Length error occurred during the IMPORT statement.

i have problem in Zprogram.its working fine in 4.6b ,but its problem in ECC5.0.its giving dump and saying
Error analysis                                                                     
   An exception occurred. This exception will be dealt with in more detail        
below. The exception, assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was 
not caught, which  led to a runtime error. The reason for this exception is:         
The system found when importing that the target object was longer or   
shorter than the object to be imported.

Hi Madhu,
Suggested to post this in logistics forum for better answer.
Software Logistics
Regards,
Debasis.

Similar Messages

  • Length error occurred during in IMPORT statement

    Dear Friends,
    (length error occurred during in IMPORT statement),when im using the SUBMIT syntax..can i know what is the reason.
    Thanks
    Rajkumar.A

    Hello,
    I would like to know how did you solve the issue as i came across the same issue.
    Thanks,
    FBK

  • Error Occurred During the import

    Hi friends,
    When i tried to import the sql file of my already build apex application into my work space, and at the time of installation it is returning error like
    Error     ERR-1029 Unable to store session info. session=1798024046224326 item=40006855470898
    ORA-02091: transaction rolled back ORA-02291: integrity constraint (APEX_040100.WWV_FLOW_PAGE_DA_A_AR_FK) violated - parent key not found
    OK     Suppose, if i tried to import that same application via back-end through Sql developer means then too im facing the same error like
    Error starting at line 231,323 in command:
    commit
    Error report:
    SQL Error: ORA-02091: transaction rolled back
    ORA-02291: integrity constraint (APEX_040100.WWV_FLOW_PAGE_DA_A_AR_FK) violated - parent key not found
    02091. 00000 -  "transaction rolled back"
    *Cause:    Also see error 2092. If the transaction is aborted at a remote
               site then you will only see 2091; if aborted at host then you will
               see 2092 and 2091.
    *Action:   Add rollback segment and retry the transaction.
    RollbackI dont know the reason behind this problem and what could be the problem. Because of that i couldn't import the application to my work space successfully.
    Brgds,
    Mini

    Hi Mini,
    Sorry you've hit this also. As described in Jitendra's linked thread and threads linked from that thread, this is caused by an inconsistent metadata state that can occur in dynamic actions in any version prior to 4.1.1. This was tracked with oracle bug ##1344144, and was fixed in 4.1.1, such that the inconsistent metadata state can no longer occur and that existing inconsistencies are corrected on upgrading or importing to 4.1.1.
    Were you able to resolve this as outlined in the linked thread, identifying the problematic DA's and resetting the affected element? Also, are you be able to import the application on apex.oracle.com (4.1.1) successfully?
    Regards,
    Anthony.

  • The import was stopped, an error occurred during the phase DDIC_ACTIVATION

    Dear all,
    When I import the SAP_BASIS support package SAPKB70019 , it appears the error as below :
    The import was stopped, since an error occurred during the phase
    DDIC_ACTIVATION, which the Support Package Manager is unable to resolve
    without your input.
    After you have corrected the cause of the error, continue with the
    import by choosing Support Package -> Import queue from the initial
    screen of the Support Package Manager.
    The following details help you to analyze the problem:
         -   Error in phase: DDIC_ACTIVATION
         -   Reason for error: TP_STEP_FAILURE
         -   Return code: 0008
         -   Error message: OCS Package SAPKB70019, tp step A, return code
             0008
    Notes on phase DDIC_ACTIVATION
    In this phase the imported Dictionary objects are activated. This phase
    can terminate due to the following reasons:
    o   TP_INTERFACE_FAILURE: The tp interface could not be called.
    o   TP_FAILURE: The program tp could not be executed. For more
         information, see the SLOG or ALOG log file.
    o   TP_STEP_FAILURE: The tp step DDIC activation could not be performed
         successfully. To see the cause of the error in the activation log,
         choose  Goto -> Log -> Queue.
         If you import two or more Support Packages in one queue, and you do
         not activate them in the correct sequence, activation errors may
         occur. In this case, the activation errors disappear when you repeat
         the activation run. To do this, choose Support Package -> Import
         Support Package Queue.
        A prerequisite of the Support Package Manager is that the Change and
        Transport System (CTS) is configured correctly. For more detailed
        information, read the online documentation available from Help -> SAP
        Library -> mySAP Technology Components -> SAP Web Application Server ->
        Change and Transport System .
        A list of the most important SAP Notes for Online Correction Support
        (OCS) is available in SAP Note 97620, which is updated regularly.
    I have used se11 to avtive the domain SEFS_CRAWL_ALGORITHM , but the error still exist.
    Hope anyone can help. Thanks!
    B.R
    Michael

    P762713 wrote:>
    > Hi ,
    >
    >     This is general issue now a days occuring in Support Packs .The only solution for this issue is to delete structure ::
    >
    > these were the structure deleted from system afterwards patches were installed successfully.
    >
    > /1PYXXFO/SAP_PAYSLIP_____L0001
    > /1PYXXFO/SAP_PAYSLIP_____T0001
    > /1PYXXFO/SAP_PAYSLIP
    >
    > /1PYXXFO/SAP_PAYSLIP_____L0020
    > /1PYXXFO/SAP_PAYSLIP_____T0020
    >
    > You can do this via Tcode se11 .give these info in data type & in turn you have to delete 1PYXXFO/SAP_PAYSLIP also.This has solved my issue & after this support pack went fine.
    >
    > Thanks..
    > Mohit
    >
    > Edited by: mohit gupta on Sep 23, 2009 9:15 AM
    Hi, mohit
          I have tried to use the t-code se11 to delete the structures, but the system telled me that they are all not exist .
    A part of the queue log as below:
       Field name KEY is reserved (Do not use structure as include in DB table)
       Field name PRIOR is reserved (Do not use structure as include in DB table)
       Field KEY: Component type or domain used not active or does not exist
       Exactly one field SPRAS of type LANG: Selection as text language possible
      Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0001 cannot be generated
       Enhancement category for table missing
       Enhancement category for include or subtype missing
       Field name KEY is reserved (Do not use structure as include in DB table)
       Field name PRIOR is reserved (Do not use structure as include in DB table)
       Field KEY: Component type or domain used not active or does not exist
       Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0020 cannot be generated
       Enhancement category for table missing
       Enhancement category for include or subtype missing
       Field name KEY is reserved (Do not use structure as include in DB table)
       Field name PRIOR is reserved (Do not use structure as include in DB table)
       Exactly one field SPRAS of type LANG: Selection as text language possible
       Enhancement category for table missing
    who can help me ?
    thank you very much
    BR.
    Michael
    Edited by: Michael Hong on Sep 23, 2009 12:36 PM

  • System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).

    I have been trying to install a piece of software on 2 Windows 7 PCS called Rightfax...during installing I get the error below;
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
    It then gives me an error log of ;
    2015-04-23 14:43:03Z: Error: Unexpected problem occurred in task worker
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
    2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
              at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
              at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
              at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
              at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    2015-04-23 14:43:03Z: Info: Page changed from 'WizardWorkerPage' to 'ResultPage' driven by result 'Next' and exception 'none'
    2015-04-23 14:44:06Z: Info: Page changed from 'ResultPage' to 'none' driven by result 'Next' and exception 'none'
    2015-04-23 14:44:06Z: Info: Work has not been completed; install state will not be saved.
    2015-04-23 14:44:06Z: Info: Reboot status = NotRequired
    2015-04-23 14:44:06Z: Info: Exitcode = 0
    2015-04-23 14:44:06Z: Info: Logging ended.
    I have installed this software succesfully on other machines previously.....

    Hi RyanWelsh78,
    This forum is discussing about Visual Stuido Tools for Office developing, your issue is related with the installing Rightfax add-in which is a third party product. As the reply from Eugene, you could contact Rightfax add-in developers for help.
    Thanks for your understanding.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80070003.

    I received the above error reinstalling SQL Server 2008.  I have tried all suggestions.  This error also appears when I install any version of SQL Server.
    I have also installed;
    Microsoft® .NET Framework Version 2.0.50727.4927
    Microsoft® .NET Framework Version 4.0.31106.0
    Microsoft® .NET Framework Version 3.0.6920.50
    Microsoft Visual C++ 2005 Redistributable (x64) 8.0.59192
    Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
    Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
    Microsoft Visual C++ 2010 x64 Redistributable 10.0.40219
    Microsoft Visual C++ 2010 x86 Redistributable 10.0.40219
    Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
    Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
    Overall summary:
      Final result:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
    rerun SQL Server Setup.
      Exit code (Decimal):           -2068052081
      Exit facility code:            1212
      Exit error code:               1935
      Exit message:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
    rerun SQL Server Setup.
      Start time:                    2014-02-23 19:17:20
      End time:                      2014-02-23 19:21:35
      Requested action:              Install
      Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SqlSupport_KatmaiRTM_Cpu64_1.log
      Exception help link:           http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
    Machine Properties:
      Machine name:                  OHPC
      Machine processor count:       2
      OS version:                    Windows 7
      OS service pack:               Service Pack 1
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                   
    Feature                                  Language            
    Edition              Version         Clustered
    Package properties:
      Description:                   SQL Server Database Services 2008 R2
      ProductName:                   SQL Server 2008 R2
      Type:                          RTM
      Version:                       10
      SPLevel:                       0
      Installation location:         H:\SQLServer2008R2_SP1\x64\setup\
      Installation edition:          DEVELOPER
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      False
      AGTSVCACCOUNT:                 NT AUTHORITY\SYSTEM
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Manual
      ASBACKUPDIR:                   Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   Config
      ASDATADIR:                     Data
      ASDOMAINGROUP:                 <empty>
      ASLOGDIR:                      Log
      ASPROVIDERMSOLAP:              1
      ASSVCACCOUNT:                  <empty>
      ASSVCPASSWORD:                 *****
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            <empty>
      ASTEMPDIR:                     Temp
      BROWSERSVCSTARTUPTYPE:         Disabled
      CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
      CUSOURCE:                      
      ENABLERANU:                    False
      ENU:                           True
      ERRORREPORTING:                False
      FARMACCOUNT:                   <empty>
      FARMADMINPORT:                 0
      FARMPASSWORD:                  *****
      FEATURES:                      SQLENGINE
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  <empty>
      FTSVCPASSWORD:                 *****
      HELP:                          False
      IACCEPTSQLSERVERLICENSETERMS:  False
      INDICATEPROGRESS:              False
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    MSSQLSERVER
      INSTANCENAME:                  MSSQLSERVER
      ISSVCACCOUNT:                  NT AUTHORITY\NetworkService
      ISSVCPASSWORD:                 *****
      ISSVCSTARTUPTYPE:              Automatic
      NPENABLED:                     0
      PASSPHRASE:                    *****
      PCUSOURCE:                     
      PID:                           *****
      QUIET:                         False
      QUIETSIMPLE:                   False
      ROLE:                          <empty>
      RSINSTALLMODE:                 FilesOnlyMode
      RSSVCACCOUNT:                  <empty>
      RSSVCPASSWORD:                 *****
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         *****
      SECURITYMODE:                  <empty>
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
      SQLSVCACCOUNT:                 NT AUTHORITY\SYSTEM
      SQLSVCPASSWORD:                *****
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           OHPC\Robert
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  True
      TCPENABLED:                    0
      UIMODE:                        Normal
      X86:                           False
      Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
    Detailed results:
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SystemConfigurationCheck_Report.htm
    SFC/ Scannow
    2014-02-23 19:08:22, Info                  CSI    0000016f [SR] Verifying 100 (0x0000000000000064) components
    2014-02-23 19:08:22, Info                  CSI    00000170 [SR] Beginning Verify and Repair transaction
    2014-02-23 19:08:23, Info                  CSI    00000172 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
    Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:08:23, Info                  CSI    00000174 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:08:26, Info                  CSI    00000176 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
    Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:08:26, Info                  CSI    00000177 [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
    2014-02-23 19:08:26, Info                  CSI    00000179 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
    source file in store is also corrupted
    2014-02-23 19:08:27, Info                  CSI    0000017c [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:08:27, Info                  CSI    0000017d [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
    2014-02-23 19:08:27, Info                  CSI    00000180 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
    source file in store is also corrupted
    2014-02-23 19:08:27, Info                  CSI    00000182 [SR] Verify complete
    2014-02-23 19:12:33, Info                  CSI    00000326 [SR] Verifying 100 (0x0000000000000064) components
    2014-02-23 19:12:33, Info                  CSI    00000327 [SR] Beginning Verify and Repair transaction
    2014-02-23 19:12:33, Info                  CSI    00000329 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:12:35, Info                  CSI    0000032b [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:12:35, Info                  CSI    0000032c [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
    2014-02-23 19:12:35, Info                  CSI    0000032f [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
    source file in store is also corrupted
    2014-02-23 19:12:36, Info                  CSI    00000331 [SR] Verify complete
    2014-02-23 19:13:14, Info                  CSI    0000035d [SR] Repairing 3 components
    2014-02-23 19:13:14, Info                  CSI    0000035e [SR] Beginning Verify and Repair transaction
    2014-02-23 19:13:14, Info                  CSI    00000360 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
    Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:14, Info                  CSI    00000362 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:14, Info                  CSI    00000364 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:14, Info                  CSI    00000366 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:14, Info                  CSI    00000367 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
    2014-02-23 19:13:15, Info                  CSI    0000036a [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
    source file in store is also corrupted
    2014-02-23 19:13:15, Info                  CSI    0000036c [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
    Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:15, Info                  CSI    0000036d [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
    2014-02-23 19:13:15, Info                  CSI    0000036f [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
    source file in store is also corrupted
    2014-02-23 19:13:15, Info                  CSI    00000371 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:15, Info                  CSI    00000372 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
    2014-02-23 19:13:15, Info                  CSI    00000375 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
    source file in store is also corrupted
    2014-02-23 19:13:15, Info                  CSI    00000377 [SR] Repair complete
    2014-02-23 19:13:15, Info                  CSI    00000378 [SR] Committing transaction
    2014-02-23 19:13:15, Info                  CSI    0000037c [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction 
    have been successfully repaired

    Summary:
    Attempted proposed solution.  Error still appears.
    This is installed:
    Microsoft Visual C++ 2005 ATL Update kb973923 - x86 8.0.50727.4053
    Microsoft Visual C++ 2005 Redistributable               8.0.56336
    Microsoft Visual C++ 2005 Redistributable (x64)         8.0.59192
    Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
    Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
    Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
    Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
    Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
    Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
    I reinstalled:
    vcredist_x64 Microsoft Visual C++ 2005 SP1 Redistributable Package (x64) .exe
    vcredist_x86 Microsoft Visual C++ 2005 SP1 Redistributable Package (x86).exe
    Results:
    Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable (x64). Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft
    Corporation. Reconfiguration success or error status: 0.
    Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable. Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft Corporation.
    Reconfiguration success or error status: 0.
    I installed SQLServer2008R2_SP1
    Same error message came up;
    SqlSupport_KatmaiRTM_Cpu64_1.log
    MSI (s) (64:94) [23:03:43:910]: Source for file 'pfbafgaq.dll' is uncompressed, at 'H:\SQLServer2008R2_SP1\1033_ENU_LP\x64\setup\sql2008support\PFiles\SqlServr\100\Setup\Release\x64\'.
    MSI (s) (64:94) [23:03:43:926]: Executing op: SetTargetFolder(Folder=C:\Windows\winsxs\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.1833_none_8a17faaf2edd3e00\)
    MSI (s) (64:94) [23:03:43:926]: Executing op: SetSourceFolder(Folder=1\Windows\winsxs\nvdlei3o.taa\)
    MSI (s) (64:94) [23:03:43:926]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
    C8B3B9A1E18E},ComponentVersion=8.0.50727.1833,ProductCode={B40EE88B-400A-4266-A17B-
    E3DE64E94431},ProductVersion=10.1.2731,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
    MSI (s) (64:94) [23:03:43:941]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
    3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
    C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={071c9b48-7c32-4621-a0ac-
    3f809523288f},ProductVersion=8.0.56336,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
    MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
    ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
    ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
    3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
    26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
    C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={D40172D6-CE2D-4B72-BF5F-
    26A04A900B7B},ProductVersion=11.0.0,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
    MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
    ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
    ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
    26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:972]: Executing op: AssemblyCopy(SourceName=uvdlei3o.taa|
    ATL80.dll,SourceCabKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,DestName=ATL80.dll,Attributes=0,FileSize=113152,PerTick=65536,,VerifyMedia=1,ElevateFlags=4,,,,ComponentId=
    {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E},,,,AssemblyMode=0,)
    MSI (s) (64:94) [23:03:43:972]: Assembly Error:The system cannot find the path specified.
    MSI (s) (64:94) [23:03:43:972]: Note: 1: 1935 2: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E} 3: 0x80070003 4: IAssemblyCache 5: CreateAssemblyCacheItem 6:
    Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"
    MSI (s) (64:94) [23:03:43:972]: Assembly Error (sxs): Please look into Component Based Servicing Log located at -169675656ndir\logs\cbs\cbs.log to get more diagnostic information.
    MSI (s) (64:94) [23:03:49:882]: Product: Microsoft SQL Server 2008 Setup Support Files  -- Error 1935. An error occurred during the installation of assembly
    'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
    HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
    Error 1935. An error occurred during the installation of assembly
    'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
    HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
    MSI (s) (64:94) [23:03:49:882]: User policy value 'DisableRollback' is 0
    Thanks, Ted U

  • Error occurred during the phase IMPORT_PROPER

    Hi All,
    We are currently installing Add-on ST-PI Rel.2008_1_620 SAPKITLRBA, and the corresponding 3 support packages SAPKITLRB1 to SAPKITLRB3, in one of the quality systems. However, an error is encountered during the installation which is as follows:
    The installation was stopped, since an error occurred during the phase
    IMPORT_PROPER, which the Add-On Installation Tool is unable to resolve
    without your input.
    After you have corrected the cause of the error, continue with the
    import by choosing Continue in the queue display.
    The following details help you to analyze the problem:
        -   Error in phase: IMPORT_PROPER
        -   Reason for error: TP_BUFFER_INCONSISTENCY
        -   Return code: 0008
        -   Error message: Pkgs. in queue don"t exist in the tp buffer (e.g.
            SAPKITLRBA)
    Also, below is the SLOG of the system:
    ERROR SAPKITLRBA ST6 I 0016 20110602203832 STPIUSER INUP
    cpafisr5 20110602203531
    STOP MAIN IMPORT ST6 I 20110602203833 INUP
    cpafisr5 20110602203531
    ERROR: stopping on error 16 during MAIN IMPORT
    STOP imp all ST6 0016 20110602203833 INUP
    cpafisr5 20110602203531
    START MAIN IMPORT ST6 I 20110602203943 INUP
    cpafisr5 20110602203943
    START TRANSMIT BUFFER ENTR ST6 g 20110602204020 INUP
    cpafist0
    STOP TRANSMIT BUFFER ENTR ST6 g 0000 20110602204020 INUP
    cpafist0
    START COMMIT BUFFER ENTRIE ST6 g 20110602204020 INUP
    cpafisk0
    HALT 20110602204020
    ERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not
    exist!
    ERROR: EXIT(16) -> process ID is: 10932
    WARNING: TA SAPKITLRB1 not found via index, reading whole buffer
    The same add-on and support packages we successfully installed in its respective developement system and in other systems as well.  However, request you all to kindly assist in resolving the error.
    Thanks in advance.
    Regards,
    Indraneel Upponi

    ERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not exist!
    Does this file exist on this location ? It seems buffer insoncistency from the error message.
    Regards,
    Subhash

  • Error 1935.An error occurred during the installation of assembly 'Microsoft.VC90.ATL or 'Microsoft.VC80.ATL'

    The OS is Windows Server 2008 R2
    I can't install any programs (like backup agents) that require these components: 
    Microsoft Visual C++ 2005 SP1 Redistributable Package (x64) or the
    Microsoft Visual C++ 2008 SP1 Redistributable Package (x64)
    I've tried unregistering the Windows Installer and reregistering it, starting from a clean boot scenario,
    This is the error message:
    Product: Microsoft Visual C++ 2005 Redistributable (x64) -- Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.ATL,type="win32",version="8.0.50727.762",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64"'. Please
    refer to Help and Support for more information. HRESULT: 0x80070BC9. assembly interface: IAssemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
    Seems like there are thousands of entries when you google this error but not too many solutions.
    The only microsoft support KB entry that deals with this error only is for Windows 7, so the Fix It tool can't be run:
    http://support.microsoft.com/kb/970652

    Hi All
    I have the Same_D_n_Problem.... However, I WAS able to download and install the VC++ 2005 Redist x_64 after removing the one that was there.... Didn't help :(
    Tried removing, then installing using a CleanBoot - no luck
    REinstalled VC++2005 Redist. No problem but cannot install SQL 2008 R2
    Soooo... have traced the SQL Installer log file - and one can get to the entry by searching for 1935 - then looked back for what I think is the begining of the problem - I have marked this with ********************* here is the LogFile excerpt:
    2010-12-29 22:08:59 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\Services\SSIS Server - OK.
    2010-12-29 22:08:59 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\SqlUA - OK.
    2010-12-29 22:08:59 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\SqlUA\CurrentVersion - OK.
    2010-12-29 22:08:59 Slp: ------------------------------------------------------------
    2010-12-29 22:08:59 Slp: D:\SQLInstal\x64\FixSqlRegistryKey_x86.exe exit code: 0
    2010-12-29 22:08:59 Slp: Completed Action: FixSqlRegistryKey, returned True
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: PostMsiTimingConfigAction
    2010-12-29 22:08:59 Slp: The object state property 'workflow' is null/empty. *********************
    2010-12-29 22:08:59 Slp: Error: Action "PostMsiTimingConfigAction" failed during execution.
    2010-12-29 22:08:59 Slp: Completed Action: PostMsiTimingConfigAction, returned False
    2010-12-29 22:08:59 Slp: Completed Action: ExecuteStandardTimingsWorkflow, returned True
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: ExecuteCloseWorkflow
    2010-12-29 22:08:59 Slp: Workflow to execute: 'CLOSE'
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Skipping Action: ProduceStatusLogs
    2010-12-29 22:08:59 Slp: Action is being skipped due to the following restrictions:
    2010-12-29 22:08:59 Slp: Condition "Is the datastore flag /Scenario/GlobalFlags/AreProductFeaturesSupported set" did not pass as it returned false and true was expected.
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: FinalizeProgressStatus
    2010-12-29 22:08:59 Slp: Completed Action: FinalizeProgressStatus, returned True
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: RebootMessageAction
    2010-12-29 22:08:59 Slp: Completed Action: RebootMessageAction, returned True
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Skipping Action: FinishPage
    2010-12-29 22:08:59 Slp: Action is being skipped due to the following restrictions:
    2010-12-29 22:08:59 Slp: Condition "Is the user's scenario set to EditionUpgrade" did not pass as it returned false and true was expected.
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Skipping property RequireMode of class: StopAction
    2010-12-29 22:08:59 Slp: Input of property will not be set due to the following failed restriction(s):
    2010-12-29 22:08:59 Slp: Condition "Is the user's scenario set to ComponentUpdate" did not pass as it returned true and false was expected.
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: CloseUI
    2010-12-29 22:08:59 Slp: Stop Action
    2010-12-29 22:08:59 Slp: Completed Action: CloseUI, returned True
    2010-12-29 22:08:59 Slp: Completed Action: ExecuteCloseWorkflow, returned True
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: PassPidBackFromComponentUpdate
    2010-12-29 22:08:59 Slp: Pass the flag CuPidDisplayed to the main setup
    2010-12-29 22:08:59 Slp: ENU value specified, trying to pass the value to main setup
    2010-12-29 22:08:59 Slp: PID value specified, trying to pass the value to main setup
    2010-12-29 22:08:59 Slp: SQMREPORTING value is specified in CU workflow, trying to pass the value to main setup
    2010-12-29 22:08:59 Slp: Completed Action: PassPidBackFromComponentUpdate, returned True
    2010-12-29 22:08:59 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
    2010-12-29 22:08:59 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\100
    2010-12-29 22:08:59 Slp: Sco: Attempting to get registry value CustomerFeedback
    2010-12-29 22:09:00 Slp:
    2010-12-29 22:09:00 Slp:
    2010-12-29 22:09:00 Slp: ----------------------------------------------------------------------
    2010-12-29 22:09:00 Slp:
    2010-12-29 22:09:00 Slp: Error result: -2068052081
    2010-12-29 22:09:00 Slp: Result facility code: 1212
    2010-12-29 22:09:00 Slp: Result error code: 1935
    2010-12-29 22:09:00 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
    2010-12-29 22:09:00 Slp: Sco: Attempting to open registry subkey
    2010-12-29 22:09:00 Slp: Sco: Attempting to open registry subkey Software\Microsoft\PCHealth\ErrorReporting\DW\Installed
    2010-12-29 22:09:00 Slp: Sco: Attempting to get registry value DW0201
    2010-12-29 22:09:22 Slp: Submitted 1 of 1 failures to the Watson data repository
    2010-12-29 22:09:22 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
    2010-12-29 22:09:22 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\100
    2010-12-29 22:09:22 Slp: Sco: Attempting to get registry value CustomerFeedback
    Would be great to hear others' thoughts on this
    Cheers
    Martin

  • An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP).

    Hello everyone:
    I know this question have been asked in these forums quite a few times. I apologize if it is a repeat telecast but I was not able to find a suitable solution pertaining to my problem.
    I have a AP/SM setup that is configured to get EAP-PEAP authentication from Windows 2012 Server. I have setup everything and have verified that the EAP-PEAP authentication works fine on AP/SM by getting authentication from FreeRADIUS server. Now, when I try
    to get authentication from Windows Server, I am getting a reject. The Event log shows this generic message:
    Reason Code: 23
    Reason:
        An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP). Check EAP log files for EAP errors.
    There is nothing in the EAP logs that is obvious too:
    "USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
    07/11/2014 00:05:57 4927",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
    "USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4927",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
    "USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
    07/11/2014 00:05:57 4928",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
    "USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4928",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
    "USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,11,"PEAP_TEST",0,"311 1 10.120.133.1
    07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
    "USIL01PMPTST01","IAS",07/11/2014,11:59:44,3,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,11,"PEAP_TEST",23,"311 1 10.120.133.1 07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
    So, basically, the sequence is this:
    request , challenge, request , challenge, request, reject
    Any idea what might be happening?
    Thank you.

    Hi,
    Have you installed certificates on the NPS server properly? Have you selected the proper certificate in the properties of PEAP?
    Here is an article about the Certificate requirements of PEAP,
    Certificate requirements when you use EAP-TLS or PEAP with EAP-TLS
    http://support.microsoft.com/kb/814394
    If your certificate matches the requirement, you may try to reinstall the certificate by export and import.
    To export a certificate, please follow the steps below,
    Open the Certificates snap-in for a user, computer, or service.
    In the console tree under the logical store that contains the certificate to export, click
    Certificates.
    In the details pane, click the certificate that you want to export.
    On the Action menu, point to
    All Tasks, and then click Export.
    In the Certificate Export Wizard, click No, do not export the private key. (This option will appear only if the private key is marked as exportable and you have access to the private key.)
    Provide the following information in the Certificate Export Wizard:
    Click the file format that you want to use to store the exported certificate: a DER-encoded file, a Base64-encoded file, or a PKCS #7 file.
    If you are exporting the certificate to a PKCS #7 file, you also have the option to include all certificates in the certification path.
    If required, in Password, type a password to encrypt the private key you are exporting. In
    Confirm password, type the same password again, and then click
    Next.
    In File name, type a file name and path for the PKCS #7 file that will store the exported certificate and private key. Click
    Next, and then click Finish.
    To import a certificate, please follow the steps below,
    Open the Certificates snap-in for a user, computer, or service.
    In the console tree, click the logical store where you want to import the certificate.
    On the Action menu, point to
    All Tasks, and then click Import to start the Certificate Import Wizard.
    Type the file name containing the certificate to be imported. (You can also click
    Browse and navigate to the file.)
    If it is a PKCS #12 file, do the following:
    Type the password used to encrypt the private key.
    (Optional) If you want to be able to use strong private key protection, select the
    Enable strong private key protection check box.
    (Optional) If you want to back up or transport your keys at a later time, select the
    Mark key as exportable check box.
    Do one of the following:
    If the certificate should be automatically placed in a certificate store based on the type of certificate, click
    Automatically select the certificate store based on the type of certificate.
    If you want to specify where the certificate is stored, select
    Place all certificates in the following store, click
    Browse, and choose the certificate store to use.
    If issue persists, you may try to re-issue the certificate.
    For detailed procedure, you may refer to the similar threads below,
    Having issues getting PEAP with EAP-MSCHAP v2 working on Windows 2008 R2
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/c66cf0a8-24dd-4ccd-b5bb-16bd28ad8d4c/having-issues-getting-peap-with-eapmschap-v2-working-on-windows-2008-r2?forum=winserverNAP
    Hope this helps.
    Steven Lee
    TechNet Community Support

  • Adobe Reader X (10.1.2) - An error occured during the installation of assembly component

    Hi there everyone,
    more or less is was forced to format and reset my system by today and one of the first programms i tried to re-install after my WIn 7 64 bit was back in action was Adobe Reader X. Unfortunately the following error occures during the installation (by the web installer and also by the 52MB stand alone installer). Maybe the installer requires some other tools, runtimes or something else to be installed to go on ahead with the adobe installation but I'm not quite sure.
    I would be very happy if someone could help me.

    The Problem solved itself meanwhile. After installing Windows 7 it was automatically loading the 71 last important updates from the Microsoft site and I didn't restart the system after installing all those updates (~270MB).
    After rebooting the system the Adobe Reader installed easily. Thanks for your help dude and your advice "restarting windows" was the right answer anyway. : o)
    Kind Regards,
    Schnörgel

  • Activating 0FI_AP_50 - RSA3 "Errors occurred during the extraction" Message no. RJ012

    Hi-
    I am trying to activate Data Source 0FI_AP_50, however, I noticed on the BW side when I tried to pull in data nothing would come back.  I stated tracing backwards and looked at Extraction via RSA3 in source system.  At that time I received the error: "Errors occurred during the extraction" Message no. RJ012.  The data source is active and data is available in the corresponding tables.
    Any suggestions?
    Thanks,
    Mark

    Hi Mark,
    Unfortunately I do not have SAP_ALL in my system for me. But as far as I remember you should follow below path:
    Goto Tcode SFW5:
    Expand second node - scroll down and choose ENTERPRISE_BUSINESS_FUNCTIONS - FIN_REP_SIMPL_1 - Reporting Financials - check it and Activate changes
    Then you might have to relogin again.
    One more important thing: try this in Development System only first. Also really important to contact your FI team for impact analysis.
    As far as I know these business functions are not possible to revert back
    Thanks
    Amit

  • I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".

    I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error   "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""

    Repair your Apple Application Support.
    Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

  • Problem: An error occured during the uploading process.

    Hello!  I've searched around but I am having difficulty finding a solution to this problem.
    I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab.  This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process.  Please try again later."  However, it eventually started working.  It is now a few weeks later, and I am having the very same issue.  I am unable to upload to YouTube or any other service through the Share tab.  Even loading the software itself, the opening splash screen is unable to grab my Adobe ID.  It never stops "Gathering User Info..."
    Steps I have tried:
    Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
    Checked router settings.
    Enabled DMZ on router and linked it to this specific computer.
    Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
    I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software.  This has continued to baffle me though, and finding help is difficult.  Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
    I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video.  The YouTube HD setting has been great for me in the past, as files are small but still look great online.  I would really like to get it working again, both for ease and convenience for simple projects.
    If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice.  In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
    I don't believe it matters in this situation, but just in case:
    Windows 7
    AMD Phenom II X4 820 - 2.80 GHz
    6 GB RAM
    Radeon HD 5880 1GB
    Connecting through a Netgear WNDR3400 router, standard DSL connection.

    Sorry, not seeing where to edit my original post.
    Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser.  So I am not being blocked somehow to those particular sites.  It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
    Additionally, the only virus software running is Microsoft Security Essentials.  It has never raised a flag before with this software or caused interference in the past.  I do not use Norton or any other service which are known to interfere with programs often.
    Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine.  As you can see in this image though, it cannot seem to ever connect and grab my user information.
    http://i.imgur.com/S53xN.png

  • Cannot install itunes, I keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and

    Cannot install itunes, I keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and

    Repair your Apple Application Support.
    Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

  • Cannot install itunes 10.6 to my windows 7 computer. Have tried several times, completely unistalled several times, all with same result. Error message that starts "An error occurred during the installation of assembly 'Microsoft VC80 CRT. type="win 32"

    Keep getting the following error message when I try to instal itunes 10.6.  An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win 32". version = "8.0 50727.61 95". public Key token = ""1fc8b3b9a1e18e3b." processor architeture = "x86". Please refer to help and support for more information.
    HRESULT:0x80073712
    The program then acts like it is still trying to load, but then I get another message later which reads:
    Service 'Aple Mobile Device' failed to start. verify that you have sufficient privileges to start system services.
    any suggestions?

    HRESULT: 0x80073712
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80073712, or some other number? (If they're another number, what number are you getting?)

Maybe you are looking for