Length of cable from card to external hub

Is there anyone that can tell me how long the cable is from the card to the external I/O hub on the Audigy 4 Pro? Thanks.......Cleorich

I would assume the same!
You're welcome!

Similar Messages

Sound Blaster Audigy 2 ZS Platinum Pro, External hub is without power

This might be a tough one...
I'm hooking up my external hub for the first time since I've purchased the card (over .5 years ago). I've got the two huge cables (bound together) coming from my sound card to the external hub and, naturally, the black, green and orange cables coming from the sound card on into my S750 sub.
Am I missing some other cable that powers the external hub? Is it broken if I'm certain I have it connected properly, otherwise?
I'm pretty sure I've got the right sound card drivers (got them directly off the Creative website--lost my driver CD)... does this look right? (http://www.dieirl.com/temp/soundcard.jpg)

ufkaz wrote:
This might be a tough one...
I'm hooking up my external hub for the first time since I've purchased the card (over .5 years ago). I've got the two huge cables (bound together) coming from my sound card to the external hub and, naturally, the black, green and orange cables coming from the sound card on into my S750 sub.
Am I missing some other cable that powers the external hub? Is it broken if I'm certain I have it connected properly, otherwise?
I'm pretty sure I've got the right sound card drivers (got them directly off the Creative website--lost my driver CD)... does this look right? (http://www.dieirl.com/temp/soundcard.jpg)
Have you looked from the User's Guide --> is power cable connected too (one free floppy disc power connector).
jutapa

USING LONG ETHERNET CABLE FROM HUB TO VISION BOX

Hi, just ordered bt vision and wondered if anyone could tell me if it is ok to connect the hub to the vision box with a long Ethernet cable, 20m long. From the video clips on setting the system up they say if over 2 meters you must use power adaptors which uses your houses electrical ring main to send the signals. Do you lose picture signal or does it slow down connection to bt. Or do they give the power adaptors to make it easier for people so they don't have to run long Ethernet cables.
Many thanks
Solved!
Go to Solution.

Hi and welcome to the forum.
I also have an ethernet cable around 20m long and works ok, I think BT say the 2m rule so customers do not have long lengths of cable around their house, good old elf'nsafety.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

How to create Fixed Length Flat File from Open Hub in BI 7.0

My requirement is to produce a Fixed length Flat file by Open Hub destination. My Open Hub has four fields. Now the requirement is to create another extra field in Open Hub which will contain all of the four fields value. In addition to that the fields should be fixed length that means if for any field no value is there and the field length/type is CHAR4 then 4 spaces should be there as the field value. SO, basically the Open Hub output will be single field which will contain information of four fields.
How to get this using End Routine of Transformation (from DSO to Open Hub) ?

Hi,
You can map the four input fields to the new field in the Open Hub, and change rule type to "Routine".
For example, if your source fields are called "first", "second", "third" and "forth", the ABAP routine could be similar to:
DATA: l_t_1 TYPE C LENGTH 4,
      l_t_2 TYPE C LENGTH 4,
      l_t_3 TYPE C LENGTH 4,
      l_t_4 TYPE C LENGTH 4.
IF source_fields-first IS INITIAL.
l_t_1 = '    '.
else.
MOVE source_fields-first TO l_t_1.
endif.
IF source_fields-second IS INITIAL.
l_t_2 = '    '.
else.
MOVE source_fields-second TO l_t_2.
endif.
IF source_fields-third IS INITIAL.
l_t_3 = '    '.
else.
MOVE source_fields-third TO l_t_3.
endif.
IF source_fields-forth IS INITIAL.
l_t_4 = '    '.
else.
MOVE source_fields-forth TO l_t_4.
endif.
CONCATENATE l_t_1 l_t_2 l_t_3 l_t_4 into result.
In the example, the program uses four blank spaces if any of the fields has no value.
Additionally, if non-initial values in input fields could be shorter than 4 characters (if the input fields have no fixed length), you could use STRLEN to evaluate if it is necessary to add blank spaces to complete the fixed length of 4.
I hope this helps you.
Regards,
Maximiliano

Can I run a cat5 cable to a 4 port hub from a cisco router then connect one of the hub's output ports to an airport express to 'extend' my wireless range?

Can I run a cat5 cable to a 4 port hub from a cisco router then connect one of the hub's output ports to an airport express to 'extend' my wireless range?
Flow would be
Cable modem---->cisco e2000 wifi router (This is broadcasting wifi but not strong enough)---->4 port hub ---->airport express (to extend the wifi in another part of house)
thanks!

Yes, you can do this as you stated. In essence you will want to configure both routers for roaming network. Please check out the following Apple Support article that describes this type of network. Although this article uses two or more AirPorts, it can be done with just about any manufacturer's router.

HT1665 How to save photo from iPad to external memory card?

How to save photo from iPad to external memory card?

It's very difficult. I have read where some people have done this with much angst. You can use the camera connection kit to load pictures to your iPad. The reverse is not really supported. A much simpler solution would be to email the photo to your home email account and then copy it to external memory.

Audigy 2 ZS Platinum Pro Not Working ! External Hub Has No Lights

In the device manager it shows 'multimedia audio controller' with a yellow '?' and '!' through it and when you click properties it says 'driver not installed'. I just installed the new driver pack w/ audio console from the creative site!!! What's going on?! I have no sound and no lights on my external hub! A little frustrating... any help would be appreicated. Thanks
The sound card itself seems to be working and songs can be played however the external hub has no lights and seems non-functional. I've tried it in several different pci slots. Is the hub supposed to light up upon bootup or do you have to turn it on with the remote? I think the remote battery may be dead but there should be some kind of lights on the hub unit once the pc is booted... Both AD.Link Cables are connected so this thing should be working..
<div class="dropdown_menu"><img width="20" alt="" src="http://null/i/p.gif" height=""><img width="" alt="" src="http://null/i/p.gif" height="0"><img width="20" alt="" src="http://null/i/p.gif" height="22">[color="#ffffff">Edit Message [color="#ffffff"><img width="20" alt="" src="http://null/i/p.gif" height="22">[color="#ffffff"><img width="20" alt="" src="http://null/i/p.gif" height="22">[color="#ffffff">Add This Message to My Bookmarks [color="#ffffff"><img width="20" alt="" src="http://null/i/p.gif" height="22">[color="#ffffff"><img width="20" alt="" src="http://null/i/p.gif" height="22">[color="#ffffff">Add This Message to My Subscriptions [color="#ffffff"><img width="20" alt="" src="http://null/i/p.gif" height="22">[color="#ffffff"><img width="250" alt="" src="http://null/i/p.gif[/img] height="">[color="#ffffff"><img width="250" alt="" src="http://null/i/p.gif[/img] height="">[color="#ffffff"><img width="20" alt="" src="http://null/i/p.gif" height="22">[color="#ffffff">Subscribe to this message's RSS Feed [color="#ffffff"><img width="20" alt="" src="http://null/i/p.gif" height="22">[color="#ffffff"><img width="250" alt="" src="http://null/i/p.gif[/img] height="">[color="#ffffff"><img width="250" alt="" src="http://null/i/p.gif[/img] height="">[color="#ffffff"><img width="20" alt="" src="http://null/i/p.gif" height="22">[color="#ffffff">Highlight This Message [color="#ffffff"><img width="20" alt="" src="http://null/i/p.gif" height="22">[color="#ffffff"><img width="20" alt="" src="http://null/i/p.gif" height="22">[color="#ffffff">Print This Message [color="#ffffff"><img width="20" alt="" src="http://null/i/p.gif" height="22">[color="#ffffff"><img width="20" alt="" src="http://null/i/p.gif" height="22">[color="#ffffff">E-Mail this Message to a Friend [color="#ffffff"><img width="20" alt="" src="http://null/i/p.gif" height="22">[color="#ffffff"><img width="" alt="" src="http://null/i/p.gif" height="0">[color="#ffffff"><img width="20" alt="" src="http://null/i/p.gif" height="">]] ? <img width="" alt="" src="http://null/i/p.gif[/img] height="">
<img width="" alt="" src="http://null/i/p.gif[/img] height="">

Thank you for your help. It seems as if there is no power whatsoever, although the ad.link cables & 2 are both hooked up. Perhaps faulty cables or hub? Is there anything else that needs to be hooked up?Both were factory fresh before installation... I am unable to fix the driver issue using normal methods. I have tried re-installing the driver package from creative several times..

Portege M200: Booting from SD to external hard drive

"M200 Recovery using Floppy or SD Card
Posted: 15-Aug-2005 10:36
I am posting this in the hope it will help others seeking to use the recovery CD/DVD but without a bootable CD drive. I would like to acknowledge the Toshiba forum of TabletPCBuzz.com
http://tabletpcbuzz.com/forum/topic.asp?TOPIC_ID=12414
for the inspiration of how it was done.
1. You will need a floppy drive or an SD card plus any type of CD drive. If your M200 is not working properly you will also need access to another computer to prepare the floppy disk.
2. You will need to download some software: IsoBuster
http://www.isobuster.com/
and WinImage
http://www.winimage.com/
or similar programs.
3. Put the Recovery CD into any computer and run IsoBuster. Click on Bootable CD on the left and then on the right you should see an .img file of size 1.41MB on the right. On my CD it's called Arnes Boot Record.img. Right click on it and extract the file. Close IsoBuster
4. Open WinImage and then File/Open this .img file. This will be your boot floppy with all the CD drivers you need. In Disk, ensure Use Floppy A: is ticked then Disk/Write Disk. Close WinImage
5. Connect floppy and CD drives to your M200, and boot up from the floppy. It will take some time to find the CD but it will and you will eventually get the recovery screen.
That's it! If don't have a floppy drive but have an SD card and a working M200 then Toshiba's SD card program will put the .img file onto the SD card and you can then boot from there.
There is a good chance this method will work for other Toshiba notebooks but I can't check this"
(author stephem)
This works!
What i would like to know is, is it possible to somehow boot of the SD and instead of the CD drive it finds my external ide to USB hard drive and boots off of the windows on that?
Thanks.

Hi there
I hope after long time you will end your problem. The compatible ODDs for your Portege M200 are:
1) Toshiba, PA3352E-SCD2, USB2.0 CD-RW/DVD-Rom Drive
2) Toshiba, PA3402E-1DV2, Rev.501, USB2.0 DVD Super Multi Drive,
3) Toshiba, PX1055E-1NST, (Freecom drive), with a PC Card (16bit), Cable II, PCMCIA,
4) Toshiba, PX1055E-1NST, (Freecom drive), with a CardBus, Cable II, CARD BUS
When you install recovery image be sure that external device has enough power supply. I recommend you to use AC power supply adapter for external ODD (if available).
I have also found info you can use:
a) Toshiba, PA3352E-SCD2, USB2.0 CD-RW/DVD-Rom Drive
b) Toshiba, PA3402E-1DV2, USB2.0 DVD Super Multi Drive
I hope you will find out which one is the best for you.
Good luck!

External hub not working

I had to disconnect the external hub from the ZS pro sound card on my XP system and on reconnecting I now find that the lights on the hub dont show. It does not do anything,control the volume or work the headphones. The pro gamer G500 speakers can be controlled from the wired controller and the headphones work from it but the on screen display does not show. I have double checked the connection.Has any one got ant ideas please

I have the same problem. Using a powered USB hub to connect my LaCie disk makes no difference versus a direct USB connection to TC.
Overall, I think I have other problems with TC, as I can access it via Time Machine, but not via Finder. I can see it in Finder, but any attempt to connect this way results in a "Connection Failed" message

Power to external hub of Audigy 2 ZS Pl

I recently bought an Audigy 2 ZS PL Pro sound card, and have (as many seem to have) problems with powering up the external hub. I try to be as specific about my questions as I can.
() I don't get clear about what is meant in the Quickstart Manual, step 3. Sofar, I have only placed the sound card in its slot, and tried to connect the 2 AD links appropriately. But should I do more than this to get the hub working? I see a mention of something called "power splitter cable". This is something I have not used, should I (there is a big OR in the manual that is really confusing)?
(2) And here comes my second problem: I bought the card second hand (so I am not accusing Creative of anything, yet) and it seems that the seller did not include a power splitter cable in the package. So, I have to ask, if these are easily available things?

bernt,
The power splitter is a pretty standard cable, it's the same type of connection as a floppy dri've uses. You should be able to get a power splitter like it in an computer/electronics store.
The power splitter/connection is needed for the external dri've. The card itself does not need extra power, but the external dri've connects to the card and needs power to operate.
Cat

Headphones not working on external hub of Audigy 2 ZS Platinum

Hi,
I've just got a new Audigy ZS Platinum Pro for christmas, installed fine, but for some reason, I can't get the headphone jack to work on the external hub. I've tried a number of /4" adaptors, with a number of pairs of headphnes and played around with the MediaCentre settings, etc to no avail. Followed the instructions in the help document all to no avail. My external speakers work fine, and I have tried removing the external speakers and just having the headphones but it still doesn't work. Does anyone have any ideas?

Hi Jeremy,
Thanks for getting back to me so quickly. I have checked all the other outputs/inputs of the dri've (Optical has red light) firewire is working, MIC is working, remote is working, so I think the dri've is getting power. Do you know of any other cases where the headphone jack was physicaly faulty? I plugged the headphones into the sound card itself last night and that worked, but it is not a sustainable solution, as my computer is on the floor and the cable is not long enough!
Any other suggestions?
Cheers,
Rob.

HT2998 Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP

Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP?

You really need a newer Mac Mini with a true HDMI output, because that Mac Mini's DVI output does not support Audio.
You might try a 3.5mm to RCA adapter
from the Mac Mini's headphone jack to the TV's audio input,
but that would require being able to select the Audio input in the TVs menu while using it's HDMI input.
Optionally you could also use an external 2.1 Speaker System or patch the audio from the Mac Mini to your home stereo system to enhance that older Mac Mini's audio.

Connecting the coax cable (from the wall) to my tv instead of box?

I was told this:
Though I though in order for the set top box to work you need the coax plugged into the box?
Please wait for a Samsung Agent to respond.
Please wait for a Samsung Agent to respond.
You are now chatting with 'Danice'. There will be a brief survey at the end of our chat to share feedback on my performance today.
{edited for privacy}
Danice: Hi, thank you for reaching out to Samsung technical support. How may I assist you?
David: Hi the UN40F6400AFXZA tv how do I use the tv function? I have the HDMI cable in the tv to the set top box but when I hit the tv option on source using my remote all I get is "white snow"?
Danice: I would be happy to assist you with the instructions to change the source on the TV.
Danice: What are the devices connected to the TV?
David: no I think you mis understand me.
David: Hi the UN40F6400AFXZA tv how do I use the tv function? I have the HDMI cable in the tv to the set top box but when I hit the tv option on source using my remote all I get is "white snow"?
David: am I talking to a robot or a real person?
Danice: I am sorry for the confusion.
Danice: You are chatting with a Live Person.
Danice: I would be happy to assist you with the information about the TV source on the TV.
David: ok
Danice: The TV source on the TV is nothing but the cable from the wall or antenna connected to the coaxial port on the TV.
Danice: You should connect an antenna or cable from the wall to this port and perform the auto programming through Menu options to get the display.
David: oh the cable from the wall goes to the cable box though?
Danice: No, this port is only for the cable from the wall directly to the coaxial port on the TV.
David: I'm confused cause my cable provider says the cable from the wall goes into the coax on the set top box? So how would the set top box work without the coax plugged in?
Danice: I will clarify that for you.
Danice: The Coaxial port on the TV will work only for the air channels like Antenna or cable from the wall and this is not applicable for the cable by the service provider you are referring to.
David: ok
David: also my other question is UN40F6400AFXZA dose it support Audio Return HDMI?
Danice: I will check that for you.
Danice: Yes, the HDMI 2 is the ARC port on the TV.
David: awesome how do I set it up?
Danice: Yes, follow the instructions mentioned in the link below to use the ARC feature:
Danice: http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx=469179&modelname=UN4...
Danice: Are you able to access the link?
David: yes thank you

The Verizon signal is delivered via coas to the set-top box which allows you to get all of the channels you subscribe to. You then hook the STB your TV (recommended via HDMI in your case since you have an HD set with HDMI inputs). The coax signal must be supplied to both your STB and your router.
If you plug your coax directly into you TV and do a channel scan, you will only recieve local channels (and a couple of others) because all other channels are encrypted and require an STB (or a cable card with an appropriate device) to decode.

Audigy 4 external hub probl

Hi, my audigy 4 pro external hub has stopped working completely. The power light doesn't turn on. I have reinstalled the drivers several times, and I get an error message, something about an NT failed or invalid handler I think? Will the external hub power light come on as soon as the computer turns on, or after windows loads? That way I can determine whether it's a hardware or software problem. Also, there is no power plug anywhere on the I/O hub, so it is powered by the audigy 4 card correct? I found a creative power cord next to the hub, but I think it's for an old MP3 player that has long since died; I can't find anywhere to plug it into anyway. Please help?Thanks,-UnSaniTiZ

Well having spoken to Technical support for about an hour, they told me it could because my onboard sound card hadnt been disabled. Well I've disabled that and uninstalled its drivers. Then I did a clean install of the audigy4. Still the same problem. For some reason, the headphone volume slider in the surround mixer is greyed out and the isnt any headphone tab in the Audio console. Having been told that this is Creatives best product and "it cant have anything wrong with it", I am beggining to wonder just what is going on? I've completly disabled my old onboard sound, done a clean install and still the headphones/volume/remote etc arent working. Is there anything else I can try?

Recover an iMovie from a failed external drive?

Has anyone been able to get an entire iMovie recovered from a failed external Firewire drive? My LaCie just won't power up despite having its light come on, and having other external drives connected through it to my iMac and working fine.
I was about to do some backing up after finishing some edits on my latest iMovie, located on that drive. The edits were taking a longer time than usual, with spinning beach ball going on and on, so I decided to restart the Mac and see if that would speed things up. A restart resulted in a totally white screen for over 20 minutes, so I powered off with the switch, and powered on again with it a few minutes later. After three tries, including trying to boot from the installation disk, the iMac sprang to life again, and three of my external drives came on as usual, but not the La Cie that has my iPhotoLibraries and the iMovies I am working on. It is not a problem with power cords or the Firewire cables, as I swapped them out with the other drives, and everything works except this drive will not power up. Its light comes on, and the Firewire ports allow the other drive to come on, as this one is the one connected to the iMac, but the drive remains cold and quiet, just sits there with its blue light blinking.
I just need it to power on long enough to transfer my data to another drive.
I will settle for drive-recovery if that means I will get all my movies and photos back......anyone ever had to use a drive recovery service for this? If so, how did it work?
I do have backups for the photos, but not all of them as I don't usually backup every day. The movies will have to be recreated I can do this, it will just take lots of time......
not happy with this situation....any support/sympathy greatly appreciated!

Beverly Maneatis wrote:
.. The drive comes on and its light blinks, but does not progress to the drive powering up and the light becoming a solid nonblinking. ..
sorry to contradict you, Bev, but the drive itself has no lights.. :
(pic by wikipedia)
THIS is your drive with your precious data .. no blinks ...
ok, I'm a typically 'Tim Taylor/Home Improvement'-guy (incl. friends in hospital...), so maybe a daredevil about screwing things up/open (pun-taaaa). if you open the housing (usually 4 screws on bottom), you would see a power-supply, some small board for the interface electronics, a fan, some small board for some other electronics. and two cables: one with 4 cables (=power), one flat cable with ~20something wires (=data).. the drive is fixed with another four screws.. it is really dead easy, and you can not damage the drive itself, except you wear some angora and plastic sandals, to get some zillion of volts of static electricity into your fingertips ...
so, if you find a nice PC-guy, ask him to place the drive into another housing (usb or fw.. doesn't matter...).. for a pro, that is a 5min procedure.. I'm pretty sure, it will work! < fingers crossed > < throwing ash over shoulder > < murmering some Hun's incantaion >

Length of cable from card to external hub

Similar Messages

Maybe you are looking for