Lenovo 300 n100 0689 not quite starting. Please help!
Hello my hp blew up. (inverter). And my friends gave me this laptop. I just got the power chord in the mail. This is exactly what happens.
Plug power in. The battery light on the front blinks a few times then stops.
No other lights are on.
I hit the power button and it starts for about 2 seconds (fan is on, no display)
The z light to the left of the power button stays on. Nothing else happens. Hitting the power button does nothing as well. Please I hope there is some kind of solution. Obviously a hardware issue. Hopefully one I can figure out. It sucks being a dedicated geek withouth a dedicated pc :\
Do you know the history of the laptop?
Did it do this before? If so, how did it first happen?
N100s had numerous power problems, some easy
to fix (new battery), and some difficult. Yours sounds like
a difficult one, compared to replacing a inverter on a HP.
First thing I would try is unplug, battery out, and hold down
power button for ~30 seconds. Plug in and try.
Then try removing ram and see if you get a beep at all.
and Try with one ram stick.
and Switch ram in slots.
Post any more info and I, and others? will try to help.
Similar Messages
-
Help with laptop Lenovo 3000 N100 0689-bbg
I have a computer laptop Lenovo 3000 N100 0689-bbg and the computer three days ago stopped up windows at all situations. I used the internal software to restore the computer to factory mode and the operations failed. I've taken computer formath it take two day. When I turn on computer I got this message:
SMART FAILURE PREDUCTED ON HARD DISK 0: HTS541080G9SA00-(S1)
WARNING: Immediately back-up our data and replace your hard disk drive. A failure may be imminent.
Press F1 to Continue
If I press F1 computer stops working and write " Entering SETUP"
Do I change my HD computer will work?
If so, what HD suitable for computer and where can I purchase it?
Can I replace HD alone or contact lab computers?Hi koslav,
Thanks for posting and welcome back to the Lenovo Community,
Am sorry to hear about the issue that you’re facing but I’d like to confirm to you that after installing a new Operating system the machine recovery won’t be working any more,
As I understand from you that you’ve installed the new windows but its giving you an error message I’d like to advise you maybe you can install the windows again and then install application for hard disk scan,
And I’d like to provide you with the contact number for the service support:
Israel
IDEA-branded and
B, C, E, G, H, K, N, Q, V, Y Series Products
1809258990
9AM - 6PM
Sunday - Thursday
Hope the information helps. Let us know.
Regards
Soha
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products
Instead of getting annoyed, read the User's Guide and try basic troubleshooting.
-
I use windows 7 download lightroom 7 trial does not start please help
i use windows 7 download lightroom 7 does not start please help my adobe id [email protected]
Maybe try to download Lightroom 4.1 here:
https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom
Lightroom 7 does not exist
Frans -
How do I update my iOS? I have the iPad 1 and have tried over and over to try and update the iOS version to iOS 5.1, nothing works it will start updating then say that it did not update? PLEASE HELP!!! P.s I'm running newest version of iTunes.
Connect your iPad to your computer and let iTunes back up your iPad. After it does that disconnect it and go into your settings under general and under reset and select erase all content. After you do that reconnect to your computer, open iTunes and follow the screen options to set up your iPad as new. Once it is done doing that see if you have the latest version of iOS installed and if it does then either download gain the apps you had before or restore them from the backup made previous.
-
I cannot send some emails, I can reply but I cannot start an email, an error comes up in outbox stating 'does not allow relaying' please help?
Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works
-
I deleted the mail app and now could not reinstall. Mail repeatedly quits. Please help reinstall mail app on imac. Thanks.
Re-install the OS, the only sure ay to get it back working.
-
my macbook won't start up i have used the option command p r while holding down power button but not done.. please help guys
It not polite to repost asking fro more help three minutes after initial post.
Recovery mode is Command & R keys after depressing and releasing the Power button for a normal startup.
OS X: About OS X Recovery - Apple Support
That only works for Lion and later.
What exactly happens when your try to boot to Recovery?
Try starting in Safe Mode resetting the SMC and NVRAM/PRAM
OS X: What is Safe Boot, Safe Mode?
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
What model MacBook Pro and what OSX version was on the Mac?
Have you tried booting from an OSX install DVD?
When you try to start doe the Power light light?
This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum. -
how do I convert a standard user to an administrator if i have no other admins on the computer, re-bootimg NOT an option, please help!!!!!!
Please take these steps to restore administrator privileges to your account. This somewhat tedious procedure is only necessary if you've confirmed that no adminstrator account exists on the system.
If you don't already have a current backup of all your data, you must back up before taking any of the steps below. Ask if you need guidance. You won't need the backup unless something goes wrong—which is always a possibility.
Step 1
Start up in Recovery mode. The OS X Utilities screen will appear.
Step 2
Take this step only if you use FileVault 2. Launch Disk Utility, then select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
Step 3
Select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Select your startup volume if not already selected. Pull down the menu labeled
Select the user account
and select
System Administrator (root)
Follow the prompts to set a password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9. I suggest you write down the password. If you don't write it down and forget it, you'll have to start over from Step 1.
Select
▹ Restart
from the menu bar.
Step 4
This step, like Step 2, applies only if you use FileVault. Log in as usual, then select
▹ Log Out...
from the menu bar, or press the key combination shift-command-Q. Don't restart. You'll be returned to the login screen.
Step 5
At the login screen, click Other... Enter "root" (without the quotes) in the Name field, and enter the password you set in Step 3 in the Password field. You should now be logged in as root. This is a potentially dangerous condition. Do nothing while logged in as root except as indicated below. You'll be fine as long as you don't deviate from the plan.
Open the Users & Groups preference pane. Select your usual administrator account in the list of users and check the box marked
Allow user to administer this computer
You'll be prompted to restart. Do that and log in as yourself—not as root. Your administrator status should now be restored.
Step 6 (optional, but recommended)
Follow the instructions in this support article under the heading "Disable the root user." You must authenticate in Directory Utility as "root" with the password you set in Step 3. Authenticating as another administrator won't work.
Credit for this idea to ASC member wessongroup. -
I go to settings and switch "Automatic time" off and then back on. It works for a while, but then just goes back to being off. I've tried manually setting the time, but it just goes back to what it was before. If I send a text, it sends and then disapears. I can't see what I wrote! I went in to Apple to try and get it fixed, but they just restored my phone. It's still not working. Please help!
It's not hacker or a virus. You are experiencing what a number of users of iOS 5 are experiencing now - sluggish or less than perfect iPad performance. It seems that for some of us - memory management has gotten a little out of whack with this most recent update. Some of the basic troubleshooting steps that you can try are ....
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Close apps in the recents tray. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If you have Safari crashing issues - Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
None of these steps should be necessary as part of your daily routine - the iOS is supposed to handle all of this without any user input. Once again - for some of us - the iOS is letting us down.
Until Apple releases another update that resolves this issue for the "few" that suffer, keep these steps in mind and use them as needed. -
Hi, I have the iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!
Hello Glittergirl68,
Thank you for using Apple Support Communities.
It sounds like the function to reseize the Font in an iBook is not functioning properly.
I recommend a few things here. First close all the apps that are running in the background:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
From: iOS: Force an app to close
http://support.apple.com/kb/ht5137
When you have done that, restart the phone, and try again.
If the issue persists, I would follow these steps from the article:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
2. Check for app updates
You can setup apps to update automatically in Settings > iTunes & App Store, but make sure that your apps are up to date:
Open the App Store and tap Updates. If updates are available, tap Update All.
If prompted, enter your iTunes Store account information. App Store will then download and install the app updates.
Note: Some apps may require a Wi-Fi connection to update.
3. Install another app from the App Store
If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install an app that isn't already installed on your device to reset this information. You can also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
4. Restart the app
If the issue affects only a single app, try closing just that app.
5. Restart your device
Turn the device off and on.
6. Reinstall the affected app
Remove the app from your device and reinstall it:
Tap and hold any app icon on the Home Screen until the icons start to wiggle and show a small "x" in the top-right corner of the app.
Tap the "x" in the corner of the app you want to delete.
Tap Delete to remove the app and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the app and then download it again.
All the very best,
Sterling -
I try to download the OS X Mountain Lion, and I keep getting an error saying, "The product distribution file could not be verified. It may be damaged or was not signed." Please Help!
If you have Intego VirusBarrier X6 installed
1. Open /Applications/VirusBarrier X6.
2. Click on the "Surf" button.
3. Click on the "Ad Banner Filter" tab.
4. Click "OFF" next to "Banner advertisement filter".
5. Start the computer in Safe Boot, then restart the computer into normal mode.
If don't not have Intego Virus Barrier installed
1. Verify that the date and time is correct on the computer.
2. Safe Boot once, then restart normally, then try downloading again.
3. Try with a different user account if the issue persists
If the issue persists
Install Lion onto an empty partition (internal or external).
Note: You can Use Disk Utility to live partition the internal drive and create a second partition large enough to install Lion.
Start from the clean installation of Lion.
Download Mountain Lion from the Mac App Store. Note that the original startup disk can be set as the destination for Mountain Lion during the installation process. -
I have a 4s with ios 6 but when I place a call I can't hear the person I' m calling, the volume is high but it's not working. Please help.
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
Not getting Result please Help
Hi All
query_string VARCHAR2(2000);
query_string are EMPNO,ENAME
for rec1 in (SELECT query_string FROM p_table_name ) loop
utl_file.put_line(v_file, rec1.result1);
END LOOP;
not getting Result please Help
RegardsYou may look at this:
michaels> DECLARE
cur sys_refcursor;
query_string VARCHAR2 (2000) := '';
p_table_name VARCHAR2 (30) := UPPER ('emp');
p_stmt LONG;
BEGIN
FOR c IN (SELECT ROWNUM rn, column_name, COUNT (*) OVER () cnt
FROM user_tab_cols
WHERE table_name = p_table_name AND hidden_column = 'NO')
LOOP
query_string :=
query_string || c.column_name
|| CASE
WHEN c.rn != c.cnt
THEN ' || ''|'' || '
END;
END LOOP;
p_stmt := 'select ' || query_string || ' FROM ' || p_table_name;
-- DBMS_OUTPUT.put_line (p_stmt);
OPEN cur FOR p_stmt;
FOR rec1 IN (SELECT EXTRACTVALUE (t.COLUMN_VALUE, '/ROW//text()') result1
FROM TABLE (XMLSEQUENCE (cur)) t)
LOOP
/* replace with utl_file in case ... */
DBMS_OUTPUT.put_line (rec1.result1);
END LOOP;
CLOSE cur;
END;
7369|SMITH|CLERK|7902|17-DEC-80|800||20
7499|ALLEN|SALESMAN|7698|20-FEB-81|1600|300|30
7521|WARD|SALESMAN|7698|22-FEB-81|1250|500|30
7566|JONES|MANAGER|7839|02-APR-81|2975||20
7654|MARTIN|SALESMAN|7698|28-SEP-81|1250|1400|30
7698|BLAKE|MANAGER|7839|01-MAY-81|2850||30
7782|CLARK|MANAGER|7839|09-JUN-81|2450||10
7788|SCOTT|ANALYST|7566|19-APR-87|3000||20
7839|KING|PRESIDENT||17-NOV-81|5000||10
7844|TURNER|SALESMAN|7698|08-SEP-81|1500|0|30
7876|ADAMS|CLERK|7788|23-MAY-87|1100||20
7900|JAMES|CLERK|7698|03-DEC-81|950||30
7902|FORD|ANALYST|7566|03-DEC-81|3000||20
7934|MILLER|CLERK|7782|23-JAN-82|1300||10
PL/SQL procedure successfully completed. -
I updated my itunes and now every time i try to play a song 'internal error' shows up and itunes quits. Please help me....
Hi Dance4Life85!
I have a couple of troubleshooting suggestions for you regarding this issue. First, I would suggest that you reinstall iTunes, according to the instructions in this article:
OS X Mountain Lion: Reinstall apps that came with your Mac
http://support.apple.com/kb/PH11201
To reinstall iTunes, download it from the Apple Downloads website.
Apple Downloads website
Note that all you will need to do is download iTunes and install it again, it will install over the version that is on your computer right now without issue. If your issue persists, you may want to see this article about troubleshooting third-party plugins for iTunes:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/TS3430
Lastly, if neither of these resolve the issue, then you may need to recreate your iTunes library. More information on this can be found here:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Thanks for being a part of the Apple Support Communities!
Regards,
Braden
Maybe you are looking for
-
Non valuated sales order stock-help reqd
Dear Experts, My client is into Pipe coating business who receives the pipe from the customers, coats it as per there requirements and dispatches it thereon. There is no concept of FG here as its only the service he is doing on it and also when he re
-
Adobe Acrobat Pro X 10.1.7 (Mac) does not print correctly.
I have a Mac Pro (Model 1.1) with Adobe Acrobat X 10.1.7. When an item is scanned, it appears correctly on the screen, but it does not print correctly. I am sending along screenshots of what a scanned item looks like on the screen and then what pri
-
How do I get iTunes to read music from two drives?
I recently bought an external hard drive for my laptop to transfer some of my music files that I don't use a lot. I have transfered these files but when I go to play them from iTunes it can't find them and I have to manually locate each song, after t
-
PSE 11 Organizer - deleting keyword tags
I feel silly, but I can't find a mechanism to delete a keyword tag. The online helps says you do it in the tag panel, but then doesn't explain how.
-
Dear colleagues, A semi-finished product, letu2019s say material AA, is produced, in-house, in 2 plants, say plant 1000 and 2000, with different price. This material is then transferred to plant 3000 from both plants where it is transformed to finish