Length of Burn longer than shown on time line in FCP 4.5 HD

Have an 8 minute-30 second movie. When I send it to compressor then to DVD Pro 3 it burns at 41 minutes and 15 seconds and takes about 3 and a 1/2 hours
to burn. The time line in FCP 4.5 HD shows ,as stated 8' 30". When the disc is played back it goes to black after the 8'30" movie but continues to run out to 41'-15". Help is greatly appreciated.

Check your FCP timeline and that you do not have any stray clips past the 8:30
Or just mark 8:30 as out point, export as self contained using In/Out points and encode that - but I would bet there is something in the timeline in FCP

Similar Messages

  • Break is longer than total working time in shift in OP36

    Dear all,
        When I am creating default capacity with t code OP36, the system gives me message "Break is longer than total working time in shift." Why is this happening as I enter start time, finish time and length of breaks as 07:30:00, 16:00:00, 00:45:00 resp. Pl give ur valuable in puts.

    Hi
    This message will be displayed if you specify only start, finish and break times without value in Capacity utilization.
    You will not get that message if you specify capacity utilization. Specify 100 there if that capacity utilization rate is 100%
    Regards,
    Krishna Mohan

  • Cloud and PS Touch - longer than the free time?

    Hi,
    i couldn´t find anything about it, so i just want to use PS Touch on my Nexus tablet. So i have to register to the cloud, but do i have to pay for it or can i use PS Touch longer than the 30-free days?
    thx for ur answers.
    Greetings

    Thanks thats all i wanted to know so then i will try PS Touch

  • Burning a portion of the "Time Line" in Premiere Elements 3.0

    Does anyone know how to burn only a portion of the "Time Line" in Premiere Elements 3.0 to a DVD?
    Thanks,  Larry

    Some Share options allow you to output only a portion of your project.
    Unfortunately, you can't do this with a DVD. You always get the entire timeline.
    However, an easy solution would be to Share to your Personal Computer as a DV-AVI. Open a new project, place your AVI on the timeline and trim it so that only the portion you want to included is on the timeline -- and then burn your DVD from that.

  • Time line in FCP X 10.1 is really slow

    Everything in FCP X 10.1 is working well... except the time line. When scrolling left, right or up and down I get the color wheel and it moves way after I've scrolled. Is any one having this problem. I've just reinstalled it and got rid of the preference files but to no avail. You're help would be greatly appreciated. If there is nothing that can be done... then Apple has to fix this situation. Thank you.

    I am having the same exact problem. Scrolling right or left is "glitchy" if you will. Render times are excellent. I've tried Original, Optimized and Proxy. Turned of Background rendering. Nothing helps. Very weird. 16gb of ram, checked activity monitor and its only using about 8 of the 16. What's happening?

  • Cancelling PeopleSoft job if running longer than max time

    We have some PeopleSoft jobs that we want Tidal to automatically cancel if they are still running after 2 hours, then automatically set the job to Completed Normally so the next job in the jobstream will start running.  We tried using a Job Event triggered by "Job running longer than its maximum time", with Selected Action = "Set To Completed Normally".  The problem is that it sets the job to completed normally on Tidal, but the job continues to run on PeopleSoft.  In other words, it's not cancelling the job.
    Next, we changed the Selected Action to "Cancel/Abort".  This worked in terms of cancelling the job on PeopleSoft, but we can't figure out how to automatically set the job to Completed Normally on Tidal after the job is cancelled.  There is an Event Trigger for "Operator cancelled the job", but apparently the event isn't triggered if Tidal cancels the job.  We also tried using Event Trigger = "Job completed", but that didn't work either since apparently Tidal doesn't consider a job in Aborted status as completed.
    Anyone have any other ideas on how to automatically cancel a PeopleSoft job and then automatically set the Tidal job to Completed Normally?  Thanks.

    Hello Richard,
    I would use the sacmd (windows) or the tesmcmd(Unix) to interact with the given job so to set it to whatever status you want ;
    - You have to first let the event Cancel/Abort it if running longer than expected by using the built in function (Cancel)
    - Then using the same event you need to trigger another job action that has the above tesmcmd command to set the job to Normally completed; for this you may need to create a new job that calls the tesmcmd/sacmd and then use jobset command.
    now you need to create a job action that triggers that job which will allow you to override the command parameters especially the RunID of your failed job.. hope i was able to get it right unless if you already figured that out.
    -rami

  • Time Line Wont Export, general error

    I have a time line in FCP that is set for DV-NTSC that is about 5 hrs long with markers. I am exporting it Dv-NTSC, but it gives me a general error instead of finishing. I have no idea how long it takes to get to that point because I leave it over night. I set the computer to not go to sleep or power down during the process.

    Yeah, this problem is a bear to deal with.
    Last few times it happened to me, I managed to trace it to a single bad frame in one of my clips.
    Is your timeline rendered?
    If not, you should start there before trying to export.
    Narrow it down by rendering your timeline in chunks.
    If it's already rendered, and you get the error on export, try exporting chunks that you can stitch together later.
    Once you find the offending clip, opening it in Quicktime, re-exporting it and bringing in the new file usually fixes the problem.
    It's tedious and has the chance of eating up a lot of your day, but it's all I got.

  • Encore can't burn more than one DVD at a time: Sense Code 56400

    For a long time now I've been unable to burn multiple DVD's at a time. I burn more than one and I get an error and have to make a coaster out of yet another DVD
    I just upgraded to 24 gb of DDR3 PC 1600 RAM, I have an 6 Core Processor, I have 7.8 on everything accept my hard drive which is 7.0 out of 7.9 according to my Windows 7 Pro. 64 bit system.
    I have 2 different DVD burners, one is a blu-ray burner too. I have the same issues, only different error readings it seems, on both drives. The first drive didn't burn even one for some reason so I tried the second. The second drive would burned 3 and on the fourth I got the errors' which I've included screen shots of below. I was surprised I got through three before I got to this error. By the end of the week I have a large project I need to make 30 DVD's of. HELP!!!!!
    A long time ago on my older machine I had similar problems and I went through different drives and discs until I seemed to come up with the magic combination which seemed to be a Plextor burner and Verbatim. But, then i got a bad batch of verbatim and tried Maxell and used those successfully for a while. Right now I'm using what a friend gave me, TDK's. I'm wondering if that's what the problem is... HELP!!!!

    I have managed to get it to work consistently now. I just burned 20 DVD's without a problem.
    I tried everything you suggested except the imageburn software. I didn't like that site, I was too anxious to try and figure out where to download that software in the midst of all the advertisements on that site.
    After clearing out everything in startup and services except what I needed I still wasn't able to burn successfully. Finally I went and purchased some Verbatim DVD-R discs and wahlah! Actually, after the first try with the verbatim I had an error code when trying to burn with Encore. So, I created and image file as you suggested and then I used Cyberlink's Power2Go to burn the image file and from there on it seems everything is solid.
    I think the biggest problem was using TDK discs. I came to the realization a few years ago that certain disks are not as predictable as others and that verbatim and maxell seem to be the best. I did get one bad batch of verbatim though one time and that's when I switched to Maxell. My friend gave me 200 of the TDK's and I've been having problems ever since. But, I wasn't sure what it was exactly because he gave me those around the same time I rebuilt my system.
    I had also found the Plextor seems to be the best bet for burners. But, I had been using an HP one lately and thought maybe that was the problem. However, now it seems to be fine.
    I really don't know what fixed it. I mean, nothing definitely worked until I started using the Verbatim today. But, that first verbatim erroring perplexed me. I had done some other things too, like removed some programs, like a bunch of HP printer crap. I even removed my virus software, Window Security Essentials. I just reinstalled it so now I'm wondering if I can burn as consistently. I had seen somewhere where someone said they removed Windows' Defender to get theirs working.
    Anyways, I guess what I need to do is format my main hard drive, only put adobe stuff on it, and then take my old computer set it up for everything else. That'll probably be the best thing to do... If I have anymore problems like this I'm doing that right away!

  • Importing images and setting longer than 10:00 length

    Dear all, I have a very simple question. Whenever I import an image into my project, it is automatically set to length of 10:00. In the sequence viewer, I cannot drag it to make it longer than a certain length of time. So, I end up having to add several copy of the image.
    How can I make the image I import have a longer length?
    BTW, I am using this image as an overlay ontop of my video.

    Import of images is controlled by Final Cut Express>User Preferences>General Tab.
    Still/Freeze Duration can be set here to any duration you like.
    You should be able to double click your still in the Timeline, it opens in the Viewer. Adjust the duration in the Top Left Timecode box. If clips are either side of the still in the Timeline it may not work as there won't be enough room for the duration to be longer.
    Al

  • HT5521 I have a lightning to usb cable which is 2m in length.  Is there any known issues with trying to recharge an iPad 4 with this longer length.  It seems to me it is taking much longer than a 1m cord to recharge.

    I have a lightning to usb cable which is 2m in length.  Is there any known issues with trying to recharge an iPad 4 with this longer length?  It seems to me it is taking much longer than a 1m cord to recharge.

    Axel,
    I'm afraid a new SSD won't be different from your bad USB stick. I had similar issues over USB with both a (no-brand) stick and TWO 64gb Kingston SSDNow's (running Kubuntu 12.04 with Kernel 3.11, ia_64): it all runs exceptionally well (wanna know how it feels like booting in 5 sec?) for a few days - then suddenly you find yourself facing that dreaded (initramfs) prompt. You ask yourself: why? Did I upgrade grub lately? Did I upgrade the Kernel? I don't recall so. Ok, let's fix this... insert favorite live cd, boot, fsck...what???? THOUSANDS of errors??? Hundreds of files and directories corrupted, and the system is unusable - Reinstall everything from scratch onto another drive.
    Rinse and repeat: did this 3 times. Then I found this analysis:
    http://lkcl.net/reports/ssd_analysis.html
    I also suspect USB power interrupts more abruptly than SATA power, at shutdown - basically aggravating any power interruption damages. So now I'm going to:
    - buy an Intel S3500!
    - add commit=1 to my mount options in /etc/fstab
    - edit shutdown procedure to add a 5-10 sec pause after unmounting drives.
    Just my two cents.
    Andrea
    Last edited by andreius (2013-12-29 16:51:04)

  • I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time.

    I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time. I tried to restore my ipod and it didnt help.

    Ignore.  I figured it out:)

  • In Lion Apple's Mail sound works for about one half a day each time I close it and then open it but it lasts no longer than that

    In Lion Apple's Mail sound works for about one half a day each time I close it and then open it but it lasts no longer than that. What is the fix?

    Try disabling the IDLE switch in the account's Advanced preference panel.

  • MOSS 2007 Search - Crawling is taking longer than usual time since last month for same content sources

    Hi all,
    Off late we have discovered that content crawling is taking longer than expected also overlapping to next scheduled too. Literally no crawl logs seen for hours. No entry in crawl logs. Is there anyone out here having similar issue? Please share a solution
    if any found.
    My farm is implemented with MOSS 2007 SP2 Ver no 12.0.0.6554
    There is not packet drop between index server, App and SQL server/Cluster
    Thank you in advance,
    Reach Ram
    Ramakrishna Pulipati SharePoint Consultant, Bangalore, INDIA

    I believe this is ready for submission for the Time Machine forum.
    As noted, it does not cover diagnosis and correction of specific problems or errors, as that would seem to be better handled separately.
    It also doesn't cover anything about Time Capsule, for the very good reason that I'm not familiar with them. If someone wants to draft a separate post for it, or items to add/update here, that would be great!
    Thanks very much.

  • Token longer than max allowable length of 258 chars

    Hi all,
    i tried to apply a sql case statement in sql loader control file in " " the load succeed with 258 chars case or decode statement but when i add more cases it return
    sql loader 350 token longer than max
    LOAD DATA
    INFILE 'F:\Vou\vou20110613_102_951454.unl'
    BADFILE 'F:\Vou\vou.pad'
    DISCARDFILE 'F:\Vou\vou.dic'
    replace
    INTO TABLE vou_test_2
    FIELDS TERMINATED BY '|'
    TRAILING NULLCOLS
    (SERIALNO,TIMESTAMP "to_date(:TIMESTAMP,'yy/mm/dd hh24:mi:ss')",BRANDID,SUBCOSID,CHARGINGPARTYNUMBER,PAYTYPE,VOUCHERPINNUMBER,VOUCHERBATCHNUMBER,VOUCHERSEQUENCE,VOUCHERCOSID,VOUCHERSPID,CARDFACEVALUE,CARDVALUEADDED,CARDVALIDITYADDED,TRADETIME "to_date(:TRADETIME,'yy/mm/dd hh24:mi:ss')",OPERATEDBY,THIRDPARTYNUMBER,ACCESSMETHOD,TRADETYPE,RECHARGEAREANUMBER,TRANSITIONID,VOUCHERENCRYPTNUMBER,Location_Number,RESERVED2,RESERVED3,PRODUCTID,SERVICETYPE,OLDUSERSATE,CURRENTUSERSATE,PREVIOUSACTIVESTOP "to_date(:PREVIOUSACTIVESTOP,'yy/mm/dd hh24:mi:ss')",NEWACTIVESTOP "to_date(:NEWACTIVESTOP,'yy/mm/dd hh24:mi:ss')",SUSPENDSTOP "to_date(:SUSPENDSTOP,'yy/mm/dd hh24:mi:ss')",DISABLESTOP "to_date(:DISABLESTOP,'yy/mm/dd hh24:mi:ss')",VALIDITYADDED,REWARDCYCLES,REBATEPRODUCTID,BILLCYCLEID,SUBSCRIBERID,RESERVED4,RESULTCODE,ACCOUNTID,RECHARGETAX,RECHARGEPENALTY,CURRENCYCODE,RESERVED5,PREPAIDBALANCEBEFORE,RECHARGEFORPREPAID,PREPAIDBALANCE,POSTPAIDBALANCEBEFORE,RECHARGEFORPOSTPAID,POSTPAIDBALANCE,ACCOUNTTYPE1,REWARDAMOUNT1,CURRENTACCTAMOUNT1,ACCOUNTTYPE2,REWARDAMOUNT2,CURRENTACCTAMOUNT2,ACCOUNTTYPE3,REWARDAMOUNT3,CURRENTACCTAMOUNT3,ACCOUNTTYPE4,REWARDAMOUNT4,
    CURRENTACCTAMOUNT4,ACCOUNTTYPE5,REWARDAMOUNT5,CURRENTACCTAMOUNT5,ACCOUNTTYPE6,REWARDAMOUNT6,CURRENTACCTAMOUNT6,ACCOUNTTYPE7,REWARDAMOUNT7
    ,CURRENTACCTAMOUNT7,ACCOUNTTYPE8,REWARDAMOUNT8,CURRENTACCTAMOUNT8,ACCOUNTTYPE9,REWARDAMOUNT9,CURRENTACCTAMOUNT9,ACCOUNTTYPE10,REWARDAMOUNT10,
    CURRENTACCTAMOUNT10,BONUSVALIDITY1,BONUSVALIDITY2,BONUSVALIDITY3,BONUSVALIDITY4,BONUSVALIDITY5,BONUSVALIDITY6,BONUSVALIDITY7,BONUSVALIDITY8,
    BONUSVALIDITY9,BONUSVALIDITY10,PREVIOUSSUSPENDSTOP "to_date(:PREVIOUSSUSPENDSTOP,'yy/mm/dd hh24:mi:ss')",
    PREVIOUSDISABLESTOP "to_date(:PREVIOUSDISABLESTOP,'yy/mm/dd hh24:mi:ss')",AGENTNAME,ADDTIONALINFO,FILE_TIME,FILE_NAME,
    ODATE "SYSDATE",ACCOUNT_2001 "CASE WHEN:ACCOUNTTYPE1='2001'THEN :REWARDAMOUNT1 WHEN :ACCOUNTTYPE2='2001' THEN :REWARDAMOUNT2
    WHEN :ACCOUNTTYPE3='2001' THEN :REWARDAMOUNT3
    WHEN :ACCOUNTTYPE4='2001' THEN :REWARDAMOUNT4
    WHEN :ACCOUNTTYPE5='2001' THEN :REWARDAMOUNT5 END")
    the above one succeed when i edit the case statement as follow
    ACCOUNT_2001 "CASE WHEN:ACCOUNTTYPE1='2001'THEN :REWARDAMOUNT1 WHEN :ACCOUNTTYPE2='2001' THEN :REWARDAMOUNT2
    WHEN :ACCOUNTTYPE3='2001' THEN :REWARDAMOUNT3
    WHEN :ACCOUNTTYPE4='2001' THEN :REWARDAMOUNT4
    WHEN :ACCOUNTTYPE5='2001' THEN :REWARDAMOUNT5
    WHEN :ACCOUNTTYPE6='2001' THEN :REWARDAMOUNT6
    WHEN :ACCOUNTTYPE7='2001' THEN :REWARDAMOUNT7
    WHEN :ACCOUNTTYPE8='2001' THEN :REWARDAMOUNT8
    WHEN :ACCOUNTTYPE9='2001' THEN :REWARDAMOUNT9
    WHEN :ACCOUNTTYPE10='2001' THEN :REWARDAMOUNT10 END"
    i got the Error sql loader 350 token longer than max allowable length of 258 chars .
    note : i cant modify the table structure to shorten the column names .
    please help me ....
    thanlks
    Edited by: user7998081 on Jun 23, 2011 3:24 AM

    Ron Gittleman (guest) wrote:
    : In migrating a Sybase 11 database to Oracle 8.0.5, there's a
    : step toward the end of the data-moving endeavor in which a
    script
    : called genctl.scr is executed. This creates control files for
    : 'sqlload'. For one-third or so of the source tables (.dat
    files)
    : sqlload complains about the control file:
    : SQL*Loader-350: Syntax error at line 20.
    : Token longer than max allowable length of 258 chars
    : in_paid_period,15,6)

  • Why is my new iPad 3(32gb) taking a long time to download apps, much longer than my iPhone.

    My new iPad3 with wifi- is taking a really long time to download,much longer than my iPhone. Does anyone know what I can do?
    Or is that just normal.

    slow Internet connection.    

Maybe you are looking for