Legacy Replication Plugin for 5.2

I am planning to implement partial replication with 5.2. Any suggestion/link how to use this plugin.
Thanks

Fractional replication is documented here.
http://docs.sun.com/source/816-6698-10/replicat.html#14885

Similar Messages

SGI RGB Plugin for CS4 Broken?

I got the old legacy support plugin for my version of CS4, and I've read over these forum posts:
http://kb2.adobe.com/cps/404/kb404900.html
I can read an RGB successfully one time, but once I try to open another file after that it fails with:
"Could Not Complete Your Request because the plugin entry point could not be found."
If I restart PS it works, but again I can only load one file, then all the others after that fail.
I suspect its my operating system.
Using nVidia Quadro 2000 on Intel Xeon W3550 with 4GB Ram. XP Pro x64
PS CS4 V11.0 32Bit. (64 bit does not appear to have this problem)
Any suggestions?

You mentioned using Photoshop 11.0 and didn't list the minor revision... Have you installed the updates from Adobe? It's up to 11.0.2.
This is probably something you already know, based on what you've written, but just in case, I want to make sure you're clear that a 32 bit plug-in file is needed to work with Photoshop 32 bit, and that it needs to be put in a different place than a 64 bit plug-in for the 64 bit variant of Photoshop.
-Noel

Optional plugins for Photoshop CS6 - installation advice?

Where should I / how should I install the Lighting Styles folder and the 8bf, 8bi and 8ba files included in the optional plugins for Photoshop CS6? (Win 32)
Thank you in advance for your help.
Heather

Hi Heather,
If you have the 64-bit version of either of these OSes, then:
Windows 7 and Vista (32 bit): Program Files (x86)/Adobe/Adobe Photoshop CS6/Plug-ins folder
If you have the 32-bit OS version, then: Program Files/Adobe/Adobe Photoshop CS6/Plug-ins folder
The Lighting Styles folder just needs to be in the same directory as the LightingEffects plug-in.
Secondarily, why are you wanting to use the legacy plug-in? Is it because you don't a video card that can enable OpenGL drawing?
regards,
steve

Fedora 13: After upgrading from FF3.6 to FF6.0.2 I no longer have a Java plugin. How do I configure the Java Plugin for FF 6 ? There is no Java Plugin at the site

I am Fedora 13x64 bit. I just installed FF v6.0.2 from the FF download site. I backed up the existing FF 3.6 as firefox_old
I need to have a Java plugin to access company site, how do I configure the Java Plugin ?
At the Plugin area in FF6 there is no Java Plugin available, even after a search.
I have Java 1.6.0 installed in the OS at:
/usr/lib/jvm/java-1.6.0/jre/lib/amd64/libnpjp2.so
I googled how to configure Java Plugin for FF 6 for Fedora 13 and the trick was to create a soft link from /home/<userID>/.mozilla/plugins to the above libnpjp2.so

AVtech wrote:
. . . If a person can't get an answer here I don't know where else to turn since Sun certainly wouldn't offer tech support for a free product . . .These forums are user forums, and only occasionally visited by Sun employees. Sun does provide Java technical support options, although (of course) at a charge.
See:
http://developers.sun.com/services/
. . . I guess we'll just use JRE 5 until it's unsupported, whenever that will be. I'm still waiting for an answer on that question, too. See:
http://java.sun.com/products/archive/eol.policy.html
http://www.sun.com/service/eosl/
This document (part IV and Appendix) has some debugging and troubleshooting information that may allow someone involved in the problem to resolve the cause:
See:
http://java.sun.com/javase/6/docs/technotes/guides/plugin/developer_guide/contents.htm
Any steps that you can take to isolate the problem to specific Java versions, browsers, applets, web sites, operating systems (and versions), etc, would enhance the possibility of getting help.
You can try the applets at this Sun location and see if any of them are "slow".
See:
http://java.sun.com/javase/6/docs/technotes/samples/demos.html

Setting up the Apache HTTP Plugin for several BEA Servers

Hey together,
i would like to setup the apache http plugin for several bea-servers.
I am running apache 1.x on my hp-ux system. There are 2 bea-server-domains on this box and both should be proxied by the plugin simultaneously.
As far as i know it isn't possible to run 2 or more instances of the apache webserver. I heard of virtualhosts, maybe i should try this one out.
Somebody knows how to deal with this problem or does any1 know if virtualhosts could cope with my needs?
Thanks in advance

Ok here i am again and i'm stuck. Here my wishes again:
there are 2 weblogic-instances (domains) running on a machine xxx, instance A listening on port 8041, instance B listening on port 8051. I want to configure apache virtualhosts in combination with weblogic plugins, so that request with /ld will be sent to instance A while requests with /ldd will be sent to instance B. Both are no clusters. Therefore i tried it with the following configuration (httpd.conf):
<VirtualHost xxx:8080>
     DocumentRoot "/opt/hpws/apache/htdocs"
     ServerName xxx:8080
     <IfModule mod_weblogic.c>
     WebLogicHost xxx
     WebLogicPort 8041
     #MatchExpression *
     #PathPrepend=/test2
     </IfModule>
     <Location /ld>
     SetHandler weblogic-handler
     PathTrim /ld
     </Location>
</VirtualHost>
# VirtualHost2 = xxx:8090
<VirtualHost xxx:8090>
     DocumentRoot "/opt/hpws/apache/htdocs"
     ServerName xxx:8090
     <IfModule mod_weblogic.c>
     WebLogicHost xxx
     WebLogicPort 8051
     #MatchExpression *
     #PathPrepend=/test2
     </IfModule>
     <Location /ldd>
     SetHandler weblogic-handler
     PathTrim /ldd
     </Location>
Doesnt really work. Can some1 help please?
Thanks

Legacy data upload for Training & Event Management

As per the requirement, the legacy /history data for training events is to be uploaded in the system. To start the process the data templates were prepared for uploading training objects like D (Business Event Group), L (Business Event Type) and E (Business Event) and these were uploaded. Also the relationships A003 between D & L and A020 between E & D were also maintained. As a part of training history the attendees were also maintained (uploaded) using the relationship A025 between E & P objects. However when we go to PSV2, then the tree structure does not reflect the name of the person who attended the event.
Please suggest and advice.

Hi Nitin,
I have a query regarding the Legacy data. I wanted to ask you that how did you structure the Historical BEG and BET.
Did you create different BEG for the Current and the Legacy data.
But in that case there could be BET's common in both the current and legacy data with different object ids
For e.g. Under Current BEG and Historical BEG I may have a BET Technical Programmes with diffrent Ids say 60000000 and 60987655. This may create a problem when running reports.
Pls tell me strategy that you have used for creating the catalog.
Regards
Yashika Kaka

Can I do this with a plugin for Reader?

Hello, I'm totally new to Adobe Reader development and I'm in the need to develop a plugin for Reader that must implement certain functionality. Before starting, I think it's better to ask to the experts if what I want to do is possible or if what I need goes beyond what the Adobe API provides. So, if you're so kind, I'd like you to check the list of needed features and please tell me if they can be fulfilled with a Reader Plugin.
The plugin must work for Adobe Reader 7,8,9 and 10. It's not a problem if I need to develop a plugin for each version.
When the user tries to print a document, I will block/cancel the printing process depending on which document is tried to be printed (the full path to the document will be needed).
I need traceability in "Save as" and "Save as text" features, if the user saves a copy of "c:\file.pdf" into "c:\file - copy.pdf" I need to know both the source and the destiny of the save as operation. Same for any kind of "export to format x" operations if possible.
I need to be able to communicate with another module via named pipe to periodically send information. This might require dinamically loading a DLL and calling its methods.
[Optional] I need to restrict the use of the clipboard depending on the documents opened in Reader, i.e. don't allow to copy if a certain document is opened.
[Optional] If a document is exported via file printer (like Microsoft xps printer), I need traceability on this operation. I'm really pesimistic about this one.
Also, I'm assuming that retrieving the list of opened documents, or the "active" document will be possible at any time. Please, correct me if wrong.
Thank you very much for your time, for reading and helping. Im' not asking you to tell me how to implement every single feature, I just need to know if I will be able to implement them when I get some knowledge.
Have a great day. Greets.
Message was edited by: fernandoarrabal reason: bad phrasing

Two things.
First – Adobe no longer supports Reader 7 or 8, so you would be on your own for those.
Second, in order to develop a plugin for Reader you need to obtain a license from Adobe. Details and forms are in the Acrobat SDK. Start this process ASAP as that will tell you whether you will be able to do your plugin or not.

How to configure webserver plugin for IIS to fwd request to multiple server

Hi,
Have configured Sun One webserver plugin for IIS is configured as per the documentation - http://docs.sun.com/source/816-7156-10/agplugin.html
Have a requirement to forward the request to three different servers
Eg : http://www.host1.com/app1
http://www.host2.com/app2
http://www.host3.com/app3
Getting bad gateway error when this is configured in sun-passthrough.properties file
serverpool1.server=http://www.host1.com
serverpool1.passthrough=/app1
serverpool2.server=http://www.host2.com/
serverpool2.passthrough=/app2
Is this configuration wrong?
Thanks

First, set the user back to www or whatever it was. To do namebased virtual hosting, you'll need to change two things. The first is to add a NameVirtualHost directive to /etc/httpd/sites/virtualhostglobal.conf
This is one of the VirtualHost stanzas from my Linux box, you just have to adjust the paths for your machine:
<VirtualHost www.mydomain.com>
ServerAlias mydomain.com
ServerAdmin [email protected]
DocumentRoot /usr/people/httpd/html/www
<Directory /usr/people/httpd/html/www>
Options Includes
AllowOverride AuthConfig
</Directory>
ScriptAlias /bin /usr/people/httpd/cgi-bin/www
ScriptAlias /cgi-bin /usr/people/httpd/cgi-bin/www
</VirtualHost>
Restart Apache and you should be good to go. If there are errors, could you post them from /var/log/httpd/error_log ?
Roger

Third party plugin for premier pro cs6

I installed a third party plugin for premier pro cs6 on my mac and it's not loading... How can get premiere to see it in the program?

hi todd,
cart in front of the horse syndrome - wrote BEFORE reading the article. sorry ;-)
am coming from 10 years of vegas, unhappily so, but at my age 60+, i'm wary of anything new....

How can i create a plugin for adobe in design CS3

i'm trying to make a plugin to use it in adobe Indesign CS3 program but i can't
i'm using Windows 7
i had tryed to make a plugin using Eclips with indesign plugin editor and Visual studio C++ but i can't as i can;t find where can i write my code and there is also an error while debuging is that :
<error PRJ0019: A tool returned an error code from "Performing Custom Build Step">
after working out this error "by adding the directory of Odfrc.exe in tools->VC++ Directories->executable file" another error raise to me :
<Unknown compiler version - please run the configure tests and report the results> and the visual studio raise message box to me to specify the name of the executable file to be used for the debug session
i don;t know wat can i do know all i need to create a plugin for indesign program so could any one help me ??

Each version of the SDK has very specific demands for the compiler setup, and this in turn relies heavily on the operating system. The CS3 SDK probably was based on a much older version of Visual Studio.
Compare your toolchain against the requirements that should be stated somewhere in the CS3 documentation. It's a solid bet you are years ahead -- there simply is no reason for Adobe to keep on supporting all OSes and compilers that continue to appear, for a version of InDesign that's by now 2.5 versions old.

How can I create a search plugin for multiple fields

There are a number of sites that have search capabilities but they require entries into multiple fields.
One such site is for instance the IBM Employee directory.
(http://www.ibm.com/contact/employees/servlets/lookup)
On this site - in order to get usable results - I have to enter both First name and Last name of the employee I'm looking for.
I created a search plugin for the site, however I wasn't able to split the entered text into two parts and provide them as separate fields for the form.
Is there a way to do this?
Regards,
Imre

Hi,
This is excellent. Not search-plugin though but but this is as good as a search-plugin. (Even better, as I haven't seen any solution with the plugins for the problem.)
I didn't know that it was possible to use javascript as bookmark location.
Thanks,
Imre

Using XMP Lib in a plugin for CS5.0 Windows

Hello
I have been able to compile the XMP-Toolkit-SDK-5.1.2 and use it successfully in a plugin for CS5.0 Mac OS X.
Im now trying to do the same on windows, but with no luck. Im using MS Visual C++ 2008 express edition.
There seems to be a conflict between the XML library and msvcprt.lib library. If I try to exclude the msvcprt.lib library I get only one error.
If I try to exclude the msvcprt.lib i get the following problem:
1>PlugInStatics1.obj : error LNK2001: unresolved external symbol "__declspec(dllimport) public: __thiscall std::locale::id::id(unsigned int)" (__imp_??0id@locale@std@@QAE@I@Z)
I get the following linker problems:
1>XMPCoreStaticRelease.lib(WXMPMeta.obj) : MSIL .netmodule or module compiled with /GL found; restarting link with /LTCG; add /LTCG to the link command line to improve linker performance
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >(class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > const &)" (??0?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QAE@ABV01@@Z) already defined in XMPCoreStaticRelease.lib(XMPCore_Impl.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::~basic_string<char,struct std::char_traits<char>,class std::allocator<char> >(void)" (??1?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QAE@XZ) already defined in XMPCoreStaticRelease.lib(WXMPMeta.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: char const * __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::c_str(void)const " (?c_str@?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QBEPBDXZ) already defined in XMPCoreStaticRelease.lib(WXMPMeta.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >(char const *)" (??0?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QAE@PBD@Z) already defined in XMPCoreStaticRelease.lib(XMPCore_Impl.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: unsigned int __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::size(void)const " (?size@?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QBEIXZ) already defined in XMPCoreStaticRelease.lib(WXMPMeta.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: void __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::push_back(char)" (?push_back@?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QAEXD@Z) already defined in XMPCoreStaticRelease.lib(XMPUtils.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > & __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::assign(char const *,unsigned int)" (?assign@?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QAEAAV12@PBDI@Z) already defined in XMPCoreStaticRelease.lib(XMPCore_Impl.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: char const * __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::data(void)const " (?data@?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QBEPBDXZ) already defined in XMPFilesStaticRelease.lib(P2_Handler.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > & __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::operator=(class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > const &)" (??4?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QAEAAV01@ABV01@@Z) already defined in XMPCoreStaticRelease.lib(XMPCore_Impl.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >(void)" (??0?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QAE@XZ) already defined in XMPCoreStaticRelease.lib(WXMPMeta.obj)
Best Regards
/ Pontus Hulin

Hi Pontus.
You're probably mixing static libraries with shared.
Regards
Bartek

A little info about the iSync plugin for the N97

Several 3rd party developers have confirmed that something is broken in the way the N97 communicates via the iSync plugin. Nokia has changed, incorrectly implemented, or out right made something wrong and a firmware upgrade is DRASTICALLY needed or a plugin will NEVER work. The problem started with Nokia and ends with Nokia. They need to fix the problem with the N97. The developers feel that unless Nokia fixes this problem there will never be a plugin for the N97. It is as simple as that.
This is all the info that I have at the moment. For the time being the only way to sync your data is:
1. Prepare all of your data the way you want on your phone and then us Ovi. This can be a problem too as Ovi is not that great and is not very stable.
2. You can use Memotoo (www.memotoo.com) to sync your data via SyncML. I have used tried it and it works okay. Better than Ovi for sure but it costs.
3. You can use The Missing Sync by Mark Space (www.markspace.com - currently testing). It does not use the same way to sync via iSync plugins. The Missing Sync sends a plugin to your phone instead. The syncing is very stable and works flawlessly. The only drawback is that the phone plugin is not exactly designed for the N97 and it requires that the N97 needs to be reboot sometimes to sync. Other than this, the operation is flawless and it appears that Mark Space will be able to fix this one problem faster than Nokia will be able to fix their phone.
Hope this helps......
Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
Apple iPhone 5,
Retina MacBook Pro, iPad Mini, Nikon D4

Yes, once you have MfE, you can sync N97 to Google Calendar and Gmail Contact list. The Mac's iCal app can add the Google Calendar. For Address Book, there are two choices: Access Gmail Contact via LDAP, or do proper synchronization in iSync style (see http://lifehacker.com/393855/enable-google-contact-sync-without-an-iphoneipod-touch).
MfE is not "installed" by default in the N97, but it is actually there. I need to credit someone on this forum for mentioning it, but I'm afraid I forgot who. The steps are basically thus:
Basically go to the Menu -> App folder, look for Settings Wizard "Sett. wiz.". Try to setup an email account from there. Don't use your gmail account though (it seems like MfE tries to be smart when it recognizes some email domains and pre-selects some settings for you, but we need to be able to access some options to set on our own). Don't worry about this account, you can always delete it once MfE is configured. At some point of the setup, you will be asked what kind of server. Choose Mail for Exchange. This will trigger Mail for Exchange to be installed.
Subsequently you will see your MfE folder populated with Mail for Exchange and other stuffs. Get into it and configure your Gmail. Some settings to note:
Exchange server: m.google.com
Secure connection: Yes
Use default port: Yes
Username: Your gmail username (just the name, no need the @gmail.com part)
Password: For the gmail account
Domain: gmail.com (I believe blank is also ok, but mine is current set as such)
Make sure that synchronization is set for Contacts and Calendar only. Tasks must be disabled (it used to be because Google Calendar did not support Tasks, but even they do support Tasks now, it still breaks MfE). Email must be disabled.
Done.
I did have further trouble though. The sync keeps hanging and then eventually "Invalid Password" error (yah right, after sync halfway they realize my password is wrong... no, something else is mucked up). I eventually deleted my phone data, and re-sync it from Google again, and everything was fine.
Once you've got your phone data on Google, you can search Google for other tips on pulling the data into Mac.
Hope you have fun getting this to work.

Latest MediaSource Plugins for various Creative MP3 Players are now available for downl

Just went to the product support site. Guess what? The latest MediaSource plugins for the various Creative MP3 Players are now available for download. I am sure the latest plugins should have fixed several problems.
Don't forget to download the latest Creative MediaSource v3.30.2 too. Install the latest Creative MediaSource first before you install the MediaSource Plugins of your respecti've MP3 Players.
Note: According to the download site, the latest MediaSource plugins require you to have at least v3.20.57 of Creative MediaSource.

Thanks micromouse
... but there's no new plugin for the original Jukebox
I've always had trouble connecting to MediaSource with my JB and was hoping for a new plugin to sort all my problems.
PB

Petition for last.fm plugin for creative mediasource pla

If you want a plugin for Last.fm's audioscrobbler for your creative mediasource player, please post in this thread...once, please do not submit posts for any other reason
signature # - the_can

As a Last.FM moderator we see quite a lot of threads and requests passing by for a pplugin that would allow people to "scrobble" the tracks they played on any of Creatives MP3-players. (Take a look at http://www.last.fm/forum/276/_/26462, for example). The problem Last.FM faces here is that, by the looks of it, getting a timestamped log-file from plays on a Creative-player is not possible (don't quote me here, I am just the messenger, and have hardly any knowledge concerning the plugins...)I do know that there is a community that is pretty positi've about Last.FM and that moderators nor staff can help them here. Perhaps the nice people developing the software for your players might want to take a look at the site and decide that it might be a nice idea to open up the software a bit, or develop a plugin themselfs. It might prevent people (like me) from buying an iPod, which does allow me to submit my listened songs to the site...

Legacy Replication Plugin for 5.2

Similar Messages

Maybe you are looking for