Lenovo 14 20DM correct driver for 'Data Acquisition and Signal Processing Controller'

Hi Everyone, I am the happy owner of a new Yoga 14 20DM. A few days ago I made the decision to upgrade to Windows 10. Whilst the upgrade went smoothly I did have to install a number of drivers manually. At the moment I am stuck on trying to install the 'PCI Data Acquisition and Signal Processing Controller' (as shown below). I have tried right clicking on the device then selecting Properties > Driver (tab) > Update Driver > Search automatically for updated driver software, however doing so only shows the screen capture below! Furthermore I have searched the Lenovo support page for a suitable driver however none is available! http://support.lenovo.com/au/en/products/laptops-and-netbooks/thinkpad-yoga-series-laptops/thinkpad-yoga-14/20dm?TabName Finally I have also installed, and run, 'System Update 5' the software program available from Lenovo. However it was not able to install a correct driver for this device. I have done a little searching on this topic, and have read a couple of stories about people installing an incorrect driver for this device, and then experiencing blue screens! Can anybody suggest how I can go about locating and installing the correct driver for this device? Any help will be greatly appreciated. Kind Regards, Davo

Hi Ingemann, Ultimately I decided on the newest version of the Intel Chipset Device Software (INF Update Utility), which at this time (on the Intel website) is version 10.0.27. https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- Interestingly enough I was presented with the message below when I ran this executable. I selected Downgrade (with some trepidation), and after rebooting was pleasantly surprised to see that the troubled device was missing from the list. I can only assume that this means the correct drivers were installed. Thanks you very much for your help. Kind Regards, David

Similar Messages

Driver needed for PCI Data Acquisition and Signal Processing Controller of HP 15- r247tu

Install the Windows 10 Intel IMEI Intel Management Engine Interface (MEI) Driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69593.exe The latest version of the Intel chipset driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69575.exe All Windows 10 drivers available from HP are at the following link.http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7486447/model/7693973#Z7_3054ICK0KGTE30AQO5O3KA30R1

Hi: Try the chipset driver directly from Intel...the second file is the auto install file. https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- If that driver does not install the PCI Data Acquisition and Signal Processing Controller, which the chipset driver should install, download the first file listed above (zip file). Unzip and extract the contents to its folder. Go to the device manager and click on the above device needing the driver. Click on the driver tab. Click on Update driver. Select the Browse my computer for driver software option, and browse to the unzipped driver folder. Make sure the Include Subfolders box is checked, and see if the driver installs that way. Then reboot.

Z600 workstation missing pci data acquisition and signal processing controller driver

I just installed Win7 Pro x86 on my Z600 workstation. It was an upgrade from WinXP Pro. In Device Manager I am missing the driver for the PCI Data Acquisition and Signal Processing Controller and Hardlock USB 1.02. Can someone assist me in finding these drivers. I looked on the Support/Drivers page for this model but couldn't find anything.
This question was solved.
View Solution.

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a professional worktsation.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

PCI Data Acquisition and Signal Processing Controller driver

I've installed win 8.1x64 on my HP Probook 450 G2 but I am missing the PCI Data Acquisition and Signal Processing Controller driver.
Can you please help?
Thanks,
Leontina
This question was solved.
View Solution.

Hi:
Please see if installing the Intel Chipset driver installs that device.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816

Pci data acquisition and signal processing controller -Device software not installed

My pc shows me ,the driver software for pci data acquisition and signal processing controller is not installed on my Device manager.
Please suggest me a suitable solution.

No its not working , Give me an alternate solution.

E5-571 PCI Data Acquisition and Signal Processing Controller & SM Bus Controller

I upgraded from Windows 8.1 to Windows 10. Windows Update says that it is up-to-date. Windows Devices Manager shows a problem with two devices: PCI Data Acquisition and Signal Processing ControllerSM Bus Controller What are these devices and where do I locate the drivers for them?

That should do it. I've been pleasantly surprised by how well older drivers are working in Windows 10. I had to install Vista 64bit drivers for an ATI video card (the latest working drivers for the card) and they actually worked!

Re: Device Manager - Other Device "PCI Data Acquisition and Signal Processing Controller"

I have the same problem and I am not good at PC
Can you show me , in detail , of where can I download that driver please?
Solved!
Go to Solution.

in that case, let's start over.
what OS are you using? is this under a clean installation of windows or a factory installation from lenovo? what device is missing a driver? what lead you to think you needed the above driver?
please be as specific as possible.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

T450s - pci data acquisition and signal processing controller

I am installing a fresh build of win 8.1 and I cannot seem to find this driver. Anyone know what this is?

please install Intel Chipset driver. I fixed mine with it!
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816

Lenovo ideapad yoga 13 pci data acqusition and signal processing center for problem for windows 8

Link to picture
hi everyone,
find original w8 cd and then i installed, when i was installing
i deleted all recovery and other partition, i did not think what can i do,
but then i activated windows and installed all driver, but i taking
after all drivers it stayed
2''unknown devices''
and when i rebooted, it says, usb device not recognized'' and also
''pci data acquisition and signal processing center'' devices problem for windows 8. and touchscreen not working.
i read related for w7 same problem, but what i will do now ?
thanks.
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

hi adilsefaersan,
Welcome to Lenovo Community Forums!
By opening your Device Manager right click on one unknown device and choose properties,
>On the properties windows Click on the Details Tab, on the property drop down Choose hadware IDs
> then copy the value and post back here whats on the Value pane
Do it for all those unknown Device and Post here the Value of the hardware ids
also can you share your Windows Version and bit type so we'll knwo the correct download page for you
Thanks and Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Driver missing - PCIe Data Acquisition and Signal .....

Hello, i recently used Boot Camp to install Windows XP on my 2010 15" Macbook Pro.
All the drivers are working (so far) and i haven't encountered many problems.
However, there is one thing bugging me:
When i go into Device Manager in Windows, and look down the list of installed/uninstalled devices, there is a device called "PCIe Data Acquisition and Signal Processing Controller" which has no driver installed.
I'm PC savvy, but i have never seen this before. My guess is that one of the motherboard drivers is missing, and Boot Camp installer doesn't include that driver?
Has anyone seen/resolved this, and if so, how?
Thanks.
Kaj.

Okay, will do.
Thanks.
Also i wonder if you could help with another problem?
http://discussions.apple.com/thread.jspa?threadID=2758766&tstart=0

CORRECT DRIVER FOR WINDOWS 7 AND HP COLOR LASER JET 4600dn

I'm having a problem with our IT department. My old 4600dn worked great until they started downloading new drivers for Windows 7, which they installed just recently. Now the one he INSISTS I use has only one tray selection.... Auto. I'm trying to print business cards..(absolutely no problem till now).... but he INSISTS that this is the only driver. Then he wants me to choose Pg.....select 1, then MANUAL DUPLEX. That's almost impossible for the printer. I'm almost POSITIVE you have a print driver that will allow me the tray selections I had before he installed Windows 7 and this particular driver. I always used "Tray 1," CURRENT PAGE, it zoomed through the perforated cardstock like a streak!!!! Now, the poor printer is trying to run perforated cardstock through the duplexing unit. Out of 10 pages of cards, I ended up with 1 front printed and 9 pieces of cardstock that stuck in the tray and jammed in the duplexing unit. Is there a CORRECT print driver for this particular printer that will allow all my normal functions to be visible and viable? I don't have the model, nor serial #, as it is work printer and I'm at home now, so I can't get on chat. He is hard to get along with and has been playing games this whole time. I found one driver he inadvertantly left a day and a half ago and printed the cards like lightening, as it used to....7 minutes and I had 200 cards for two different staff members. PLEASE HELP! I think he's leading me down a merry path. It also has to be able to duplex fairly heavy graphic pages...and even the driver he accidently left as an option, won't print the graphics. I just KNOW you have a driver with all the options that will allow it to print to Windows 7 Operating System with all the former options. HELLLLLLLP!
Thanks sooooo much!
Kathi T.
[text removed for privacy]

Any suggestions re correct driver for windows 7 and HP 4600dn?

Satellite P10-504 WXP driver for video, modem and SM bus controller

I have just had to replace the hard disk in my P10-504 and I now have lots of problems!
1 - I used the retore disks and XP home is installed BUT the video, modem and SM bus controller all all flagged in Control Panel and not having drivers installed! The modem I can live without but I would like the video to work properly and the SM bus controller is also pretty essentil. Guess what, I can't
a) find my model listed on the Toshiba website and
b) I can't find drivers for either the video or SM bus controller.
I have downloaded the 'universal' Nvidia driver but it doesn't work! As for the SM bus controller, I've no idea where to look!
Any ideas please?
Thanks
Tim

Hi
Your posting is a little surprise because all XP drivers for your notebook must be available on the Toshiba driver page.
Did you choose the right notebook series and did you download and install all necessary drivers???
As first its important to install the chipset utility and depending on installed graphic card
You have to choose and to install the right display driver!
Again! The drivers are on the page!
http://eu.computers.toshiba-europe.com -> Support & Downloads -> Support page -> driver download

I w'd like to know if LabVIEW 6.0 Application Builder includes the daqdrv (for data acquisition) and serpdrv (for serial communication) support files by default.

Building an application to communicate to a device by serial port

Hi velou
The LabVIEW 6i Application Builder no longer requires daqdrv. Regardless of your Application Builder and LabVIEW version, you must always install the appropriate driver files on the target machine. For example, if your application communicates with a DAQ board and a GPIB board, then you must install NI-DAQ and NI-488.2 on your target machine. If you are using the VISA VI's for serial communication, than you have to install NI-VISA . If you are using the "old" serial VI's, than you have to include serpdrv separately.
Luca P.
Regards,
Luca

Standalone application for data acquisition using NI DAQ card

I have made a standalone application in labview GUI for data acquisition and signal processing. if i have to run this application in any other computer what all softwares should be installed other than labview runtime engine...NI DEVICE DRIVER CD alone is to be installed or do i have to install any other software for data acquisition using NI daq card??
thanks and regards
Solved!
Go to Solution.

You should only need the run time engine, The device drivers for the device, maybe need VISA drivers if you are doing serial or something of that nature, You may need the channels or tasks created in NI measurements and automation if you created them there.
There may be other things that you will need depending on what you include in your code and what tool kits that you have installed.
Tim
Johnson Controls
Holland Michigan

Can I use an external drive for Time Machine and storing other data?

At the moment I have one external drive, a 500gb LaCie. My internal drive is 160gb. I don't think I'll be using all 500 of those gigabytes for a while, so I want to put them to good use. Can I make a partition on this drive and use that for Time Machine, leaving the rest of the drive for my documents and other files? If so, how would I partition the drive? I'm not fluent in Disk Utility and even though I'm pretty sure I know how to do it, I don't want to screw up. Also, how big a partition would you recommend?
While we're here, I have a second question, somewhat relevant to the first. Could I move my Time Machine backups to a second drive if I wanted to? Also, if I used a big drive (say 1tb) could I use Time Machine to backup my current LaCie to a partition on that drive? Thanks in advance.

videoCWK wrote:
Does that also mean that I could back them both up on a very big drive?
Yes. Time Machine will, by default, back up all of your external drives unless you specifically exclude them.
Also, will Time Machine backups eat all my space after a lot of usage?
It depends on what you do on your Mac. If you work often with very large files (video editing, heavy photo editing, big disk images, Microsoft Entourage data file, Parallels disk image file, etc) then your backup drive could fill up very quickly.
I use my Mac mostly for e-mail, web browsing, iTunes, iPhoto, and the occasional iMovie project. I have 92 GB on my main hard drive (60 GB of which are my iTunes and iPhoto libraries, and one iMovie project.) My Time Machine backups consume 155GB on my backup drive, and that's after using Time Machine for a full year.

Lenovo 14 20DM correct driver for 'Data Acquisition and Signal Processing Controller'

Similar Messages

Maybe you are looking for