Lennovo n200 3000 images on lcd distorted

Hi
i have n200 and yesterday when i turned on  my laptop all the images on the screen were distorted completely .. even the initail lennovo screen doesnot come clear all the images are moving up and down or just mangled up ...
anyone plz help how can i get this problem rectified
regards

Hey
thanks phil for the reply
hey when i connect this with some external lcd monitor it works fine  and when on my laptops lcd even the first windows screen comes up ok for a few seconds and then starts to distort .. do u think this could be a bios problem .
secondly mine has just run out of its warranty which is of 1 year ... so if my lcd is damaged ( in a mysterious way becuz i don't recall droping or handling it in a rough way) is there some cheap option as i dont want to spend a lot of money on it
regards

Similar Messages

  • My Lenovo n200 3000 power on problems..plese read more for full error story.

    My lenovo n200 3000 on switches on when i press the power button wait for the windows sign to appear. it then shuts down. then i press the button again and select start windows normally. i have to do this 3 times every time i switch on my laptop on!!! please help this is very annoying.

    This one looks like a hardware/software conflict. Go to service or you can try to do something yourself.
    I can give these advises:
    It can be software problem, so you can do this:
    1. You can restore your OS with last saved (fully working and starting) restore point.
    OR
    2. You can try to start Windows in SafeMode and: 1) try to find coflict driver in My Comp>properties>device manager (look for yellow "!"); 2) try to delete all lately installed drivers. 
    OR
    3. You can reinstall Windows in "clean" install. I mean with disk format.
    OR it may be hardware problem, so you should do this:
    1. It may be problem with power.
        Solution:
           - Try to start laptop without battery. Just with AC-adapter.
           - Try to start laptop just with battery.
    2. Maybe some detailes get out from slots.
           - You should open laptop and check every detail (hdd, ram etc). Get them out clen it and than put them in.
    N.B. In my desktop PC such thing was because of "Microsoft UAA High Definition Audio driver". It conflicted with my video. Also in my old laptop it was because my lcd was not fully plugged in.
    If nothing of these solve the problem go to the service.
    If you need translating agency - contact with me!

  • Lenovo n200 3000 0769-BAG vista camera driver?

    Hello my friends. I have Lenovo n200 3000 0769-BAG model laptop. My operating system is vista home basic x86. My integrated camera doesn't works sometimes. This event happens frequently at now. The camera driver is not original, it is automatically installed when vista operating system setup. So what can I do? Is there any original camera driver somewhere? Thanks a lot...
    p.s: (0689 type camera driver doesn't work at 0769-BAG.)
    Message Edited by gizsin on 04-28-2009 07:11 AM

    Hi !
    I have exactly the same laptop and I had the same problem.
    It was hardware related. The camera wire become loose and was not connecting sometimes.
    You can, if skilled, solve the problem yourself by following the dismantling videos and correctly plugging in the camera. If you route the cable correctly you'll solve the problem.
    Bear in mind that you need some tools, time as you'll have to dismantle quite all the laptop and skills in order not to make things worse... 

  • Trying to split large library, I exported a folder of 3000 images to a new library.  The new library was created with these images, but it still remained in the original library.  How can I remove it from the original library while keeping it in the new l

    Splitting a library does not remove the folder I moved from the original library.  I exported a folder of 3000 images from the original library to a new library.  The new libraryb was created alright, but the folder and the 3000 images remain in the original library.  Why? And how do I safely remove them?

    The new libraryb was created alright, but the folder and the 3000 images remain in the original library.  Why? And how do I safely remove them?
    Exporting a library will  create a duplicate of the exported library items. Usually you do this to work on a partial library on another computer and later merge the changed images back. Splitting the library is not the primary purpose of exporting.
    If you want to remove the library items that you exported, select them in the source list of the library inspector and delete them (File > Delete Original Images and all Versions).  Then empty the Aperture Trash, after checking that you did not trash more than you wanted.
    But check, if the backup of your Aperture library is in working condition, and check the exported library carefully, before you do such a massive delete.
    Regards
    Léonie

  • Why do images have noise/distortion in Aperture 3?

    I am having disturbing issues with Aperture (3.1 and 3.24) Lately, I am finding multiple images in my libraries that are distorted–they either have bands of gray noise on them, or, seem to have overlapping bits from other images or large balck sections. Requesting a New version from master brings in the same issue. If I try to export, sometimes I get nothing but black, sometimes the image retains the distortion. (I have posted a couple of examples on flickr to show what I am talking about.. . (http://www.flickr.com/photos/njwight/8114245495/in/photostream   http://www.flickr.com/photos/njwight/8114225733/in/photostream )
    Additionally, I have had messages when starting Aperture about " inconsistencies in the database and to repair it. " (I have had this a few times and I run as requested.) If I run a rebuild or repair (without the message) it runs fine and does not seem to find issues.
    I have more than one library and this has happened in more than one, so it is not isolated. It has also happened on both my MacBook pro and iMac. The MBP is upgraded to Moutain Lion but I have hesitated with the imac as I would prefer to know what is causing thi before I upgrade teh second computer. It did start before the upgrade however.
    If anyone has any ideas, I am all ears!
    Thanks
    NJ

    Were these images originally fine or is this the first time you have looked at them?
    Is it a few specific images that show the problems (and they show them every time), or is it hit or miss?
    Because what you're seeing is not noise or distortion.  It looks like file corruption to me.  The thing is, Aperture never touches your master files.  So the most common cause of what you're seeing is a corrupt card reader, or corrupt cable or something when you import the files.  If you're 100% positive the files were once good, and have since been corrupted, it's worth exporting the masters out of Aperture and looking at them in Finder or via another non-Apple program that can read them (i.e. Adobe Bridge).
    You say it happens on more than one computer.  Is it the same images have problems on both machines?  Because the 2nd most likely cause of this is a bad video card or bad video drive.  But if you're seeing it on > 1 machine that sorta puts that one out.
    It's worth investigating what you're using to import the photos in the first place, though, because corruption at import due to card reader or cable is way more frequently reported than I'd have expected.  And, hopefully you *never* import directly from the camera.  That's fraught with peril :-)

  • Can I correct for an image that is distorted: should be square, is not?

    I'm working with some photos of flat art work. The camera was not aligned perfectly, so the images are not quite square. Can I use Photoshop to correct for this?

    Hello!
    There are many solutions to your problem. I have posted a few possible solutions in changing an image that is distorted.
    If you cannot find a solution, I would recomend posting your image in a response so we can all see the image and offer some specialized advice.
    Janelle

  • BIOS Update for Lenovo N200 3000 0769-ASU

    Hello,
    I want to upgrade my hard drive but I must upgrade my BIOS, but I cannot find a BIOS Update for Lenovo N200 3000 0769-ASU with Windows 7, any help or assistance is appreciated.

    Sorry for replying to an old post but I found one of theese laptops a couple of days ago where I work. (I work at a recycle station/place/something)
    I decided that I wanted to try and fix it since it suffers from the issue discussed here.
    I have about 15 yrs experiance with fixing computers and about 3 years with laptops and my repair succes rate is rather high.
    But this laptop is a piece of very bad and **bleep**ty workmanship - The whole upper part of the mainboard is toast - the part that is just under the connection to the batteri is badly burned.
    I will upload some pictures shortly, and give a detailed workaround if I get it fixed
    cheers

  • Spill milk on lenovo n200 3000

    I spilled milk on my lenovo N200 3000
    i just switched it off and removed battery.
    i moved laptop upside down so the milk dropped on the floor and left in an open air...
    i dont know what to do next.

    The only thing I know to do is to take it apart as much as you can to make sure there is no liquid anywhere. Then you can try powering it back on. Compressed air cans dry pretty good.
    IT Specialist and Consultant
    Lenovo Tablet Evangelist
    Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
    Deutsche Community   Comunidad en Español
    Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

  • List of processors supported by N200 3000 0769

    Hello,
    Can you please tell me which T familly processors are supported by N200 3000 chipset GM965?
    Is the T9xxx familly supported?
    Thanks,
    Andrei 

    hi N200,
    Welcome to Lenovo Community Forums!
    This Maintenance Manual should list what is compatible with it.
    Any WLAN that's not on the list will not work.
    All WLAN that's on the list should have a Lenovo FRU sticker on it, if it does not have the FRU sticker even if the same model, it may not work.
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/42x3553_03.pdf
    If you are looking for a more recent or Latest WLAN adapter,
       I suggest you purchase a USB WLAN that could meet your preference.
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • On YouTube, I can't play playlists there. It says I need to update my Java and it is updated already. When I go to different sites like Yahoo! the links and images are all distorted. This is the second time this has happened to me now

    Hello Firefox,
    I am having problems with my Firefox's image processor I believe. My web browser is fine but then a few minutes later I get some weird look on my page. It then just stays here and I can't fix it. When I go to Yahoo all the links and images do not look normal. I really cannot explain this and wish I could send a picture instead. When I go to the Log in page for Facebook I do not see the image of the small faces networking around the world. It's blank and the links are widely spread apart. With YouTube the page is also distorted. Nothing is arranged properly. I can watch videos. However when I go to someone's profile or a playlist videos cannot play or show up. It says I need to update my Java player and it is already updated. It still happens when I uninstall and re install back. I was only able to fix this problem by uninstalling everything related to Firefox. I do not know how to solve this any other way. I don't like it when all my information is lost such as saved passwords and bookmarks. If there is any way to solve this thanks. I don't want to uninstall this again.

    Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.<br />
    See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]
    You can check the Adobe welcome and test page: http://www.adobe.com/software/flash/about/
    You can use this manual download link:
    *http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

  • Nokia lumia 1520 LCD distortion

    I have noticed lcd screen distortion when i apply pressure behind the phone , near the camera area ...
    even a slight pressure tend to distort the screen.
    its even more noticeable when the screen is displaying grey shades color

    Hello, SITI87hajar.
    Did something happen to your phone prior to the issue? Do you see the distortion regardless of the background color that you're using? 
    Try to change your phone's background color. If you're using black, change it to white and vice versa. Also, try to set the phone's brightness level to Medium. To do that, go to Settings > Brightness. You may also try to reboot your phone by pressing and holding both the volume down and the power keys until it vibrates. 
    If the issue persists, you may go back to the Point of purchase to have your phone replaced or visit the nearest Nokia Care Point to have your phone assessed by our technicians.

  • Using a mask to create an image that's distortable

    Essentially I'm trying to create a mask that captures the image it encircles and allows me to distort the image.  For example, if I have a picture of a person and draw a circle mask around the person's head, when I distort the mask it distorts (e.g. stretch/skew/bend) the person's head and not just the shape of the mask.  I'm trying to create my own version of this video but using Motion instead of AfterEffects and Mocha. 
    https://vimeo.com/38940289 
    If you watch the tutorial it's the AfterEffects "precompose" function that I'm trying to mimic.  And I don't think creating a new Group in motion is the ticket because I can only distort the image by adjusting the edge of the canvas vs. the edge of the mask. 
    video's tutorial vimeo.com/benboutwell/frametutorial
    Thanks for any and all help!  It's been a couple of frustrating days... 

    You don't need a mask if you're doing rectangular shapes.
    Clone your original source (type- K).
    Crop your source to the rectangle you need around your subject (click and drag on the numbers to go past the slider imposed limits). Use the rectangle shape you'll be using in the animation as your guide for dimensions. [If you're using a shape rectangle, turn off the fill, use an outline width that will be easy to match points with and place it over the clone layer.]
    Type A to turn on "Animation" (recording). [it's easier to start at the first frame of the animation, but it really doesn't matter: you can go back and forth in time and even overwrite settings for any frame if you need to tweak anything.]
    Select the clone layer;  right click on the clone and select Distort from the popup (or select it from the Tool menu). You'll be animating Four Corner. With the Animation recording on, you can use whatever else is at your disposal as well (position, rotation, scale and shear.) If there's not a lot of change in the frame orientation, you can click and drag inside the Distort (Four Corner) to reposition all four corners at once.
    Go frame by frame to set the corner points. Or, if there is actaully a frame in your video, you might try setting up motion trackers [Behaviors menu > Motion Tracking > Analyze Motion. Then for each of the Four Corner parameters, right click and select a Track parameter behavior. In the Behaviors tab, for the Track parameter behavior, drag the Analyze Motion Behavior for the matching point onto the source well.]
    http://documentation.apple.com/en/motion/usermanual/index.html#chapter=19%26sect ion=6%26tasks=true

  • Png/jpg images are becoming distorted when placing into Muse

    Hi,
    I have a problem in Muse.
    I've made a logo/text in illustrator, saved for web either as png or jpg and when I placed it in Muse it right away became distorted.
    Sort of, like you're using a small image and enhance it to much.
    Does someone know an easy way to solve this. I'm quite new with these programs, so I'm thinking maybe I'm doing something wrong?
    Best regards,
    Dennis

    Can you supply screenshots of your image in Illustrator and then another image with it in Muse?
    If you try resizing the image in Muse you can get distortion if you don't keep the same aspect ratio in the height and width. Always best to make sure your image is the correct size in height and width before adding it to Muse or any Web editing program.

  • Overexposed image in lcd vew

    Hi, i was testing my new hf r40 most of the time my prevew on the lcd looks very whiteish or overexposed, when i check the recorder video on my tv looks awesome but in cam monitor looks very bad, i just cant do adjustmen on whitw balance or exposure since i will underexpose if i judge image by the monitor, is this a normal issue or do i have a defective cam.
    I can see in menu i can down the lcd image brightness and the setup have several blocks from whitw gray to black as a guide, but if i lower to min the image brightness i still get the first 2 block as white

    btt.
    Nobody knows how to do this? Trying to get our 3D files embedded in the pdf. Cant figure out how to have the 3rd party viewer right in the PDF for mark up.
    Thanks.

  • Adobe form company logo image color is distorted when printing

    Hi all, I have added an graphic to my pdf it looks good when I view the pdf. It also prints fine when I open the pdf and then print it. The problem is when the pdf is sent directly to the printer without previewing it, the image will print but the colors will be distorted.
    Any help is appreciated:). Thanks.
    Edited by: Katie Doody on Jan 4, 2012 12:16 PM
    Edited by: Katie Doody on Jan 5, 2012 7:43 AM

    Please try with the below steps:
    1) Open the Pdf which you want to Print.
    2) Select Print button.
    3) From the dialog box, select Properties.
    4) then select Advanced.
    5) Click on  "Edge-To-Edge" and from the drop-down select "Enabled"
    Find the screen-shot below for reference....
    Naveen

Maybe you are looking for