Legal to use iWork '09 from box set without the box set?

I purchased iWork '09 from the Mac Box Set off of ebay. It was for only the iWork software and not the entire set. The seller is telling I can legally have this software installed and use it even though the bx set comes with one serial # for all software included in it.
I did find a post on a different forum that states it is illegal to sell parts of the set separately. Is any of this true? Am I okay to have this software or should I return it? I am worried since I have a business which will use this software and just want to make sure there is never a chance for repercussions in the future.
Thanks

Yep. One of the reasons to be quite careful about dealing on eBay. Here's what's provided at the online store:
The Family Pack Software License Agreement allows you to install and use one copy of the Apple software on up to a maximum of five (5) Apple-labeled computers at a time as long as those computers are located in the same household and used by persons who occupy that household. By “household” we mean a person or persons who share the same housing unit such as a home, apartment, mobile home, or condominium, including students who are primary residents of that household but reside at a separate on-campus location. This license does not extend to business or commercial users.

Similar Messages

  • I have an apple tv 3 but when i use Home Sharing from my Windows Laptop the Apple TV shows all my music on the TV but it will only play 1 or 2 songs and then stops!!! Annoying, so I have to re-start iTunes on my Laptop and it will play 1 or 2 more songs

    I have an apple tv 3 but when i use Home Sharing from my Windows Laptop the Apple TV shows all my music on the TV but it will only play 1 or 2 songs and then stops!!! Annoying, so I have to re-start iTunes on my Laptop and it will play 1 or 2 more songs then stops again!!! still annoying.
    Can anyone assist me with this issue?
    Thanks

    To downgrade, you'll need to download the previous software version here: ATV3 http://appldnld.apple.com/AppleTV/041-4361.20120605.grjot/AppleTV3,1_5.0.2_9B830 _Restore.ipsw
    ATV2: http://appldnld.apple.com/AppleTV/041-4362.20120605.t8i4U/AppleTV2,1_5.0.2_9B830 _Restore.ipsw
    Next, plug the Apple TV into your computer with a micro-usb cable (most phones today use these) and start up Itunes. It should detect the Apple TV in recovery.
    After that, hold down Option on Apple or Alt on Windows and click Restore. This should open a window that allows you to select the software update you want to apply. Select the one you downloaded earlier.
    It will then go through the restore process, which takes only a few minutes, and then you will be able to plug the Apple TV back in to your display and set it up again.
    I recently ran into a similar issue with a bunch of these things and after restoring them all to the previous software version they are working again.

  • HT201250 Can I restore photo files from Time Machine without the use of an external drive?  I'm trying to restore lost photo files and I see them listed in Time Machine (without use of an external drive), but when I try to restore I get a error code 36.

    Can I restore photo files from Time Machine without the use of an external drive?  While I was transferring photos back and forth from a thumb drive something went haywire and my IPhoto was wiped clean!  When I click on Time Machine I see all the dated pages (without an external storage drive connected), go back to a date where all my photo files are there, click "restore", and I get the message:  "The Finder can't complete the operation because some data in file cant be read or written (error code - 36)"

    Thanks so much Terence.  I tried some of the fixes from that page, but then discovered the suggestion to compress the Time Machine Back up of the original library and transfer it as a zip back to my computer as detailed here:
    http://pondini.org/TM/E9.html
    That worked like a charm.  I really appreciate it. 

  • How do I use just the audio from a clip without the video?

    Can't remember how to use just the audio from a clip, without the video.  FCP X can't select like FCP&

    Edit just the audio into the timline.
    The disclosure triangle next to the edit buttons.

  • How can I delete songs from iphone 4s without the songs synching back with itunes?

    How can I delete songs (forever) from iphone 4s without the songs synching back with itunes automatically?
    My settings are , handle songs manually.
    Best regards PelleRPG

    I did this with about 100 songs, and the problem is everytime I connect my iphone with itunes, It will automatically sync back every single song I did delete on the phone by swiping.
    I did search on google and found out that serveral people has this problem. The songs wont delete from itunes library.
    So why do they even make this function if it only deletes the songs for a short time?
    Best regards PelleRPG.

  • Can I use mp3 files from different domain as the feed?

    Hi..
    I have just created a new podcast here:
    http://artistsofliving.com/?feed=podcast
    I would like to submit the podcast to iTunes sometime soon...
    However, I'm wondering if they will reject it because the feed lives on 'artistsofliving.com', whereas I keep the media mp3 files on 'livinginthepresent.com'... a different domain.
    I own the mp3 content and both domains- I'm splitting the media from the website for bandwidth reasons.
    Is this ok? If this causes a rejection straight out is there a way to indicate that I own the material fairly?
    Thanks!
    -rich

    There's no problem about using media files from any source: the feed just has to reference them (the URLs have to be 'absolute' - i.e. including the http:// and the server name - even if the file is on the same server as the feed anyway). I don't see the fact that some files have different URLs leading to accusations of copyright breach.

  • Just purchased a iwork software from jbhi where in the pack is the registration numberf where is the

    Just purchaed iwork - family pack from JBHIFI where is the registration number

    Myeh - I'm not really in any rush. I work from home as a private contractor. I tell you - it is so much more ... relaxed? ... than when I was working for my previous employer. My current employer wants the product finished by June. Thats when they have a big push of students coming in and want the new software ready for them. So, I've got a while - and it definitely wont take me that long to complete. I just figured that there must be something to the fuss about IDEs and how they simplify things. And, tonight, I found that that is a load of horseshit.
    (Just so you know - there is a downside to working for yourself... you get weird requests from people like the following ...)
    I had a guy once ask me to write an application for his son who is obsessed with the television show Alias. He said he wanted a program that did exactly what this Alias program did on the show in a particular episode. When asked if I was familiar with it, I said no. So what does this goofball do? He goes and buys the show on DVD and brings it to me. We watch it - he takes me to the point in the show and says "That! Right there! That's what he wants!!"
    Astonished (and somewhat dumbfounded) I ask him, "You're aware of the fact that I am not going to be capable of writing an application that remotely logs into a secret NSA super-computer via satellite ...... right?" He then proceeded to tell me to make it look like it does. Just make up all sorts of stuff - just as long as it looks the same.
    The worst part .... that wasn't the only request of the type that I've received. (Granted, the others were by kids - usually 14 or 15 that thought that I'd do it for 10 or so bucks.) Because I obviously have time to waste on such things ...

  • TS4006 How do I remotely unlock an iPad using this app from my iPhone once the user has connected to WiFi?

    How do I remotely unlock an iPad using the Find My Phone app from my iPhone once the iPad is connect to WiFi?

    I'm not sure about the apps, but to prevent theft, you'll also need to disable the power button and the ability to restore the ipad. You might also want to superglue in your Sim card because if they remove that, it wont be tracked unless they connect to WiFi.
    Also, I'm not so sure it is an app on the iPad. I think it is built into the mail, calendar and contacts options if you have a Mobile me account.  http://www.apple.com/ipad/find-my-ipad-setup/

  • How can I use ms components in a computer without the setup of ms?

    I writed a program with the use of the ms components in computer which set up the ms, but now when i generate the exe , and i want to use it in a computer without the ms , how could i do ?? thanks !

    Hi SijinK,
    Iam also facing similar problem.
    When I try to run my CAN application on a system on which NI-CAN s/w is not installed. It gives the error
    "Application failed to initialize properly (0xc0000142)" [error message is attached]. I included all the NI-CAN DLL's[list got using the Depends utility] under my application setup [built using InstallShield V10.0]. It copies the DLL's to the C:\winnt\system32 directory.
    Am I missing any step like registering the DLL's, etc.
    Can you/anyone please help ...
    Thanks in advance
    Vinayak
    Attachments:
    CanAppErrMsg.bmp ‏191 KB

  • Is it legal to use iWork fonts for business?

    Hey,
    am I allowed to use the fonts in iWork for a business? I am going to found a new company so I have to design a logo, brochures,...!
    I do not want to get sued by Apple for using their fonts illegaly
    Thanks:)
    Timon
    BTW: I am form Germany so my English is not perfect!

    Most of the fonts installed in the operating system aren't Pages components.
    So it's not only the Pages  license but the system one which must be studied.
    The PDF whose subsets are posted above contain the terms of use in these languages :
    Yvan KOENIG (VALLAURIS, France) lundi 13 février 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
    My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

  • Which command I can use to exit from a subvi without exiting from labview in run-time?

    Similiar to 'Exit Sub' command in Visual Basic.

    > Similiar to 'Exit Sub' command in Visual Basic.
    There isn't a command to do this. Since LV is a dataflow language, it
    is important that all the data be delivered to the output terminals.
    BASIC is a procedural language, with all sorts of control flow commands
    like this, and if you are using a functional language or a dataflow
    language, you simply focus on getting to the end of the function. If
    you are in a while loop, you terminate the while loop by the value going
    to the conditional terminal. If you are in a For loop and need to exit
    early, perhaps it should have used a while loop. If there is code in a
    normal diagram that you sometimes do not want to execute, it should
    probably go in a case structure.
    The other reply has some good suggesti
    ons in that you probably have a UI
    or a sequence that you want to exit out of. Organizing your code so
    that you are in a button handling state or exiting state will help you
    organize how you think about the transitions between states. On the
    other hand, there lots of examples and user contributed VIs to look at.
    I'd recommend you get comfortable with a few of them since the state
    machine is just one programming tool, just like the loop and case
    statement that it is built from.
    Greg McKaskle

  • I am using Activex controls from Labview to log the data into Excel spreadshee​t. My applica

    tion is running fine without giving any error messages. But even after the vi stops, excel process does not shutdown. "Excel.exe" process keeps running until I end it from Windows NT Task Manager. Is there any way to end the excel.exe process from Labview?

    tion is running fine without giving any error messages. But even after the vi stops, excel process does not shutdown. "Excel.exe" process keeps running until I end it from Windows NT Task Manager. Is there any way to end the excel.exe process from Labview?I use Excel Active X control frequently to save and then analysis test data. In order to properly destroy the "Excel.exe" process it is important to close all the automation refnums opened when using the Excel active x controls. After completing your desired Excel task wire all the refnums in reverse order they were created into the Automation Close function in Functions->Communication->Active X pallette. This includes all Application, Workbook, Worksheet, or Range refnum. Missing even one of these refnums will mean that Excel.exe will still persist in the task manager and cause problems when excel is opened from outside LabVIEW. I hope this helps.
    Stephan

  • Using Ac Charger from iPOD mini on the Video iPOD would it work??

    Hi, I just got a video iPOD and it didn't come with any wall charger, can I use the charger from my iPOD mini to charge it? Would it damage my video iPOD? Thanks

    Yes, you can use it to charge your new iPod.
    It won't damage it.

  • Does anyone know how to use music transfered from another phone to the iphone as ringtones?

    Does anyone know how to use ringtones that I put on my iphone from my previous phone? It went in as music and now I cant use as ringtones and figure out how to put it as ringtones.

    Two ways to do this:
    Download an app, such as RMakerPro, which uses music on your phone to create ringtones.
    Plug in to iTunes and find where your ringtones are listed. Drag them to your desktop, and then you will need to change the file type to .m4r, which can be done at www.freefileconvert.com.

  • My iPhone won't sync calendar to iCloud, only to Google calendar, which I've never used. Events from iCloud sync to the phone and to Google.  Huh???

    My iPhone 3GS (ios 5.1) won't sync calendar to iCloud, only to Google calendar, which I never authorize or use.  Yet when I entere an event on the iCloud calendar, it syncs to the iPhone (and to Google calendar) just fine.  Any suggestions?

    Welcome to the Apple community.
    iCloud cannot sync with Google calendars, so it would seem that you may be using the wrong calendar account. Click on the calendar button in the top right hand corner of the calendar app and check which calendar you are adding your events too.

Maybe you are looking for