Lenovo 3000 N100 notebook cannot connect to my wireless network

Hello,
this is my first post. I am new member. I also am a very novice/amateur computer user and so I need some help from some pros or anyone that has experienced a similar problem and can help fix my laptop. I have a Lenovo 3000 N100 laptop model number 0768 6EU. About a week ago I updated/downloaded a bunch of software upgrades from Lenovo's website recommended for this computer. Prior to this download I was able to connect to my wireless home network. But after the download of various required/recommended software upgrades it no longer connects to the wireless home network. my other laptops connect so I know that it is not my wireless router. I have tried various things recommended by the ThinkVantage access connection on my computer but I get the following on that: signal strength: 0%, status: disconnected, IP address: not assigned. I also ran the diagnostic tools and it gave me the following: connection status: disconnected, cause: wireless stack initialization failed, error code: 118, recommended action please check the wireless driver installation. I even went to the Intel wireless 3945 abg hardware properties window and pressed the tab to revert back to the prior driver for the wireless card. I would appreciate any help. I know this message/post is long but it is the only way I can explain what is going on 

Hi
I have this problem also with my Lenovo 3000 V200.
Sometimes when I boot up the PC it will connect to the network and everything works just fine.
At other times, after boot, the "wireless stack initialization failed, error code: 118" problem occurs
and the only way to solve it seems to be a PC restart. Nothing else I do will bring the network up.
If I study the Networking tab in Task Manager it indicates that no adapters are available (wired eth.
access also fails). At a few occations connectivity have failed alltogether (i.e. a reboot have not solved
the problem). Last time this occured I had to reinstall the complete system (from a previous backup)
to get networking up.
I have tried different versions of Access Connections (5.02, 5.12, 5.21) and the same problem occurs
at seemingly random instances in time. This is obviosly a problem with the Access Connections software
since the Wireless networking works fine when I let windows manage it...
Anyone with a fix?
/Fredrik

Similar Messages

  • Cannot connect to the wireless networking

    My Toshiba Laptop was preinstalled with Windows 7 Home premium 64-bit OS, and it had been working quite well with the wireless BB. However, the wireless internet connection was on and off within recent weeks, while the other mobile devices, such as iphone, ipad, or laptop, in my household had no such problem. The wireless signal was so strong, but the error message always said 'Windows cannot connect to the wireless networking'. It seemed there was something wrong with the wireless adapter.
    I got a new TP-Link wireless adapter properly installed. Luckily, this worked; but unluckily, this worked for less than 24 hours. It was really frustrating that I, as a full-time student, depended so much on wireless networking.
    Please help!!! Harry

    Hi there
    You may want to enlighten us with:
    - What model are You using (f.ex. L300-123)
    - What BIOS version is installed?
    - What WLAN driver are You using?
    All these questions are answered in PC Diagnostics found under Toshiba app folder in the start menu.
    BR
    Tom

  • Missing Drivers - Downgraded from Vista Home to Windows XP Pro SP3 - Lenovo 3000 N100 Notebook

    Hey,
    I have a lenovo 3000 N100 as well and recently downgraded to Windows XP Pro Service Pack 3.
    However, I have a lot of hardware drivers missing (yellow question mark) - 
    1) Audio Device on High Definition Audio Bus
    2) Base System Device (listed thrice so I'm guessing there are three separate drivers needed)
    3)Network Controller
    4) Video Controller
    5) Video Controller (VGA Compatible)
    I have no audio or wireless either. Lastly, I have spoken to lenovo and they asked me to download some drivers from lenovo.com. I did and also downloaded every possible driver for XP on the lenovo site but still had no luck.
    I would really appreciate any help/guidance you can offer. I have exausted all resources at this point.
    My email is xxxxxxxxxxxxx so feel free to reach out to me there as well.
    Thanks a ton.
    Kabir
    Note from Moderator:  Please don't post the same message in multiple boards/threads as it splinters the discussion.  Duplicate(s) removed.  Also removed your e-mail address to protect your privacy.
    Message Edited by JaneL on 03-29-2009 09:46 PM

    Hey, I have a lenovo 3000 N100 as well and recently downgraded to Windows XP . However, I have a lot of hardware drivers missing (yellow question mark) - 1) Audio Device on High Definition Audio Bus2) Base System Device (listed thrice so I'm guessing there are three separate drivers needed)3)Network Controller  . I have downloaded some drivers from lenovo.com. I did and also downloaded every possible driver for XP on the lenovo site but still had no luck. I would really appreciate any help/guidance you can offe.. My email is [email protected]
     so feel free to reach out to me there as well. Thanks a ton.
    Deepshikha 

  • MacBook Pro cannot connect to a wireless network

    I am having the following problem with my MacBook Pro trying to connect to a wireless network using a 2WIRE Gateway wireless Router from Bell that worked perfectly until last night. My network preferences pane is saying "AirPort has the self-assigned IP address 169.254.227.XX and will not be able to connect to the Internet." I'm not a techie and I've tried everything I know and cant get my MacBook to connect to the internet using the wireless network in my home. I'm using ethernet connected directly to my router for this! It's killing me. Any help would be greatly appreciated.
    Thanks in advance.

    OK. The wireless network was selected. In the Preferences / Network pane I removed Airport by selecting it and hitting the - button and then created a new Airport by hitting + and selecting Airport. I'm getting the same result. Full network signal once the ethernet cable is connected. Greyed out icon with ! once I remove the ethernet cable and no internet. I appreciate your help so far. Any other thoughts? We also have an iPad, iPhobe, iPod, and two iMacs on the same network. All of them are connected no problem. My Macbook also still connects to the network in my workplace no problem. This all just started happenening yesterday and I don't believe I changed or upgraded anything. I just came home and it had stopped working.

  • Cannot connect 8500a to wireless network

    i input the mac address during wireless network install but cannot connect printer to network

    Do you have MAC filtering enabled?  The printer will not like it plus it is not in the least a security measure.  I recommend disabling MAC filtering and just set the encryption to WPA2 with a strong, 13+ character, passphrase.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Self-assigned IP****cannot connect to university wireless network

    After i installed snow leopard I cannot connect properly to my university network. It says that a self assigned IP and cannot connect to the internet.
    I have tried many things but nothing seems to change this problem
    I need to be able to connect to the internet at school.

    I have the same problem with the Exchange server at my work. Once I loaded Snow Leopard, no access. I can get on my Time Machine at home fine and can even access the open WAP at work, but since Snow Leopard access to the Exchange server is gone. The hype for Snow Leopard says easier access to Exchange services but I can't find any info on what that means anywhere. Anybody find the Exchange info?

  • Cannot connect macbook to wireless network

    Hey, I wonder if someone can help? I live in the uk & want to connect my nephew's macbook to his home wireless network.
    His network is run off a Windows based pc, I have read in the forums that this is ok. He has a rather old pc that has no wireless card so I have installed a Netgear usb adaptor which runs just fine. The pc can "talk" to the Orange Livebox (Livebox -3660) and the pc can connect well, to the internet via the Livebox. So I have a stable internet connection.
    The problem is that we cannot get the macbook ( a few months old only ) to connect at all to the net!
    On the macbook there is no signal reading at all, airport is scanning for a network,it finds Livebox-3660 ok but when we enter the password the macbook says cannot connect!
    Its curious that there is no signal reading at all on the macbook, yet it is right next to the livebox?
    When I take the macbook home to my house, it connects immediately to my imac....full signal no problems. All systems go...
    I must be missing something obvious ?? The security set up is currently WPA-PSK I dont know if this has a relevance? should I change this to make it more compatible to WPA2 ??
    Much appreciate the help of the good people on this forum.
    Thank you in advance. W

    Sorted it!

  • My AirPort has no ip address and I cannot connect to the wireless network. What should I do?

    My wireless network is in the residence at my university so I cannot reset the router or modem.
    I am seemingly the only one with this problem.
    I have tried many things to attempt to make it work, yet they have all been unsuccessful.
    What can I potentially do to try and make this work?

    Well, what else is connected to your airport? Look at the network name it is using.

  • HT4623 Updated iPhone 5 software to iOS 6.0.2 and now cannot connect to my wireless network (TWC).

    Just updated iPhone 5 software to iOS 6.0.2, and now unable to connect to Wireless (TWC).  Anybody know the secret?

    Contact your cellular carrier.  I found this guide to all cellular carrier contacts from Apple:
    http://support.apple.com/kb/HT1937
    ... but I have to say I did not find TWC in there.  I hope you know how to contact them.

  • Lenovo 3000 N100, Services failed to start No internet connection, Win Vista H Prem SP2

    Can not connect to the internet.
    Control Panel>Network and Sharing Center   .. Below  Sharing and Discovery "off "
    Tried to connect wireless first.  Network discovery is off. Clicked to turn on and apply..... it will not turn on?  (still trying )  To end I had to use the task manager, to end program.
    Connected a network cable to the laptop and fill out the wizard connection information.  
           Still will not connect.   Restarted with network cable attached no connection.
    Wireless Connection status, Radio off. Click on "Power on Wireless Radio"  will not come on.
    Also have some spooler issues, currently no printer installed. "The Dependency service or group failed to start."
     Lenovo 3000 N100 Win Vista Home Premium SP2 32bit,  system rating 3.1
    I think this is all a services issue? 
    Suggestions?
    After yet an additional restart "Connection Status: unknown The dependency services or failed to start."

    Called into the Lenovo help desk for software, Rommel did diagnostic with me and it seem to be a virus.  I have no services files running and no internet connection.
    With no internet connection it's hard to get a service from Lenovo.
    They are will to sell me a one time service for 89.00 and if it's considered major it would go to 129.00.
    A one year service agreement would be 179.00 for 3 major and unlimited minor and they would on either of these send me a boot disk. 
    They did a great Diagnostic work I'm just not sold they can fix my problem.
    On the command line   ping 127.0.0.1 gets me Unable to initialize windows Socket, error code 10107.
    Looks like I dead in the water..........

  • Lenovo 3000 N100 0768 DKU Battery problem

    Lenovo 3000 N100 0768 DKU Laptop has battery issues. The battery shows 75% & total battery power remaining @ 76%.
    The battery charge does not change when connected to the system with the AC adapter. The system will only function with the AC adapter attached. The system will not function on battery alone.
    Is there some type of battery re-calibration available?   My husband checked the battery with a meter that shows that it still does have power.  The battery is a Sony LION; the original one purchased with the computer.
    Thanks in advance for any suggestions offered!  
    Rita 

    Try this link: Troubleshooting battery issues - 3000 Family notebooks:
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63099
    If that is unhelpful, there is battery troubleshooting info on page 27 of Lenovo 3000 N100 and N200 Hardware Maintenance Manual.
    The manual supports Lenovo 3000 N100 (MT 0689 and 0768) Lenovo 3000 N200 (MT 0769)
    See this link for the manual
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-63486
    Hope this helps!
    Thank you
    3000 C200 8922-2AU Laptop
    Windows XP Pro
    T5500(1.66GHz), 1.5GB RAM, 80GB 5400rpm HD, 15in 1024x768 LCD, Intel 950, CDRW/DVD, Intel 802.11abg wireless, Modem, 10/100 Ethernet, IEEE 1394, 6c Li-Ion batt.

  • LENOVO 3000 N100 "lock-up", "stall" problem

    My laptop will start, but stall/freeze at any step after pushing the on buttom. It stalled at "window is starting up", "login in screen", afetr login, during loading the start-up programs or few minutes after running any propgram like Internet Explorer or spybot. When it stalled, the mouse is still able to move arond, but nothing happen if you click an icon. If clicking too many times, it beep two times and the mouse stalled. After a lot of try-and-errors, I think I find out the cause (with 80% confidence). Somehow, I.E. is causing lock-up. I have I.E. 7.0 and Window XP. What shoud I do to fix the problem? I tried to remove I.E. 7.0 from my laptop and re-installed back. It didn't work. Then, I tried to install I.E. 6.0. The set-up says it detected a new version of I.E. installed on my laptop and won't install I.E. 6.0 even I.E. 7.0 is already removed. Thanks for the help.

    Try this link: Troubleshooting battery issues - 3000 Family notebooks:
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63099
    If that is unhelpful, there is battery troubleshooting info on page 27 of Lenovo 3000 N100 and N200 Hardware Maintenance Manual.
    The manual supports Lenovo 3000 N100 (MT 0689 and 0768) Lenovo 3000 N200 (MT 0769)
    See this link for the manual
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-63486
    Hope this helps!
    Thank you
    3000 C200 8922-2AU Laptop
    Windows XP Pro
    T5500(1.66GHz), 1.5GB RAM, 80GB 5400rpm HD, 15in 1024x768 LCD, Intel 950, CDRW/DVD, Intel 802.11abg wireless, Modem, 10/100 Ethernet, IEEE 1394, 6c Li-Ion batt.

  • Lenovo 3000 G530 Notebook - Windows XP Installation

    I am using Lenovo 3000 G530 Notebook with Windows Vista. Now I wanted change to Windows XP but it is not recognising Hard Drive. Please help me to install XP in my Notebook

    In the BIOS configuration, change from the SATA controller from AHCI to compatibility mode.
    \\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

  • Lenovo 3000 N100 - Stays on just for a very short time

    I have a Lenovo 3000 N100, Model Type 0689-29U
    Will power up but only stay on for a short time (less than two minutes usually) before it shuts down without any errors. Does not stay on long enough to run hardware diagnostics.
    Have replaced the following items so far:
    1) Main System Board (motherboard)
    2) Both Memory Modules
    3) Power Adapter (power brick)
    4) Hard Drive
    5) Battery
    Still the same results. I am not thinking that the CPU may be either bad and/or it is heating up. I am not sure how the fan on this unit is supposed to behave. In other words, I am not sure if it is supposed to be on all the time or not. When I first power the system up, the fan comes on just for a few seconds then goes off and never comes back on again. I assume that is because this unit's fan is supposed to come on only when needed although not sure.
    If anyone has any ideas and/or any feedback on anything I have written above, I would greatly appreciate your input.
    Thank you.

    remove the battery and plug the ac power, and check if issue persists.

  • Maximum size for Hard Disk in Lenovo 3000 N100

    I have the Lenovo 3000 N100
    it came with 100 GB Hard Disk 5400 RPM
    What is the maximum Hard Disk that can be used. Can it be of 7200 RPM or only 5400 RPM?
    Thanks for possible reply
    Abraham
    Solved!
    Go to Solution.

    @ortegaluis: my hard disk crashed a few days back (i have 3000 n100 and currently running the machine on a 1 gb pen drive )
    was planning to buy a 320/500 GB hdd : seagate or western digital or hitachi (since hitachi was the one intially installed)
    Could you please tell me, which one would be best? (it seems you have experience in the field)
    Do i need to look for specs any other than these: 7200 rpm, 2.5" ?
    Thanks
    PS:  all those who want to know possible behaviors of hard disks before crashes, visit http://datacent.com/datarecovery/hdd/hitachi . Mine gave a clicking sound exactly like the one on the page. Worked for a few days before giving up. If you hear similar sounds, back up your data immediately unless you want to loose it like i did

Maybe you are looking for

  • Satellite P100-275: DVD-RAM drive is always detected at starting

    Hi, I have a problem with my Satellite P100-275, All the materials are correctly installed, but when the PC starts, I have always "new material detected" for : hl-dt-st dvdram gma-4082n. I tried to install connecting to Internet, I tried with the c:\

  • How can I get the tracks on my Ipod to play at the same volume

    I want the tracks on my ipod to play at the same volume - does anyone know how to do this? Is it done in itunes or on my Ipod (or can't I do this)

  • Forced Save process in activate page

    Hi, It's possible to forced to save (make dosave or dosavenow) in activate page with peoplecode only ? (i would like to save directly if %mode = A ) peopletools 8.5 Thanks in advance

  • Cron job error

    I get this message in my local mail: Subject: fcron <systab@morgana> /usr/sbin/run-cron /etc/cron.daily Date: Wed, 21 Dec 2011 00:02:47 +0200 (EET) From: [email protected] (fcron) Status: R col: Invalid or incomplete multibyte or wide character it's

  • Adobe Reader is "forgetting" the last view settings

    Hello, I'm having a small problem with Adobe Reader X. I checked the "Remember last view settings" option, and it's working fine, but the problem is that if I don't open the  document for a few days, the document loses the information about the last