Legend text in webi charts

Dear Friends,
i created on tabular report in webi. i have 2 key figure in that report.
now i convert that tabular display into Bar Chart.
i set to on legend display property.
Now i cons of legend are comming but name of key figures as text is not comming with
legend symbols.
Can you please help me to solve it.
Regards
malik

Only Top:2. Correct??
Your prev post told, top 2, so suggested like that.
Here you go Malik.
Create a Rank variable (BO)
Rank: =Rank(Sales Revenue) -- I'm pointing to eFashion universe
Now you have your table, ready.
Now apply Rank for Top:2
It listed top 2 sold items, correct.
>> Now in Reporting bar , you can see show/hide filter pane (left most one)
>> Click on it
>> Drag Rank variable
>> By default it will show Constant, in text box enter :2
>> OK
here you go, with only Top2(second ranked) sales details, turn it to Chart.
Note: If you do this, then it will be applicable for entire tab/report.
Hope it will suffice, will come up with new findings on this
I'm Back

Similar Messages

  • Chart Legend, Text Change (Batch)

    Hi,
    I have about 40 reports all with the same charts, and the legend label uses the field labels so they look like "count of open accounts to date."  While I can change the text names when I select the legend text in the Preview pane, it is only a band-aid fix because I don't want to have to manually change this text for all 40 of my reports.  It'll add up to over 200 manual text edits!!
    Please tell me there is a better way!!
    I have CRXI
    Thank You,
    Frank

    Hi Frank
    Take a look here: @ Symbol in formula name when using formula for report chart data
    I think this thread can help you.
    Regards
    Fabio

  • LIne up Legend entries with stacked chart

    I have an appliction where on the front panel I need to display anywhere from 1 to 16 channels in a stacked waveform plot.  for ease of viewing, I would like the entries in the plot legend to line up with their respective channels in the graphs, similar to the rather crude picture i'm attaching.  The hangup in this is I need to be able to vary the number of charts displayed, 16 max, during runtime.
    In my mind, one option is to go with subpanels and have a panel setup for each number of channels i wish to display.  However, I think this would be easier if it were supported by the Waveform Chart itself.  I'm open to any and all suggestions.  Thanks!!!

    If your plot areas are that narrow you can resize the default plot legend text size to meet the size of one plot window. Like this:
    The number of plot legend lines shown can be adjusted by using Create -> Property Node -> Legend -> Number of Rows.
    Also you can select which plot will be visible/invisible in any given time by using Property Node -> Active Plot and Property Node -> Plot -> Visible combination. 
    Message Edited by Giedrius.S on 02-15-2010 06:40 PM
    Message Edited by Giedrius.S on 02-15-2010 06:45 PM
    While evaluating my code please have in mind that I am a LV novice. Therefore sometimes my code might violate some coding rules that I have to learn about myself. But how else could I do that...
    Chart zoom with "Mouse Over" effect

  • How to change legend name in Web-I line graph

    Hi,
    Please help me on this. My Web-I line graph displays the legend same with the universe measure name that I have used. Is there a way to rename the legend.
    Thank you in advance.
    Rose

    Hi Rosemarie,
    There is no functionality of editing the legend text of a graph in a Webintelligence report
    Enhancement Request ADAPT00787806 has been created.
    If you are more concerned about the Legend title and not the Measure name then you can store  the measure values in Measure Variable and give the variable name you want your legend title should be.
    Only take dimensions and newly created variable on the report where variable will act as measure.
    I Hope  this Helpsu2026
    Thanksu2026
    Pratik

  • Customizing legend text

    Hi!
    I've developed a graph in jdev by:
    1. Creating a stub for some web service.
    2. Creating a data control of the stub.
    3. Dragging the data control into a jsp page as a graph.
    4. Setting up the graph to show the correct data.
    Now I want change the legend text, since it shows the attribute name of the Java object, which is rather ugly. Can anyone tell me how to customize the legend text or point me to some relevant documentation?
    I'm using:
    BI Beans Graph version [3.2.1.0.13]
    JDev 10.1.2.1.0

    Hi Sergio
    No formatting is not the problem.
    After validating my input fields i get the error message: "2 errors occured" as notification above the navigation bar
    below both input fields i get my own field error texts in german.
    Now i want to have the text "2 errors occured" in german too
    thanks,
    Jochen

  • Legend Text Wrapping

    Is it possible to wrap the legend text for a combination chart? I am placing the legend at the bottom of the chart and have long series names that scroll out of the object box.

    My current problem is similar to what was raised by Chris in September.
    I report mass of data in the same stacked chart with different number of responses. The Legend, which was placed on the top of the chart appears always in one row regardless of 2 or 10 items (responses) are shown. In many cases the Legend line/band runs out of the object.
    Line break on items does not help as they just break one item but not the full legend "band" into two lines. I supposed it will wrap automatically but it does not do so.
    Do you have any idea / solution / tip for me?
    It would be highly appreciated!
    (I am on Engage 2008)
    Cheers, Peter

  • SAP BO ,WEBI Charts: Want to display top 10 departments

    Hi Guys.
    I am new to webi charts,
    In Webi charts, I want to display the top 10 departments who are spending more in printing with amount, if possible year wise.
    But the chart which i created it is not looking relevant and very confusing.
    And in Legend it is displaying all the departments and that to it is not fitting in one page,
    So i am thinking to display only top 10 departments, Can you help me.
    we are using 3 version

    You can do this with the Ranking function of Webi.
    Select the chart, then select the Rank icon in the toolbar, and add the rank. For example, you'd select the top 10, based on a measure of amount, for the dimension of year.
    Hope that helps.

  • Need Help formatting text in a chart in Keynote

    I'm attempting to edit/format some of the text in a chart. This is an imported Powerpoint presentation
    so I'm limited to using the fonts available on the originators PC.
    On the chart is a legend, showing little coloured boxes which reference the coloured elements in the chart. The text beside these is too long, and the text box runs off the page. I know I can go to the inspector and change some parameters (ie horizontal spacing) but I really need to break the text into two (or more) lines. However, I cannot find a means to enable text wrap. I have tried to create an invisible additional column (Chart/edit data) but I cannot hide the box.
    Any suggestions would be appreciated

    You can add a line break in the Chart Data Editor cells by typing Option-Return at the point you want the break. This will let you have legends with text that runs two or more lines.

  • Contol of Legend colours across multiple charts

    Post Author: Linda
    CA Forum: WebIntelligence Reporting
    I have created a number of pie charts based on the same data but each with only a subset of the data. The range of results may differ across the charts. I need to have the segments coloured consistently by the value of the legend i.e. :
    chart 1 only has values for status of Failed
    chart 2 has values for all possible status i.e. Failed, No run & Passed
    chart 3 only has values for status of Passed
    I can control the colour pallette which is used by each chart but need help on establishing a link to the values returned. I want the same colour scheme displayed for each chart e.g. Failed is always red, Passed is always Green, etc. However when data does not exist for a specific value I don't get consitency i.e. in the example above using the same colour pallette, the Failed for chart one and the Passed for chart three would both use the first colour in the pallette in this case would both be green which does not convey the right message.

    Post Author: jsanzone
    CA Forum: WebIntelligence Reporting
    Linda,
    You've hit upon a very troubling aspect of working with WebI in that columns that don't accumulate at different aggregations are "dropped".  I have encountered the same situation and wound up having to build a custom SQL to ensure that all columns are always populated with at least of value of zero in order for them to remain constant in the report.  I think what we all want everytime is a Chi Square (gives a distrubtion of our data regardless of "dropouts"), but what we get is a plain old dataset.  If you want more info on how to build the custom SQL post back here please.

  • Display column values as a series/legend on a line chart where one column value can be more than one category

    Hi Everyone
    I don't know if this is possible or not, so I will describe it. I have a column in a table called Filing. There are currently three values in it ("Abuse", "Neglect", "Voluntary") and each record has this populated. I also have
    the below slicer for the column also.
    I would like to add a fourth value called "Abuse/Neglect" that would identify instances where both an Abuse and Neglect petition was filed, which is a subset of the Abuse and Neglect records in the Filing column.
    My question is, is it possible to create a line chart that has the 4 Filing possibilities: "Abuse", "Neglect", "Voluntary", "Abuse/Neglect" as the Series/Legend in the line chart?
    The problem is that there are records that are more than one category: Abuse or Neglect records can also be Abuse/Neglect.
    Paul

    Hi Paul,
    According to your description, there is a column with the values ("Abuse", "Neglect", "Voluntary") in your table, now what you need to is that add another value "Abuse/Neglect" in this column, and then use it
    as Series/Legend in the line chart, right?
    In this case, you can add calculated column to your table based on your logic. A calculated column is a column that you add to an existing PowerPivot table. Instead of pasting or importing values in the column, you create a DAX formula that defines
    the column values. The calculated column can be used in a PivotTable, PivotChart, or Power View report as you would any other data column. Please refer to the link below to see the details.
    https://msdn.microsoft.com/en-us/library/gg413492%28v=sql.110%29.aspx?f=255&MSPPError=-2147217396
    Regards,
    Charlie Liao
    TechNet Community Support

  • Need to display TEXT in web selection screen

    HI All,
    We are working on CRM-BW  modeling. We have one field called "product" which will have key and medium text. We need to display both key + text in web reporting selection screen. When we ran first time text was not showing in web report. Then we found and change the configuration in search help in SE11 for that field. Then we can see the text+key combination in RSRT but still we can't see the text in web report selection screen...
    Now what we have to do to display text in selection screen on web...
    Please give your inputs  ASAP.....we are in UAT phase....
    Thanks in advance
    Arun

    Hi Arun,
    For you case: Display key & text in selection screen.
    In BW,
    You can go to query designer, then you'll go to the info-object belong to the variable (selection-screen : product). Right-click, find for the properties, Then you'll see the option for <b>display as</b>.
    Choose it for Key and text.
    Then save it.
    Go to the report, in the selection screen, when you're choosing for the help, you'll see the value displayed by key & text.
    Hopefully it can help you a lot.
    Regards,
    Niel
    Thanks a lot for any points you choose to assign.

  • How to create a OTR Text in Web Dynpro ?

    Hi All,
    Please help, How to create a OTR Text in Web Dynpro ?
    Urgent.
    Thanks in advance.
    Kaleem.

    Hi Kaleemullah,
    To create OTR Text, T-Code is SOTR_EDIT. If you run this transaction then one screen will appear. There you can choose Long Text or Short Text based on your
    Text. You can choose language also. In Text field you can enter your text. You can put WDYV in your Object Type field. In Text block Length can be increased to 25 as it may be problem if language conversion of Text happens. You must fill your package field and save the OTR.
    I hope you can be able to create OTR Text now.
    Best Regards,
    bansidhar

  • Legend not appearing for Chart Type columns/bars in business graphics

    Hi Experts,
    I'm not able to make the legend appear in web dynpro screen.As such graphs is coming but the legends are not appearing at runtime. When i customize the graph using t-code 'BS_ANLY_CD'  or right-click on business graphics, the legends are appearing in customizing preview but not in runtime.
    Could anybody help me out in this issue?
    Below is the screenshot of the same.
    Thanks in advance.
    Regards,
    Bob.

    Its solved .Solution is below.
    You just need to add the label description for both the series then the legend will automatically come as shown below.

  • Link from WEBI chart to WEBI report

    All, how can I link a WEBI chart (column) chart to an detail WEBI report. Appreciate any inputs.
    Thanks,
    Ann

    Hi Ann,
    You can use the chart bars as reportfilter (much like the dropdown box filter effect),
    It is actually implemented as an input control, so you can control a detail table below the chart by clicking on a chart bar.
    However hyperlink from the table is not possible in BI40 (yet).
    (Right click the table, Linking, Add element link).
    So you either have to use the data in the same report option, or use the hyperlink option from a table cell...
    (Right click the cell, Linking, Add hyperlink).
    As I noticed you are using BICS, before jumping to using dashboards (FKA excelsius), be aware that the BICS connectivity in there is still the version running on BW, so unlike a WebI report, you have to publish the dashboard in BW and access it via an SAP portal environment, you cannot run it directly from within BI launchpad (in BI41 this will change). So to link from the portal environment to the BI launchpad for the WebI document you would need some portal integration work too.
    Hope this helps,
    Marianne

  • Text ids for Chart of Accounts & Co Code Area

    Hi,
    Why do we need obt6 & obt7 i.e. Text ids for Chart of Accounts & Co Code Area.
    Regards,
    Vikas

    in case when u want to use some additional text for the creation of GL at a crertain level like COA then u create the standard text types and tick the relevant text... then whenever u create the GL then it will give u the option of putting text there..... it is more of information text....

Maybe you are looking for