Legal Control check failed

I am trying to create a PR thru Network activity (SAP PS- CJ20N) for short text item without material master with account assignment N, the system is triggering Legal Control check failed error. Any lights on this.
I am successful in creating PR for material master item for the same Project Network.
- TGB

Closed.

Similar Messages

Legal control check

Hi,
Is there any functional module that carries out the legal control check in simulation mode like transaction VX07 and give the result as legally compliant or not.

Closed.

Legal control error

HI ALL,
I am getting following warning message while creating sales order for some materials .
,we have Legal control for order typy (or) check as "c"--legal control check in dispatch and export area
"Reference number of a document from back error"
Legal control : custs prod. mast. required
material 225-654
material 225-789

Hi,
I was getting the same error recently with an item i have solved using t.code vi58.I don't know how far its going to help.
Pls try.
Regards,
Ramesh.

Cannot do Picking with Legal control block

Hi,
We have activated the legal control check (with license or not).
Currently, if the outbound delivery is block due to legal control, it does not allow to post goods issue.
with the error message "Item 000010 cannot be copied due to legal control"
We want to also prevent the delivery from pick & pack if it has legal control issue, not just during PGI.
Can we do this by configuration?

Hello G Dy,
You need to move your question to component 'SAP Global Trade Service', it is a GTS related issue.
SAP Global Trade Services (GTS)
To your question, I think you can get some ideas from SAP Note 579357.
Thanks,
Derek

Prevent ATP confirmation if license check fails

Hi
We are using SAP foreign trade ( legal control ) for controlling licensing requirements in sales orders. However, if a line item is on a hold due to failure license check, the schedule line is still confirmed thus blocking stocks against the line item.
We would like to hold the confirmation on the line item if it has failed license check.
Has anyone been able to achieve this ?
Appreciate your help
Regards
Rohit Zalani

Hi,
I have a similar requirement and I have proposed a solution which was accepted by my client since they have barely 2 or 3 line intems in a particular sales order. I do not know if this will really be helpful for you but you may give it a try.
The solution would be to place a reason of rejection (with description as approval block) at the item level. When a reason for rejection is placed on a particular item, it will not transfer the requirements to MD04. Once the approval is received you can remove the reason for rejection. This will again populate your requirements in MD04. I have tested and given it to my client and they are using it perfectly fine.
You can also include this reason for rejection in Incompletion log so that the user dosent forget to assign the reason fofr rejectio before saving the order. You can also get a report of rejected orders in VA05.
The downside of this is that if there are 100-200 or more line items in a particular order, then manually assigning a reason for rejection and releasing it would be difficult. You might have to think of some logic to be built to automate this.
Please let me know if this helps and if you find any alternate solution please update it in this thread.
Regards,
Rohan

EMC - Certificate status could not be determined because revocation check failed.

I've exhausted my resources on this issue and am reaching out for some assistance. I have setup Server 2008 R2 Enterprise SP1, running Exchange 2010 SP1. In EMC I have successfully imported a GoDaddy SSL certificate. Although I am receiving the message -
"The certificate status could not be determined because the revocation check failed."
Here are the steps I've taken to troubleshoot this so far:
[PS] C:\Users\Administrator\Desktop>netsh winhttp show proxy
Current WinHTTP proxy settings:
Direct access (no proxy server).
As you can see, direct access. Which is true, no proxy's on this network.
For good measure, I'll dump the urlcache.
certutil -urlcache ocsp delete
certutil -urlcache crl delete
Both return 0, reboot server.
Comes back up, same message in EMC.
From PS, I test exactly what its getting from GoDaddy.
[PS] C:\Users\Administrator\Desktop>certutil -f -urlfetch -verify mail.fluxlabs.net.crt
Issuer:
SERIALNUMBER=07969287
CN=Go Daddy Secure Certification Authority
OU=http://certificates.godaddy.com/repository
O=GoDaddy.com, Inc.
L=Scottsdale
S=Arizona
C=US
Subject:
CN=mail.fluxlabs.net
OU=Domain Control Validated
O=mail.fluxlabs.net
Cert Serial Number: 27b60918638e0d
dwFlags = CA_VERIFY_FLAGS_ALLOW_UNTRUSTED_ROOT (0x1)
dwFlags = CA_VERIFY_FLAGS_IGNORE_OFFLINE (0x2)
dwFlags = CA_VERIFY_FLAGS_FULL_CHAIN_REVOCATION (0x8)
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN (0x20000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
ChainContext.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
SimpleChain.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=1000040
Issuer: SERIALNUMBER=07969287, CN=Go Daddy Secure Certification Authority, OU=http://certificates.godaddy.com/repository, O="GoDaddy.com, Inc.", L=S
cottsdale, S=Arizona, C=US
NotBefore: 8/20/2011 7:49 PM
NotAfter: 8/20/2012 7:16 PM
Subject: CN=mail.fluxlabs.net, OU=Domain Control Validated, O=mail.fluxlabs.net
Serial: 27b60918638e0d
SubjectAltName: DNS Name=mail.fluxlabs.net, DNS Name=www.mail.fluxlabs.net
33 49 57 5d 6e d8 6b aa b9 61 73 95 44 07 c9 2e 55 6e 47 10
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
Element.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
Element.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 4
[0.0] http://certificates.godaddy.com/repository/gd_intermediate.crt
---------------- Certificate CDP ----------------
Expired "Base CRL (05)" Time: 4
[0.0] http://crl.godaddy.com/gds1-55.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
Expired "OCSP" Time: 4
[0.0] http://ocsp.godaddy.com/
CRL (null):
Issuer: CN=Go Daddy Validation Authority, OU=http://certs.godaddy.com/repository/, O="GoDaddy.com, Inc.", L=Scottsdale, S=Arizona, C=US
e5 53 19 6c 54 87 8c 62 23 1b b9 11 e1 d8 3d 3f b2 04 77 3f
Issuance[0] = 2.16.840.1.114413.1.7.23.1
Application[0] = 1.3.6.1.5.5.7.3.1 Server Authentication
Application[1] = 1.3.6.1.5.5.7.3.2 Client Authentication
CertContext[0][1]: dwInfoStatus=102 dwErrorStatus=0
Issuer: OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US
NotBefore: 11/15/2006 8:54 PM
NotAfter: 11/15/2026 8:54 PM
Subject: SERIALNUMBER=07969287, CN=Go Daddy Secure Certification Authority, OU=http://certificates.godaddy.com/repository, O="GoDaddy.com, Inc.", L=
Scottsdale, S=Arizona, C=US
Serial: 0301
7c 46 56 c3 06 1f 7f 4c 0d 67 b3 19 a8 55 f6 0e bc 11 fc 44
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
No URLs "None" Time: 0
---------------- Certificate CDP ----------------
Verified "Base CRL" Time: 4
[0.0] http://certificates.godaddy.com/repository/gdroot.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
Expired "OCSP" Time: 4
[0.0] http://ocsp.godaddy.com
CRL (null):
Issuer: OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US
da 1e d5 63 5c 05 58 50 4e db d2 4e e8 9d 28 9d c4 36 b3 1e
Application[0] = 1.3.6.1.5.5.7.3.1 Server Authentication
Application[1] = 1.3.6.1.5.5.7.3.2 Client Authentication
Application[2] = 1.3.6.1.5.5.7.3.4 Secure Email
Application[3] = 1.3.6.1.5.5.7.3.3 Code Signing
CertContext[0][2]: dwInfoStatus=109 dwErrorStatus=0
Issuer: OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US
NotBefore: 6/29/2004 12:06 PM
NotAfter: 6/29/2034 12:06 PM
Subject: OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US
Serial: 00
27 96 ba e6 3f 18 01 e2 77 26 1b a0 d7 77 70 02 8f 20 ee e4
Element.dwInfoStatus = CERT_TRUST_HAS_EXACT_MATCH_ISSUER (0x1)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
No URLs "None" Time: 0
---------------- Certificate CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
Application[0] = 1.3.6.1.5.5.7.3.1 Server Authentication
Application[1] = 1.3.6.1.5.5.7.3.2 Client Authentication
Application[2] = 1.3.6.1.5.5.7.3.4 Secure Email
Application[3] = 1.3.6.1.5.5.7.3.3 Code Signing
Exclude leaf cert:
b1 04 4b 90 a1 d3 48 de 46 bd d7 50 20 e3 44 b8 3f 68 39 f7
Full chain:
68 36 4d 37 2e 96 bd d2 aa 77 3f d0 e8 78 a9 e6 68 bd 7d 71
Verified Issuance Policies:
2.16.840.1.114413.1.7.23.1
Verified Application Policies:
1.3.6.1.5.5.7.3.1 Server Authentication
1.3.6.1.5.5.7.3.2 Client Authentication
Cert is an End Entity certificate
ERROR: Verifying leaf certificate revocation status returned The revocation function was unable to check revocation because the revocation server was
offline. 0x80092013 (-2146885613)
CertUtil: The revocation function was unable to check revocation because the revocation server was offline.
CertUtil: -verify command completed successfully.
As you can see, the "revocation server is offline."
So I run the same test from another server on the LAN.
Verified Issuance Policies:
2.16.840.1.114413.1.7.23.1
Verified Application Policies:
1.3.6.1.5.5.7.3.1 Server Authentication
1.3.6.1.5.5.7.3.2 Client Authentication
Cert is an End Entity certificate
Leaf certificate revocation check passed
CertUtil: -verify command completed successfully.
It passes. The server's firewall has been disabled. DNS cache has been cleared. I have verified everything I can, and still failing to verify.

[PS] C:\Users\Administrator\Desktop>Get-ExchangeCertificate |fl
AccessRules : {System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKeyAccessRule, System.Security.Acces
trol.CryptoKeyAccessRule}
CertificateDomains : {mail.fluxlabs.net, www.mail.fluxlabs.net}
HasPrivateKey : True
IsSelfSigned : False
Issuer : SERIALNUMBER=07969287, CN=Go Daddy Secure Certification Authority, OU=http://certificates.godaddy.com/repository, O="GoDaddy
, Inc.", L=Scottsdale, S=Arizona, C=US
NotAfter : 8/20/2012 7:16:57 PM
NotBefore : 8/20/2011 7:49:30 PM
PublicKeySize : 2048
RootCAType : ThirdParty
SerialNumber : 27B60918638E0D
Services : IMAP, POP, IIS, SMTP
Status : RevocationCheckFailure
Subject : CN=mail.fluxlabs.net, OU=Domain Control Validated, O=mail.fluxlabs.net
Thumbprint : 3349575D6ED86BAAB96173954407C92E556E4710
[PS] C:\Users\Administrator\Desktop>Enable-ExchangeCertificate -Thumbprint 3349575D6ED86BAAB96173954407C92E556E4710 -Services POP,IMAP,SMTP,IIS
The command has already been executed. Yes, I have seen those sites. Neither have worked. Like I said, it is directly connected; and no proxies are set.
-- Jeremy MCSpadden Flux Labs

Foreign Trade - Legal Control for scheduling agreements

We are on version 4.6C and I am setting up the legal control for my company. It seems to work quite well for sales orders but then when I went in to configure scheduling agreements it errors and tells me you cannot do legal control for document type "E" which are typically scheduling agreements.
I cannot find any documentation on this. Does anyone know why legal control does not work for scheduling agreements and/or is this functionality available in the Global Trade Services module??
Thanks in advance for any and all help!!
Debbie

Jean,
I have done a Foreign trade implementation.
The core team of the client are FT experts and they would tell you about the legal requirements. Your job is to map them in SAP FT.
In this process you would gain Knowledge about Foreign trade regulations of that country. Remember its country specific.
The ECCN's are provided by the client. Info abt the same is extensivley available on the NET.
You have to get the list of all the mtrls which fall under the controlled cantegory of the respective commerce ministry and then start the config setting these mtrls as relevant for FT checks.
Thanks
Vishal

Deactivate "Legal Control" service

Hello gurus,
we would like to use the Sanctioned Party list Screening ONLY.
Now, we had an export customer order that was blocked because of the Legal Control service. We checked the protocols and found out this was because of incomplete customizing for that service. We had not maintained all the setting because we did not want to use the service anyways.
So, I went to IMG -> SAP Global Trade Services -> SAP Compliance Management -> u201CLegal Controlu201D Service -> Activate Legal Regulations and deactivated the active Legal Regulation for exports (i.e. set u201CLegCtrExp.u201D to u201CCheck: Not Activatedu201D).
The result is that the export orders do not get blocked any more, but there is a warning saying u201CUnable to find any active legal regulations for determination proc. u201CLELDTu201Du201D.
Although this is no real problem, all the yellow warning signs do not look good and I wonder if it is possible to deactivate the u201CLegal Controlu201D service all together.
Any ideas on this?
Thanks
Alicia

Hi,
Depending on the version of GTS you are using and what part you still want to have activated there are several solutions.
1. in General Settings / Legal Regulations / Define Legal Regulation, delete the country assignment to the Legal regulation
or
2. in the same customizing point you may delete the legal regulation totally, if you need it again you can then make an adjuster with the 000 client
3. SAP Compliance Management / General Settings / Document Structure / Activate Document Types -> delete the document types for Legal Control.
Regards.
Marc

Custom Document & Custom Doc Legal Control Extraction into SAP BI

Dear All,
After all the business content for GTS was activated in GTS and SAP BI, the following configuration steps were taken in GTS to extract this data into BI for
reporting:
[1] Integration with Other mySAP.com Components > Data Transfer to the SAP Business Information Warehouse > General Settings > Maintain Control Parameters for Data Transfer [Used ECC as guide]
[2] Global Trade Services > General Settings > Organizational Structure > Control Settings at FTO Level for SAP NW Business Intelligence (BI)
Inserted new records missing when comparing to Assgmt of Feeder System Grouping Org.Units to LLS Org.Units table [/SAPSLL/TCOOGS]
Turned on BI Active flag for all records
[3] Global Trade Services > General Settings > Document Structure > Define Document Types for Application Areas
For each document type in all the folders, turned on ‘transfer to SAP Netweaver Business Intelligence Active’ flag where it was available to be turned on.
[4] Global Trade Services > General Settings > Document Structure > Define Item Categories for Application Areas
For each item category in all the folders, turned on ‘transfer to SAP Netweaver Business Intelligence Active’ flag where it was available to be turned on.
Focusing on custom document and custom document legal control extractors, the data comes from /SAPSLL/CUIT which contains 113K records in development, however, the amount of data extracted into BI is minimal. So I have a few questions:
Did I miss any additional configuration swithces to extract into BI?
SAP Documentation: You have entered a unit of weight in the table for GTS: Control Settings at Foreign Trade Organization Level. This unit of weight must be the common unit of weight that you want to be used in strategic reporting in BI . The values in the fields for gross weight (WEIGR), net weight (WEINE) and unit of weight (WEIDI)
depend on the unit of weight you maintain at FTO level in the IMG for converting weights for SAP BIDoes each FTO need to be insert with different unit of measure? ie FTO123 UoM = EA; FTO123 UoM = CS; FTO123 UoM = KG
Should all the data records from /SAPSLL/CUIT be extracted into Custom Document DSO [0SLL_DS01]? If no, why? If yes, refer to pt 1 and what am I missing?
SAP Documentation: Only data that belongs to the legal controls for the following legal regulations is transferred to BI:
German Foreign Trade Laws
Prohibitions and Restrictions
Other What is the significance of these legal controls that SAP has decided to only transfer this type into BI? If the client want additional legal controls, would it be possible to extract them into BI?
If anyone is currently using the std content for BI reporting, any assistance with my questions would be appreciated.
Sincerely,
Claire

Hi Claire,
Your customizing looks correct. But the amount of data extracted depends on your condition you have defined during extraction(e.g. Creation Date)
Also in the coding only /SAPSLL/CUIT~ITSTA = space (Standard Item) and A (Item is allocated) is considered in 0SLL_CD_1.
You could find out reason by debugging to find out exact reason.
T-code: RSA2 , Enter Data source : 0SLL_CD_1. Then click display.
Click Extract check ( Shift + F8 ) and put break point in coding FM : /SAPSLL/BW_GET_CD_1
Best regards,
Vincent

FT Legal control license locked status

When creating legal control licenses using VX01N the license type is configured with certain items to check such as ECCN number, customer number or destination country. Within those records is a status that shows a lock. The lock is either unlocked meaning it has not been assigned to any sales orders or locked meaning it has been assigned to a sales order.
I have created a particular license type to check internal control of drawings we export our plants around the world based on part number. This means that the check will happen with multiple orders and I want it to release automatically. It seems we find that the first order releases automatically and locks that record but then any subsequent order for the same license red lights and we must manually assign it to the order. Is there any way that anyone knows of the allow multiple automatic releases for a single license?? Is this normal for these documents in SAP to only allow automatic releasing only one sales order or do I have something wrong in my configuration?
All help is greatly appreciated!!! Have a great day!!!
Debbie

Debbie can you explain to me how you configured it. I am on a similar project where the requirement is to allow customer service to create orders but block them from delivering until they are checked. Your solution seems to fit the criteria. We need to maintain liscences and all. I am new to this area so your steps in detail would be helpful.

Legal control--- legal regulation.

Hi
Can anyone please give the difference between legal control and legal regulation.
I have little bit confusion between these two.
please provide some examples.

Hi Gopala, In legal control maintain master data and business transactions in accordance with the legal requirements for imports and exports. Also use monitoring and simulation tools that help to ensure that your business is compliant with current import and export laws. Legal control includes checking business transactions for products that require licenses, as well as the check for embargo situations for these business transactions. Activate legal control for imports and exports, along with embargo checks. Whereas the legal regulation defines how the system determines suitable export licenses based on the determination sequence, license types (which differ according to the government agency), and the export control classification number (ECCN). Legal regulations for export are based on the country of departure and should therefore be activated to check for export licenses. Legal regulations for import are based on the country of destination and should therefore be activated to check for import licenses. Ashish

Legal Control : Document Type Mapping not Maintained

Getting an error SAP GTS :Legal Control : Document Type Mapping not Maintained ,while creating order in feeder system .
I checked the configuration maintained SAP Global Trade ServicesSAP Compliance ManagementGeneral SettingsDocument StructureAssignment of Document Types from Feeder Systems-Assign Document Type at Feeder System Group Level
Similarly I checked for item category.
Please let me know what further configuration have to be maintained for correcting the error.
Thanks & Regards

Hi,
The document type mapping is required in R/3 system too. You have to maiatain order type say OR/TA in R/3 below path
IMG--> Sales and Distribution --> Foreign Trade/Customs --> SAP Global Trade Services - Plug-In --> Control Data for Transfer to SAP Global Trade Services --> Configure Control Settings for Document Transfer --> SDOA.
Note: If you maintain OR in R/3, you will have to maintain same in GTS. if you maintain TA in R/3, same maintain in GTS.
Regards,
Lakshmikanth

Foreign trade - legal control.

Hello,
Could you please tell me what skills/informations are needed to configure the Legal control? I mean although I understand the function and know how to configure, I have to read the foreign trade law to map the law into the system.
I think the information in foreign trade law is so huge and it is hard to define export control class number, license type etc in system by myself.
Do you have any experiences regarding this problem?
Many Thanks
Jean

Jean,
I have done a Foreign trade implementation.
The core team of the client are FT experts and they would tell you about the legal requirements. Your job is to map them in SAP FT.
In this process you would gain Knowledge about Foreign trade regulations of that country. Remember its country specific.
The ECCN's are provided by the client. Info abt the same is extensivley available on the NET.
You have to get the list of all the mtrls which fall under the controlled cantegory of the respective commerce ministry and then start the config setting these mtrls as relevant for FT checks.
Thanks
Vishal

Assign Scheme for Numbers in Legal Control not appering in number schemes

Hi,
Assing Scheme for numbers in legal control level is not appearing in Assign Numbering Schemes to legal Regulations of the application at number schems. Please check attached screen shot.
Thanks and Regards,
Alihamed.sa

Hi Alihamed,
Maybe that feature wasn't included in the early GTS 10.0 shipment? You really ought to apply the Support Packages (SP19 is now available).
But take a look in table VCLSTRUC (using Transaction SE16), and see what entries you find with VCLNAME = /SAPSLL/VC_CTS_LGREG. The one you're interested in is PREDOBJECT = /SAPSLL/V_TLU9LD. If it's not already assigned, see if it's available in the drop-down list.
If that entry is available, you could try adding it to the assignments, and see if that solves the problem.
Otherwise you should still be able to configure by adding entries to view /SAPSLL/V_TLU9LD using Transaction SM30.
Hope that helps.
Regards,
Dave

GTS Error " SAP GTS : Legal Control : P.O is locked"

Hi,
I am getting the error saying " SAP GTS : Legal Control : P.O(4502089260) is locked".
Pls help me.
Regards,
krishna

Hi Leela,
You should check the document in GTS directly whether it's just "lame" block or a real hit. If it's not a hit (the Business Partner may have been found as SPL relevant because too sensitive settings etc.) you just manually unlock the document. To do this follow the path:
- go to /sapsll/menu_legal
- SAP Compliance Management > Sanctioned Party List screening
- In part Documents click Manually Release Blocked Documents
- Enter Document number
- Select (Mark) the document
- Press Green Flag icon (Cancel Boycott List Block)
- Maybe you will need to recheck the document (the same menu as release)
Keep in mind the procedure works if there's set SPL block only.
Best wishes,
Roger

Legal Control check failed

Similar Messages

Maybe you are looking for