Legato Storage Manager question
Hi,
i want to ask whether the LSM is a separate
component outside the o8i server ??
If so , where can i get the price info.
If it is included in o8i server, how can i install it ???
Thanks
Stephen
Stephen,
You have two options:
1) If Legato is not installed on you machine,
then Oracle installer install LSM - limited version of Legato Networker. It is limited to 4 channels, requires tape drive to be directly connected to your machine, does not support autochangers (jukeboxes), etc.
It is included in Oracle installation,
you don't need a separate license.
2) You can buy 2 products from Legato - Legato Networker and Legato Module for Oracle. Install Legato client first, then Oracle - Oracle installer detects that legato is already installed and does not attempt to install it again. Then link Oracle and Legato.
For pricing contact Legato www.legato.com
Regards,
Sev
[email protected]
null
Similar Messages
-
Rman backup to tape (legato storage manager)
hi
currently i am try to use direct backup of my database to tape by rman.
but rman can't directly move oracle data into tape
it require 3rd party tool like
legato storage manager.
so my question is
1.how we can install LSM.
2.Is it avaliable on oracle rel 2 cd or not.
3.how we can config it.
4.any other tool is avaliable for this(for backup ->tape)
kuljeet pal singhHemant.....
According to the link which you have provided explains that
there must be a file libobk.so, ext might differ, but in my sun box there is no such file and
$ ls libo*
libocci.so libocijdbcst9.a libolapapi9.so libordim9.so
libocci.so.9.0 libocr.so liboraawt.so libordimt9.a
libocci9.a libocrbackend.so liboraioser.so libordsdo9.a
libocijdbc9.so libodm9.so liboraolap9.a libowm2.so
libocijdbc9_g.so libodmd9.so libordim9.a
$another thing is that
what is NSR_GROUP,NSR_SERVER >
$ echo $NSR_SERVER
$ echo $NSR_GROUP
it is not dispalying anything in the oracle env -
Legato Storage Manager problem
Hi,
I do very well backup of a database on tapes using Legato Storage Manager and RMAN. I use 4 tapes on 40 G. Tha backup use 35G from each tape. In Legato Storage Manager at the Media, then Devices, then Media Type is selected dlt. I can select dlt or dlt7000 or other option.
I want to use few tapes so I want to do backup using tapes HP DLT 80G. The backup bahaves like in the previous case, after 35 G of backup requests a new tape even the tape has 80 G.
Do you know what I need to select at the option Media Type in Legato Storage Manager ? or how to do to use tapes of 80 G?
Thank you,
MihaelaStephen,
You have two options:
1) If Legato is not installed on you machine,
then Oracle installer install LSM - limited version of Legato Networker. It is limited to 4 channels, requires tape drive to be directly connected to your machine, does not support autochangers (jukeboxes), etc.
It is included in Oracle installation,
you don't need a separate license.
2) You can buy 2 products from Legato - Legato Networker and Legato Module for Oracle. Install Legato client first, then Oracle - Oracle installer detects that legato is already installed and does not attempt to install it again. Then link Oracle and Legato.
For pricing contact Legato www.legato.com
Regards,
Sev
[email protected]
null -
Problems installing/configuration Legato Storage Manager / 8i
I have installed Oracle 8i (8.1.7) on a Windows NT 4.0 EE platform.
For backups we use OEM and LSM.
When I insert a tape to backup my database, LSM will put this backup after the backup which is allready on tape.
For the backup we use 5 tapes (mo, tu, we, th, sa).
The tapes will rotate every week.
How can I make LSM to start the backup at the begin of the tape and not after the backup of the week before.
I think that's a very simple parameter within Legato, but which one??
If you have the solution, please let me know.Thanks,but we solved it..JBoss ,running as a service on Windows 2003 server, tried to log on (with the credentials of the one that installed Office) but the service didn't have the right to do it..So it failed to start..If you change the rights for services from secpol.msc everything goes well..
Katerina -
Where can i get a trial version of Legato Storage Manager
Hi Oracle expert,
We like to evaluate LSM suggested in Rman document. Is it included in Oracle9i CD for development? If not, where can we get a trial version of it?
Regards
Mark
2004/09/14You need to be a partner or you will have to get it from a partner.
Also if your already a customer you may get it from the customer service market place.
You dont have to have access to the service market place in order to have access to the SDN forums.
Please contact your nearest SAP partner or drop an email/webmail to SAP in the address I gave you before so that I partner can contact you.
Regards,
WB -
Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanksDid you tap "Show older backups" on the Choose Backup screen (see image below)?
-
Oracle Suggested Backup, to tape only - Tivoli Storage Manager
I´ve been asked to cancel future backups to disk and to setup oracle´s suggested backup to the tape device only (which underwater is the tdpo from Tivoli´s storage manager).
This way the expensive disks can be freed from recovery data.
I´ve had my share of problems with the tdpo, but besides the problem of this gateway driver between RMAN and TSM I would like to know if this is best for the whole suggested backup strategy.
Somehow I´m not convinced in backing up to "tape" devices only; for it is slower than local disks, and because we had problems before with the driver, but there may be a lot more reasosn why I should or should not accept this desired goal to be best for our company.
I hope some of you can help me straighten my vision on this.
RobinThe biggest problems I think we might face are the
big question "who is responsible for what", and the
administration of non Oracle systems/methods to
perform backupsi have no problems with such a setup. i provide the rman skript which will be called by TSM.
the TSM admins notify me if the backup failed. retention on TSM side is disabled, only RMAN deletes obsolete/expired backups.
All I want to care about is performing a backup to
Disk, or Disk and Tape, or just Tape from within
Oracle/RMAN and read the ouput from here.
Now where these external tape labraries like TSM come
in there will be more administration for the total
handling of a backup job. It´s not only RMAN, but a
tdpo and a TSM server which need to be monitored
closely. of course TSM has to be monitored but if you already have invested an infrastructure you should use it for every type of backups.
Sadly Oracle has yet to come up with it´s secure
backup for TSM systems, but I think it would be best
if I could let Oracle solely in charge of its own
backups.if TSM retention is disabled, RMAN has absolute control.
Then again, I don´t know if anyone has good
experiences with TSM as the only backup provider for
Oracle backups. (so no disk backups)it works very good. use staged pools on TSM. primary pool should be diskpool, secondary a tapepool. you can configure TSM to move the data from disk to tape based on fill level or age.
regards,
-ap -
Hello,
I have got one question about BIA architecture, because I can't find any information about the "Storage Management Server" in connection with BIA
What is the "Storage Management Server" and is this constrainly necessary (or is it part of the EVA)?
Thanks in advance.
SabrinaGood document, however for a short answer all this server is is a smal DL 380 server with a special version of W2K3 that runs special software to manage the little eva that ships with your BIA. This server does nothing else. A waste of a machine if you ask me as you could run the software on an existing server, but it is required by HP so you have no choice but to get it (it should be included as part of the overall pricing). If nothing else you could use to store your MP3 files as well as manage your EVA
-
HP Storage Management Pack Conflicts with Network Monitoring SNMP
The HP Storage management pack that I installed requires starting the Windows SNMP services, which creates a conflict with SNMP used for SCOM network monitoring. I am spinning up a second SCOM mangement server so I can split these functions. What would
you recommend to split these functions across the two management servers? Uninstall the HP Storage Management Pack, and install on the new server? Or move the network monitoring to the second server?
Thank you for your help!Does the HP Storage pack support resource pools? What I've found with these 3rd party packs that implement connector services is they do not provide true HA via SCOM resource pools - they are standalone systems with a connector service. This is true for
the NetApp (DataONTAP) pack, and it's a huge disappointment.
Vendors do this because they have an API, and they think the only way to implement discovery and monitoring in SCOM is to create a service that accesses the API - and then the service is basically a collector in this case, and typically has a handful of
rules (sometimes just one rule) that scrape events on the management server and they are misinterpreted to be alerts coming from some instance.
I turn green when I run into this type of problem, because all this can be accomplished with native modules or managed code that are designed to work very well with SCOM.
I know this doesn't answer your question - it's more a way for me to express my distain for these type of packs.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com) -
About DB2 Automatic Storage Management
Does it mean that DB2 will create/resize containers of table spaces automatically if we use Automatic Storage Management to manage?
If yes, when DB2 will create new container within a table space?
If yes, when DB2 will resize containers within a table space?
Please advise. thanks so much.
JamesThanks for you reply, I still have some questions.
Q1: When the size of table space need to be increased, by default, which one will occur, (1)DB2 will increase the size of existing container, or (2)add new container?
Q2: When DB2 add new container, whether the new container is added as new stripe set, or added as existing stripe set. I think it should be new stripe set since it can avoid rebalance.
Q3: What's the threshold to trigger size increasing? Can we configure it?
Thanks so much
James -
my app store wont let me update any apps when i click the update all button it doesnt do anything and eventually says i need to manage my storage, i have 4.4 gigs left and all of my icloud storage left and i just deleted 5 app hoping it would make room but it didnt work. is there something that happened to itouch 3rd gen during th ios5 update or something? please let me know if there is anything i can do
it says something about storage management
Try these support articles...
iCloud: Managing your iCloud storage
iCloud: Purchasing iCloud Storage and Billing -
Intel Matrix Storage Manager disables Windows Update and Windows Validation on Windows 7 64-bit
I have a Lenovo ThinkPad R61 8918CTO on which I did a clean install of Windows 7 Ultimate SP1 (64-bit) on a new Seagate Momentus XT 750GB drive. The installation was trouble-free, as were all of the post-install Windows Updates.
Then I installed ThinkVantage System Update 4.03 and used it to install most of the available Lenovo updates. Big mistake. I'll spare you a detailed account of the hours I wasted troubleshooting, rolling back to previous restore points, and doing more troubleshooting, but it turns out that installing Intel Matrix Storage Manager driver v. 8.9.2.1002 caused Windows Update and Windows Validation to fail.
Symptoms: Windows Update control panel can't check for updates and reports that the Windows Update service isn't running when it actually is. Online Windows Validation fails and the standalone Windows Validation utility won't install. Microsoft programs that require a validated copy of Windows (e.g., Microsoft Security Essentials) won't install.
Solution: Roll back the driver for the relevant SATA controller to the previous driver.
I've reinstalled ThinkVantage System Update 4.03 and hidden the proposed Intel Matrix Storage Manager update; since then, I've used it to complete my Lenovo updates without issue.
I hope this post will help other people with this problem find the solution a lot faster than it took me!This happened after installing a new advanced format drive with 4k-byte sectors, I'd guess. If the storage driver doesn't report the physical sector size to Windows, update fails.
I just ran across this myself (again) putting Win 7 on a T400.
I don't know why this is still going on. It may be that the update lists for older machines still have pre-AF-drive drivers listed.
FYI, another fix is going to the Intel site and installing the latest Matrix Storage Manager AHCI driver. This may be more desirable than rolling back to an older driver in some cases.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
P55-CD53, how to install SATA AHCI drivers and Matrix Storage Manager?
Please excuse my noobness as this is for my first PC build and much of it is Greek to me, but could someone please inform/educate me as to what the following drivers (link) are for and which need to be installed after a fresh installation of Windows 7 Pro x64? Do I need to install all of them because some of these appear to be redundant, just from different manufacturers, or am I mistaken? I have a single 500GB HDD but will probably add more down the road.
JMicron JMB36x IDE Drivers (including floppy driver)
Description XP/Vista/Win7 Ver: 17.49.04.WHQL
Update Date 2009-07-27
Your System OS XP/Vista/Win7 32/64bit
(3989KB)
Intel P55 AHCI / RAID Drivers
Description Ver: 8.9.0.1023
Update Date 2009-07-24
Your System OS XP/Vista/Win7 32/64bit
(23048KB)
Intel P55 SATA RAID Driver (For floppy driver)
Description Intel P55 SATA RAID driver
1. Extract the file and Copy all files to the floppy.
2. Press F6 to install driver through the floppy when booting and loading RAID function.
Update Date 2009-07-24
Your System OS XP/Vista/Win7 32/64bit
(443KB)
JMicron IDE/SATA RAID Drivers (with AP)
Description XP/Vista Driver Version: 1.17.43.05
For floppy install:
Please copy all the directories and files in the "floppy" folder to the root directory of a floppy disk to create a pre-install disk for Win2K/WinXP/Win2003/WinXP 64bits/Win2003 64bits.
For example,
A:\amd64
\x32
txtsetup.oem
To enhance IDE transfer speed, we strongly recommend you install JMicron IDE/SATA Driver.
Update Date 2009-02-23
Your System OS Windows Vista 32/64bit
(4032KB)
Windows XP 32bit
(4032KB)
Intel TPM Device Driver
Description Intel Trusted Platform chipset driver
XP/Vista/Win7: 2.00.0000.00
Update Date 2007-11-02
Your System OS Vista/Win7 32/64bit
(23KB)
Windows XP 32bit
(23KB)
On a side note, I have already flashed the BIOS to 1.4 using the Forum USB Flashing Tool (thanks!).Thanks.
After booting from the Windows 7 disc, I selected Repair Windows, Load Drivers. Which specific controllers do I need to install for the P55-CD53 MB since there are multiple controllers listed for each of the four SATA compressed files?
Considering the multiple files and multiple controllers, is there no one out there with a P55-CD53 that has AHCI mode enabled that can give dumbed down instructions on how to do so?
The manual states "Select the appropriate RAID controller and press enter." Well... which one is the appropriate controller? Am I suppose to load the driver for all the AHCI controllers if that's even possible?
For the Intel P55 AHCI / RAID Drivers compressed file, these are the controllers available within F6flpy64\iaAHCI.inf:
Intel(R) ESB2 SATA AHCI Controller
Intel(R) ICH 10D/DO SATA AHCI Controller
Intel(R) ICH10R SATA AHCI Controller
Intel(R) ICH7M/MDH SATA AHCI Controller
Intel(R) ICH7R/DH SATA AHCI Controller
Intel(R) ICH8M-E/M SATA AHCI Controller
Intel(R) ICH8R/DH/DO SATA AHCI Controller
Intel(R) ICH9M-E/M SATA AHCI Controller
Intel(R) ICH9R/DO/DH SATA AHCI Controller
Intel(R) PCH SATA AHCI Controller
Intel(R) PCHM SATA AHCI Controller 4 Port
Intel(R) PCHM SATA AHCI Controller 6 Port
Also, regarding the dual BIOS controls for SATA/IDE/RAID settings previously mentioned, I believe SATA ports 1-6 are controlled via Intel and 7,8 are controlled via Jmicron. Considering my HDD is currently plugged into SATA 1, Jmicron probably isn't necessary for the moment.
Edit:
Turns out that none of the drivers for the controllers listed in iaAHCI.inf could be installed. However, I went ahead and installed the drivers listed for all the controllers in iaStor.inf. I reinstalled Windows 7 to get rid of the BSOD. I then installed the chipset drivers and Intel Matrix Storage Manager. -
It is not possible to install LenovoEMC Storage Manager for Linux on Ubuntu 14.10
hi,
I have big problem installing LenovoEMC Storage Manager for Linux on Ubuntu 14.10 64bit.
I downloaded it from https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/26108
Installed JRE (both 64 and 32 bit)
Selection Path Priority Status
0 /usr/lib/jvm/java-8-oracle/jre/bin/java 1 auto mode
* 1 /usr/lib/jvm/java-8-oracle/jre/bin/java 1 manual mode
2 /usr/local/java/jre1.8.0_25/bin/java 1 manual mode
java -version
java version "1.8.0_25"
Java(TM) SE Runtime Environment (build 1.8.0_25-b17)
Java HotSpot(TM) 64-Bit Server VM (build 25.25-b02, mixed mode)
tryed with both. but without success.
I am still getting error:
./setup-1.4.4.14439.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Graphical installers are not supported by the VM. The console mode will be used instead...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
1- Deutsch
->2- English
3- Español
4- Français
5- Italiano
6- Nederlands
7- Português (Brasil)
8- Svenska
CHOOSE LOCALE BY NUMBER: 2
=======================================================
Installer User Interface Mode Not Supported
The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
=======================================================
Any help?
Thanks!
Solved!
Go to Solution.Ok , i got this baby working.. sudo is not a problem here.. you need to specify additional java parameter for installer!
./setup-1.4.4.14439.bin LAX_VM /usr/bin/java -
Unable to start Storage Manager Engine on OES2SP3
Hi,
I just installed Storage Manager on a OES2SP3 x64 server and after what seems to be a correct installation, the Engine doesn't start.
Does anyone if is there any undocumented dependency or something I should know to be able to start it?
I've been also looking for some log file, but it seems that "/etc/init.d/nsmengined start" doesn leave any log.
Any idea?
Regards
Jose LuisJose Luis,
Are you running anything else on the server that uses port 3009? Port
conflict is one reason for the NSM Engine to shut itself down.
Please send an email to storagemanager-at-novell.com so we can help you
sort out this issue.
thanks,
NSM Development
On 8/9/2011 1:06 PM, jlrodriguez wrote:
>
> Hi,
>
> I just installed Storage Manager on a OES2SP3 x64 server and after what
> seems to be a correct installation, the Engine doesn't start.
>
> Does anyone if is there any undocumented dependency or something I
> should know to be able to start it?
>
> I've been also looking for some log file, but it seems that
> "/etc/init.d/nsmengined start" doesn leave any log.
>
> Any idea?
>
> Regards
> Jose Luis
>
>
Maybe you are looking for
-
I can not find Turbo Tax files on my Mac
My files have disappeared:( I am trying to do my taxes on my IMac, as I did last year, but all the Data files have misteriously disappeared. I have performed several spotlight searches. I have searched for files ending .tax, I have searched my appl
-
Why aren't all of my iPhone 6 contacts automatically on my Macbook Pro?
My iPhone 6 is backed up to iCloud, however, even though my mid 2014 Macbook Pro (running Yosemite) is logged in to iCloud, only a small portion of my iPhone's contacts are present. Note- 1. All updates are installed on both devices. 2. I double-chec
-
Bought 3 Month Subscription Before Knowing I Also ...
Hi, I bought a 3 month subscription to make US Calls using Skype before I knew you needed to also buy a number to receive calls. So, I decided to buy a number too but that also comes with a 3 month (forced) subscription...I paid for both now...does
-
When I open Firefox I get the Application Error message "The instruction at "0x00000000" reference memory at "0x00000000". The memory could not be "read". Click on OK to terminate the program" Firefox does then open but parts of sites are missing suc
-
Play/Pause controls not working properly after IOS 8
I like streaming content off of a website I visit in safari. Before the update, I was able to play/pause the content from the lockscreen, I was also able to do it using my apple earpods. Now this feature doesn't want to work properly. It will work