Lenovo 3000 and a secondary monitor

I have a Lenovo 3000 V100 Laptop. I want to use a secondary monitor/display. I see the display on both the primary and secondary monitors until windows finishes booting and then the secondary monitor goes blank. I try FN F7 to no avail. I am using windows XP. I assume this is a setup problem.
Please advise.
David

Not having your exact model, try this.
Go to your desktop display.
Position your pointer over part of the display without any icons, open windows, or tasks.
Right click.
A menu should appear, click on "Properties" or "Graphics Properties" whichever is on the menu. This should open another menu, one tab on which can be selected to allow you to display the same thing on the internal and an external monitor. The graphics adapter software on my Lenovo displays its menu this way. I'm not sure if going through the Control Panel selection will get you to the same point.

Similar Messages

My secondary monitor flashes and blacks out after the 10.7 install. Any ideas on how to fix this?

I have installed 10.7 and the secondary monitor flashes and blacks out. I downgraded back to 10.6 and the problem went away. I reinstalled 10.7 and the same problem happened again. The monitor blacks in and out especially when the pointer is placed in the dock area, but it still happens all the time. My secondary monitor is a ViewSonic 22 inch that is connected to a DVI to display adapter. Any solutions??
Thanks

Talked to AppleCare and it's most likely the fact that my MacBook has 3.0 USB ports and my non official charging cable can't support that. So yeah, I'll try a new cable, hopefully that's the fix.

Lenovo 3000 n200 problem with usb tv-stick

hi guys,
i have a problem with my lenovo 3000 and the hvr-900 usb tv-stick from hauppauge. driver installation and software installation from wintv is no problem. finding the channels ist also no problem. sound is good but i have no pictures... the display ist black.
my grafik chip is the intel GMA X3100 onboard. i thought it was a problem with the overlay function. the wintv software shows me "surface vmr" on my old desktop with the old wintv pci card it shows me "surface overlay".
internet tv (tvu, tv ants...) works without any difficulties. but i can`t find a function to activate "overlay".
has anyone an idea? thanks for helping.

i try an older usb machine from hauppauge which supports analog only (the new stick supports analog/digital) and... it works... the wintv software shows me "surface overlay"... crazy...
now i use this until i find a solution for the stick ;-)
thanks for helping

Lenovo 3000 N200 0769 A42 not booting anymore

Hi,
We have a Lenovo 3000 N200 0769 A42 that is not booting anymore. Concretely, when the on/off button is pressed, the fan goes on for a few seconds, the HD led is switched on and the CDrom is running for a few second too, then nothing else, except the "On" led that remains switched on...
I tried this: http://forums.lenovo.com/t5/Lenovo-3000-and-Value-line/Help-How-to-reset-CMOS-on-3000-N200-model-076... to no avail.
I removed the keyboard and unplugged for one minute the only plug I found with red and black wires, to no avail either...
The computer seems dead... Any suggestion to reanimate it?
Thanks in advance,
Pierre

Hi, Thank for the reply.
There is nothing displayed on the screen and no access to the Bios.
I did tried to reset the motherboard after having removed the AC power, the battery, the HD and the RAM (by short cutting two exposed metal traces labelled CLRP1 and by unplugging the battery cable found behind the keyboard. To no avail...
I realize that the url given in my first post does not work. Here it is:
http://forums.lenovo.com/t5/Lenovo-3000-and-Value-line/Help-How-to-reset-CMOS-on-3000-N200-model-076...
Thanks again for the suggestion. Any other?
Pierre

Problem with Lenovo 3000 N200 0769 Laptop

Hi all,
I'm new here and hope someone can tell me whats wrong with my Lenovo 3000 N200 0769. Two days ago I got up in the morning and turned on my laptop, it started and shut off about 3 seconds later. It does it every time I try to start. I was able to get the windows intro, and then could not sign in as the keyboard didn't work. When I unplugged the power cord it immediately shut off. Is it a Battery malfunction thats caused this or a Virus? PLEASE I need some help here!! I googled it and on some other sites some said it was the Battery. Thanks very much.
Regards,
Michael

Also, with the battery out and AC unplugged, press and hold the power button several times. Then, re-attach AC and try to start it up. You could go into BIOS and reload BIOS defaults (that's an option) save and exit. Try to start up normally again.
If the system boots up only part way, hangs, or shuts off then I would tend to think the fan & heatsink could be clogged. See this article on cleaning.
http://forums.lenovo.com/t5/Lenovo-3000-and-Value-line/Lenovo-3000-Fan-amp-Heat-cleaning-N100-exampl...
The N200 is very similar to the N100 in this regard.
If the fan and heatsink are clean, I would check the battery - these systems don't like to run with just the AC. Try to see if it will start up from just battery with no AC, or start with battery in and AC, and then unplug AC. If it shuts off, then the battery is defective and should be replaced. Most of these, especially N100 seem to do much better with a good battery.
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Detect displays seems to have quit working? The secondary monitor is bleeding into the MacBook Pro monitor. How can I fix this?

I am using a MacBook Pro 2009, Snow Leopard (OSX 10.6.8). All of a sudden last night after a long day of work, my monitor resolution changed without warning and the secondary monitor display started bleeding into my laptop monitor. When I go to detect displays, it doesn't fix the problem. It looks like I need to switch to a larger display setting and the largest setting has disappeared.(The display seems to default to this setting where my screen bleeds into the laptop monitor.) When this started happening last night, I immediately shutdown and restarted to see if this would fix the problem. So far, it's still not looking too good.
I also tried shutting the laptop and using the external monitor only. When I do this, the monitor freaks out and keeps flashing on long enough for me to input a password. Then it flashes off, the computer and dipslay goes to sleep and I have to re enter my password to exit sleep mode and the process starts all over again.
Here are screen shots of the two monitors side by side:
http://danisco.files.wordpress.com/2013/07/monitors.png
(Notice the weird overlap - it's not keeping me from working, but it's super annoying!)
Any ideas on how I can try and fix this? OR do I need to get help from Apple directly. Thank you in advance for any suggestions on this!

Okay - this issue seems to have resolved on it's own. Yea!
I did find a thread that suggested resetting the PRAM/NVRAM so I did this, restored the external monitor to factory settings and went into Disk Utility and repaired disk permissions and verified disk permissions.
Here is a link to reset the PRAM/NVRAM: http://support.apple.com/kb/HT1379
These things may have helped resolve this issue. I can't tell what worked because it was hours after I did all these things that my monitor and computer decided they liked each other again. If you have a similar issue, maybe these steps will help you resolve your problem too.
Hope this is helpful!

Lenovo N100 and Fingerprint Drivers on win7...

Hey there! i recently install win7 on my N100 0768-FSG and couldn't find drivers for the fingerprint reader. i looked everywhere! nothing is working! can someone plz help me?

http://forum.lenovo.com/t5/Lenovo-3000-and-Value-line/Windows-7-Drivers-for-Lenovo-3000-N100-MT-0768...

Lenovo 3000 N200 0769-ALU Dual Monitor Support

My nephew has a Lenovo 3000 N200 0769-ALU, downgraded from Vista to XP. Does this notebook support Dual Monitor Extended Desktop configuration? If so, how is this configured?
My nephew lives in a different city, so I am not able to just go over and lay w/ his machine. I am familiar w/ the dual monitor support on my HP LapTop, but am not sure what to look for on the Lenovo. Assistance is appreciated.
~ K

Computer is working now. The hibernation is still a problem.
I got a question though, i have SATA mode disabled now, but i'd like it to be enabled. How do i install this driver:
http://www-307.ibm.com/pc/support/site.wss/MIGR-67897.html

Lenovo S531 va USB 3.0 Docking. No secondary monitor?

Hi. I have been having the strangest of problems with my Lenovo S531 and usb 3.0 docking. I recently first-time installed windows 7 and updated the the machine completely. I then installed the USB 3.0 docking, and everything worked great just a few days ago. When I started to use the computer again yesterday, my secondary monitor did not come on at all. At first I thought it was just a windows bug, so I restarted the machine, but when it came back on the problem still occurred. Then I tried switching to another monitor of the same type...and nothing. This was starting to get really strange, so I tried to reinstall and update to the latest docking drivers, but still nothing! At this point I started to get desperate so I tried multiple ways to install the drivers towards the docking, and nothing. I even tried to use a new and unopened docking (identical to the one I was using) and the same problem still occurred! *taking a deep breath* I have no idea what is going on, and for some reason all my devices in the device manager is gone to. Is there anyone who have experienced a similar problem that can help me?
P.s I have tried to identify the monitor through the screen resolution tab, but it seems like the monitor is not even plugged in. (have also tried to just plug the monitor directly in my computer without the docking, and that works just fine)

The adapter should work for any machine with USB 3.0.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Windows 8.1 screen bounces between primary and secondary monitors

I have a Lenovo T530 laptop with a docking station and a IBM monitor L200P attached to it.
Up until yesterday, this configuration was running Windows 8 Pro with no issues.
However today, after I installed the Windows 8.1 upgrade, I started having problems with the screen bouncing between the primary and secondary monitors without my intervention. The problem happens very regularly, regardless of whether I have selected the laptop as primary monitor or the IBM monitor attached to the docking station.
I verified that the problem does not happen with Windows 7 and Windows 8 installation and only starts appearing after the Windows 8.1 upgrade is applied.
Does anybody have similar problems
Thank you in advance.

O''philipp [[#answer-697652|said]]''
<blockquote>
another thing you could try is this: enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''layout.css.devPixelsPerPx'''.
double-click it and change its value to '''1.2''' (or any other zoom factor that fits your purpose: 1.0 relates to 100%, 1.2 equals 120% and so on; -1.0 is the default value and will adhere to the system settings).
</blockquote>
Okay, I tried it, set it to 1.2 and even more stuff got blurry and fuzzy. Besides everything in the FF menu bar everything in the header on youtube and a few other pages did it too. It did make the pages fill the actual page better, but the blur is worse than this prob so I set it back to -1.0.
Any other ideas?

Lenovo 3000 N200 ( 0769- A63) 0769 BAG processor upgrade limit and type

i have folloing system properties
TYPE
0769-A63
07/12
Name
Lenovo 3000 N200 Notebook (0769-A63)
Specs
Based on 0769-BAG: T2330(1.6GHz), 2GB RAM, 120GB 5400rpm HD, 15.4in 1280x800 LCD, Intel X3100, CDRW/DVDRW, Intel
802.11abg wireless, Bluetooth, Modem, 10/100 Ethernet, Secure chip, Fingerprint reader, Camera, 6c Li-Ion, DOS
License
Chipset: Intel 965 Express Chipset probably
i want to upgrade my processor to core2duo etc
what will be the type/types of processor/s that can be used to upgrade it and what is the upper limit of speed of processor that can be attached
thanks
Moderator Note; s/n edited for member's own protection

Wow, thank you, what an awesome little tool!
So, I found that these 2 RAM products are compatible with my laptop:
Part Number: CT758799
Module Size: 2GB
Package: 200-pin SODIMM
Feature: DDR2 PC2-6400
Specs: DDR2 PC2-6400 • CL=6 • Unbuffered • NON-ECC • DDR2-800 • 1.8V • 256Meg x 64 •
Part Number: CT699699
Module Size: 2GB
Package: 200-pin SODIMM
Feature: DDR2 PC2-5300
Specs: DDR2 PC2-5300 • CL=5 • Unbuffered • NON-ECC • DDR2-667 • 1.8V • 256Meg x 64 •
I then went to a well-known auction site and found RAM cards from the same manufacturer with exactly the same specs as above but with different Part numbers. Does it have to be the exact part number or do I stand a good chance of it working if it has the required spec? I searched for the exact part numbers and yielded 0 results.
Thanks for all your help on this.

I have just upgraded. AND now I can't view video fullscreen on my secondary monitor?!! Why!

I have a dual monitor set-up, with sharing. I am on a Mac OS X Version 10.7.5
I am viewing my Firefox window on my secondary monitor. (NOT Primary) When I click any video to full-screen it loads the full-screen on my primary monitor. When I click the window to full-screen (on my secondary monitor) it fills the primary monitor.
Before I upgraded, this morning, I could click the full-screen button and my video would appear on the secondary monitor. (The same monitor.) Before this morning, I could re-size the browser window to full-size and view it in my secondary monitor. (The same monitor!)
So, explain to me, why the change? Why is it when I click on a video to enter full-screen, or want to re-size a window to full-screen on my secondary monitor, it views on my primary monitor. Does this make any sense?
Why? Why would somebody want to browse on one monitor, want to watch something fullscreen, click a button and then watch it on another monitor? I just don't get it. Or why would someone be browsing in a window on one monitor, click full-screen, and want to browse in the same window on another monitor?
I am sitting here facing my secondary monitor (which I use as my art-board) and my primary monitor sits to my left. I mainly work from my secondary monitor, so when I am drawing, painting and designing my cursor doesn't 'run into' my dock features, calendar, ext. When browsing in Firefox my window is where it should be, in-front of me. So why would I want to watch a video or browse the web on my left? Why? Why would any developer or designer do this! Especially considering the second, non viewing screen is black! Which means my secondary monitor (in-front of me) is black.
When I click, view full-screen, whether video or resizing windows, whether it is my primary or secondary monitor, don't you think the screen should appear full-screen in the monitor I am using?! Right?! I mean somehow you calculated a way for Firefox to recognize which monitor to reopen in. So what's up? I didn't have this problem last week? So tell me . . . why can't I open a video in full-screen on my secondary monitor like I have been doing for years? Why am I even having to write a complaint about something I used to be able to do. AND NOW I CAN'T.
I just checked Safari. Wow. Look at that! When I want to view a video in full-screen in the appropriate monitor I can! Wow! I can actually click on my secondary monitor and it's recognizes I want to watch the video on the same monitor.
I used to be able to do this in Firefox. I guess it is time to give up on Firefox. And choose a company who understands user-perspective. Or at-least understands what an upgrade is.

Try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to enable execute-disable bit and other hidden settings on Lenovo 3000 N200 model 0769!

2008-11-16: I have posted some more settings, scroll down to message 19 in this thread to read them.
Hi,
Here's some good news for anyone with a Lenovo 3000 N200 model 0769, who is disappointed and frustrated with the lack of options in the BIOS setup menu. (I had a moan about that in this thread.)
This is a long post but I hope you'll find it worthwhile. Here are the features/settings which I will explain how to enable:
The BIOS disables the execute-disable bit function of the CPU, with no way to turn it on. You can enable it.
You can set VGA and VESA graphics modes to not be stretched to fill the whole screen (sharper graphics with no distorted aspect ratio).
Speed up the POST display by skipping the memory test
Disable various features (if you don't use them, that might save some power): the HD audio controller, WLAN card, on-board LAN, shadowing of the video BIOS
Enable beep before booting the OS
Enable key click sound (only in DOS, not Windows or Linux)
I'm still working on this, and hope to figure out more hidden settings soon, e.g. to disable the DVD drive and trackpad, and to change the video output from NTSC to PAL.
The information below applies to the Lenovo 3000 N200 model 0769 with BIOS version 3.03. My N200 has Nvidia graphics. For some background on the general principles/research required to figure this out, please see this thread at Wimsbios.com.
To change the settings, you need to create a bootable DOS floppy disk or USB drive. Download SYMCMOS.EXE (Google for it) and put it on the bootable disk. Boot the disk and run SYMCMOS to back up your current CMOS settings: SYMCMOS -Lsettings.txt
Next load the settings.txt into a text editor. It will begin like this:
( SYMBOLIC CMOS EDITOR - Version 643710-035 )
CRC = 3EDD
(0000) [0001]
(0003) [0001]
Your CRC value may differ. Each line after the CRC contains a token number, followed by the value of that token. You can start with the settings.txt you created and edit any tokens you want to change, or delete all token lines and just include the tokens you want to change. Then use SYMCMOS.EXE to apply the new file: SYMCMOS -V2 -Uupdate.txt
After running that command you can reset, and hopefully notice the new settings in action. (For certain settings, such as re-enabling the execute-disable bit, you need to turn the computer off then on again.)
Here are some specific tokens you can change:
Token Default New Description
(0000) [0001] [0000] Disable the HD audio controller
(0042) [0001] [0000] Disable LCD panel graphics scaling/stretching
(004B) [0000] [0001] Beep before booting the OS
(0267) [0001] [0000] Enable support for the CPU execute-disable bit
(028E) [0000] [0001] Enable key click (only works in DOS and BIOS setup)
(02A3) [0001] Set to 0 for slower memory test, or 2 (or 3?) to skip
test for faster booting, especially with 4GB RAM
(046E) [0001] [0000] Disable video BIOS shadowing. (Best to leave enabled.)
(0471) [0000] [0001] Enable 1MB memory hole at 15MB. (Best leave disabled.)
(0486) [0001] [0000] Disable PCI Express ports 1-6. This takes precedence
over the individual port bits below, and disables the
LAN, WLAN and (probably) ExpressCard port.
(0489) [0001] [0000] Disable PCI Express port 2 (WLAN card)
(048C) [0001] [0000] Disable PCI Express port 3 (maybe ExpressCard?)
(048F) [0001] [0000] Disable PCI Express port 4 (LAN)
For example, if you want to disable LCD panel scaling and enable the execute-disable bit, you would create a text file like this:
CRC = 3EDD
(0042) [0000]
(0267) [0001]
Some final points:
Loading the default settings in the BIOS setup menu will overwrite any changes you make using SYMCMOS.EXE. So keep that bootable disk around in case you need to re-apply your settings in future.
The token numbers above are specific to version 3.03 of the Lenovo 3000 N200 model 0769 BIOS. They might be different for earlier BIOS versions, and will be different for other models of computer.
Once you have created a bootable floppy disk with a text file containing your updated settings, you could create a bootable CD with the floppy's data on. Just boot that CD to restore your settings in future.
Before experimenting with randomly changing token values to discover other hidden settings, make sure you know how to reset your computer's CMOS memory! Changing some settings results in your computer becoming unable to boot, so you can't use the BIOS setup screen to reset. I wrote about how to reset the N200 model 0769 CMOS in this thread.
If you discover any other settings, please let me know.
Any changes made are at your own risk; if you "brick" your laptop don't blame me!
Message Edited by Donuts on 10-15-2008 09:45 AM
Message Edited by Donuts on 11-16-2008 11:35 PM

Hi Donuts !
My computer is a 3000 N200 0769BAG. It has a Dual Core Pentium and the information I get about the BIOS using lshw are :
========================================================================================
description: BIOS
          vendor: LENOVO
          physical id: 0
          version: 68ET35WW (04/16/2008)
          size: 106KiB
          capacity: 960KiB
          capabilities: pci pnp apm upgrade shadowing escd cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot biosbootspecification
====================================================================================
I've nothing telling me it is a 3.03 BIOS version but only got the BIOS file name (68ET35WW);
Is it the same BIOS you used and if not how could I find the list of (token, default value,new seting) for that particular BIOS ?
Thanks a lot in advance for your help !
Regards

Windows gets rearranged in Windows 8.1 and secondary monitor when computer goes to sleep

I have a MacBook Air 2013 with a secondary monitor installed through a mini-display port-HDMI cable. I also have bootcamp installed in Windows 8.1 64 bits with all the latest drivers installed. The problem that I have is that when the computer wakes after it goes to sleep, all the windows in the non-primary monitor moves to the primary monitor and I have to re-arranged them all over every time.
What I tried so far:
1. Installed the latests drivers from Microsoft and Intel HD Graphics 5000.
2. Look for the DMMEnableDDCPolling in the registry. (not found only available for ATI cards)
3. Change the mini-displayport-HDMI cable for a new one that doesn't transmit the "power" so that computer do not detect that the monitor was shutdown.
4. Change the resolution on boths monitors to native resolution
5. Change the primary display from external monitor to laptop monitor
6. Changer HKLM\Software\Microsoft\TMM\UseIViewHelper from 1 to 0
7. Try to get an answer from Apple, Intel and microsoft support.
Similar threads where I found this info:
Link 1
Link 2
Link 3
PLEASE HELP! I Don't know what else to do!
This do not happend on MacOS, is happends only in Windows.
Thanks, Andres Rormoser.

The only solution that I found so far was to install Actual Window Manager, separate the secondary monitor in tiles, assign each window to each tile, add a shortcut to start/stop ActualWindowManager and every time the computer wakes up with the windows re-arranged I press the shoutcut and everything goes back to my predifined layout.
http://www.actualtools.com/?ref=aim814_prg

Resolution Xtra and secondary monitor

Hi
I'm using Resolution xtra to change the resolution on my
monitor
My PC with windows XP has 2 monitors
And when I change resolution for primary monitor, using
function
cSuccess =
gResXtra.set_resolution(cResWidth,cResheight,cResMode,gResXtra.get_primary_display())
then resolution on secondary monitor is also changed. I'm not
sure but it
can be that resolution on secondary monitor changes to some
other dimentions
as on primary monitors
Any suggestions?
Any help will be appreciated
game_dev

Depends ALOT...
There are graphic cards where the resolution set in the first
monitor must be equal to the second, and so the driver itself will
adjust the second one when the primary one is changed.
On windows can you set-up different resolutions? Or are the
resolutions linked up? [one way to link them is to have a "wide"
virtual monitor that some other drives allows to configure]
Hope it helps,
Kindaian

Lenovo 3000 and a secondary monitor

Similar Messages

Maybe you are looking for