Lenguage Conversion support for LabVIEW Linux

Hi,
Is it possible to switch from one lenguage to another based on user selection on LabVIEW Linux.
The developed code will have option to choose lenguage.. Based on the lenguage selection my application should convert its lenguage.
Is it possible in LabVIEW???
is there any specific function???
Kindly reply

Absolutely.  There are lots of ways to do it.  I see three basic options, though:
1.  Use import/export strings as mentioned here.
2.  Use property nodes to change all the captions and displayed text on your front panel.  This would probably only be a good option for very small applications.
3.  Use a third party tool like this.  This one is way over-priced, in my opinion.  But I thought I recalled seeing other third-party tools.

Similar Messages

  • NI-DAQmx support for labview could not be found

    Hi, I am pretty new to LabView. I was using VC++ to programming for my USB-6215. Just curious how LabView works, so I try to follow the "Introduction to Taking an NI-DAQmx measurement in LabView" and configure my USB-6215 in LabView. However, when I try to gererate codes for the DAQmx task name control, an error message pop up as "Error:NI-DAQmx support for labview could not be found. Please reinstall NI-DAQmx".  I did reinstall NI-DAQmx, but it doesn't help. This error occurs anyway. Any idea how it happens and the solution is highly appreciated. Thank you.
    Jingyu 

    See attached
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA
    Attachments:
    MX picture.PNG ‏35 KB

  • Install datasocket support for labview 8.6

    Hi,
    Can I get a link to download a Datasocket Support for Labview 8.6 or higher?
    Thanks
    Ken

    Installing the Latest Version of DataSocket and DataSocket Server
    Problem: 
    I would like to download and install the current version of National Instruments DataSocket and/or DataSocket Server on my computer. Where can I find the latest version of this to download it from National Instruments' website?
    Solution: 
    The latest release of the DataSocket libraries and the DataSocket Server is installed with the LabVIEW Run-Time Engine. Go to the Drivers and Updates web page at ni.com and search for "LabVIEW Run-Time Engine" and sort by Version to find the most recent version of the LabVIEW Run-Time Engine.
    http://digital.ni.com/public.nsf/websearch/40295802535E31B686256E91001859AB?OpenDocument
    Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
    If you don't hate time zones, you're not a real programmer.
    "You are what you don't automate"
    Inplaceness is synonymous with insidiousness

  • NI-DNET support for LabVIEW 2013

    We are using currently NI-DNET 1.6.6 with LabVIEW 2011. I installed now also LabVIEW 2013 on my computer and tried to sync the set of drivers with my LabVIEW 2011 installation.
    Well, it seems that NI-DNET doesn't support LabVIEW 2013, at least officially. The NI-DNET and LabVIEW Version Compatibility shows that NI-DNET 1.6.6 supports LabVIEW 2011 and NI-DNET 1.6.7 supports LabVIEW 2012.
    The NI System Driver Set November 2013 list NI-DNET 1.6.7 as part of the driver set. When I try to install it, there is no LabVIEW 2013 support.
    My question is actually, if there is a plan to include NI-DNET support for LabVIEW 2013 or later in the driver set?
    I copied the vi.lib\DeviceNet and vi.lib\nidnet directories from LabVIEW 2011 to 2013 and I can load my programs without any problems. I still didn't build an executable and didn't run them on the test fixture, but the projects can be loaded in LabVIEW 2013 without any brocken VIs. Should I expect any problems running LabVIEW 2013 with the NI-DNET 1.6.6 or 1.6.7 driver?
    Nick
    Solved!
    Go to Solution.

    I would update our drivers right away, but unfortunately the NI-Industrial Communications for DeviceNet doesn't support the PCI-DNET cards. We have probably close to 30 of those in the test fixtures. So, we need to use the NI-DNET 1.6.x driver anyway.
    It will be nice if the NI-DNET installer can copy the NI-DNET VIs and supporting files to any LabVIEW version, well maybe any 201x. I hope until 2020 we can replace the old cards :-)
    Nick

  • DAQmx support for Labview 8.0

    I am having a problem with the current DAQmx Drivers,
    The system used to run perfectly when using labview 8.0, however, after the installation of labview 2009
    The DAQ library in the labview 8.0 folder is missing.
    I tried to install the older version of the DAQmx (Legacy) but i still can't get the library back in labview 8.0 folder.
    Would it possible to get those files ?
    Thanks,
    Ahmad Aladdasi
    Mechatronics Engineer
    Solved!
    Go to Solution.

    Hello again,
    I tried to uninstall everything related to labview on the computer using msiblast, but still having the same problem, even after removing every labview newer than 8.0 files.
    When I try to install DAQmx 8.6 it says a newer version is available.
    I deleted the registry stuff to.
    I had to keep labview 8.0 because it is the version i want to use plus i don't have the CD to install it, so i kept it and it's support files.
    Can anyone send me the DAQmx library for labview 8.0?
    Makesure it is the Vi files not the installation setup because that one will give me the same problem, " Newer Version is installed" problem.
    Don't refer me to any extra links about installing, cuz honestly i have seen them all....
    Thanks,

  • Usrp driver 1.3 do not support for Labview 2013 64 bit ??

    Hello, dear all
    Is anyone install the latest USRP driver 1.3 for LV 2013 64 bit ?  I found there is no version for 64 bit LV 2013. 

    Currently the 1.3 driver supports only LabVIEW 2013 32 bit (even on 64 bit computers.)
    The LabVIEW 2014 version will support 64 bit and will be available to download very soon.
    Please check here within the next week or so:  http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/ssnav:drv/q/usrp/

  • DAQmx support for LabVIEW 2010

    FYI to those downloading LabVIEW 2010 from NI web site:
    After Installing LabVIEW 2010 (download from web site), I noticed that there is no support for DAQmx (i.e.. VI libraries) in NI_DeviceDrivers-February2010 DVD (my latest copy).  Your have to download and install DAQmx 9.2 drivers (the first to include LabVIEW 2010 support).
    Additionally, If you were using Traditional NI-DAQ (Legacy) 7.4.4 VIs in a prior version of LabVIEW, you must do one of the following:
          1. Uninstall current Traditional NI-DAQ (Legacy) 7.4.4 installation and re-install after completing LabVIEW 2010 installation.
              Reason: Traditional NI-DAQ (Legacy) installs support only for the latest version of LabVIEW found on the system.
    Or
          2. Copy the the "<previous LabVIEW>\vi.lib\Daq" directory and all it contents to a new "<LabVIEW 2010\vi.lib\Daq directory.  This way you can use Traditional NI-DAQ in both versions of LabVIEW.

    I didn't have DVDs, I had to download.
    Yes it was a mess.  The device driver download took forever (NI can't help that).  The installation took beyond forever (what else can be done?). 
    I was disappointed that I had to do all of this backing up of legacy folders and restoring them after installing the device drivers.  Why does NI always have device drivers and toolkits install to the latest version of Labview only?  Why couldn't they leave the legacy stuff alone??  I still use LV2009 and wanted to try LV2010.  This involved a whole lot of trouble and time. 
    NI needs to provide a much easier way to upgrade, while still allowing previous versions to work without modification.  Most people who upgrade will not completely abandon the older versions.
    - tbob
    Inventor of the WORM Global

  • Is windows me supported for LabView?

    Can Labview 6.1 be installed on Windows me?

    Cece,
    Yes, LabVIEW 6.1 is supported on Windows ME. Please see page 8 of this PDF document whcih describes the system requirements for LabVIEW 6 and later. Windows XP is supported starting with LabVIEW 6.1.
    Randy Hoskin
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

  • UTF8 conversion support for jni

    We were using db-4.2.52.NC, and found that conversion between the java UTF8 and C native encoding wasn't supported with the BDB jni, so we added it ourselves. We are in the process of upgrading to 11G, has that support been added since then?

    I don't understand the context that I would use the TO_TSTRING macro. I do know that version 4.2 worked for us, and we had to convert our UTF8 strings to native before calling BDB functions, and we need to have a common code base for all platforms. So I'm guessing that I need to build without the _UNICODE option.  The way I would do this is to go the IDE and change all of the flags for all BDB projects and for all build configurations (debug, optimized, 64-bit, 32-bit, etc).  Is there a simpler and transparent way to do this?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Support for RH linux 5.3 or 5.4

    Hi All,
    In the supported platforms for BO 3.1 edge series & 3.1 enterprise, RH linux version supported is 5. I would like to know if RH linux 5.3 or 5.4 is officially supported or not?
    Cheers,
    AK

    Hi
    It is supported. .3 and .4 are just service packs and we do support them as per "compatible support". Meaning it is maybe not formally tested but we do troubleshoot related issues by extension of RH5 support.
    See here for support policy details: https://service.sap.com/bosap-supportedplatforms
    Regards
    Roland

  • [Comm] LinuxCertified announces support for Oracle Linux on its laptops

    Hello,
    LinuxCertified is pleased to announce that its Linux laptops are now available with Oracle Enterprise Linux 4 Update 4 pre-installed.
    For more details, please visit: http://www.linuxcertified.com/
    Thanks
    LinuxCertified Team
    -

    user6029797 wrote:
    •oracleasmlib-2.0.4-1.el5.x86_64.rpm -- I need this oneThis requires Oracle Linux support, as it is not GPL software and is only available to subscribers.
    •oracleasm-2.6.18-164.el5-2.0.5-1.el5.x86_64.rpm -- I need this oneNo, you don't. This is built into the kernel for OL6U1.
    Or does it mean that I must pay Oracle in order to be able to get these packages in order to learn ASM at home ??
    Why would Oracle allow us to use their RDBMS/RAC/ASM/Linux software at home learning for free and not supply the above two packages??If you want to use ASM for free, install Oracle Linux 5 Update 7 and download the RHEL5 oracleasmlib package from here:
    http://www.oracle.com/technetwork/server-storage/linux/downloads/rhel5-084877.html
    Keep in mind that Database is NOT certified on Oracle Linux 6 anyway, so it is challenging to install. The very article you link to uses Oracle Linux 5. It also links to these very same RPMs. If you follow the article more carefully, you won't have any issues.

  • 3d control sample for LabVIEW Linux

    Hello,
    is there any easy way to exchange the 3D Graph Active X Container from a LabVIEW for Windows VI into a non-Active-X control for Linux?
    I have a VI that displays a simple 3D intensity graph (intensity plotted over x-y field, imagine for instance a typical gaussian intensity distribution in 3D created by measuring 2D-intensity data) using "3D Surface.vi". The Active-X control for the 3D display allows to change the projection properties and the viewing angle. This VI is not executable in LabVIEW for Linux, as there is no Active-X in Linux. I had a look at the 3D Picture Toolkit which is available for free, but I have no idea how to display a point array in 3D easily - all examples that I have found are just geometrical bodies which are created and displayed. I also have read that LabVIEW 8.2 offers a new 3D Graph Modul based on OpenGL (my VI is LabVIEW 7.1 right now) - but my feeling is that this is also rather complicated to use and more suitable for 3D rendering of picture scenes like robotic arms or geometric bodies.
    Does somebody have a simple VI showing how to plot an intensity field over x-y, allowing to change the viewing angle (similiar to what 3D Surface.vi in Windows is capable to do)?
    Best regards,
    Gabs

    Hello Wiebe,
    thanks a lot! This is really helpful (even if I was hoping that someone has a sample VI doing exactly this as I could not imagine that I am the only one who tries to port an intensity measurement VI with 3D display to Linux). What an effort to do what under Windows is just a few mouse clicks. Why can't NI simply provide a LabVIEW-native 3D control for such tasks if they always say that their software is best for data collection, management and visualisation?.... Maybe Linux is still not so common that this was a request from many customers before.
    Anyway, again, thanks a lot for your answers and help. Best regards,
    Gabs

  • Scanner support for LabVIEW?

    Just wondering if anyone knows of 3rd party scanners, NOT GPIB or
    Serial, in other words USB or 1394 or any high speed scanners that have
    drivers that will work with LabVIEW?
    Thanks,
    Adrian

    > Just wondering if anyone knows of 3rd party scanners, NOT GPIB or
    > Serial, in other words USB or 1394 or any high speed scanners that have
    > drivers that will work with LabVIEW?
    >
    In cases like this, you should probably look
    at using a generic TWAIN interface. It will
    hide the bus and let you focus on getting the
    image into the computer.
    Greg McKaskle

  • Install Hardware Support for LabVIEW

    When updating to LabVIEW 2013, I'm asked to install appropiate device drivers, but I dont know where to find them.
    Solved!
    Go to Solution.

    Since you just need DAQmx, use this installer: NI-DAQmx 14.5
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • What would be the veritool.zip replacement for LabVIEW 8.x. It isn't supported beyond 7

    I have been told that veritool.zip isn't supported for LabVIEW 8.x.  It had worked on 7 but is no longer supported.  Any suggestions as to what to use for testing our LabVIEW code?  We have upgraded to 8.20.  Hoping someone out there can help me.

    You may be able to update VeriTool by replacing the error handling VI's.  The VI lib is rather small and worth taking a look at if you're in dire need.
    TheDillo

Maybe you are looking for

  • More Simpletech EHD Problems!

    So, I posted about 4 months ago or so regarding my mac not reading my external hard drive. I tried repairing the disk through disk utility, and this is what it said: Verify and Repair volume "STORAGE" ** /dev/disk3s2 (NO WRITE) ** Phase 1 - Preparing

  • Report for reports

    Hi Experts, I have a requirement where I have to build a query for some BW querys i.e. I have to generate a Report Access History Log for define BW PP Reports. Following information required in the Log Report: 1) How often are these reports accessed

  • How to move 'month-end accural' solutions from USA PY to other PY?

    Hi Gurus, I am facing with 'month-end accruals'. But in my country grouping, there is no standard solution for this issue. Is it possible to move 'month-end accural' solutions from USA PY to other PY? I've searched NOTES but in vain. Thanks for help.

  • Call Manager 9 - Translation pattern report

    Is there any way to search all patterns to see what is pointed at a certain #? We have a UCCX queue for special projects. There are calls still going into this queue but I am unable to find what number is still pointed at the incorrect route point. I

  • CS6 crash down after 10min

    Hi there, I'm busy with a documentary (90min cinema/tv production) since one year. I started with CS06 on a Macbook pro (maverick, 15' 2,8GHZ). Everything was fine and I barely never had a problem - despite the fact that the computer was quiet slow.