Lenova k3 Note Firmware update (296MB) issues

Hi All, I have recently received a firmware update 296MB for my lenova k3 note. After update the software, I am facing below issues. 1. New WLAN is not searching.
2. Unable to connect to another mobile through ShareIt, Super-beam and Xender applications. Solution tried but its not worked 1. Switch off and On the mobile
2. Clear the cache for particular application. Let me know how to resolve the problem.

After this update all apps should be updated in your case may be its not happened. You can uninstall & re-install the applock. It will start working. While uninstalling dont delete any app data so that it should fetch your old passwords etc.

Similar Messages

Can cache apps but not firmware updates

Hello,
I Currently have 2 mini macs in my work network running mavericks server with caching enabled, now all our users have iPhones and some have iPads running iOS7 as a minimum, all our iDevices are setup to run though our proxy and this works well for reporting traffic, ipads and iphones are able to install apps and update apps with no issues and is cached on the mini macs fine, but my problem is with the firmware updates, for some reason when a iDevice goes to update the update comes down to the device but it it not cached on the macs, is there any reason for this ?

If you only want the free apps, take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID.
You will of course not be able to get anything other than the free apps without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.)
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Lenova K3 Note 3G video call issues

I had Purchased Lenova K3 Note on 22.07.2015 Video Call Option Not found in Calls log Unable to make video calls by 3G Idea Cellular network or Skype & other app downloaded.unable access Mobile banking to login please resolve issues at earliest.

Are you having problems connecting to all wifi's or just this one? If just this one, you could try updating the router fimware.
Your Lumia supports video calling using Skype.

Time Capsule (brand new) needed Firmware update, now issues still

I have just updated my firmware on the Time Capsule, (I did figure out why I was getting an earlier error on my Time Capsule when an error popped up that "Time Machine couldn't complete the backup to my TIme Capsule because the "backup image was already in use". I finally saw the number or exclamation mark (I forget) and it stated it needed a firmware update (wish it would download them automatically). After I did that though, I am backing up my iMac.
I have to take my iMac to Apple today in Tampa and drop it off to replace the HD per the replacement program of a recall so I have to make sure the backup is complete. I also want to make sure my iPHone is backed up and so I was told when I bought Time Capsule that it would also wirelessly sync up all my Apple wireless devices.
I was told to use Airport Utility, but that doesn't seem to work at ALL now and I'm not sure why. As of Feb. 7th, that was updated and it seems to have caused problems for many.
I am in v. 1.2 and just deleted it and added it back in.
How can the Time Capsule allow my iPhone to access it through Airport Utility? Was there a setting I am missing?
HELP with the Time Capsule backup, the iPhone (and then my daughter's iPod, my iPad and that's about it) backing up wirelessly through Airport Utility.

Your idevices do not backup directly to the TC.. nor does the Airport Utility do anything but setup the TC.
Time Machine is the backup for the Mac.
The devices like iphone are backed up to itunes or cloud..
The itunes is then backed up by TM to the TC.. so it is indirect.
See apple doco on back of iphone for instance. http://support.apple.com/kb/ht1766
Let me also suggest you do a disk image of the mac. You will find this is much easier to recover your working mac from.. in fact get a USB drive is even better and download superduper.. you can do free disk images from it, but they can also be done from disk utility. Make a bootable USB drive which is an image of your existing internal drive. That can be easily restored to the Mac when you get it back.

Nokia 5800 XM failed firmware update/GPS issues

Hello.
I'm currently having issues with my Nokia 5800. Firstly whenever attempting to update the firmware through the Nokia Ovi Suite, it fails with an "Error in the software update package configuration" error. I've read around on the forums, and I've noticed that other people have had a similar problem, but no real answer was given other than "I solved it, but I won't bother telling you how". There must be other ways to update the Nokia firmware than just relying on the Ovi Suite.
Also my GPS on the phone never manages to get a signal, no matter how much in the open I am. I'm assuming that this is probably due to the fact that I haven't updated the firmware, but if anyone else has any ideas why this is happening feel free to let me know!
Cheers

Hi, I was having the same problem but I found that if you use the Nokia Software Updater rather than the Ovi Suite it installs fine!
Hope this helps!

Firmware update/restore issues

I got the iPhone3g and transferred/restored from backup my contacts to the new phone from my 1st gen iPhone. When I upgraded the firmware today the backup got corrupted and I had to restore it from the backup of the my 1st gen. Now after updating, restoring, and completing the whole deal iTunes reverts to the "an iPhone has been previously synced with this computer" screen and it repeadedly prompts me to restore the iPhone again. Any suggestions to cure this problem (besides switching out the SIM cards...though I'm not sure if that will work)

Thanks wjosten...
That is helpful. but I donno much about the servicing and all.. Is there a way to fix this...
Actually the device is with OS 5.0 so before using it I tried to update to the latest 5.1.1 using iTunes..
but in Net some peoples says that it is an illegal operation that caused error code -1..
I am worried as this is the second day of my first idevice and I am not been able to see even its homescreen..
Kinldy let me know if there is some way I can resolve it..
Thanks
Prem

While updating iphone software to 5.0.1, I am getting error message that Iphone cound not be updated because the firmware file is not compatible. Can anyone help me to resolve this issue.

While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
Can anyone help me to resolve this issue.

Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
First did a full back up of iphone using iTunes
Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
Disconnected USB cable from iphone
Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
Pressed and kept holding Home button while plugging cable back into phone
I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
Recovery Mode alert came up in iTunes.
Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
iphone did not appear in iTunes due to missing pairing file (that made me nervous)
iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
Eventually the iphone asked if I wanted to restore from a back-up (whew!)
A window opened in iTunes and I was able to select my previous back-up file for the restore
A full restore from back-up then occured
I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
When the restore was done I had to re-enter some passwords, but everything was there
iOS is now 5.0.1 (9A406). The whole process took about an hour.

Anyone NOT having problems with ITunes 8 and latest firmware update???

I have really been put off updating to ITunes 8. The firmware update appears to be doing well. Is there anyone that uses a MacBook like myself who have had absolutely NO problems with new Itunes and firmware update? Answers on the back of a £50 note....

Not having issues now that I have updated all i(hardware) firmware to version 2.1, two phones and an iPod Touch, all work fine (So Far) (knocking on wood). As far as iTunes goes I have mixed feelings. It's a bit faster and more stable, however they removed the "Burn CD" ability from the software. That blows a bit as I would make CD's from some of my play lists to play in the car. Yes I can dock my devices in the car, but as a matter of convenience it's easier to fire up the CD when your in a rush.

TC issues after latest firmware update

Here is the skinny, my TC went through the normal firmware update a bit ago. Wednesday my Internet stopped working, when I use the Airport Utility app it showed the TC online, at first, then it gave me the error that the TC did not have a valid IP. Thought might have been a problem on my ISP's end so I grabbed another router and set it up Internet no problem. Has to be the new firmware right so I pushed the firmware back 3 versions, and still the same thing no valid IP but connected to the Internet but no HDD (Yes it said not a valid IP but connected to the Internet on one wireless PC). Everything else in the house would not connect to the TC they could see it but when you went to connect never asked for a password and I got the spindle of death type deal. I saved my settings and did a hard reset with the button on the back of the TC, started over and rebuilt the connection, same thing happened not a valid IP. I have read that Apple released 3 different firmware updates supposedly the last one works, it doesn't when I load the firmware I get the same error TC does not have a valid IP. I need some help, I have cycled through power down and power up situations over and over. Anyone have any other suggestions?

Need some more info.
What is the modem.. make and model?
Is it both modem and router or just a modem?
What is the actual model of the TC.. the number from the base.. A1xxx where the x are numbers.
The latest firmware is an issue.. that is 7.6.4 and you should go back to 7.6.1
But it does seem hard to get rid of properly.
I want you to do a factory reset not just a hard reset.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Please redo the setup using all SMB names.. that is short, no spaces and purely alphanumeric characters.
eg TCgenx (use actual gen if you want) for base station name.
TCwifi for wireless name. (or TC24ghz and TC5ghz which is well worth naming both bands so you can test more carefully).
Please download and install a v5 utility on a computer if any of them use up to Mountain Lion.
Tell us what OS the computers are running and I can tell you how to install the old airport utility.
Test the TC in bridge to your other router is also a good alternative.

Latest Firmware Update Issues with Screen Sensitivity

Hi All,
I synced my original iphone a few days ago and it required a firmware update. Since then, I have had numerous problems with the touchscreen for email and texting. Sometimes, I cannot open a folder on one of my emails or send a text because hitting the "send" icon does nothing. I've restarted my phone and reset it but have not yet tried a restore. Had anyone else had these issues?
And do you have any other suggestions I should try before doing a restore? Many thanks.
Kathy

Do not know about its compatibility and functionality.. but if you are OK with Beta softwares.. you may have a look at..
http://betalabs.nokia.com/blog/2011/03/16/nokia-software-updater-for-mac-available-in-beta?restsso_p...

Problems with EFI Firmware Update to 1.5 for mid 2010 Mac Pro, and sleep issues

Hello to the community, I have run into an annoying issue.
I need to update the EFI firmware on my 8 core mid-2010 Mac Pro. I downloaded the EFI update from the apple website from here : http://support.apple.com/kb/DL1321
But everytime I download it, as I click to install, it gives me the message:
Alert
This software is not supported on your system.
But clearly this is the correct EFI for my computer. I tried burning the Firmware restoration onto a CD from here:
http://support.apple.com/kb/DL1320
But the computer did not respond the way it said it should (with the 3 flashes/beeps etc.) and have the optical drive open for the CD.
So I'm completely stuck.
*Also my Mac Pro had issues with sleep, when I put it to sleep, sometimes when I try to bring it back, it restarts itself, and other times, it just turns itself on and the monitor screen remains black, so I have to hit the power button to turn it off then back on again. This only happnens when the computer has been put to sleep for a slightly extended period of time, roughly 20mins +, sometimes longer. I was trying to solve this problem by first updating the firmware because I think it could be related to that, but I've had this problem with the firmware so I couldn't find out. This is actually the bigger problem for me because it will affect my work. I am currently using an iMac while I fix up this mac pro.
I'm a music composer so I've upgraded many aspects of my system due to work. I have a 1TB Samsung 840 evo SSD, 2 seagate 2 TB HDD, and 1 WD 1TB HD (the original one in the mac pro), along with 32 GB of RAM. So my only problems are the firmaware and the weird activity when the computer is put to sleep.
Some help would be greatly appreciated!
I'm running OS X Mavericks 10.9.2
mid-2010 Mac Pro
8 core processor (2 X 2.4gHz)

According to this article, your EFI firmware is up to date:
Computer
Model identifier
EFI Boot ROM version
SMC version
Mac Pro
Mac Pro (Late 2013)
MacPro6,1
MP61.0116.B04 (EFI 2.0)
2.20f18 (SMC 2.0)
Mac Pro (Mid 2010)
MacPro5,1
MP51.007F.B03 (EFI 1.5)
Mac Pro (Early 2009)
MacPro4,1
MP41.0081.B07 (EFI 1.4)
Mac Pro (Early 2008)
MacPro3,1
MP31.006C.B05 (EFI 1.3)
Mac Pro (8-core)
MacPro2,1
MP21.007F.B06 (EFI 1.2)
1.15f3 (SMC 1.1)
Mac Pro (Original)
MacPro1,1
MP11.005C.B08 (EFI 1.2)
1.7f10 (SMC 1.1)
EFI and SMC firmware updates for Intel-based Macs

HP Laserjet P2015 will not accept firmware update

Hi,
A laserjet P2015n will not accept a firmware upgrade.
When attempting to upgrade, paper jam led flashes 3 times, pauses for 1 second , flashes 3 times.......led will repeat this pattern even after upgrade is supposed to have completed.
If I cycle the power, the printer returns to ready state but firmware is still at the older version.
User had been experiencing dificulties printing and firmware update might resolve the issues.
Does anyone know of a solution?

The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
You can also look through the article pertaining to this printer for possible solutions:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Firmware update for HP OfficeJet Pro 8000 wireless to fix load paper issue - as for the 8500?

Is there any hope that that soon will be a firmware update to fix the issues loading paper and the printheads for the HP OfficeJet Pro 8000 wireless printer?
A month or two ago there came a firmware update to the HP OfficeJet Pro 8500 wireless, which has some of the same issues,
and allegedly should have the much of the same load-mechanism as the 8000 printer.
It would be great, as we are on the fourth (4) replacement of this HP 8000 printer. For example, it would be great if we could use normal (80g) paper and not has to use (HP) 90g paper, as this prevents us from using the duplexer and only print on one side.

Thanks for the advice to contact HP tech support!
I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

5530 firmware update found but not compatible?

Hi,
the phone is a french 5530 (no fimlock, no netlock, a free phone), a firmware update is found from nokia, i can download it from the phone. Then it restarts the phone, and a white screen appears with the update bar. But then it just restarts and on the home screen the message appears that it is not compatible with my network provider? I really want to update... but how?

I'm having exactly the same problem. I even tried downloading via laptop, but it wont complete the installation.
I am so sick of my phone freezing or switching itself off I have just rang my contract supplier and they are going to arrange to get a new phone sent out. I did ask if I could have a different make of phone as I don't have much confidence in this one, but they will only exchange for the same.
Let's hope a new phone solves the issues!

External hard drive is not working on airport time capsule even after 7.7.2 firmware update.

External hard drive is not working on airport time capsule even after 7.7.2 firmware update.
I have the latest Airpor Time capsule 2gb. I specifically bought it so that I could have an external hardrive set up to wirelessly house my itunes library and movies. When i connect the drive, all i get is that the disk needs to be repaired.
the drive can works fine when connected to the macbook pro and I have run the verify and repair features in disk utility. I have also reset the airport timecapsule as well following these changes and still no change.
The 7.7.2 update says that it addressed the usb issue of not showing the drives but there are still problems as I cannot get it to appear.
Please help.
Thanks

How is the hard drive formatted?
Have you tried using a powered USB hub with the drive when it is connected to the Time Capsule?
(The USB port on the Time Capsule is borderline as far as power is concerned....you may need to use a powered hub.....even if the hard drive has its own power supply)
If the drive is formatted correctly....and....it has ample power, it will "show up" when you open AirPort Utility, click Edit, then click the Disks tab at the top of the next window.
In the example below, my Time Capsule drive is named "Backups" and another drive named "WD Drive" is connected to the USB port on the Time Capsule.
You should see the name of your Time Capsule drive (named "Data" unless you have changed the name) and the name of the USB drive if you perform the same check.
What do you see?

Lenova k3 Note Firmware update (296MB) issues

Similar Messages

Maybe you are looking for