Legato networker 6.1.1 and rman

I have an installation of oracle 8i on AIX, and legato networker 6.1.1.
I need to link the legato networker 6.1.1 to oracle so that I can trigger rman backups.
The liblsm.a provided in the installition cd of oracle is for version 5.5 as documented in the installation notes for AIX. What must I do for legato 6.1.1 ?
Thanks for your help

Iphone 5 telefonlarının 6.1.3 ve 6.1.4 yazılımlarında, telefon kilitliyken kısa yoldan kamerasını açıp çekim yaptığınız sırada, gelen aramayı cevaplayıp kapattığınız anda telefon tamamen kilitleniyor. hiçbir şekilde ekran ve menü tuşu çalışmıyor. sadece açma kapama düğmesinde kapamayı aktifleştirip vazgeç dediğinizde düzeliyor.Normalde çekime devam edebiliyor olmalı.

Similar Messages

Problems of sap 3.02 with legato networker 7.1.3

Hi,
The first many thanks for the help.
I upgrade my server(HP-UX) with the client of legato networker 7.1.3 and sap 3.01 to the version sap 3.02. I am waiting very time to start my backups the time is excesive.The storage node is a HP-UX server.
With the old version of SAP 3.02 was perfect, the start of backup was very fast.
Can I resolve this problem? what is the solution?
Rgds...
Antonio
[email protected]

I forgot the next information:
When I launch my backups i must wait 1 hour for the start of it, this happen after
upgrade to the version sap 3.01 to sap 3.02.
The process has the next steps:
1.- the server netwoker send information to storage node (OK).
2. the storage node send information to client (OK).
3. client operating on Oracle BBDD (slow, one hour)
4.- backup runs ok.
do you undestand me the question? Can yo help me please?.
Rgds....
Antonio

Rman and legato networker

I have an installation of oracle 8i on AIX, and legato networker 6.1.1.
I need to link the legato networker 6.1.1 to oracle so that I can trigger rman backups.
The liblsm.a provided in the installition cd of oracle is for version 5.5 as documented in the installation notes for AIX. What must I do for legato 6.1.1 ?
Thanks for your help

A "restored" controlfile can be from either of
a. An RMAN Backup (ie a backup created by a BACKUP CONTROLFILE command in RMAN or CONTROLFILE AUTOBACKUP)
b. A manual / scripted Binary Backup (one created with the SQL command "BACKUP CONTROLFILE TO filename")
c. A controlfile recreated from a script (eg where the script was generated by the SQL command "BACKUP CONTROLFILE TO TRACE ")
In the first two cases, the restored controlfile also contains information about RMAN Backups made as of upto the point of the controlfile backup . Therefore, even in the absence of an RMAN Catalog, such a controlfile can be used to issue RESTORE DATABASE commands -- it can only restore from backupsets that it knows -- backupsets that were "registered" into the controlfile before the controlfile backup was made.
In the third case, since the controlfile is recreated afresh, it has NO "knowledge" of database backups (backupsets). A simple "RESTORE DATABASE" cannot be used. Either backupsets must be re-registered into this controlfile with the "CATALOG" command OR an RMAN Catalog must be used (as the Catalog has information about Database Backups and the names of the backupsets containing these backups).
Hemant K Chitale
http://hemantoracledba.blogspot.com

Howto integrate rman 9 with legato networker 6

Hi,
I have the following on one node:
SUN os 5.9
Legato Networker 6.1.3 (client)
oracle server 9.2.0.5
How can I integrate rman with legato networker? Which is the library needed?
thanks in advance,
Fernando

Hi,
many thanks for the info. I've created the symbolic link, but when I make a backup to sbt, rman says:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on T1 channel at 12/15/2008 14:42:01
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2
I also tried with sbttest:
The sbt function pointers are loaded from libobk.so library.
-- sbtinit succeeded
-- sbtinit (2nd time) succeeded
sbtinit: Media manager supports SBT API version 2.0
sbtinit: vendor description string=BMO v3.0
sbtinit: allocated sbt context area of 536 bytes
sbtinit: Media manager is version 3.0.0.0
sbtinit: proxy copy is supported
sbtinit: maximum concurrent proxy copy files is 0
-- sbtinit2 succeeded
-- regular_backup_restore starts ................................
sbterror failed for function sbtbackup
It seems that rman cannot connect to legato's libraries.
any clue?
thanks in advance,
Fernando

Legato networker license ?!

SunFire V880
Sun StorEdge Autoloader L8
Sun StorEdge Enterprise Backup (Legato Networker 7.2)
Solaris 8
Oracle 9.2
Legato is successfully using for backup local file system and backup of oracle database at the remote linux server. It is also nessesary to make backup of local oracle database.
license is ok: nsradmin -c "type:NSR license: type: NSR license; name: "NetWorker Module for Oracle, UNIX Client/1"; comment: oracle; enabler code: xxxxxx-xxxxxx-xxxxxx; host id: xxxxxxxx; expiration date: Authorized - No expiration date; auth code: xxxxxxxx; Problem description: When trying to make backup the database the following error is raised: ORA-19511: Error received from media manager layer, error text: nwora_open_backup: unable to start save session with server orasrv3: The feature "NetWorker Module for Oracle, Windows Client/1" is not properly enabled for client orasrv3. Why it is querying for Windows client license? - Client and server are on the same host(solaris)! Thanks, Roman 

Some times it is as easy as configuring the client (ensuring it is Unix) and having it assigned to the appropriate schedule/pool/etc, some times you will have to specify a specific schedule, client, server in your RMAN create channel env='{..... ]' parameters. It's usually the rman channel parameters. If you can't figure it out have a look at EMC/Legato's website.

Oracle Backup End to End Automation with BRBACKUP and RMAN

Hi,
We are about to implement a Oracle on mySAP 2004 or 2004 i.e. either NW2004 or NW2004s. Currently we are on DB2 UDB.
We are going to use legato for backup.
legato networker module (I guess this is module built for BACKINT) for SAP is too costly, so we are looking at alternatives for backup using legato without using networker module.
We have virtual tape library (disk that emulates as tape library). we plan to keep 30 days/versions of backup there.
Can we use BRBACKUP and RMAN to achieve end to end backup automation without using networker module by using the BRBACKUP delivered options and integrating to RMAN.
I do see BRBACKUP options like tape_box and pipe_box. Are these will be useful to achieve this.
Other question is do we really need to integrate with RMAN. What are the advantages.
So far I see the advantages with RMAN are 1. incremental backups. 2. Online backups are handled more consistently than normal.
Appreciate your information.
Thank you,
Ravi Gandavarapu.

Hi Jason,
Yes, we have SAN storage. Also thinking to use split-mirror for production.
Do this need legato networker module. Or we can put a script without out the module also?
>>There is one little complexity to this but if you're interested I'll explain it. <<
Would you please explain what it is ?
Again for my dev and qa systems we are not planning split-mirror.
My plan is to back them up straight to VTL (disk based). Do you think using RMAN here helps (because of incremental) ?
I was recently going through 10g features. Looks like 10g has a feature that you can merge incremental with level0. Does brbackup supports this?
Appreciate your info.
Ravi Gandavarapu.

Tape rotation on EBS 7.2 Legato Networker

I have Sun Enterprise Backup Software aka Legato Networker 7.2 with autochanger.
How to make scheduled tape rotation?
Every weekday a new tape should be loaded.
Peter

A bit strange.
Just removing and adding Networker packages again solved the problem.

ZFS backup -- Legato Networker / Solstice Backup - supported?

Does Legato Networker/Solstice Backup support backing up ZFS file systems?
Has anyone tried backing up mounted ZFS snapshots?
David Strom

[email protected] wrote:
Specifically I am looking at being able to break the pool up in to various daily backups, but I noticed naming a filesystem doesn't back up the filesystems beneath it. (ie, /zpool/home doesn't mean /zpool/home/group2/bob gets backed up)
Is there a good strategy for backing up snapshots instead of the live filesystem?I think your only choices are to either use 'all' and let the client gather all the live filesystems, or name what you want to gather explicitly. There's not really any other choices. (This is a problem for some Networker admins even without having ZFS involved).
One option is to have a script maintain the save set list. At least then you don't have to do it by hand. You could make it smart enough to add in new filesystems, and you could easily have it reference snapshots instead of the live filesystem.
Darren

ICS 2.x: Instructions for using Solstice/Legato Networker to back up iPlanet Calendar Server

Instructions for using Solstice/Legato Networker to back up iPlanet Calendar
Server

The following discussion expands upon the instructions for using the
Solstice/Legato client software to back up Calendar Server in the iPlanet
Calendar Server: Administration Guide. You can find this documentation at
the following URL: 

http://docs.iplanet.com/docs/manuals/calendar/ics21/ag/calagadm.htm#1064539

If the Solstice/Legato Networker is installed under the default directory (as
per the recommended installation procedures), there should be three files
dedicated to Solstice/Legato Networker. 

<OL>
<LI>icsasm
<LI>legbackup.sh
<LI>legrestore.sh
</OL>

To initiate the Networker backup directory image, use the command 

csbackup -l

This command creates a directory named "
backup/" in the bin
directory and corresponds to Step 1
under the procedure for Backing Up Calendar Server Data in the
iPlanet Calendar Server Documentation.

After you have initiated the directory image, you can use the following commands
to back up or restore 1) a Calendar database, 2) a specific user's default
calendar, or 3) a specific calendar. The following commands assume that the Networker
client software is installed under the /usr/bin/nsr
directory and the iCS 2.x server is
installed under the /opt
directory.

1) Calendar Database
? To back up a database: 

/usr/bin/nsr/save -s legato server host/opt/SUNWicsrv/cal/bin/backup
? To restore a database: 

/usr/bin/nsr/recover -a -f -s legato server host
/opt/SUNWicsrv/cal/bin/backup
 

2) User's Default Calendar
? To back up a user's default calendar: 

/usr/bin/nsr/save -s legato server host
/opt/SUNWicsrv/cal/bin/backup/userid
? To restore a user's default calendar: 

/usr/bin/nsr/recover -a -f -s legato server host
/opt/SUNWicsrv/cal/bin/backup/userid 

3) Specific Calendar
? To backup a specific calendar: 

/usr/bin/nsr/save -s legato server host
/opt/SUNWicsrv/cal/bin/backup/userid calid
? To restore a specific calendar: 

/usr/bin/nsr/recover -a -f -s legato server host
/opt/SUNWicsrv/cal/bin/backup/userid calid

You can also use the Networker graphical user interface to schedule backups.
For example, you could set up a client saveset to back up
/opt/SUNWicsrv/cal/bin/backup
periodically.

For more information regarding Solstice/Legato Networker software, please
see the Sun documentation at 

http://www.sun.com/storage/software/backup.html 

Also see technote 4311, "iCS 2.x: What is the difference between
csbackup/csrestore and the Solstice/Legato Networker functionality?," at 

Hi,
Check below link:
http://help.sap.com/saphelp_nwpi711/helpdata/en/f2/31ad41810c11d288ec0000e8200722/content.htm
Thanks
Sunny

Primary RAC database hung on sqlplus as sysdba, dgmgrl and rman target

I need urgent help here, our qa environment is two nodes RAC primary, and two nodes standby.
Standby environment is ok, so far works, but no entries added to alert log.
however on primary rac, i cannot sqlplus to the db, and rman target hung, and dgmgrl hung.
I tried to srvctl stop database -o abort, it just hung there.
please help me to get that resolved.
Thanks in advance.

982335 wrote:
I need urgent help here, our qa environment is two nodes RAC primary, and two nodes standby.
Standby environment is ok, so far works, but no entries added to alert log.
however on primary rac, i cannot sqlplus to the db, and rman target hung, and dgmgrl hung.
I tried to srvctl stop database -o abort, it just hung there.
please help me to get that resolved.
Thanks in advance.check the primary alert log for error and paste here.
also do network connectivity test....e.g
lsnrctl status
from a client system do:
ping primary_ip
tnsping primary_tns
always make sure Abort and killing OS process is your last option!
Tobi

How to connect an apple tv to an enterprise network with a username and a password? I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

How to connect an apple tv to an enterprise network with a username and a password?
I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

Contact the University's IT dept, they may be able to set something up on the network to allow the ATV to connect without the need for a user name/password.

Every Time that I try ot download my songs that I have purchased from Itunes and error message come up, "error 450." Make sure that your network connection is open and try again. What can I do to fix this problem?

Every time that I try to download my music from I tunes an error message comes up it says, ( err = 450) Make sure that your network connetion is active and try again. What can I do to fix this problem, I have tried everthing that I-tunes has told me but with no luck. Thanks

Try disabling your parental controls. Does that help with the 450?
iTunes: Using Parental Controls

Make sure your network settings are correct and your network connection is active, or try again later; Have been trying to fix for ages.

Hi Everyone, been struggling all day to restore my settings on my ipod, as my little brother has put a restriction password in place and made me not able to get into Safari, iTunes, Camera which I really need. I have tried everything, resetting my proxy settings, turning off the firewall, changing my network location, ran diagnostics. Everything seems fine on that, I post below my results. I also tried restoring from the device, but with the restrictions code in place I can not do so. And everytime I am dowloading the software update before the restore it comes up with 'Make sure your network settings are correct and your network connection is active, or try again later'. I have been using google for ages and am not sure what I have missed.
I am using Windows 7 with an Acer Notebook.
DIAGNOSTICS:
Microsoft Windows 7 Enterprise Edition Service Pack 1 (Build 7601)
Acer Aspire One 753
iTunes 11.0.2.26
QuickTime 7.7.3
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00BCBEE0093E4EF0
Current user is not an administrator.
The current local date and time is 2013-04-05 19:32:36.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:     {E1CB97AA-CDFF-4C43-8F63-658D7E70A39F}
Description:     Intel(R) Centrino(R) Advanced-N 6205
IP Address:     172.16.42.14
Subnet Mask:     255.255.255.0
Default Gateway:     172.16.42.1
DHCP Enabled:     Yes
DHCP Server:     172.16.42.1
Lease Obtained:     Fri Apr 05 19:01:59 2013
Lease Expires:     Fri Apr 05 20:01:59 2013
DNS Servers:     172.16.42.1
Adapter Name:     {44D6CC7B-1F1E-4F26-BBB8-18F98A868E2B}
Description:     Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
IP Address:     0.0.0.0
Subnet Mask:     0.0.0.0
Default Gateway:     0.0.0.0
DHCP Enabled:     Yes
DHCP Server:
Lease Obtained:     Thu Jan 01 11:00:00 1970
Lease Expires:     Thu Jan 01 11:00:00 1970
DNS Servers:
Active Connection:     LAN Connection
Connected:     Yes
Online:          Yes
Using Modem:     No
Using LAN:     Yes
Using Proxy:     No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-02-14 17:34:33.
**** Device Connectivity Tests ****
iPodService 11.0.2.26 is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
Daniel Pugh's Ipod, iPod touch (4th generation) running firmware version 6.1.3
Serial Number:     C3XDN3C5DCP7
Most Recent Devices Not Currently Connected:
iPhone 4S running firmware version 5.0.1
Serial Number:     C38GKQWZDT9Y
**** Device Sync Tests ****
Sync tests completed successfully.
Kindest Regards
Daniel (Puggy858)

Hi Diesel vdub,
Did that and I tried again, download stops halfway through and comes up with same message I have already quoted. Wifi Signal is 5/5, network is working, just not letting me download via iTunes.

HT4352 I installed itunes on Pc windows7 and on same network of Apple tv and enter same apple id but i dont see computer on apple tv

I installed itunes on Pc windows7 and on same network of Apple tv and enter same apple id but i dont see computer on apple tv

I did that and I have the device appearing in my Apple ID on the computer but Apple Tv don't see the computer I don't know why

My iPhone 4s cannot join a public unsecured network but my iPad and macbook can. I have reset the network settings twice. Both times it worked, but only for a few minutes. What can I do?

My iphone 4s cannot join a public unsecured network, but my ipad and macbook can with no problems. I have reset the network settings on the iphone twice. Both times that fixed the problem but only for a few minutes, then I get the "cannot join network" message again. Please help! What can I do?

Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.

Legato networker 6.1.1 and rman

Similar Messages

Maybe you are looking for