Lela 3.1 and wrt54gs

I have a WRT54GS v6 firmware v1.52.2 running Vista Ultimate with virgin cable
I have downloaded lela 3.1 and run on the main pc all installs fine untill I open lela half the icons are missing and also the options.
When I hold the cursor over the routor or pc icon I get the options but then they go when I move.
Also when I click on the view from layout to tree all I see is green lines nothing else.
And when I get to the add pc ect there is no close or ok button.
Have "Run as Administrator" still the same.
please help
Message Edited by cav on 08-18-2009 02:16 PM

Well at least 3.0.1 was made available to me for download today.

Similar Messages

WRT54G2 and WRT54G locks-up (freezes) when blocking web sites using Access Restrictions

I am convinced that a few Linksys routers such as WRT54G2 and WRT54G have a major issue when blocking web sites using Access Restrictions (Internet Access Policy). After a few hours of internet access by 15 wired users the Linksys locks-up and blocks all internet web access. The only solution is to restart the power on the router.
We are currently using a Linksys WRT54G2 v1 (firmware 1.0.04). We upgraded the WRT54G2 v1 firmware to the latest 1.0.04 version which did not resolve the issue. NOTE: We were previosuly using a a Linksys WRT54G v1.1 (firmware 4.21.1) until the power supply blew a week after we started blocking web sites using Access Restrictions (Internet Access Policy).
Basically, we have a T1 internet connection and a hub connected to the Linksys router. We are trying to block several web sites such as facebook, myspace, etc. for 15 wired users. We do not use wireless connections.
This is the 2nd time it happened with 2 different models.
Please help ASAP.
Thank you,
Lance
(Mod note: Edited post. Some parts off topic.. Thanks!)

Also, you have already upgrade/re-flash the firmware of your Linksys Router you need to reset and reconfigure your router from scratch. Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

WMP54GS and WRT54GS = dropped connections

I have had the WMP54GS and WRT54GS setup for around 2 years now. I have version 2 of the router, and everything has been fine up until a couple weeks ago. Lately I have been getting randomly dropped from the router. I already have the latest firmware for the router, and have tried changing the channel, and the operating mode to G only, but nothing helps. Sometimes drops occur ever few minutes, sometimes they are so constant that I cant even connect at all. I will refresh my network list and the network will not show up for a few seconds, and then it will, so I will try and connect and it will say Unable to connect.
Sometimes when I refresh the network list and it will show my network like 4 times... like this
SSID
SSID 1
SSID 2
SSID 3
I have SSID broadcast off if that makes any difference...
I have no idea what is going on, is this a problem with the router or the network card? What should I do? thanksMessage Edited by jls1986 on 05-03-200709:38 AM

First of all, give your network a new unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also, do not use your old SSID. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
After you have completed the above stuff, then go into your computer, to your "Preferred Networks" (sometimes called "Profiles" ) and delete all networks named "linksys", also delete all entries with your old SSID. While you are there, delete any network that you don't recognize, or that you no longer use. Add your new network with your new SSID, encryption method (if any), and key (if any). Reboot your modem, router, and computer. Then try to connect to your new network. Once you have connected, return to "Preferred networks" and set your computer to connect to your new SSID automatically. If you have an option that says, "Connect to any available network", turn it off.
If you are running any peer-to-peer (P2P) software (BitTorrent, Ares, etc.), this is known to cause disconnection problems. Go into the P2P software and reduce the number of connections that the software can make.
Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, Bluetooth (including Bluetooth game controllers), microwave ovens, wireless mice and keyboards, and your neighbor's wireless network. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
Hope this helps.
Message Edited by toomanydonuts on 05-04-200705:02 AM
Message Edited by toomanydonuts on 05-04-200705:05 AM

Trouble with WPA in WDS between AE and WRT54G

Hi folks, I've have WDS with my AEBS as a remote base station and a Linksys WRT54G as the main base station. I've be running smoothly with 128 bit WEP encryption for about 6 months, so last weekend I tried upgrading the network to WPA personal .
As soon as I go to WPA the AEBS stops talking to the WRT54G. My G4 powerbook can get an get an IP address directly from the WRT54G (when it's in range) so I'm confident the WPA password is correct. Other than changing the wireless security settings I left the AEBS configuration the same as was working for WEP.
I'm running Airport Admin 4.2 and I've tried both firmware 5.6 and 5.5.1 -- same problem in each case. No connection between AEBS and WRT54G.
I had hoped the AEBS would send and error messages to the system console, but so far I have found no useful diagnostic to debug this problem.
Anyone out there get WPA encryption working for a wireless distribution system between AEBS and WRT54G ?
Thanks,
David

Thanks for the reply Henry.
Hmm... I'm running WRT54G firmware version: v4.20.6, May. 26, 2005.
The SSID's are the same (WEP still works) and personal WPA in the WRT54G is set up using a pre-shared key and TKIP algorithm.
And yet still with DHCP turned on I see that my AEBS is generating "local" IP addresses 256.xxx.xxx.xxx rather than getting an address from the range served by the WRT54G. Since this same configuration work using 128 bit WEP I'm assuming the issue is that the AEBS and WRT54G aren't talking properly.
Do you have a pointer to the previous discussion that suggested WPA on an Linksys AEBS WDS is possible? ... maybe I can contact the author directly.
Thanks again,
David

Speedstream 4100 and WRT54G Version 6 Troubles..

Hello,
i have had my speedstream and wrt54g running together before on my pc. however i just got a laptop and i would like to start using the wireless internet, and when i hook up the wrt54g to my speedstream modem, all the lights are green and the wires are connected, but i cannot seem to connect to the internet. i type in my ip and when i try to connect the modem nothing seems to work. im just connected to my speedstream right now and there is no problems at all, however when i try to have it running with the wrt54g, i cannot connect. does anyone have any thoughts? step by steps? or help in general?
thank you very much.

do it when only my speedstream is connected to my pc? or when i have speedstream and the router connected. because when both are connected, i always get a "no page display"

Play Station 3 and WRT54G Recent Problem

My Play Station 3 and WRT54G DID work fine (connecting to internet) and now it doesn't. Can't connect to the Internet with WRT54G now. Tried Chat Line but since Router is out of Warranty, they won't talk to me without $$$$. What do you do to solve this issue. It DID work. Have V3. Downloaded new software v4.21.1 but haven't installed it. Will this be of any help or will it get worse. I did hook up the Play Station 3 via a WIRED Linksys Router and it works fine so Play Station 3 is okay.

Before your Connect your PS3 to your wireless network, you need to check the wireless settings of your Router (SSID, Security key).
On your Computer, Open an Internet Explorer browser page on a computer hard wired to the router...In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Once you login to the setup page of your Router, Click on the Wireless tab and check whats the Wireless Network Name, and then again you need to click on the sub tab "Wireless Security" and check the Security Mode and Security Key....
On your PS3, Search for your Wireless Network and attempt to connect to your wireless network....
How to connect to your wireless network on your PS3, click Here.

WRT54G and WRT54GS Linksys EasyLink Advisor (LELA) users

If you are experiencing any issues with Linksys EasyLink Advisor (LELA) and the latest firmware on the Linksys.com, you may have to roll back your firmware version. Linksys EasyLink Advisor (LELA) may not function properly with the firmware revisions listed below.
WRT54G
Version 5 - firmware version 1.02.4
Version 6 - firmware version 1.02.4
Version 8 - firmware version 8.00.4
WRT54GS
Version 5 - firmware version 1.52.4
Version 6 - firmware version 1.52.4
Version 7 - firmware version 7.50.4
If you are experiencing issues with LELA and have installed one of the listed firmware files, you will need to roll back your firmware to the previous version. The correct files are listed below and are available for download as an attachement.
WRT54G
Version 5 - firmware version 1.02.2
Version 6 - firmware version 1.02.2
Version 8 - firmware version 8.00.2
WRT54GS
Version 5 - firmware version 1.52.2
Version 6 - firmware version 1.52.2
Version 7 - firmware version 7.50.2
Regards,
Linksys
Message Edited by david on 12-27-2007 05:34 PM
Attachments:
WRT54Gv5v6_v1.02.2_fw.bin ‏1644 KB
WRT54Gv8_v8_00_2_fw.bin ‏1644 KB
WRT54GSv5v6_v1.52.2_fw.bin ‏1644 KB
WRT54GSv7_v7_50_2_fw.bin ‏1644 KB

8.00.4 was available for a short time. I know it caused me a handfull of problems and there was a posted issue with that firmware and LELA.
8.00.4 was removed & replaced with 8.00.2.

XBox 360 and WRT54GS no one can fix this. Please help if you can?

I'm totally out of ideas here and would appreciate it if someone could help me? We have 2 XBox 360's both with the Microsoft XBox wireless adapters. My son has had his since they first came out whatever year that was. My youngest daughter got hers last October. Both XBox's connect to XBox LIVE without a problem via a Linksys WRT54GS wireless router. The problem we can't solve is - my oldest daughter and son-in-law live about a mile from us and they have an XBox 360. When we try to connect to their XBox (or anyone else that's local) to play against her and her husband, it won't connect and gives us a "Disconnected" prompt every time. They have no problem connecting to other XBox's locally but we, for some reason, can't. I can connect our XBox directly into our cable modem bypassing the Linksys and it connects to them, so it isn't the cable modem. I've changed settings on the router, internet, XBox with no luck. I've updated the firmware. I've read thru posts on the internet for weeks and now my brain is mush. Is this fixable or do I need to buy a new wireless router? Also, I don't know if this has anything to do with anything but we have 3 PC's and 3 DVR's also connected to the internet but are hard wired. My kids and grandkids have DSi's, a Playststion3, and a Wii and those all connect via wireless and work great. XBox has this WRT54GS listed as compatable. I'm stumped. I know there's some really sharp folks out there somewhere.......please help if you can? Thanks for any help you could offer!

Have you opened the ports on the router....?
If not then,you need to open ports 53-3074 on the router..Read this link. Also,under the security tab on the router,uncheck Block Anonymous Internet Requests and click on Save Settings...

Xbox 360 and WRT54G

I think I've reached a solution to the issues that I've had w/my Xbox network settings and the console not finding an IP address via the WRT54G v.6. After hours and hours of trying all the suggestions that I've read on this forum I've decided to take the SOB back to the store and exchange it for another brand of wireless router. I think this router and its software are poor and is not complimented by the ability of the average layperson. Anyway, if any of you other poor users are doing a search on Xbox then I hope you read this first before you waste the amount of time I have.
Good Luck.

I didnt hve an issue with my WRT54G and my sons XBox. Entered the security key in the xbox, clicked on connect and away he went. But the difference might be is that I have a vesion 4. Has been running for about 4 months now ever since I recieved the wireless xbox adapter.

Problem with non-wireless Orange Livebox and WRT54GS

Hi all,
I have a non wireless Livebox modem that I was using perfectly. The livebox modem is able to connect itself to the internet, so the only thing I have to do is to plugin the laptop lan cable into the modem and it works.
So I decided to add wireless capabilities and bought the WRT54GS. I followed all the setup steps until the point when it says that it can't connect to the internet. So the setup is the following: the linksys router is connected to the livebox modem via Ethernet cable, though I don't think I need any PPPoE settings as the modem already dials in itself (it's actually also a router I guess).
Currently I'm trying to use Linksys with the Livebox using DHCP instead of PPPoE. It won't work and I don't have the Livebox PPPoE settings.
Is this a very specific scenario ??
I would really like to solve this!
Many thanks,
Joel

Hi,
After some browsing on info on the internet I found how to fix the problem.
Since I have two routers chained together, their private LAN IP addresses must be in a different network. So I changed the default router private IP address from 192.168.1.1 to 192.168.2.1
Now it works.

Airport and WRT54G (LINKSYS)

Does any use the Linksys WRT54G with thier Mac? I bought one knowing it wasn't Mac compatable because I was just going to use it to play my Xbox wireless, but wanted to get airport down the road. I have an iBook and just wanted to know if anyone used it or if they had any problems. Thanks.

Hey Guys,
Just wanted to update you on this process. After tooling around with some 3rd party firmware, some de-bricking techniques (mainly due to me not reading instructions!), and a bit-o-patience...I have my AX sucessfully working with my WRT54G, and the AX is working as my "wireless adapter" for the xbox!
As Henry said, it would be MUCH simpler to purchase a wireless game adapter...and use apple approved base stations (go figure!), but it can be done if you have some time and patience.
I really considered myself fairly dumb on how wireless/routers/etc interacted, and this whole experience boosted me into mild-network-guru status, "mild" being the key word.
-Dave

Cannot Roam/Extend with WAP54G and WRT54G

I purchased a WRT54G wireless router originally and found that the signal was quite weak on the other side of my 4000sf home on adjoining floors. So I purchased a WAP54G to *extend* my network. I have never gotten this to extend the range as claimed by Linksys. This is entirely frustrating. The manual is fairly useless as a troubleshooting guide.
Further, the manual differs from advice on this forum! The manuals says to make sure the SSID, channel and security settings are identical. When I tried this configuration, my laptop did not associate with the better signal of the WAP54G, but still connected to the worse signal of the main WRT54G. So then I saw a post on this forum that said the channels should be different. I tried setting the WRT54G to channel 6 and WAP54G to channel 1. Same results. The laptop is associating with the main router. I have disabled security through the process. I only use MAC addresses to restrict access to cients.
Then I wondered if my laptop's wireless adaptor firmware could be the problem. I found a post somewhere that said one should try changing the "roaming aggressiveness" parameter in the driver. I played with this an it had no effect either. It still associates with the main WRT54G router.
I am totally confused and disappointed. I am getting the feeling that Linksys doesn't really have a viable solution here. I would appreciate someone from Linksys/Cisco providing a thorough post on how to make this work properly.
Thanks.

HI , the one point that interested me was that even though your laptop was able to see the signal of the AP , it was still connecting to the SSID of the router.
One suggestion here....try and remove all networks from under the preferred network list on your PC..(from the wireless connection properties). then add the preferred networks and define the preference list.
Let me know if this works for you.

Airport Express and WRT54G v8

Airport express firmware: v6.3
WRT54G: v8
I'm unable to get my Airport Express to join my existing wireless network in Client mode. I've been able to get it to join other wireless networks using WPA, but with my new WRT54G v8 I haven't succeeded;
- Has anyone got an Airport Express to join a WRT54G v8 wireless network?
- Does the Airport Express support WPA2 when joining a non-Apple 802.11g network? It just shows WPA on the drop-down box for me.
- Is the channel selection important?
- For WPA, I've previously had to enter a $ before my ASCII-format password. Is that true in general for WPA and WPA2?
Having owned this Airport Express for 4 yrs, I have to say I'm dismayed by the level of frustration I've had with it, but I'm locked into it because I used Itunes.

I have the exact same problem. I purchased the airport express yesterday, and trying to hook it up in client mode, wirelessly to the wrt54g to be a print server. I set it up with the ethernet patch cord attached to the airport express and the wrt54g. It gets set up great and I can print and attach my clients (2 windows and 1 mac) wirelessly to the wrt54g network. If I leave the ethernet connected within 5 minutes my wireless network slows to a crawl and then stops traffic. If I disconnect the ethernet cable instantly the network returns to normal speed. But the airport express is no longer reachable. Granted it doesn't have the same IP and has to re-establish connection. However, it never re-establishes and flashes amber. Seems like it has to be security related as it seems to connect OK when the ethernet cord is attached.
I assume that to set the airport express up in client mode that the first configuration has to be made with the ethernet cord attached. Then when it resets itself to re-read the new configuration that I am supposed to unhook the ethernet cord. As it should be talking to the wrt54g through the wireless connection rather then the hard ethernet connection.
The setup steps I go through are:
- push the hard reset to get to factory settings
- connect ethernet patch cord from airport express to wrt54g
- bring up airport utility on macbook pro
- airport is found and press continue
- create a password - continue
- select I have a network - continue
- select join the network wirelessly - continue
- select my network from wrt54g
- select security
--I have tried the 40bit with the wrt54g 64bit WEP
--I have tried 128bit WEP on both
---neither works...if I try something else I need details on how to set it up
- continue and wait for when it restarts....
- If I leave the ethernet cord in, and switch back to the wrt54g wireless network, the airport express shows up in the airport utility very quickly. and seems to work for a while before taking my wireless network down.
- If I remove the ethernet cord and switch the macbook over to the wrt54g wireless network, the airport express never shows up in the airport utility and the airport express flashes amber. From the manual, this says there is connectivity issues. And through process of elimination, looks like the airport express can't get passed the security with the wrt54g.
So, I too, look for assistance.
PS. I have had the wrt54g for a couple of years and have not upgraded firmware so if that is necessary then I can do that.
PSS. At the very first airport express setup there was a new firmware loaded. Does this have to be re-applied if the airport express is hard reset (ie, paper clip in the reset hole for 10 seconds)?

WRE54G v. 2.0 and WRT54G v 6.0 Compatibility

I bought a WRT54G version 6.0 router and WRE54G version 2.0 range expander that I could not get configured properly. Linksys techical support by phone eventually concluded that these two versions are not compatible and that I need a WRE54G v 3.0. This seems bizarre.
The product packaging says the units are compatible without distinguishing versions. You can't even find out the version unless the package is opened to see the back of the unit. I've tried two retailers and they only have version 2.0.
Is anyone aware whether there is a way to get these units to cooperate?

Try connecting the wre54g directly to router through the ethernet port.
Open the wre54g setup page by typing http://192.168.1.240 in the address bar of your browser. Then make sure you have the same wireless settings of router on wre54g like: ssid and encryption.
Also try changing some settings in advanced wireless tab of router such as: change the beacon to 50, the reduce RTS and fragmentation by 40 each.
Then turn of the router and wre54g wait for 10 secs then first turn on router and then the wre54g. see if it works.

IMac and WRT54G v.6

I have a iMac G5, OS 10.4.8, do I need to download the firmware for the WRT54G v.6 router?
Thanks,
lcpjeep

What format? You download the firmware file from the internet. It may be a .zip file which you have to unzip or a .bin which is the actual firmware file. Do not attempt to open or manipulate the firmware file! You then connect to http://192.168.1.1/ go to the Administration - Firmware Upgrade tab and upload the firmware file through a wired connection to the router.

Lela 3.1 and wrt54gs

Similar Messages

Maybe you are looking for