Lemon PowerBook G4 (1.5 GHz) and OS X 10.5.2

My PB is two and a half years old. Installed update 10.5.2 a few days ago. Small problems occurred: no more sound volume in menu bar, external FireWire HD unmounting itself, annoying refresh lines on my external monitor. Today, the computer was slow... Restarted a few times and then noticed that Lower Memory Slot is not recognized anymore.
The last two times it occurred, the motherboard had to be replaced. It is going to be the third time in less than a year and a half, not mentioning other problems like battery and hard drive failures and white spots on the screen. I have had all the problems! Many repaired free by Apple but at a cost to me each time: lost data, lost work, transportation costs, etc.
Am I the only one with an Apple branded lemon!?...

Wrong Forum! I apologize.

Similar Messages

  • PowerMac DP 2 Ghz vs 15" Powerbook & Aperture vs Bridge-ACR and 10 D2X nefs

    10 D2X nefs, equal settings(including sharpening) on each file.
    Test: Time the export/saving 10 full sized JPGs(level 10) on both systems under both Aperture and Bridge/ACR
    In Aperture, stamp the same settings to 10 nefs, wait for the changes to appear on each thumbnail, then select the 10 nefs, and select export versions.
    In Bridge, paste the camera raw settings to the 10 nefs, wait for the thumbnails to show changes(building cache), select the 10 nefs, open ACR under Bridge(not CS2) by pressing CMD-R, in the ACR dialog, select all images on the left, click "Save 10 images".
    PowerMac: G5 dual 2 Ghz, 2 GB RAM, X 800 XT vid card, Aperture library and Bridge cache on separte SATA 7200 RPM internal disk
    PowerBook: 15" 1.5 Ghz, 1.5 GB RAM, ATI Mobility Radeon 9700, and 80 GB disk
    Aperture results:
    PowerMac: 2:07
    PowerBook: 5:06
    Bridge/ACR results:
    PowerMac: 1:18
    PowerBook: 2:12
    As you can see Aperture requires 2x the time to export/save when compared to Bridge/ACR.
    Further, it is amazing that the Powerbook could plow through the images in Bridge in the same time it took the Powermac to export the Aperture images...
    Hmmm, then that would imply the best money is on a Powerbook running Bridge/ACR/CS2?
    Sooooo, if you can cull/sort the images and apply raw settings in Aperture three to four times as fast as in Bridge then it is a wash...

    zozi56 wrote:Can you reproduce the problem without Skype, Bastian?
    From what I remember I have also had this issue when Skype wasn't open.
    Yesterday my computer started up beeping - I took the harddisk out and it started normally (initramfs tho). Then I put it back in and the laptop have been running fine so far. I suspect it might just have been a bad connection, but I am giving it time..
    EDIT: Still experiencing the issue..
    Last edited by Bastian (2014-01-19 18:09:08)

  • My experience with Tiger/new Powerbook 15", 1.67 ghz

    Apple proclaims "Mac OS X v10.4 Tiger. The world’s most advanced operating system."
    Well, that hasn't been the case in my experience.
    I bought a new 15 Powerbook HR, 1.67 ghz, 1.5 gb ram, 80gb hd on 11/4/05 (from MacMall). At this point I have about 20gb free.
    Problems I have noticed with it/OSX.(Most have been fixed by an archive and install done a few weeks ago.) Here's my trial by fire.
    In chronological order
    - trackpad lags
    - many icons not correct after using Migration Assistant.
    - some icons open up the wrong applications
    - window resize button on Finder, and some app windows, doesn't open window to full screen. Also doesn't open window so that scroll bars disappear.
    - dragging a file up or down a window in list view doesn't always make the window scroll up or down when I go up or down to the top or bottom edges. When they do move, it races. Smooth scrolling has no effect.
    - CDr recorded on a machine with OSX 10.3.9 shows up as a recordable CD!
    - screen dims when I disconnect power supply
    -Network option from the Go menu does nothing.
    - Doing a Get Info on a html file has Internet Explorer as the app to open when the files have Mozilla icons
    - icon for some apps have wrong application logo on them
    - screen dims and brightens rapidly, disconcertingly in low light. I turn off the ambient light adjustment on the monitors control panel. This is poorly implemented. Having the keys light up is nice though.
    - can't reset F7 key to take pictures of screen. (I eventually am able to do it.)
    - the clicker gives me a sharp pain in my arm from the second day of use. This has gotten better now but I was worried I might be getting carpal tunnel/repetitive stress injury. (This happened when I got my new Powerbook Firewire too, eventually going away.) The clickers are too stiff when new.
    - I call Applecare. They don't have my registration information I gave them when I signed up on the web. We reset the Power Manger.
    - Quicktime movies have no sound. I later throw out the LAME stuff (Component and Framework) and get sound back.
    - I go to Genius at Apple Store. They tell me I am using a non-native resolution, that is why I am having screen dimming. (Wrong. It was the ambient light control.) They also say whatever software I have installed is likely to be causing most of the other problems.
    - I get Finder freeze #1
    - Preview does not animate gifs. It did with 10.3.9.
    -System sounds do not work. Upon reboot they do. Flakey.
    - some finder windows are not opening up with the item count in list view.
    -desktop gets rearranged
    -occasionally keyboard turns letters into numbers as if number lock is on. It isn't. The it will stop working altogether. Rebooting cures this. (Happens twice before I call AppleCare.)
    - call AppleCare. They have my old address when I bought the Powerbook! I get registered again.I cannot install GarageBand, which I threw out thinking I didn't need it, because the install DVDs that came with my machine have an error reading the software only package. They will send me a new install disk #1.
    - scrolling is not smooth, races.
    - I notice the memory door has 3 out of the 4 screws loose. I tighten them. The battery door feels a little loose too but that is unfixable.
    - keyboard doesn't respond #3
    - I call AppleCare. They have the wrong address still in their database!
    -eject DVD does not work. (It works all other times.)
    - system freeze #2
    - kernal panic #1
    - Call AppleCare. My TechTool Deluxe CD will not boot. I ask for a replacement. (I can't believe they are still using TechTool Deluxe. I remember what a hassle it was trying to get a working disc with my Powerbook Firewire.
    - keyboard types wrong characters #4
    -Print preview does not work. (it does all other times.)
    -Preference for video capture program (BTV) is not remembered
    - audio is only heard when BTV is running (since fixed.)
    - system freeze #3
    - keyboard stops working #5
    - I call Apple Care. We zap P-ram 3X.
    - file sizes incorrect in list view. Have to open window a second time to get correct info.
    - install DVD #1 arrives. It is defective.
    - system freeze #4
    - I update to 10.4.4. I hope this will cure the problems. Nope.
    - Help doesn't work.
    - Battery firmware update process works but isn't smooth. It crashes "unexpectedly" as I check to make sure it is really done. (It kept telling me I needed to do it.)
    - Help works.
    - boot takes forever after 10.4.4 update.
    - battery firmware update wants to run again.
    - file size is wrong in finder list view windows.
    - keyboard stops working #6
    - fan stops yet processor is still VERY busy as I am calibrating battery. Charge is about 5%.
    - I quit IMovie, It then says it quit "unexpectedly". (This happens with other apps still.)
    - I have to use power key to wake it from sleep, as I calibrate battery.
    - keyboard problem #7
    - system freeze # 5
    - text editing in iDVD is very buggy. Cursor is impossible to see against background with many themes. There is no way to increase cursor size.
    - AppleCare says they have sent TechTool Deluxe CD. I haven't gotten it yet.
    - I receive install disk #1. 2 actually. I install software bundle only. It works! I also reinstall CPU help files. Help still doesn't work.
    - I archive and install. (It installs 10.4.2 so I update to 10.4.4), Help doesn't work.
    - Help works without my having done anything. OK.
    - I repair a gazillion permissions. (funny how when you install the system software the permissions then need to be repaired. You would think the system would know to set the permissions correctly upon installation.
    - I notice the order of the right hand menu items has changed (clock, keyboard setup, OS 9 icon...)
    - file sizes wrong in list view
    - BTV has audio loop at times. (See thread on Topic "New Powerbook Audio Stutter / Looping / Echo problem in Using your PowerBook G4 15-inch Aluminum forum.)
    - keyboard problem #8
    - keyboard problem #9
    - I call AppleCare. TechTool Deluxe CD has still not arrived. We discuss other problems. I get hung up on.
    -keyboard problem #10
    - I go to Apple Store. Talk to the genius. He tells me the system software is "a house of cards", adding other software can cause unpredictable results. He zaps P-ram 3x, does something in open firmware. Recommends a clean install. I think about it and later decide not to.
    - I lose system sounds after I install USBVison video capture driver for Tiger. I eventually get it back.
    - I repair LOTS of permissions.
    - The fan starts to make bad noise.
    - system freeze $6
    - I do a Get Info on a file I making with BTV. The OS tells me it is 11GB. I stop the recording and then I check again. It says it is 1.5 gb.
    -iChat won't open. It starts, according to Activity Monitor, runs for about two seconds and then disappears.
    - Network, under the Go menu, does nothing.
    - I call AppleCare.
    - I notice cursor disappears in Firefox.
    - Yahoo IM icon keeps getting moved. All the icons it is next to are spaced about the same but this one keeps getting moved.
    - I Stuff some stuff. The fan keeps running, it is still hot after I am finished. I have to reboot to get things back to normal.
    - Some icons for PING files on my desktop have changed from having Preview icons to Quicktime icons. I use Get Info to change them back from Picture Viewer (OS 9!)
    - the fan comes on with only my normal apps running (Eudora, Firefox, Yahoo IM)
    Ok, that is about all up 'til now. I still haven't gotten my TechTool Deluxe CD but need to give that a few more days. I now have 8 install DVDs. (Another install #1 came yesterday, making a total of 6 #1, and 2 #2s) The address on the invoices are finally correct, most had the wrong town but the right zip code which I had corrected many times.
    The problems that are still recurring are the keyboard problem, applications still sometimes crash "unexpectedly" even though I am quitting them, the file sizes are not right the first time around in finder list view windows. Most everything else was cured by the archive and install. Little weirdnesses still crop up though. I am not sure if the echo problem has been fixed. (Mac OS) Help is still slow to appear.
    Thanks for bearing with me. I do hope things get smoother in the future. I have been using Macs for about 10 years now, starting with a used SE and 7.something, going to a refurbished LC 580 and 7.5.5, a new Powerbook Firewire and 9.2.2. I have also used 10.3.9 which seemed to be a lot more stable than 10.4.
    Cheers,
    John L

    If it was me I would backup to DVD/ External HD if you have and erase / reinstall OSX.
    Update all and once you are finished without the user folder / any of your files on torture the Pbook to see if this happens again.
    This likely will be able to give you an idea about hardware or software problems.
    If all is well , likely not then copy "COPY" over from the backup you "ONLY COPY" documents, music, Photo's, desktop stuff and also place programs back in Applications folder.
    The reason for the above is that in the /user/"you"/library folder it stores the settings for Icon's, prefferences to programs and some other useless stuff + E-mails for either Mac Mail and or Microrubish Entorture "entourage" depending on what you have or used also Itunes prefs.
    Once this is copied leave the "/user/you/library" stuff alone and see how it runs.
    App's/programs will ask to have it's preferences set again as if /when you have installed it for the first time.
    Likely most of the issues if software was in the/becuase of the settings in "/user/you/library".
    If this solves a lot of problems the go with care and copy the "E-MAIL +/OR ENTORUTE/ENTOURAGE + ITUNES" to the same place as where they came from but obviously in /user/you/library/ subfolders etc. same subfolders.
    For Entorture search for a file called "database" as this holds all the e-mail for entourage and by copying it, when you next open Entorture it will pick-up all emails + adresses etc like it was never moved also in the same spot as it was in the new instalation / subfolders etc..
    If all this fails and you as close to what I reccomended here, there is then still some issues then likely it is hardware related.
    How do I know this : Had for 5 times in 365 days had my Pbook in for repair so I have had to about 120+ times had to reinstall OSX 10.3.9 and/or Tiger.
    I hope this helps as for hardware I am buying Alienware or Extreme as they can upgrade the cpuvideobasically all else except the motherboard " amd opteron 64 dualcore + Nvidia fx quadro 1400 + 1 or 2 hd's + 1/2 dvd's etc. etc. $2500"

  • How can I use a USB 3.0 HDD with PowerBook G4 12" 1 Ghz OS 10.4.11?

    Is it possible to use a USB 3.0 HDD with PowerBook G4 12" 1 Ghz OS 10.4.11? I'm using a HDD with a USB 3.0 tyo 2.0 cable that came with the drive, but it has proven to be extremely unreliable...cloned my system and backed numerous files to 3 partitions on the 1 TB drive, now I can no longer access the drive at all. None off my drive utilities will even show the volumes (TechToolPro, Disk Utility, Disk Warrior, or DataRx). If I plug it into a Windows machine running Windows 7, the drive appears, and is functioning perfectly. I'd just really like to use it with my PB G4, if at all possible...thanks for the help folks...StudioBill

    You need drivers and adaptors which I doubt will work with a G4 Powerbook.
    http://www.lacie.com/more/index.htm?id=10112

  • Severe performance problems with JSC2 on PowerBook G4 1.5 GHz

    Help!
    I've reached my wits' end trying to figure out how to get JSC2 to work without pausing for 2-6 minutes per click, right-click, drag, keystroke, etc.! I'm using a PowerBook G4 1.5 GHz (with 1.25 GB RAM and Mac OSX 10.3.9), and earlier, when I was building out projects, the lag time between clicks, typing, etc. would go from a split-second, to a few seconds, then now to minutes...
    Originally, I thought that forcing JSC2 to rebuild the user profile every so often would help, and getting the Sun App Server to undeploy all of its web apps every so often would help, but even that is no longer working. It seems that just starting JSC2 without a user profile (thereby forcing it to create a new, blank one) is pretty much the only time it seems to function without significant lag time or freezing...
    When I run the Mac's Activity Monitor, what seems to be showing up between user actions (clicks, typing, etc.) is ~ 95-100% CPU utilization. Earlier, I was thinking that perhaps the complexity of my Web apps was causing the problem, but that would mean that I can't create moderately sized apps (with a few rowsets in the SessionBean1, for instance). What strikes me as a bit odd is t hat sometimes, during the high CPU utilization periods, there is little or no disk activity.
    I tried adjusting the settings in etc/creator.conf, but it doesn't seem to matter; the machine will gobble up all the memory (physical + virtual) very quickly.
    Is there something I'm missing, or some sort of tuning that I need to do? Is there some sort of GC behavior that is wreaking havoc on my PB? Should be removing entries from the etc/creator.conf file that might help?

    Well, I've tried stuff on the two threads you suggested, but still the same issue...
    Anyway, I used the Stack Trace WebStart tool to create the data below during one of the pauses (a relatively short pause):
    Full thread dump Java HotSpot(TM) Client VM (1.4.2-56 mixed mode):
    "Stack Trace Remote Thread" prio=5 tid=0x38987300 nid=0x3a7a3200 waiting on condition [0..f0d0a260]
    "Inactive RequestProcessor thread [Was:Default RequestProcessor/org.netbeans.modules.j2ee.deployment.impl.ui.InstanceNode$2]" daemon prio=1 tid=0x38b9f230 nid=0x3a7bc200 in Object.wait() [f0c08000..f0c08b20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x6514358> (a java.lang.Object)
         at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:692)
         - locked <0x6514358> (a java.lang.Object)
    "VCS Command Tasks Starter Loop" daemon prio=1 tid=0x3893cbf0 nid=0x35747000 in Object.wait() [f174e000..f174eb20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x9d08158> (a org.netbeans.modules.vcscore.commands.CommandProcessor)
         at java.lang.Object.wait(Object.java:429)
         at org.netbeans.modules.vcscore.commands.CommandProcessor.executorStarterLoop(CommandProcessor.java:757)
         - locked <0x9d08158> (a org.netbeans.modules.vcscore.commands.CommandProcessor)
         at org.netbeans.modules.vcscore.commands.CommandProcessor.access$700(CommandProcessor.java:65)
         at org.netbeans.modules.vcscore.commands.CommandProcessor$5.run(CommandProcessor.java:776)
         at java.lang.Thread.run(Thread.java:552)
    "MDR event dispatcher" daemon prio=6 tid=0x005ed550 nid=0x1e35e00 in Object.wait() [f13c7000..f13c7b20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0xa660060> (a java.util.LinkedList)
         at java.lang.Object.wait(Object.java:429)
         at org.netbeans.mdr.util.EventNotifier$EventsDelivery.run(EventNotifier.java:257)
         - locked <0xa660060> (a java.util.LinkedList)
         at java.lang.Thread.run(Thread.java:552)
    "DestroyJavaVM" prio=5 tid=0x00501180 nid=0x1801600 waiting on condition [0..f0800270]
    "TimerQueue" daemon prio=5 tid=0x005c7ab0 nid=0x35284400 in Object.wait() [f1244000..f1244b20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0xa16e4b0> (a javax.swing.TimerQueue)
         at javax.swing.TimerQueue.run(TimerQueue.java:231)
         - locked <0xa16e4b0> (a javax.swing.TimerQueue)
         at java.lang.Thread.run(Thread.java:552)
    "AWT-EventQueue-1" prio=6 tid=0x0051e500 nid=0x1c19a00 in Object.wait() [f11c3000..f11c3b20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0xa16e578> (a java.awt.EventQueue)
         at java.lang.Object.wait(Object.java:429)
         at java.awt.EventQueue.getNextEvent(EventQueue.java:363)
         - locked <0xa16e578> (a java.awt.EventQueue)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:195)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:178)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:170)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    "Creator Error Handler Listener" prio=5 tid=0x005c6000 nid=0x1fd2800 runnable [f0ebd000..f0ebdb20]
         at java.net.PlainSocketImpl.socketAccept(Native Method)
         at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:353)
         - locked <0xa16e628> (a java.net.PlainSocketImpl)
         at java.net.ServerSocket.implAccept(ServerSocket.java:448)
         at java.net.ServerSocket.accept(ServerSocket.java:419)
         at com.sun.rave.errorhandler.DebugServerThread.run(DebugServerThread.java:81)
    "AWT-Shutdown" prio=5 tid=0x0051e3a0 nid=0x1917800 in Object.wait() [f1040000..f1040b20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x98dcb08> (a java.lang.Object)
         at java.lang.Object.wait(Object.java:429)
         at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
         - locked <0x98dcb08> (a java.lang.Object)
         at java.lang.Thread.run(Thread.java:552)
    "Java2D Disposer" daemon prio=10 tid=0x0051a5e0 nid=0x1900c00 in Object.wait() [f0f3e000..f0f3eb20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x98dcb78> (a java.lang.ref.ReferenceQueue$Lock)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
         - locked <0x98dcb78> (a java.lang.ref.ReferenceQueue$Lock)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
         at sun.java2d.Disposer.run(Disposer.java:116)
         at java.lang.Thread.run(Thread.java:552)
    "Active Reference Queue Daemon" daemon prio=1 tid=0x00516f40 nid=0x18ec800 in Object.wait() [f0e3c000..f0e3cb20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x98dcbe8> (a java.lang.ref.ReferenceQueue$Lock)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
         - locked <0x98dcbe8> (a java.lang.ref.ReferenceQueue$Lock)
         at org.openide.util.Utilities$ActiveQueue.run(Utilities.java:2465)
         at java.lang.Thread.run(Thread.java:552)
    "Thread-1" daemon prio=5 tid=0x00516820 nid=0x18c8200 in Object.wait() [f0dbb000..f0dbbb20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x98dcc60> (a java.util.TaskQueue)
         at java.util.TimerThread.mainLoop(Timer.java:429)
         - locked <0x98dcc60> (a java.util.TaskQueue)
         at java.util.TimerThread.run(Timer.java:382)
    "AWT-AppKit" daemon prio=5 tid=0x005125f0 nid=0xa000b2a4 runnable [0..bfffe360]
    "CLI Requests Server" daemon prio=5 tid=0x00510d30 nid=0x1888200 runnable [f0c89000..f0c89b20]
         at java.net.PlainSocketImpl.socketAccept(Native Method)
         at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:353)
         - locked <0x98dcf60> (a java.net.PlainSocketImpl)
         at java.net.ServerSocket.implAccept(ServerSocket.java:448)
         at java.net.ServerSocket.accept(ServerSocket.java:419)
         at org.netbeans.CLIHandler$Server.run(CLIHandler.java:758)
    "Signal Dispatcher" daemon prio=10 tid=0x00508600 nid=0x1813600 runnable [0..0]
    "Finalizer" daemon prio=8 tid=0x00506c40 nid=0x1814400 in Object.wait() [f0a04000..f0a04b20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0xa16e7b0> (a java.lang.ref.ReferenceQueue$Lock)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
         - locked <0xa16e7b0> (a java.lang.ref.ReferenceQueue$Lock)
         at org.netbeans.modules.applemenu.FontReferenceQueue.remove(FontReferenceQueue.java:80)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
         at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
    "Reference Handler" daemon prio=10 tid=0x00506910 nid=0x1802600 in Object.wait() [f0983000..f0983b20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x98dcd50> (a java.lang.ref.Reference$Lock)
         at java.lang.Object.wait(Object.java:429)
         at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:115)
         - locked <0x98dcd50> (a java.lang.ref.Reference$Lock)
    "VM Thread" prio=5 tid=0x00506190 nid=0x1803200 runnable
    "VM Periodic Task Thread" prio=10 tid=0x00508540 nid=0x1813200 waiting on condition
    "Exception Catcher Thread" prio=10 tid=0x00501110 nid=0x1802e00 runnable
    =====
    Memory
    =====
    Total: 437694464
    Free: 161603568
    Max: 620756992
    [############################################===========================.............................]
    Available Processors: 1
    attach 477
    GNU gdb 5.3-20030128 (Apple version gdb-330.1) (Fri Jul 16 21:42:28 GMT 2004)
    Copyright 2003 Free Software Foundation, Inc.
    GDB is free software, covered by the GNU General Public License, and you are
    welcome to change it and/or distribute copies of it under certain conditions.
    Type "show copying" to see the conditions.
    There is absolutely no warranty for GDB. Type "show warranty" for details.
    This GDB was configured as "powerpc-apple-darwin".
    (gdb) (gdb) Attaching to process 477.
    info sharedlibrary dyld
    Reading symbols for shared libraries . done
    Reading symbols for shared libraries ............................................................................................. done
    0x900078b8 in mach_msg_trap ()
    (gdb) Requested State Current State
    Num Basename Type Address Reason | | Source
    | | | | | | | |
    2 dyld - 0x8fe00000 dyld Y Y /usr/lib/dyld at 0x8fe00000 (offset 0x0) with prefix "__dyld_"
    3 JavaVM F 0x91ebd000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/A/JavaVM at 0x91ebd000 (offset 0x0)
    4 CoreFoundation F 0x901c0000 dyld Y Y /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation at 0x901c0000 (offset 0x0)
    5 libSystem.B.dylib - 0x90000000 dyld Y Y /usr/lib/libSystem.B.dylib at 0x90000000 (offset 0x0)
    (commpage objfile is) /usr/lib/libSystem.B.dylib[LC_SEGMENT.__DATA.__commpage]
    6 Foundation F 0x90a20000 dyld Y Y /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation at 0x90a20000 (offset 0x0)
    7 libicucore.A.dylib - 0x968d0000 dyld Y Y /usr/lib/libicucore.A.dylib at 0x968d0000 (offset 0x0)
    8 libmathCommon.A.dylib - 0x939d0000 dyld Y Y /usr/lib/system/libmathCommon.A.dylib at 0x939d0000 (offset 0x0)
    (symbols read from) /usr/libexec/gdb/symfiles/libmathCommon.A.dylib.syms
    9 libxml2.2.dylib - 0x80830000 dyld Y Y /usr/lib/libxml2.2.dylib at 0x80830000 (offset 0x0)
    10 CoreServices F 0x90700000 dyld Y Y /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices at 0x90700000 (offset 0x0)
    11 SystemConfiguration F 0x90d00000 dyld Y Y /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfiguration at 0x90d00000 (offset 0x0)
    12 libobjc.A.dylib - 0x90830000 dyld Y Y /usr/lib/libobjc.A.dylib at 0x90830000 (offset 0x0)
    13 libz.1.dylib - 0x945b0000 dyld Y Y /usr/lib/libz.1.dylib at 0x945b0000 (offset 0x0)
    14 libiconv.2.dylib - 0x96cb0000 dyld Y Y /usr/lib/libiconv.2.dylib at 0x96cb0000 (offset 0x0)
    15 CarbonCore F 0x902b0000 dyld Y Y /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore at 0x902b0000 (offset 0x0)
    16 OSServices F 0x90610000 dyld Y Y /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServices.framework/Versions/A/OSServices at 0x90610000 (offset 0x0)
    17 CFNetwork F 0x927f0000 dyld Y Y /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwork.framework/Versions/A/CFNetwork at 0x927f0000 (offset 0x0)
    18 WebServicesCore F 0x946ed000 dyld Y Y /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServicesCore.framework/Versions/A/WebServicesCore at 0x946ed000 (offset 0x0)
    19 SearchKit F 0x94650000 dyld Y Y /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchKit.framework/Versions/A/SearchKit at 0x94650000 (offset 0x0)
    20 IOKit F 0x90584000 dyld Y Y /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit at 0x90584000 (offset 0x0)
    21 DiskArbitration F 0x907f0000 dyld Y Y /System/Library/PrivateFrameworks/DiskArbitration.framework/Versions/A/DiskArbitration at 0x907f0000 (offset 0x0)
    22 Security F 0x920c0000 dyld Y Y /System/Library/Frameworks/Security.framework/Versions/A/Security at 0x920c0000 (offset 0x0)
    23 libresolv.9.dylib - 0x94610000 dyld Y Y /usr/lib/libresolv.9.dylib at 0x94610000 (offset 0x0)
    24 Bom F 0x91280000 dyld Y Y /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom at 0x91280000 (offset 0x0)
    25 libclient.dylib - 0x94723000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libclient.dylib at 0x94723000 (offset 0x0)
    26 libverify.dylib - 0x91ec5000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libverify.dylib at 0x91ec5000 (offset 0x0)
    27 libjava.jnilib - 0x95ec2000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libjava.jnilib at 0x95ec2000 (offset 0x0)
    28 libzip.jnilib - 0x80d5b000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libzip.jnilib at 0x80d5b000 (offset 0x0)
    29 JavaApplicationLauncher F 0x7df12000 dyld Y Y /System/Library/PrivateFrameworks/JavaApplicationLauncher.framework/Versions/A/JavaApplicationLauncher at 0x7df12000 (offset 0x0)
    30 ApplicationServices F 0x90810000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/ApplicationServices at 0x90810000 (offset 0x0)
    call (void *)dlopen("/Users/slinc/Library/Caches/Java Web Start/cache/http/Dtmitevski.users.mcs2.netarray.com/P80/DMstacktrace/DMapp/RNmacproc.jar/libdump.jnilib", 1)
    31 QuickTime F 0x814d9000 dyld Y Y /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime at 0x814d9000 (offset 0x0)
    32 AppKit F 0x92e70000 dyld Y Y /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit at 0x92e70000 (offset 0x0)
    33 AE F 0x92727000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/AE.framework/Versions/A/AE at 0x92727000 (offset 0x0)
    34 ATS F 0x96b50000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ATS.framework/Versions/A/ATS at 0x96b50000 (offset 0x0)
    35 ColorSync F 0x913a0000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ColorSync.framework/Versions/A/ColorSync at 0x913a0000 (offset 0x0)
    36 CoreGraphics F 0x9652c000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics at 0x9652c000 (offset 0x0)
    37 PrintCore F 0x916e0000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/PrintCore.framework/Versions/A/PrintCore at 0x916e0000 (offset 0x0)
    38 QD F 0x915e0000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/QD.framework/Versions/A/QD at 0x915e0000 (offset 0x0)
    39 LangAnalysis F 0x912e0000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LangAnalysis.framework/Versions/A/LangAnalysis at 0x912e0000 (offset 0x0)
    40 HIServices F 0x908c5000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/HIServices.framework/Versions/A/HIServices at 0x908c5000 (offset 0x0)
    41 SpeechSynthesis F 0x90c32000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/SpeechSynthesis.framework/Versions/A/SpeechSynthesis at 0x90c32000 (offset 0x0)
    42 FindByContent F 0x92070000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/FindByContent.framework/Versions/A/FindByContent at 0x92070000 (offset 0x0)
    43 LaunchServices F 0x92430000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/LaunchServices at 0x92430000 (offset 0x0)
    44 Carbon F 0x90d40000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon at 0x90d40000 (offset 0x0)
    45 CoreAudio F 0x90702000 dyld Y Y /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio at 0x90702000 (offset 0x0)
    46 AudioToolbox F 0x93846000 dyld Y Y /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox at 0x93846000 (offset 0x0)
    47 AudioUnit F 0x96a7b000 dyld Y Y /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit at 0x96a7b000 (offset 0x0)
    48 Accelerate F 0x8fd50000 dyld Y Y /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate at 0x8fd50000 (offset 0x0)
    49 libstdc++.6.dylib - 0x80a50000 dyld Y Y /usr/lib/libstdc++.6.dylib at 0x80a50000 (offset 0x0)
    50 libgcc_s.1.dylib - 0x81c79000 dyld Y Y /usr/lib/libgcc_s.1.dylib at 0x81c79000 (offset 0x0)
    51 HIToolbox F 0x92880000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.framework/Versions/A/HIToolbox at 0x92880000 (offset 0x0)
    52 SpeechRecognition F 0x917e0000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecognition.framework/Versions/A/SpeechRecognition at 0x917e0000 (offset 0x0)
    53 DesktopServicesPriv F 0x90940000 dyld Y Y /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/DesktopServicesPriv at 0x90940000 (offset 0x0)
    54 libbsm.dylib - 0x9415d000 dyld Y Y /usr/lib/libbsm.dylib at 0x9415d000 (offset 0x0)
    55 libcups.2.dylib - 0x939a0000 dyld Y Y /usr/lib/libcups.2.dylib at 0x939a0000 (offset 0x0)
    56 ImageCapture F 0x917fc000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture.framework/Versions/A/ImageCapture at 0x917fc000 (offset 0x0)
    57 SecurityHI F 0x91956000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.framework/Versions/A/SecurityHI at 0x91956000 (offset 0x0)
    58 Ink F 0x96c00000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework/Versions/A/Ink at 0x96c00000 (offset 0x0)
    59 Help F 0x9277a000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framework/Versions/A/Help at 0x9277a000 (offset 0x0)
    60 OpenScripting F 0x95e0a000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting.framework/Versions/A/OpenScripting at 0x95e0a000 (offset 0x0)
    61 Print F 0x96a04000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/A/Print at 0x96a04000 (offset 0x0)
    62 HTMLRendering F 0x91303000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering.framework/Versions/A/HTMLRendering at 0x91303000 (offset 0x0)
    63 NavigationServices F 0x98f2d000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationServices.framework/Versions/A/NavigationServices at 0x98f2d000 (offset 0x0)
    64 CarbonSound F 0x927b2000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.framework/Versions/A/CarbonSound at 0x927b2000 (offset 0x0)
    65 CommonPanels F 0x94580000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels.framework/Versions/A/CommonPanels at 0x94580000 (offset 0x0)
    66 vecLib F 0x96e80000 dyld Y Y /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib at 0x96e80000 (offset 0x0)
    67 vImage F 0x87f60000 dyld Y Y /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.framework/Versions/A/vImage at 0x87f60000 (offset 0x0)
    68 vecLib F 0x8bde2000 dyld Y Y /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/vecLib at 0x8bde2000 (offset 0x0)
    69 libmx.A.dylib - 0x81c90000 dyld Y Y /usr/lib/libmx.A.dylib at 0x81c90000 (offset 0x0)
    70 libCGATS.A.dylib - 0x917b6000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib at 0x917b6000 (offset 0x0)
    71 libCSync.A.dylib - 0x907c7000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib at 0x907c7000 (offset 0x0)
    72 libPDFRIP.A.dylib - 0x91b10000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libPDFRIP.A.dylib at 0x91b10000 (offset 0x0)
    73 libPSRIP.A.dylib - 0x91b50000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libPSRIP.A.dylib at 0x91b50000 (offset 0x0)
    74 libRIP.A.dylib - 0x91b80000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib at 0x91b80000 (offset 0x0)
    75 libssl.0.9.7.dylib - 0x96aa0000 dyld Y Y /usr/lib/libssl.0.9.7.dylib at 0x96aa0000 (offset 0x0)
    76 libcrypto.0.9.7.dylib - 0x91969000 dyld Y Y /usr/lib/libcrypto.0.9.7.dylib at 0x91969000 (offset 0x0)
    77 libvMisc.dylib - 0x95f00000 dyld Y Y /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvMisc.dylib at 0x95f00000 (offset 0x0)
    78 libvDSP.dylib - 0x95e40000 dyld Y Y /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvDSP.dylib at 0x95e40000 (offset 0x0)
    79 libBLAS.dylib - 0x954c0000 dyld Y Y /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libBLAS.dylib at 0x954c0000 (offset 0x0)
    80 libLAPACK.dylib - 0x95b20000 dyld Y Y /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libLAPACK.dylib at 0x95b20000 (offset 0x0)
    81 libnet.jnilib - 0x80d6b000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libnet.jnilib at 0x80d6b000 (offset 0x0)
    82 libawt.jnilib - 0x81070000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libawt.jnilib at 0x81070000 (offset 0x0)
    83 Cocoa F 0x90ec0000 dyld Y Y /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa at 0x90ec0000 (offset 0x0)
    84 WebKit F 0x914ad000 dyld Y Y /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit at 0x914ad000 (offset 0x0)
    85 libfontmanager.jnilib - 0x80fd0000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libfontmanager.jnilib at 0x80fd0000 (offset 0x0)
    86 JavaScriptCore F 0x9419b000 dyld Y Y /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore at 0x9419b000 (offset 0x0)
    87 WebCore F 0x97900000 dyld Y Y /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.framework/Versions/A/WebCore at 0x97900000 (offset 0x0)
    88 libxslt.1.dylib - 0x806c0000 dyld Y Y /usr/lib/libxslt.1.dylib at 0x806c0000 (offset 0x0)
    89 libcmm.jnilib - 0x81060000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libcmm.jnilib at 0x81060000 (offset 0x0)
    90 libsuncmm.jnilib - 0x80560000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libsuncmm.jnilib at 0x80560000 (offset 0x0)
    91 libjpeg.jnilib - 0x80e70000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libjpeg.jnilib at 0x80e70000 (offset 0x0)
    92 liblaf.jnilib - 0x7b5ac000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/liblaf.jnilib at 0x7b5ac000 (offset 0x0)
    93 libnio.jnilib - 0x80d90000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libnio.jnilib at 0x80d90000 (offset 0x0)
    94 libdcpr.jnilib - 0x81000000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libdcpr.jnilib at 0x81000000 (offset 0x0)
    (gdb) Reading symbols for shared libraries . done
    $1 = (void *) 0x39b51c20
    call (void *)dlsym($1, "inject_start")
    (gdb) $2 = (void *) 0x34f77b48
    disassemble jio_vfprintf
    (gdb) Dump of assembler code for function jio_vfprintf:
    0x949142d0 <jio_vfprintf+0>:     mflr     r8
    0x949142d4 <jio_vfprintf+4>:     bcl-     20,4*cr7+so,0x949142d8 <jio_vfprintf+8>
    0x949142d8 <jio_vfprintf+8>:     mflr     r2
    0x949142dc <jio_vfprintf+12>:     mtlr     r8
    0x949142e0 <jio_vfprintf+16>:     addis     r7,r2,4065
    0x949142e4 <jio_vfprintf+20>:     lwz     r6,28248(r7)
    0x949142e8 <jio_vfprintf+24>:     lwz     r12,0(r6)
    0x949142ec <jio_vfprintf+28>:     cmpwi     r12,0
    0x949142f0 <jio_vfprintf+32>:     beq-     0x949142fc <jio_vfprintf+44>
    0x949142f4 <jio_vfprintf+36>:     mtctr     r12
    0x949142f8 <jio_vfprintf+40>:     bctr
    0x949142fc <jio_vfprintf+44>:     b     0x9493ded0 <dyld_stub_vfprintf>
    call ($2)("/System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libclient.dylib", "/tmp/stacktrace32624data", 515)
    End of assembler dump.
    detach
    (gdb) $3 = 0
    quit
    ================================================================================
    Full thread dump Java HotSpot(TM) Client VM (1.4.2-56 mixed mode):
    "Stack Trace Remote Thread" prio=5 tid=0x38ba02c0 nid=0x350b0800 waiting on condition [0..f1142260]
    "Inactive RequestProcessor thread [Was:Default RequestProcessor/org.netbeans.modules.navigator.Navigator$ActNodeSetter]" daemon prio=1 tid=0x38b9ffe0 nid=0x3a77a400 in Object.wait() [f10c1000..f10c1b20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x19b98b68> (a java.lang.Object)
         at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:692)
         - locked <0x19b98b68> (a java.lang.Object)
    "Inactive RequestProcessor thread [Was:TimedSoftReference/org.openide.util.TimedSoftReference]" daemon prio=1 tid=0x38b9fd20 nid=0x3a7c8600 in Object.wait() [f0fbf000..f0fbfb20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x19b98bc0> (a java.lang.Object)
         at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:692)
         - locked <0x19b98bc0> (a java.lang.Object)
    "Inactive RequestProcessor thread [Was:TimedSoftReference/org.openide.util.TimedSoftReference]" daemon prio=1 tid=0x38b9f230 nid=0x3a7bc200 in Object.wait() [f0c08000..f0c08b20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x19b98c18> (a java.lang.Object)
         at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:692)
         - locked <0x19b98c18> (a java.lang.Object)
    "VCS Command Tasks Starter Loop" daemon prio=1 tid=0x3893cbf0 nid=0x35747000 in Object.wait() [f174e000..f174eb20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x9d08158> (a org.netbeans.modules.vcscore.commands.CommandProcessor)
         at java.lang.Object.wait(Object.java:429)
         at org.netbeans.modules.vcscore.commands.CommandProcessor.executorStarterLoop(CommandProcessor.java:757)
         - locked <0x9d08158> (a org.netbeans.modules.vcscore.commands.CommandProcessor)
         at org.netbeans.modules.vcscore.commands.CommandProcessor.access$700(CommandProcessor.java:65)
         at org.netbeans.modules.vcscore.commands.CommandProcessor$5.run(CommandProcessor.java:776)
         at java.lang.Thread.run(Thread.java:552)
    "MDR event dispatcher" daemon prio=6 tid=0x005ed550 nid=0x1e35e00 in Object.wait() [f13c7000..f13c7b20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0xa660060> (a java.util.LinkedList)
         at java.lang.Object.wait(Object.java:429)
         at org.netbeans.mdr.util.EventNotifier$EventsDelivery.run(EventNotifier.java:257)
         - locked <0xa660060> (a java.util.LinkedList)
         at java.lang.Thread.run(Thread.java:552)
    "DestroyJavaVM" prio=5 tid=0x00501180 nid=0x1801600 waiting on condition [0..f0800270]
    "TimerQueue" daemon prio=5 tid=0x005c7ab0 nid=0x35284400 in Object.wait() [f1244000..f1244b20]
         at java.lang.Object.wait(Native Method)
         - waiting on <0xa16e4b0> (a javax.swing.TimerQueue)
         at javax.swing.TimerQueue.run(TimerQueue.java:231)
         - locked <0xa16e4b0> (a javax.swing.TimerQueue)
         at java.lang.Thread.run(Thread.java:552)
    "AWT-EventQueue-1" prio=6 tid=0x0051e500 nid=0x1c19a00 runnable [f11c1000..f11c3b20]
         at java.io.UnixFileSystem.getBooleanAttributes0(Native Method)
         at java.io.UnixFileSystem.getBooleanAttributes(UnixFileSystem.java:221)
         at java.io.File.exists(File.java:680)
         at org.netbeans.modules.masterfs.MasterFileObject.isValid(MasterFileObject.java:78)
         at org.netbeans.modules.masterfs.Cache.get(Cache.java:62)
         at org.netbeans.modules.masterfs.Cache.getOrCreate(Cache.java:83)
         at org.netbeans.modules.masterfs.MasterFileObject.getFileObject(MasterFileObject.java:274)
         at org.openide.filesystems.FileObject.getFileObject(FileObject.java:563)
         at org.openide.filesystems.FileUtil.createFolder(FileUtil.java:204)
         at com.sun.rave.api.jsf.project.JsfProjectHelper.getPageBeanRoot(JsfProjectHelper.java:116)
         at com.sun.rave.api.jsf.project.JsfProjectHelper.getBasePathForJava(JsfProjectHelper.java:786)
         at com.sun.rave.api.jsf.project.JsfProjectHelper.getJspForJava(JsfProjectHelper.java:828)
         at com.sun.rave.project.jsfloader.Utils.findJspForJava(Utils.java:67)
         at com.sun.rave.project.jsfloader.JsfJavaDataObject.getCookie(JsfJavaDataObject.java:62)
         at com.sun.rave.insync.Util.retrieveDocument(Util.java:97)
         at com.sun.rave.insync.SourceUnit.grabDocument(SourceUnit.java:106)
         at com.sun.rave.insync.SourceUnit.sync(SourceUnit.java:429)
         at com.sun.rave.insync.beans.BeansUnit.syncSubUnits(BeansUnit.java:200)
         at com.sun.rave.insync.faces.FacesPageUnit.syncSubUnits(FacesPageUnit.java:225)
         at com.sun.rave.insync.beans.BeansUnit.sync(BeansUnit.java:174)
         at com.sun.rave.insync.live.LiveUnit.sync(LiveUnit.java:288)
         at com.sun.rave.insync.live.LiveUnitWrapper.sync(LiveUnitWrapper.java:115)
         at com.sun.rave.insync.models.FacesModel.syncImpl(FacesModel.java:899)
         at com.sun.rave.insync.Model.sync(Model.java:207)
         at com.sun.rave.insync.ModelSe

  • 6th Gen iPod Nano won't sync to Powerbook G4 1.5 Ghz PowerPC iTunes 9.2

    My iPod classic bit the dust so I bought a new iPod Nano 6th Gen. My Powerbook G4 1.5 Ghz PowerPC can only run iTunes 9.2. From what I can tell this new iPod Nano won't work with my Powerbook, which is hard to believe since my old school iPod from the early 2000s worked great until I dropped it and it split in half.
    My iPhone 3Gs syncs fine so it is incredibly annoying and disturbing that a new iPod Nano 6th gen. won't sync.
    If in order to get this iPod Nano to work with my current system I'm required to upgrade my iTunes from 9.2 to 10 then I need to upgrade my OS from OS 10.4.11 to OS 10.5 which requires that I upgrade computer by purchasing an entirely new laptop then I might just have to revert to my old school Sony DiscMan.
    My iPod Classic 2nd gen. worked great until it broke and my iPhone Gs syncs great, so I can't believe that this new iPod Nano 6th gen. won't work without a simple fix.
    Come Apple, don't fail me now.

    Your problem is completely different from the original post. The OP could not run the correct version of iTunes on their older computer. You're much more likely to get the help you need by starting your own thread with a properly descriptive subject line.
    If you need instructions on how to start a new thread, see this link:
    http://discussions.apple.com/ann.jspa?annID=650
    Best of luck.

  • Harddrive from a powerbook g4 17  into a powerbook g4 1.33 ghz with OSX Tiger already installed.

    Hi,
    Quick question.
    I have put a harddrive from a powerbook g4 17  into a powerbook g4 1.33 ghz with Tigeralready installed.
    Was this and is this a bad idea or is it ok if I just check/repairpermisions or wil this cause lots of problems and I should reinstall OSX?
    I know with windows this would never work but I don’t knowif OSX really controls how the mac runs of if its just the firmware alreadythere.
    First boot it worked and I was in Tiger for about 5 min but then I added ram and it just try’s to boot into OSX now but after 20min of waiting I reset the powerbook.
    thanks.
    Sam

    thanks, I think your correct normnod but Im not sure if it includes updates and if they are machine Specific.
    It was from 17 inch 1.67ghz to a 12 inch 867Mhz and like a say it boot the first time but now I get a small
    blip sound when I press the power button and no dong sound so maybe I did mess something up.
    I did try pulling the battery and using shift > control > option andpower and I got no boot and blank screen again
    (this is model A1010) sorry its wrong title.
    and then the second time I got fan sound a dvd rom drive running but nothing on the screen and again no dong.
    seeing if leaving it without its battery overnight will help by resetting everything.
    I might have apple jack installed on the harddrive already if thet will help? but i still need a dong to get into that.
    Sam

  • Going to buy the 12'' ibook, how much GB, GHz, and MB is good?

    i want to buy the 12'' ibook, for college, i will not be using it for video games or videos, just exclusively internet and word documents, and some pictures. whats a good enough GB, GHz, and MB for me in my situation? thanks!!

    Here's something to look at first: iBook and PowerBook Reliability:
    http://www. macintouch.com/reliability/laptops.html
    To run Tiger, you can do it with a iBook G4 with a 30GB hard drive, a 800Mhz processor, and 512 MB of memory. The 30GB hard drive is really small and bigger would be better. More MB of memory and a faster processor would be better.
    To run Panther, you could do it with the same processor and hard drive, and 256 MB of RAM. But again, more RAM is better.
    I am not familiar with other iBook models, but possibly you could also use a G3 or older for your purposes.
    You also want to get all of the original CD's that come with whichever iBook you select.
    Good luck!

  • Powerbook G4 1.25 GHz 1.5 MB RAM

    I have tried to install Leopard on my PowerBook G4 1.25 GHz with 1.5 MB RAM. After I insert the disk and restart following a delay while the DVD is being searched, I get an error message that my computer needs to be restarted. I can't get past this error message no matter how many times I restart. Any suggestions?

    I installed Leopard over Tiger and had lots of problems. The system was very slow, and software update crashed, as did other updaters. I solved the problem by using Time Machine to back up the entire computer to a firewire drive. I then restarted with the installation DVD in the drive, and holding the "C" key to boot from CD/DVD. Hold the "C" key all the way through the boot process to be sure. Do not skip the DVD Disk check. When the install screen comes up, select your PowerBook drive, and use the erase and install option to do a complete wipe and install. When the install is done, and the space age type finishes flying around, you will be given the option to migrate data from another computer, or to get the data from a Time Machine back-up. Select the Time Machine back-up (it takes a minute to calculate how much data there is). Let it do its thing. You will end up with a fresh system with all of your programs, settings, etc. Finally, run System Update to make sure you have all of the latest Apple updates to Leopard.
    The whole process took me about 6 hours. I let Time Machine do its back-up when I went to sleep--I think it took 3-4 hours. The install of Leopard takes about 1.5 hours, and the Time Machine restore took another hour.
    Hope this works for you.

  • Airport Express extends 5 Ghz and 2.4 Ghz or just one at a time?

    I recently switched my dual band Time Capsule to use different names for the 5 Ghz and 2.4 Ghz networks.
    Will the Airport Express extend both or just one at a time, if so, which one will it extend?
    I have two Airport Express modules, bought a long time apart, is there any difference in functionality and how do I tell them apart if this is the case?
    All are running the most recent firmware version.

    Welcome to the discussion area, Mike!
    Will the Airport Express extend both or just one at a time, if so, which one will it extend?
    The AirPort Express is a single band device, so it can extend either the 2.4 GHz or 5 GHz band, +but not both at the same time+. Since you have different names for the 5 GHz and 2.4 GHz bands, the Express will extend the 2.4 GHz band by default. Using AirPort Utility, the setup application for the AirPorts, it is possible to configure the AirPort Express to extend either band.
    If you are perhaps thinking of extending the 5 GHz band, this can be a bit tricky because 5 GHZ signals do not travel effectively over distance or penetrate obstructions as well as 2.4 GHz signals. You almost have to have a line-of-sight relationship between the Time Capsule and the AirPort Express to be able to extend the 5 GHz band.
    I have two Airport Express modules, bought a long time apart, is there any difference in functionality and how do I tell them apart if this is the case?
    Look on the side of the AirPort Express for the model number in the small print. You'll need Model No A 1264 to be able to "extend". If you have the older Model No A 1084, that version will not be able to "extend" a wireless network, but you could use it to "join" the wireless network and stream AirTunes to the device.
    All are running the most recent firmware version.
    That would be 7.5.2. If you have the older version of the AirPort Express, the latest firmware version for that device would be 6.3.
    Message was edited by: Bob Timmons

  • Hey, I have a AirPort Express Base Station ( 2nd Generation ), and I wanted to ask that if I join my network at home with the Express Station, will it still run the 2.5 GHz and the 5.0 GHz?

    Okay, well I have just bought a AirPort Express Base Station ( 2nd Generation ) and I'm new to it, but I wanted to ask that if it join's a network you have setup at home, will it still run with the 2.4 GHz and the 5.0 GHz.

    The AirPort Express will "extend" both the 2.4 GHz and 5 GHz networks and provide more wireless signal coverage when it is connected to another Apple AirPort router and configured correctly.
    The AirPort Express cannot provide more wireless coverage though, if you are trying to connect it to another 3rd party wireless router using wireless only.
    It should be possible to set up the Express to provide more signal coverage if you connect it back to the main router using a wired Ethernet connection or using Ethernet powerline adapters.

  • I have a 3GS phone that can no longer be upgraded on my Powerbook because it is ancient and can only run 10.4.11, consequently itunes will only upgrade to 9.2.1(4). Is there any way i can upgrade the phone so hereafter i will not need a computer to do it.

    I have a 3GS phone that can no longer be upgraded on my Powerbook because it is ancient and the os will only run 10.4.11, consequently iTunes will only upgrade to 9.2.1(4). Please don't answer that i need to upgrade the computer os because that has been a past nightmare i have been through too many times.
    Is there any way i can upgrade the phone w/o going to an apple store so hereafter w/ the upgrade to the new os (whenever that gets squared away), i will not need a computer to do it?
    Thanks in advance,
    don

    Solved my issue by setting up a new account on my daughter's computer. Not 100% solved, but i was able to get the update on my 3GS.
    don

  • I have a macbook pro 15" Retina Display with 2.6 ghz and 8gb of ram yet when i try to download a HD movie from itunes it says my computer doesn't support HD?

    i have a macbook pro 15" retina Display with 2.6 ghz and 8gb of ram when i try to download an HD movie from itunes it says my computer doesn't support HD? i went to the support on the apple website and looked at the specs that a computer has to meet in order to play HD movies and mine is well above them. Why can't i play the movies?

    That would at least partially explain it.
    These MacBook Pros drew more power than the power brick could readily supply, and so would only run at top speed when the power brick was supplemented by the battery.
    Though the applicable tech note has been removed, it stated:
    "If the battery is removed from a MacBook or MacBook Pro, the computer will automatically reduce the processor speed. This prevents the computer from shutting down if it demands more power than the A/C adapter alone can provide."

  • I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4).  We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine.

    I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4).  We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine. Which version of the utility will work on my MacBook, and still control the older Airport Extreme?

    if I update the Airport to the latest version, and "control" it with my MacBook Pro, will the older G4 still be able to use the signal from the new Airport?
    Yes. Your G4 shouldn't have any difficulty connecting to a Wi-Fi network provided by the latest 802.11ac AirPorts as they support the earlier radio modes that the G4 uses.

  • I have a Powerbook G4, an iPhone 4 and a new Macbook Pro. How do I get my iTunes library and apps from iPhone over to the new Macbook pro without losing anything?

    I have a Powerbook G4, an iPhone 4 and a new Macbook Pro. How do I get my iTunes library and apps from iPhone over to the new Macbook pro without losing anything?

    http://support.apple.com/kb/HT4527?viewlocale=en_US&locale=en_US

Maybe you are looking for

  • Setting Path variable in Win XP Pro

    Hello, I have installed Java SDK 1.3.0_02 on Windows XP professional. I have set my path to: %SystemRoot%\system32; %SystemRoot%; %SystemRoot%\system32\WBEM; %SystemRoot%; %SystemRoot%\system32\WBEM; C:\Program Files\Common Files\Adaptec Shared\Syste

  • Receiver mailadapter with mailpackage and attachment

    Hi there!! My scenario is as folows: I send via ABAP proxy an application XML and add additional plain text attachment to this. At the receiver side I use receiver mailadapter with mail-package. With my interface mapping I map application XML to mail

  • IPhoto & Skydrive

    Surprisingly this seems to work. I made a mirror image of my Skydrive folder on my iMac and mba. Within this folder, I had my photos and videos organized by date and event. I then created a new iPHoto library and added these files as albums. I then l

  • Error conecting oracle

    Enviroment: client Windows nt 4.0 Oracle EE 8.0.6 in hp-ux Oracle odbc driver 8.0.6.3 ASP we want to display a list of names...but it doesn't display an error message and the list is empty. Why? Thanks. code: ...<% dim conn dim rs Set con=Server.Crea

  • UPDATE FOR NOWAIT

    HI EVERY BODY SELECT sub_no, branch_no, semester_no, smtr_mark, final_mark, student_mark, student_no FROM student_subject_temp WHERE ROWID = :1 FOR UPDATE OF sub_no NOWAIT WHAT IS LAST LINE MEANS