Lenovo 3000 H series computer boots up to a small blinking blue square on a black screen

The computer powers on but after the Lenovo screen, the screen goes blank with a small blinking blue square on the left hand side and that's it?
Anyone experienced this and know what could be the problem?
Message Edited by Bloome on 07-15-2009 12:39 PM

How long have you had this PC? HDD's usually do good to get 5 years of usage out of them. Some good HDD's can last a few years longer. But it does look like your HDD's is corrupt and may be dying on you.
Windows can be reinstalled over itself and will rename and put the old files in a .old folder for you to go through. But yours is dying all together from the looks of it.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Similar Messages

Step by step how to set up bios to boot XP on Lenovo 3000 K Series???

Dear all,
Im trying since several day to install the xp on my PC but it doesnt work. Ive also tried to install recovery DVD that Ive got with the PC but every time it appears same message that Ive a problem with my hard disc and Ive to fix the problem in BIOS. I was hurd trying but no luck. I know that Ive to change the AHCI to RAID but I cant find this option in the BIOS.
I would please anyone who can give a step by step how to set up bios to boot XP on Lenovo 3000 K Series.
Thanks in advance.
Solved!
Go to Solution.

Hello,
Ive solved the problem by taking the battery out for some minutes to clear up the BIOS.

Pls i need help for audio driver for lenovo 3000 j series

hello, can sombody help me to find driver for lenovo 3000 j series audio driver.
i did format to my computer and reinstall windows XP and now i don't have audio, i already downloaded all drivers from lenovo website and nothing is working. pls pls help. thank's.

If you are using Windows Vista go to All Programs/Palm and click on the folder and select Hot Sync Manager and then try to sync with the USB cable. If you are using the Windows XP go to Start/Programs/Palm/Hot Sync Manager and then try to sync. If you don’t have the palm folder at all on your PC you have to install it. Here is the link http://kb.palm.com/wps/portal/kb/common/article/33219_en.html that version 4.2.1 will be working for your device Zire 72.

Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?

Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?

Can you start Firefox in [[Safe mode]] ?
You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I have been given a iphone3gs today and after restoring it to factory settings like i was adviced to, my phone now wont boot up past the apple logo, it will switch to black screen if i press both buttons. I havnt managed to sync it to itunes. how do i get

I have been given a iphone3gs today and after restoring it to factory settings like i was adviced to, my phone now wont boot up past the apple logo, it will switch to black screen if i press both buttons. I havnt managed to sync it to itunes. how do i get it to work???

Try to connect in recovery mode, explained in this article: iOS: Unable to update or restore

64 bit and cpu question on lenovo 3000 J 115 computer ?

can the lenovo desktop 3000 J 115 support 64 bit program and os
what is hightest cpu amd sempron support on socket 940
3. are the lenovo recouver disc free or to we have to pay ?
when made lenovo recouver disk 2 time both set where corrupt and the cd-r where all brand new
Message Edited by computerwhiz on 05-06-2008 02:26 AM
Message Edited by computerwhiz on 12-09-2008 11:51 PM
Message Edited by computerwhiz on 12-09-2008 11:58 PM
Message Edited by computerwhiz on 12-09-2008 11:59 PM
LENOVO 3000 j115 TYPE 7387-34A
WINDOW VISTA BASIC SERVICE PACK 1

3. are the lenovo recouver disc free or to we have to pay ? answer on my computer used think vantage to create 6 or 7 cd disks. Believed there is a charge to buy. Call support for more info.
Lenovo 3000 J105 (8258HBU)

Can't boot my T500 anymore... just getting to a black screen after the XP logo

I have a big problem with my Lenovo T500. Never had any problems before. Then yesterday, I could not open OpenOffice anymore, neither convert to pdf from an already open OpenOffice document. I got error messages saying the programmes can't be openend. After trying to re-install Adobe Reader failed, I simply wanted to restart the computer, seeing if that oculd help. And now the big problems started...
Re-booting was not possible. For 20 seconds, it seemed normal. But directly after the Windows XP logo (using
Windows XP Professional 1), the screen went black and that was it. I see the mouse cursor and can move it, but that's it.
After waiting some time, I turned the laptop off with the power button. And restarted it. This time getting to the screen where I could choose "safe mode" or normal startup, because the computer had been shut down improperly. First I tried normal mode, which lead to the same black page. Then I did the same again and tried "safe mode", which didn't work either - I just got the black screen with the "safe mode" notifier in every corner.
What I tried then was the ThinkVantage button directly when starting the computer. Which lead me to the "rescue and recovery" menu where I could choose what to do: Complete recovery, losing personal files (it's about music, pictures, text documents for me) or quick recovery without losing files. Also there was the option of saving files before through USB. This is what I tried first. I marked 50GB of files and wanted to transfer them. Problem: Every external harddrive or USB stick I connected was not identified. So this failed.
I chose to go with "quick recovery" first then. This took about 20mins. When it was done there was an automatic re-start which unfortunately got stuck at the black screen again...
3 more re-starts using the power button did not bring anything either. The ThinkVantage button does not let me access the rescue and recovery menu anymore. It just says something like "checking the system" and then there is an automatic re-boot, which ends up at the black page.
I am mighty scared now that I lost my computer and the data on it (I have backups for most things, but still).
Does anyone know anything that could be done now? I do not have XP or anything, by the way. I bought this computer used a year ago and got it complete with XP installed (although I do have the product key). The warranty from the place expired 5 days ago and the place is in Germany, but I live in Sweden. They told me they can't help me but I should contact a local repair place.
If anyone has an idea about what the problem could be (virus??) and maybe some help, I would be VERY VERY thankful.

Maybe I should add that I probably didn't do the best thing with anti virus programs. I used Microsft Security Essentials, which was installed when I bought the computer.
When downloading some program (not sure whether it was Acrobat Reader), I was asked to get McAfee. Kind of weird, I had said no. But McAfee somehow checked my computer and told me my MP4 player contained a trojan. That was 5 days ago. Security Essentials couldn't find it, even scanning the MP4 player directly. I guess I should have switched right away and to get McAfee to remove the thing? Maybe this is what caused all the trouble...

Lenovo 3000 y500 series

No driver is found how can I down load

Hi @sauravthe1,
drivers/manuals for your Ideapad can be found here: http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-y-series-laptops/ideapad-y500-notebook

Lenovo 3000 H series

What type of wireless card is best for this computer? Please advise. Thank you.

Try to find out if Lenovo exclusive stores have your desktop's accessories.All of them are within New Delhi
4 Square computers
C-56
Thana RoadBhajanpura 110019
64615577
9971313256
Advance Computer Shoppe
D 118 Fatch Nagar
20 Veer Savarkar Block 110018
47700000 / 47700008
9818889988
Digital infosolution
110 1st floor, Aggarwal city plaza
Mangalam plaza sec 3, M2k Rohini 110085
2794260
9810181600
Neotec
Headoffice 313
vishwadeep building ,District centre Janakpuri 110019
41570499
9810553823 / 9350530499
PSPL Infosystem (P) Ltd.,
E-62, Vikas Marg Metro Piller-46
Next To Hira Sweets Laxmi Nagar 110092
47656946 47656946
9810075760
Real Computers
H 68/5 Bali Nagar
Bali Nagar 110015
25414221 25109480
9811093633
Unique Infoways P Ltd
G-1, G-2, Gedore House
51-52 Nehru Place 110019
30930930
9650699544
46560244
Vcl Infotech Pvt. Ltd
F7C, 1St Floor, Janak Place
District Centre, 110058
9818787326 9891353943
011-25573081 / 82
Venkateshwara Distributors P. Ltd
B-886,Ramphal Chowk,Dwarka Sec-7
Palam Extn. 110075
8527494475 47094588
8527494475
Venkateshwara Distributors P. Ltd
Shop No-5
Jd-20A,Sfs Flats,Pitampura 110034
8750876444 27315844
8750876444
Tab Enterprises
304, Raja House, 30-31,
Nehru Place 110019
46681666
8800668669
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Xorg.conf is deleted. When computer boots output is too small to read

I was experienceing another error with xorg and noticed that my xorg.conf wasnt configured fully so I was going to go and reconfigure it.
Long story short, I have deleted my xorg.conf and need to regen a new one.
Problem:
My output is to small to read.
I have tried the "Arch Fallback" Grub option. it still goes to runlevel 5. If anybody knows how to get the thing into runlevel 3 that would allow me to not format and save lots of time.
Also i tried sshing into it and I get "connection refused" So i must not have ssh on. ... its not really important for this box as it is only a desktop box.
Last edited by chmoder (2009-02-27 03:40:20)

chmoder wrote:
[tcross@Tom-Arch ~]$ scrot -cd5
Taking shot in 5.. 4.. 3.. 2.. 1.. 0.
Xlib: extension "Generic Event Extension" missing on display ":0.0".
[tcross@Tom-Arch ~]$
This is why i deleted my config file. am a wrong in thinking this is a misconfigured xorg.conf?
I looked arround and it sounds like i need to manually compile X. that sounds like it wont work to me. but maybe. I have an ATI 4650 using the proprietary driver. buying and ATI card was the worst choice i think.
Yes, you're wrong. That error means nothing, and can safetly be ignored (as annoying as it is).
And no, you shouldn't need to compile X.

Blue hp circle on black screen, can\'t access boot options for recovery disk

I installed Symantec full disk encryption and encrypted the hard drive. Then I restarted the pc. I get a black screen with a blue HP logo in the center. Message at the bottom right sysa press the ESC key for startup menu, but no key works. Every key pressed gets a beeping sound. If I turn power off and then on and press the different f keys, I get different messages but still no response from any keys.
Symantec sent me a recover disk to deencrypt the drive but I can't get the pc to load from the drive. Any thoughts?. I have hard reset the pc twice ( battery and power cord out, hold power button for 30 seconds)
This question was solved.
View Solution.

I would remove the hard disk and then power up the notebook to see what response the BIOS has.
From your description of the problem, it sounds as if you may have encrypted the entire disk instead of just the C: volume or the BIOS ROM file is corrupt.
You should be able to get past the HP screen to enter the BIOS.
The BIOS should give complain that it cannot find a drive with a bootable OS.
If that does happen, and you have the recovery disk set or usb recovery media, life is good and you will need to take a look at the Symantek forum to see how to proceed with your encrypted disk.
If it does not then, the problem lies with the BIOS on the system board.
Pressing the Esc key and having the startup menu appear is conditional on the BIOS being in good condition. Yours may be corrupt. Try downloading a BIOS softpaq on another PC, extracting the BIOS ROM file and putting it on the root of a usb thumbdrive. Put the thumbdrive in a USB port in the notebook. Press the power button and immediately hold down the Windows key and begin tapping the B key. If this works and you see an led flash, release the keys and wait. the process should load a clean BIOS file to replace the corrupted one. This takes time, so be patient if you see a flashing led or no reaction from the notebook for a couple of minutes.
Post your results here and we can move on to the next steps you can take.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Mac Pro 2008 won't boot from install disc - black screen

Hello,
I recently purchased a new hard drive to replace the original that came with my Mac Pro 2008. I was able to format the new drive using Disk Utility. I am now at the point where I need to install OS X onto the new drive, but the computer refuses to boot from the disc. The disc is recognized by the computer (I can access the disc and am able to use the BootCamp applications, etc.) but I just get a black screen when trying to boot directly from the disc. The computer boots fine otherwise.
I have tried the following:
I have tried using both the gray install disc that came with the computer and the Snow Leopard Install DVD disc.
I have tried booting using the "C" key and the "option" key but still receive a black screen following the chime (I've held these down for several minutes).
I have tried restarting from either install disc using the Bootcamp Assistant.
I have tried running the installation software to get it to restart from the disc.
I have tried a combination of the drives, i.e. trying to boot from the discs with just the new drive installed, just the original drive installed, and with both in bay1 and 2.
Everything results in the computer starting up, hearing the chime, and then nothing..just black screen. I have the original drive partitioned with BootCamp with OSX Snow Leopard and Windows 7 installed (I don't know that that matters).
I am at a loss as to what to try next. It doesn't seem like the superdrive because it is recognizing the disc, it just won't boot from it.
Any help is appreciated, thank you.

Clone should be a must and easy to do and learn (learn by doing! 2)
6800 would 'qualify' as 5x70 series flashed etc and same rule: 10.6.5
In the past there was 10.4.6, 10.5.6, but not 10.6.6 - even though strong need for such a DVD.
10.6.8 DVD would be excellent
Lion or ML - buy, download, make an installer flash card would be what I would do at this point.
Then keep both - dual boot as you learn and test and see what ML does and waht you had that required Rosetta to support PowerPC. See www.roaringapps.com about that.
With Carbon Coyp Cloner - was share, now commercial, great utility been around since 10.2.2 at least - this time 2003. 10 yrs.
You can clone the system folders, you can even selectively choose. You can skip copy of most of your home account and do that separately to another drive if you want.
Clone Windows with Paragon or WinClone and use Windows 7 or 8 DVD to do a system repair (automatic) or to edit the BCD file. It can and should - and all you do is boot Windows 7 DVD w/ only the one drive present and go at it. Piece of cake. But yes, Windows gets fussy if you change or remove or move. BCD to the rescue. A proper program for cloning like Paragon's "Clone OS" meant for going from disk drives to SSDs, knows that and how to do it.
Back to how to clone etc:
Clone
Disk utility has RESTORE which will also clone your system but not the Lion Recovery partition. Oddly Apple did not 'endorse' making bootable clone of the system which works too but most choose Carbon Copy Cloner - it works more consistently; it allows for smart update of the backup volume. Both can backup to a sparse disk image if desired.
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
Create an OS X Lion Install disc
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
The DVD is dependent on your hardware. And your hardware changed. The drivers for the 5780 and 6xxx are bundled in the OS and lacking. Minimum build thing.
Put the new drive anywhere you want. Does not matter. Can move it later. Can be drive bay 0-3 or a Firewire external or under the DVD drive.
When you clone pull the old drive and boot from the newly cloned.
After that keep a backup clone around all the time. Takes less than 10 minutes to do a smart update to copy just the changes to keep it current. So you have working copy of the system. I keep Clone "A" that I keep "as was" the system as of last month or whatever (like 10.7.4 before upgrade to 7.5).
Comes easier after doing it once and have all your ducks in a row.

Update kernel to 3.17 - Black screen under booting

Hi,
I update kernel from 3.16 to 3.17, and when I start booting, see log an after a certain time I get black screen.
I have notebook Asus X200M with intel graphic card.
Booting log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014
[ 0.000000] Command line: initrd=\EFI\archiso\archiso.img archisobasedir=arch archisolabel=ARCH_201409
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000b8d36fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b8d37000-0x00000000b8d66fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b8d67000-0x00000000b8eb6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b8eb7000-0x00000000b93b9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b93ba000-0x00000000b9bacfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b9bad000-0x00000000b9badfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9bae000-0x00000000b9beffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b9bf0000-0x00000000b9d65fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9d66000-0x00000000b9ff9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b9ffa000-0x00000000b9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xa9461018-0xa9471057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000020100000-0x00000000a9461017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a9461018-0x00000000a9471057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a9471058-0x00000000b8d36fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b8d37000-0x00000000b8d66fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000b8d67000-0x00000000b8eb6fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b8eb7000-0x00000000b93b9fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000b93ba000-0x00000000b9bacfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000b9bad000-0x00000000b9badfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b9bae000-0x00000000b9beffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000b9bf0000-0x00000000b9d65fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b9d66000-0x00000000b9ff9fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000b9ffa000-0x00000000b9ffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xb93a4000 ACPI 2.0=0xb93a4000 SMBIOS=0xb9a96e18
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000008f000) (0MB)
[ 0.000000] efi: mem03: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem05: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f47000) (15MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001f47000-0x0000000020000000) (480MB)
[ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020100000-0x000000007ec2e000) (1515MB)
[ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007ec2e000-0x0000000080000000) (19MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x000000009a000000) (416MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x000000009a000000-0x000000009a020000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x000000009a020000-0x00000000a9461000) (244MB)
[ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x00000000a9461000-0x00000000a9472000) (0MB)
[ 0.000000] efi: mem16: type=1, attr=0xf, range=[0x00000000a9472000-0x00000000aa3b9000) (15MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x00000000aa3b9000-0x00000000aa3bc000) (0MB)
[ 0.000000] efi: mem18: type=1, attr=0xf, range=[0x00000000aa3bc000-0x00000000aa3d3000) (0MB)
[ 0.000000] efi: mem19: type=2, attr=0xf, range=[0x00000000aa3d3000-0x00000000aa3d5000) (0MB)
[ 0.000000] efi: mem20: type=1, attr=0xf, range=[0x00000000aa3d5000-0x00000000aa3f0000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000aa3f0000-0x00000000b8737000) (227MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000b8737000-0x00000000b8af2000) (3MB)
[ 0.000000] efi: mem23: type=3, attr=0xf, range=[0x00000000b8af2000-0x00000000b8d37000) (2MB)
[ 0.000000] efi: mem24: type=0, attr=0xf, range=[0x00000000b8d37000-0x00000000b8d67000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000b8d67000-0x00000000b8eb7000) (1MB)
[ 0.000000] efi: mem26: type=10, attr=0xf, range=[0x00000000b8eb7000-0x00000000b93ba000) (5MB)
[ 0.000000] efi: mem27: type=6, attr=0x800000000000000f, range=[0x00000000b93ba000-0x00000000b9b4c000) (7MB)
[ 0.000000] efi: mem28: type=5, attr=0x800000000000000f, range=[0x00000000b9b4c000-0x00000000b9bad000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000b9bad000-0x00000000b9bae000) (0MB)
[ 0.000000] efi: mem30: type=6, attr=0x800000000000000f, range=[0x00000000b9bae000-0x00000000b9bf0000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000b9bf0000-0x00000000b9d66000) (1MB)
[ 0.000000] efi: mem32: type=6, attr=0x800000000000000f, range=[0x00000000b9d66000-0x00000000b9ffa000) (2MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x00000000b9ffa000-0x00000000ba000000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x0000000100000000-0x0000000140000000) (1024MB)
[ 0.000000] efi: mem35: type=11, attr=0x8000000000000000, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
[ 0.000000] efi: mem36: type=11, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
[ 0.000000] efi: mem37: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. X200MA/X200MA, BIOS X200MA.404 04/04/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BA000000 mask FFE000000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 100000000 mask FC0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xba000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20100000-0xb8d36fff]
[ 0.000000] [mem 0x20100000-0x201fffff] page 4k
[ 0.000000] [mem 0x20200000-0xb8bfffff] page 2M
[ 0.000000] [mem 0xb8c00000-0xb8d36fff] page 4k
[ 0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
[ 0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xb8d67000-0xb8eb6fff]
[ 0.000000] [mem 0xb8d67000-0xb8eb6fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb9bad000-0xb9badfff]
[ 0.000000] [mem 0xb9bad000-0xb9badfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb9bf0000-0xb9d65fff]
[ 0.000000] [mem 0xb9bf0000-0xb9d65fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb9ffa000-0xb9ffffff]
[ 0.000000] [mem 0xb9ffa000-0xb9ffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x7ec2e000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000B93A4000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000B93A4080 00008C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000B93B5EE0 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20140424/tbfadt-618)
[ 0.000000] ACPI: DSDT 0x00000000B93A41A0 011D3A (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000B93B9F80 000040
[ 0.000000] ACPI: APIC 0x00000000B93B5FF0 000084 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000B93B6078 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000B93B60C0 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: LPIT 0x00000000B93B6100 000104 (v01 _ASUS_ Notebook 00000003 VLV2 0100000D)
[ 0.000000] ACPI: ECDT 0x00000000B93B6208 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: HPET 0x00000000B93B62D0 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000B93B6308 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000B93B6A70 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000B93B6D00 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x00000000B93B6E80 000042 (v01 _ASUS_ Notebook 00000000 00000000)
[ 0.000000] ACPI: BGRT 0x00000000B93B6EC8 000038 (v00 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: MSDM 0x00000000B8D64F98 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fff5000-0x13fff9fff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008efff]
[ 0.000000] node 0: [mem 0x00090000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20100000-0xb8d36fff]
[ 0.000000] node 0: [mem 0xb8d67000-0xb8eb6fff]
[ 0.000000] node 0: [mem 0xb9bad000-0xb9badfff]
[ 0.000000] node 0: [mem 0xb9bf0000-0xb9d65fff]
[ 0.000000] node 0: [mem 0xb9ffa000-0xb9ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1019552
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11773 pages used for memmap
[ 0.000000] DMA32 zone: 753412 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics stolen memory at 0xbb000000-0xbeffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] res edge lint[0x51])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] res res lint[0xaa])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0xa3])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x70])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 103
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa9461000-0xa9461fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa9471000-0xa9471fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb8d37000-0xb8d66fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb8eb7000-0xb93b9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb93ba000-0xb9bacfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9bae000-0xb9beffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9d66000-0xb9ff9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xe00f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xbf000000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s86784 r8192 d23808 u524288
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003598
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\EFI\archiso\archiso.img archisobasedir=arch archisolabel=ARCH_201409
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3677272K/4078208K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 400936K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Maximum core-clock to bus-clock ratio: 0x1a
[ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[ 0.000000] TSC runs at 2163200 KHz
[ 0.000000] lapic_timer_frequency = 277333
[ 0.000000] tsc: Detected 2163.200 MHz processor
[ 0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4328.66 BogoMIPS (lpj=7210666)
[ 0.000044] pid_max: default: 32768 minimum: 301
[ 0.000061] ACPI: Core revision 20140424
[ 0.029799] ACPI: All ACPI Tables successfully acquired
[ 0.031844] Security Framework initialized
[ 0.031853] Yama: becoming mindful.
[ 0.032325] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.034100] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.034885] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.034901] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.035292] Initializing cgroup subsys memory
[ 0.035333] Initializing cgroup subsys devices
[ 0.035346] Initializing cgroup subsys freezer
[ 0.035352] Initializing cgroup subsys net_cls
[ 0.035360] Initializing cgroup subsys blkio
[ 0.035395] CPU: Physical Processor ID: 0
[ 0.035398] CPU: Processor Core ID: 0
[ 0.035404] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.040179] mce: CPU supports 6 MCE banks
[ 0.040190] CPU0: Thermal monitoring enabled (TM1)
[ 0.040199] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
tlb_flushall_shift: 6
[ 0.040321] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[ 0.054319] ftrace: allocating 20434 entries in 80 pages
[ 0.065409] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.098392] smpboot: CPU0: Intel(R) Pentium(R) CPU N3520 @ 2.16GHz (fam: 06, model: 37, stepping: 03)
[ 0.098419] TSC deadline timer enabled
[ 0.098452] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.098468] ... version: 3
[ 0.098470] ... bit width: 40
[ 0.098472] ... generic registers: 2
[ 0.098474] ... value mask: 000000ffffffffff
[ 0.098476] ... max period: 000000ffffffffff
[ 0.098478] ... fixed-purpose events: 3
[ 0.098480] ... event mask: 0000000700000003
[ 0.121896] x86: Booting SMP configuration:
[ 0.121902] .... node #0, CPUs: #1
[ 0.139857] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.143193] #2 #3
[ 0.182296] x86: Booted up 1 node, 4 CPUs
[ 0.182302] smpboot: Total of 4 processors activated (17312.66 BogoMIPS)
[ 0.183192] devtmpfs: initialized
[ 0.189816] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.189820] PM: Registering ACPI NVS region [mem 0xb8eb7000-0xb93b9fff] (5255168 bytes)
[ 0.191745] pinctrl core: initialized pinctrl subsystem
[ 0.191811] RTC time: 20:42:53, date: 10/31/14
[ 0.191901] NET: Registered protocol family 16
[ 0.192122] cpuidle: using governor ladder
[ 0.192127] cpuidle: using governor menu
[ 0.192195] ACPI: bus type PCI registered
[ 0.192199] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.192351] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.192356] PCI: not using MMCONFIG
[ 0.192358] PCI: Using configuration type 1 for base access
[ 0.209690] ACPI: Added _OSI(Module Device)
[ 0.209695] ACPI: Added _OSI(Processor Device)
[ 0.209697] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.209700] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.213766] ACPI : EC: EC description table is found, configuring boot EC
[ 0.235995] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.261579] ACPI: Dynamic OEM Table Load:
[ 0.261590] ACPI: SSDT 0xFFFF880139648800 00045B (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.262859] ACPI: Dynamic OEM Table Load:
[ 0.262869] ACPI: SSDT 0xFFFF880139649000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.286101] ACPI: Dynamic OEM Table Load:
[ 0.286109] ACPI: SSDT 0xFFFF880139ACB200 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.295812] ACPI: Dynamic OEM Table Load:
[ 0.295821] ACPI: SSDT 0xFFFF8801396240C0 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.310441] ACPI: Interpreter enabled
[ 0.310454] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.310463] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.310489] ACPI: (supports S0 S3 S4 S5)
[ 0.310493] ACPI: Using IOAPIC for interrupt routing
[ 0.310534] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.311446] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.312163] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.321942] ACPI: Power Resource [USBC] (on)
[ 0.330436] ACPI: Power Resource [PLPE] (on)
[ 0.330733] ACPI: Power Resource [PLPE] (on)
[ 0.335104] ACPI: Power Resource [CLK0] (on)
[ 0.335182] ACPI: Power Resource [CLK1] (on)
[ 0.338894] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.338905] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.338985] \_SB_.PCI0:_OSC invalid UUID
[ 0.338989] _OSC request data:1 1f 0
[ 0.338996] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.339862] PCI host bridge to bus 0000:00
[ 0.339868] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.339872] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
[ 0.339876] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
[ 0.339879] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.339883] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.339887] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.339890] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[ 0.339894] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0815ffe]
[ 0.339906] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.340095] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.340112] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
[ 0.340124] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.340136] pci 0000:00:02.0: reg 0x20: [io 0xf080-0xf087]
[ 0.340329] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
[ 0.340352] pci 0000:00:13.0: reg 0x10: [io 0xf070-0xf077]
[ 0.340363] pci 0000:00:13.0: reg 0x14: [io 0xf060-0xf063]
[ 0.340374] pci 0000:00:13.0: reg 0x18: [io 0xf050-0xf057]
[ 0.340384] pci 0000:00:13.0: reg 0x1c: [io 0xf040-0xf043]
[ 0.340395] pci 0000:00:13.0: reg 0x20: [io 0xf020-0xf03f]
[ 0.340405] pci 0000:00:13.0: reg 0x24: [mem 0xd0815000-0xd08157ff]
[ 0.340454] pci 0000:00:13.0: PME# supported from D3hot
[ 0.340613] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.340635] pci 0000:00:14.0: reg 0x10: [mem 0xd0800000-0xd080ffff 64bit]
[ 0.340695] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.340814] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.340900] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.340929] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
[ 0.340944] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
[ 0.341048] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.341212] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[ 0.341238] pci 0000:00:1b.0: reg 0x10: [mem 0xd0810000-0xd0813fff 64bit]
[ 0.341311] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.341467] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[ 0.341532] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.341633] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.341704] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[ 0.341768] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.341865] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.341939] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[ 0.342003] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.342100] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.342181] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.342411] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[ 0.342448] pci 0000:00:1f.3: reg 0x10: [mem 0xd0814000-0xd081401f]
[ 0.342521] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.342839] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.342968] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[ 0.342996] pci 0000:02:00.0: reg 0x10: [mem 0xd0700000-0xd077ffff 64bit]
[ 0.343047] pci 0000:02:00.0: reg 0x30: [mem 0xd0780000-0xd078ffff pref]
[ 0.343115] pci 0000:02:00.0: supports D1 D2
[ 0.343119] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.343175] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.349069] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.349077] pci 0000:00:1c.1: bridge window [mem 0xd0700000-0xd07fffff]
[ 0.349202] pci 0000:03:00.0: [10ec:5286] type 00 class 0xff0000
[ 0.349225] pci 0000:03:00.0: reg 0x10: [mem 0xd0600000-0xd060ffff]
[ 0.349361] pci 0000:03:00.0: supports D1 D2
[ 0.349365] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.349427] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.349509] pci 0000:03:00.2: [10ec:8136] type 00 class 0x020000
[ 0.349532] pci 0000:03:00.2: reg 0x10: [io 0xe000-0xe0ff]
[ 0.349561] pci 0000:03:00.2: reg 0x18: [mem 0xd0614000-0xd0614fff 64bit]
[ 0.349580] pci 0000:03:00.2: reg 0x20: [mem 0xd0610000-0xd0613fff 64bit pref]
[ 0.349661] pci 0000:03:00.2: supports D1 D2
[ 0.349665] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.355738] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.355744] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.355750] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff]
[ 0.356698] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.356818] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.356935] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.357050] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.357165] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.357280] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.357396] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.357512] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.359318] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.359471] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.359689] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.359696] vgaarb: loaded
[ 0.359698] vgaarb: bridge control possible 0000:00:02.0
[ 0.359824] PCI: Using ACPI for IRQ routing
[ 0.365679] PCI: pci_cache_line_size set to 64 bytes
[ 0.365734] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.365738] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.365740] e820: reserve RAM buffer [mem 0xa9461018-0xabffffff]
[ 0.365743] e820: reserve RAM buffer [mem 0xb8d37000-0xbbffffff]
[ 0.365746] e820: reserve RAM buffer [mem 0xb8eb7000-0xbbffffff]
[ 0.365749] e820: reserve RAM buffer [mem 0xb9bae000-0xbbffffff]
[ 0.365752] e820: reserve RAM buffer [mem 0xb9d66000-0xbbffffff]
[ 0.365755] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
[ 0.365940] NetLabel: Initializing
[ 0.365943] NetLabel: domain hash size = 128
[ 0.365945] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.365968] NetLabel: unlabeled traffic allowed by default
[ 0.366034] Switched to clocksource refined-jiffies
[ 0.374184] pnp: PnP ACPI init
[ 0.374218] ACPI: bus type PNP registered
[ 0.374302] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.374554] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.374560] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.374564] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.374568] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.374573] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.374688] system 00:02: [io 0x03f8-0x0411] could not be reserved
[ 0.374694] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.374837] pnp 00:03: Plug and Play ACPI device, IDs FLT0102 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.374933] pnp 00:04: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.375354] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.375359] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.375364] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.375368] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved
[ 0.375372] system 00:05: [mem 0xfed0c000-0xfed0ffff] has been reserved
[ 0.375376] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.375380] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.375384] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.375388] system 00:05: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.375394] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.376886] pnp: PnP ACPI: found 6 devices
[ 0.376889] ACPI: bus type PNP unregistered
[ 0.385464] Switched to clocksource acpi_pm
[ 0.385504] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.385518] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.385524] pci 0000:00:1c.1: bridge window [mem 0xd0700000-0xd07fffff]
[ 0.385533] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.385537] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.385543] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff]
[ 0.385552] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
[ 0.385556] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
[ 0.385559] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
[ 0.385563] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.385566] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ 0.385570] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[ 0.385574] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xd0815ffe]
[ 0.385578] pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd07fffff]
[ 0.385582] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.385585] pci_bus 0000:03: resource 1 [mem 0xd0600000-0xd06fffff]
[ 0.385634] NET: Registered protocol family 2
[ 0.386034] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.386172] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.386319] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.386368] TCP: reno registered
[ 0.386384] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.386423] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.386554] NET: Registered protocol family 1
[ 0.386582] pci 0000:00:02.0: Boot video device
[ 0.386878] PCI: CLS 64 bytes, default 64
[ 0.386971] Unpacking initramfs...
[ 3.798196] Freeing initrd memory: 20296K (ffff88007ec2e000 - ffff880080000000)
[ 3.798214] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.798219] software IO TLB [mem 0xa5461000-0xa9461000] (64MB) mapped at [ffff8800a5461000-ffff8800a9460fff]
[ 3.798657] Scanning for low memory corruption every 60 seconds
[ 3.799231] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 3.799830] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.802497] zbud: loaded
[ 3.802768] VFS: Disk quotas dquot_6.5.2
[ 3.802834] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.803065] msgmni has been set to 7684
[ 3.803159] Key type big_key registered
[ 3.803575] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 3.803705] io scheduler noop registered
[ 3.803711] io scheduler deadline registered
[ 3.803804] io scheduler cfq registered (default)
[ 3.804386] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.804416] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.804493] efifb: probing for efifb
[ 3.804515] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 1876k, total 1875k
[ 3.804518] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 3.804520] efifb: scrolling: redraw
[ 3.804523] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.807600] Console: switching to colour frame buffer device 100x37
[ 3.810507] fb0: EFI VGA frame buffer device
[ 3.810524] intel_idle: MWAIT substates: 0x33000020
[ 3.810527] intel_idle: v0.4 model 0x37
[ 3.810529] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.810913] GHES: HEST is not enabled!
[ 3.811063] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.831365] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.832332] hpet: number irqs doesn't agree with number of timers
[ 3.832373] Linux agpgart interface v0.103
[ 3.832472] rtc_cmos 00:00: RTC can wake from S4
[ 3.832710] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 3.832742] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[ 3.832763] Intel P-state driver initializing.
[ 3.832782] Intel pstate controlling: cpu 0
[ 3.832876] Intel pstate controlling: cpu 1
[ 3.832970] Intel pstate controlling: cpu 2
[ 3.833076] Intel pstate controlling: cpu 3
[ 3.833279] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.833991] TCP: cubic registered
[ 3.834789] NET: Registered protocol family 10
[ 3.835678] NET: Registered protocol family 17
[ 3.837271] registered taskstats version 1
[ 3.839828] Magic number: 2:163:752
[ 3.839841] tty ttyS3: hash matches
[ 3.840028] rtc_cmos 00:00: setting system clock to 2014-10-31 20:42:56 UTC (1414788176)
[ 3.840203] PM: Hibernation image not present or could not be loaded.
[ 3.842178] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[ 3.842183] Write protecting the kernel read-only data: 8192k
[ 3.846670] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
[ 3.848729] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[ 3.865722] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 3.868883] systemd-udevd[58]: starting version 216
[ 3.887455] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.887463] ACPI: Power Button [PWRB]
[ 3.887570] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 3.888627] ACPI: Lid Switch [LID]
[ 3.888729] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 3.888734] ACPI: Sleep Button [SLPB]
[ 3.888823] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.888827] ACPI: Power Button [PWRF]
[ 3.892296] sdhci: Secure Digital Host Controller Interface driver
[ 3.892301] sdhci: Copyright(c) Pierre Ossman
[ 3.902568] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 3.905559] i8042: Detected active multiplexing controller, rev 1.1
[ 3.906663] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.906689] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.906694] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.906698] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.906701] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.914328] wmi: Mapper loaded
[ 3.918784] ACPI: bus type USB registered
[ 3.918835] usbcore: registered new interface driver usbfs
[ 3.918867] usbcore: registered new interface driver hub
[ 3.918875] rtsx_pci 0000:03:00.0: irq 103 for MSI/MSI-X
[ 3.918901] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 103
[ 3.918953] usbcore: registered new device driver usb
[ 3.919389] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.919409] r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control
[ 3.919726] r8169 0000:03:00.2: irq 104 for MSI/MSI-X
[ 3.920037] r8169 0000:03:00.2 eth0: RTL8402 at 0xffffc9000064c000, 10:c3:7b:66:32:b5, XID 04000800 IRQ 104
[ 3.920547] SCSI subsystem initialized
[ 3.921052] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.921071] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 3.921487] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.921518] xhci_hcd 0000:00:14.0: irq 105 for MSI/MSI-X
[ 3.921976] hub 1-0:1.0: USB hub found
[ 3.921995] hub 1-0:1.0: 6 ports detected
[ 3.923415] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.923425] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 3.923770] hub 2-0:1.0: USB hub found
[ 3.923785] hub 2-0:1.0: 1 port detected
[ 3.925827] libata version 3.00 loaded.
[ 3.927536] ahci 0000:00:13.0: version 3.0
[ 3.927753] ahci 0000:00:13.0: irq 106 for MSI/MSI-X
[ 3.927966] [drm] Initialized drm 1.1.0 20060810
[ 3.938420] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 3.938428] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm apst
[ 3.939052] scsi0 : ahci
[ 3.939333] scsi1 : ahci
[ 3.939427] ata1: SATA max UDMA/133 abar m2048@0xd0815000 port 0xd0815100 irq 106
[ 3.939430] ata2: DUMMY
[ 3.940211] [drm] Memory usable by graphics device = 2048M
[ 3.940216] [drm] Replacing VGA console driver
[ 3.940221] checking generic (c0000000 1d5000) vs hw (c0000000 10000000)
[ 3.940224] fb: switching to inteldrmfb from EFI VGA
[ 3.940252] Console: switching to colour dummy device 80x25
[ 3.945163] i915 0000:00:02.0: irq 107 for MSI/MSI-X
[ 3.945177] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.945180] [drm] Driver supports precise vblank timestamp query.
[ 3.986231] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 4.178812] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.265360] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.282149] ata1.00: ATA-8: KINGSTON SV300S37A120G, 525ABBF0, max UDMA/133
[ 4.282170] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 4.282186] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.301865] ata1.00: configured for UDMA/133
[ 4.302143] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[ 4.305528] [drm] VBT doesn't support DRRS
[ 4.313905] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 4.314705] sd 0:0:0:0: [sda] Write Protect is off
[ 4.314710] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.314769] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.318558] sda: sda1 sda2 sda3 sda4 sda5
[ 4.319762] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.352944] fbcon: inteldrmfb (fb0) is primary device
[ 4.656003] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 4.802506] tsc: Refined TSC clocksource calibration: 2166.666 MHz
[ 4.833949] hub 1-4:1.0: USB hub found
[ 4.834515] hub 1-4:1.0: 3 ports detected
[ 4.836858] usb: failed to peer 1-4-port1 and usb2-port1 by location (1-4-port1:none) (usb2-port1:usb1-port1)
[ 4.836867] usb 1-4-port1: failed to peer to usb2-port1 (-16)
[ 4.836870] usb: port power management may be unreliable
[ 4.838038] usb: failed to peer 1-4-port2 and usb2-port1 by location (1-4-port2:none) (usb2-port1:usb1-port1)
[ 4.838047] usb 1-4-port2: failed to peer to usb2-port1 (-16)
[ 4.839283] usb: failed to peer 1-4-port3 and usb2-port1 by location (1-4-port3:none) (usb2-port1:usb1-port1)
[ 4.839292] usb 1-4-port3: failed to peer to usb2-port1 (-16)
[ 5.106630] usb 1-4.1: new full-speed USB device number 4 using xhci_hcd
[ 5.260234] usb 1-4.2: new high-speed USB device number 5 using xhci_hcd
[ 5.352708] usb-storage 1-4.2:1.0: USB Mass Storage device detected
[ 5.354630] scsi2 : usb-storage 1-4.2:1.0
[ 5.355157] usbcore: registered new interface driver usb-storage
[ 5.358066] usbcore: registered new interface driver uas
[ 5.804227] Switched to clocksource tsc
[ 5.996975] Console: switching to colour frame buffer device 170x48
[ 6.023343] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.023358] i915 0000:00:02.0: registered panic notifier
[ 6.092491] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.127628] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 6.127865] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.347180] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 6.358480] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Blade 8.02 PQ: 0 ANSI: 0 CCS
[ 6.360601] sd 2:0:0:0: [sdb] 7856127 512-byte logical blocks: (4.02 GB/3.74 GiB)
[ 6.361027] sd 2:0:0:0: [sdb] Write Protect is off
[ 6.361050] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 6.361491] sd 2:0:0:0: [sdb] No Caching mode page found
[ 6.361741] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 6.370486] sdb: sdb1 sdb2
[ 6.374072] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 6.585273] ISO 9660 Extensions: RRIP_1991A
[ 6.604648] loop: module loaded
[ 6.669200] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 6.699504] device-mapper: uevent: version 1.0.3
[ 6.699820] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
[ 6.761101] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
[ 7.249501] efivars: duplicate variable: AcpiGlobalVariable-c020489e-6db2-4ef2-9aa5-ca06fc11d36a
[ 7.261555] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[ 7.262617] systemd[1]: Detected architecture 'x86-64'.
[ 7.301337] systemd[1]: Set hostname to <archiso>.
[ 7.301524] systemd[1]: Initializing machine ID from random generator.
[ 7.625350] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.625510] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.625540] systemd[1]: Starting Remote File Systems.
[ 7.625765] systemd[1]: Reached target Remote File Systems.
[ 7.625796] systemd[1]: Starting Encrypted Volumes.
[ 7.625970] systemd[1]: Reached target Encrypted Volumes.
[ 7.626024] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.626109] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.626135] systemd[1]: Starting Paths.
[ 7.626295] systemd[1]: Reached target Paths.
[ 7.626380] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.626764] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.626798] systemd[1]: Starting Swap.
[ 7.626957] systemd[1]: Reached target Swap.
[ 7.626985] systemd[1]: Starting Root Slice.
[ 7.647934] systemd[1]: Created slice Root Slice.
[ 7.647965] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.648331] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.648355] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.648535] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.648558] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 7.648749] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.648771] systemd[1]: Starting Journal Socket (/dev/log).
[ 7.648960] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.648983] systemd[1]: Starting LVM2 metadata daemon socket.
[ 7.649165] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.649199] systemd[1]: Starting udev Kernel Socket.
[ 7.649365] systemd[1]: Listening on udev Kernel Socket.
[ 7.649397] systemd[1]: Starting udev Control Socket.
[ 7.649567] systemd[1]: Listening on udev Control Socket.
[ 7.649590] systemd[1]: Starting User and Session Slice.
[ 7.650145] systemd[1]: Created slice User and Session Slice.
[ 7.650179] systemd[1]: Starting Journal Socket.
[ 7.650370] systemd[1]: Listening on Journal Socket.
[ 7.650417] systemd[1]: Starting System Slice.
[ 7.650925] systemd[1]: Created slice System Slice.
[ 7.662478] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.662529] systemd[1]: Mounting Huge Pages File System...
[ 7.663922] systemd[1]: Starting Load Kernel Modules...
[ 7.665094] systemd[1]: Starting udev Coldplug all Devices...
[ 7.666141] systemd[1]: Starting Setup Virtual Console...
[ 7.667202] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.738374] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.740716] systemd[1]: Mounting Debug File System...
[ 7.742925] systemd[1]: Starting system-getty.slice.
[ 7.744791] systemd[1]: Created slice system-getty.slice.
[ 7.744825] systemd[1]: Starting Journal Service...
[ 7.748641] systemd[1]: Started Journal Service.
[ 8.073656] random: nonblocking pool is initialized
[ 8.186980] FS-Cache: Loaded
[ 8.258509] RPC: Registered named UNIX socket transport module.
[ 8.258516] RPC: Registered udp transport module.
[ 8.258546] RPC: Registered tcp transport module.
[ 8.258551] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.451188] FS-Cache: Netfs 'nfs' registered for caching
[ 8.753221] systemd-journald[175]: Received request to flush runtime journal from PID 1
[ 9.115001] systemd-udevd[213]: starting version 216
[ 9.796902] ACPI: AC Adapter [AC0] (on-line)
[ 9.883837] hidraw: raw HID events driver (C) Jiri Kosina
[ 9.889691] ACPI: Battery Slot [BAT0] (battery present)
[ 9.891267] thermal LNXTHERM:00: registered as thermal_zone0
[ 9.891268] ACPI: Thermal Zone [THRM] (0 C)
[ 9.963438] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 9.963449] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.964519] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A
[ 9.964525] mei_txe 0000:00:1a.0: PCI INT A: no GSI
[ 9.964590] mei_txe 0000:00:1a.0: irq 108 for MSI/MSI-X
[ 10.141120] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 10.174886] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.200306] systemd-udevd[228]: renamed network interface eth0 to enp3s0f2
[ 10.241618] media: Linux media interface: v0.10
[ 10.242057] microcode: CPU0 sig=0x30673, pf=0x8, revision=0x320
[ 10.332225] systemd-journald[175]: Received request to flush runtime journal from PID 1
[ 10.340831] Linux video capture interface: v2.00
[ 10.356019] iTCO_vendor_support: vendor-support=0
[ 10.405092] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.405174] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[ 10.405434] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.422683] microcode: CPU1 sig=0x30673, pf=0x8, revision=0x320
[ 10.422740] microcode: CPU2 sig=0x30673, pf=0x8, revision=0x320
[ 10.422840] microcode: CPU3 sig=0x30673, pf=0x8, revision=0x320
[ 10.422970] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 10.429277] Bluetooth: Core ver 2.19
[ 10.429308] NET: Registered protocol family 31
[ 10.429311] Bluetooth: HCI device and connection manager initialized
[ 10.429322] Bluetooth: HCI socket layer initialized
[ 10.429326] Bluetooth: L2CAP socket layer initialized
[ 10.429339] Bluetooth: SCO socket layer initialized
[ 10.545328] asus_wmi: ASUS WMI generic driver loaded
[ 10.555713] usbcore: registered new interface driver btusb
[ 10.568780] asus_wmi: Initialization: 0x1
[ 10.568880] asus_wmi: BIOS WMI version: 7.9
[ 10.568996] asus_wmi: SFUN value: 0x4a0877
[ 10.571556] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input15
[ 10.607024] asus_wmi: Backlight controlled by ACPI video driver
[ 10.619927] cfg80211: Calling CRDA to update world regulatory domain
[ 10.620046] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b424)
[ 10.621588] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input16
[ 10.621725] usbcore: registered new interface driver uvcvideo
[ 10.621728] USB Video Class driver (1.1.1)
[ 10.623479] snd_hda_intel 0000:00:1b.0: irq 109 for MSI/MSI-X
[ 10.829115] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.829123] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.829126] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 10.829129] sound hdaudioC0D0: mono: mono_out=0x0
[ 10.829132] sound hdaudioC0D0: inputs:
[ 10.829136] sound hdaudioC0D0: Mic=0x1b
[ 10.912319] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 10.912449] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 10.929663] intel_soc_dts_thermal: request_threaded_irq ret -22
[ 10.938823] ath: phy0: WB335 2-ANT card detected
[ 10.938829] ath: phy0: Set BT/WLAN RX diversity capability
[ 10.947885] cfg80211: World regulatory domain updated:
[ 10.947892] cfg80211: DFS Master region: unset
[ 10.947894] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.947898] cfg80211: (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
[ 10.947901] cfg80211: (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
[ 10.947904] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.947907] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.947910] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.947913] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.947915] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.947918] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 10.948016] ath: phy0: Enable LNA combining
[ 10.949134] ath: phy0: ASPM enabled: 0x42
[ 10.949138] ath: EEPROM regdomain: 0x60
[ 10.949139] ath: EEPROM indicates we should expect a direct regpair map
[ 10.949143] ath: Country alpha2 being used: 00
[ 10.949145] ath: Regpair used: 0x60
[ 10.949212] intel_rapl: RAPL domain uncore detection failed
[ 10.949220] intel_rapl: RAPL domain dram detection failed
[ 11.012452] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.012826] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90022480000, irq=17
[ 11.038314] systemd-udevd[216]: renamed network interface wlan0 to wlp2s0
[ 12.184211] r8169 0000:03:00.2 enp3s0f2: link down
[ 12.184241] r8169 0000:03:00.2 enp3s0f2: link down
[ 12.184263] IPv6: ADDRCONF(NETDEV_UP): enp3s0f2: link is not ready
[ 13.309766] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input14
[ 13.313404] mousedev: PS/2 mouse device common for all mice
[ 13.775732] r8169 0000:03:00.2 enp3s0f2: link up
[ 13.775767] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f2: link becomes ready
[ 173.542337] EXT4-fs (sda5): recovery complete
[ 173.545042] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
It seems that after this line screen turn off:
fb: switching to inteldrmfb from EFI VGA
Last edited by peer (2014-10-31 20:50:24)

Potomac wrote:
check these bugreports :
https://bugs.archlinux.org/task/42505
https://bugs.archlinux.org/task/42353
it seems that this bug related to i915 chip ( or intel graphic card ) is fixed in kernel 3.18rc3 mainline ( we can find this kernel package in AUR )
there is also another and complete different bug when we use a kernel 3.17 and even 3.18 ( it's a random bug ) but with a similar effect : boot can hang ( the boot process suddenly stops ) :
https://bbs.archlinux.org/viewtopic.php?id=189622
https://bbs.archlinux.org/viewtopic.php?id=189324
downgrading to kernel 3.16.x is the workaround
I assume my computer is affected by one of these bugs. While I can get to the point where my window manager is loaded, everything almost immediately hangs (but doesn't freeze). Terminal windows become non-responsive and Chromium will refuse input. It's very weird. This happens with both of the 3.17 kernel updates but not in any of the 3.16 releases (including 3.16.7).
This is on an AMD system (cpu/gpu w/ open source driver). Overall 3.17 seems rather buggy.

Boot Camp: Black Screen when installing Windows 7

Hey guys, I have an intel 27' iMac. 4 days ago I removed windows 7 because there was an issue with the system (it didn't let me run Maya), so I attempted to install windows 7 again, but the problem was that my internal disk drive doesn't work. (Tried multiple ways of fixing it) Then I bought an external disk drive, hoping that this would fix everything, I was able to partition my windows 7, but when the mac restarts for the first time I'm introduced by a black screen with a small blinking dash top-left of the screen. So I found a fix for it, I got a USB renamed it to MBRFAT or MRBFAT don't remember exactly (I'm on a different computer) and did everything the internet told me to do. To my surprise, it made the blinking dash disappear, but I was introduced with yet another error. Bootmgr is missing, these 4 days were filled with complete bad luck. Please help me out here.
Too long; didn't read version: When the iMac restarts for the first time, a black screen appears with a Bootmgr error, telling me to press any key, although I keep pressing it on my USB mac keyboard nothing happens.

Help

Windows not loading properly in boot camp, black screen

Hi guys,
having problems with bootcamp, running the latest version under snow leopard on an intel mac mini
i bought a copy of XP on ebay, to my dismay, what i actually got in the post was a recovery disk for a dell laptop, and a product key. Although probably illegal to sell to me, it was able to install over the top of my windows 2000 install i did with Parallels. installing to bootcamp as the disk drive is named with a different letter each time i start the virtual machine, causing havoc with games that require the cd to be in the drive, and not knowing where to look for the disc.
I partitioned the drive, and installed windows. once that had finished, it rebooted automatically. but now, whenever i boot up windows under botcamp, i am presented with a black screen with a flashing cursor. i cannot type anything, or bypass it. if the xp disk is in the drive, it says press any key to boot windows from the cd, but pressing any key does not result in anything happening, and so i have to hold the power button down to do an emergency restart.
does anyone know where i might have gone wrong?

solved, by using a windows service pack 2 cd, instead of service pack 3. not sure why the later service pack would not install properly

Lenovo 3000 H series computer boots up to a small blinking blue square on a black screen

Similar Messages

Maybe you are looking for