright&#169 2000, 2011 Oracle and / or its affiliates.
[2012-08-31T03:12:22.198-04:00] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: <init>] All Rights Reserved.
[2012-08-31T03:13:46.993-04:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: getObjectFromURL] [[
java.net.ConnectException: Connection timed out: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:529)
     at java.net.Socket.connect(Socket.java:478)
     at java.net.Socket.<init>(Socket.java:375)
     at java.net.Socket.<init>(Socket.java:249)
     at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(DefaultProtocolSocketFactory.java:80)
     at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(DefaultProtocolSocketFactory.java:122)
     at org.apache.commons.httpclient.HttpConnection.open(HttpConnection.java:707)
     at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:387)
     at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:323)
     at com.hyperion.reporting.registry.FRSystem.getObjectFromURL(Unknown Source)
     at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
     at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
[2012-08-31T03:13:47.011-04:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: lookupHsServer] [[
com.hyperion.reporting.util.HyperionReportException: Could not connect to the server.
Please make sure that the server is running as specified in the logon dialog (including port number if not default).
     at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
     at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
[2012-08-31T03:13:47.025-04:00] [EPMFR] [WARNING] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.config.FRConfig] [SRC_METHOD: getFRConfig] [[
java.lang.NullPointerException
     at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
     at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
]]

Legacy Print Services (4.2.x)

Similar Messages

Maybe you are looking for