Lenovo 3000 n200 close lid goes dark after upgrade the BIOS. Please HELP!!!
The lid is set to do nothing but the screen turns off and i cant get it back on by using the keyboard or mouse.
Only way is to use function keys to standby and bring it back.
My notebook configs as below:
CHI XP Pro
Bios version: LENOVO 66ET42WW (1.16 ) 04/03/2008
Display Driver version: 6.14.10.4977, 8-11-2008
I found this prolem on 3000 v2000 (0764-a46) too.
- os : windows xp sp3 (also in windows xp sp2) but this problem doesn't found in windows vista
- cause : i found that after i'm install vga driver this problem is occur (but uninstall vga driver this problem isn't occur)
I think lcd is turn off but system doesn't hang because i try to press windows + U + U (shut down windows) then system is turning off.
if i press windows + U + R (restart ) system is restarting but lcd isn't turn on
i search this problem on internet and found similar problem on other product they says: windows try to swap primary display and secondary display
Similar Messages
-
Why my hp mini 5101 the "7" key doesnt work after upgraded the bios?
why my hp mini 5101 the "7" key doesnt work after upgraded the bios?
The current bios version is F.07korpx,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
I lost some of my contacts after upgraded to ios6, please help!
I lost some of my contacts in my iPhone 4S after upgraded to IOS6, please help!
Backup is your best option if you have one. Reverting software will not bring the contacts back.
-
Lenovo 3000 N200 ( 0769- A63) 0769 BAG processor upgrade limit and type
i have folloing system properties
TYPE
0769-A63
07/12
Name
Lenovo 3000 N200 Notebook (0769-A63)
Specs
Based on 0769-BAG: T2330(1.6GHz), 2GB RAM, 120GB 5400rpm HD, 15.4in 1280x800 LCD, Intel X3100, CDRW/DVDRW, Intel
802.11abg wireless, Bluetooth, Modem, 10/100 Ethernet, Secure chip, Fingerprint reader, Camera, 6c Li-Ion, DOS
License
Chipset: Intel 965 Express Chipset probably
i want to upgrade my processor to core2duo etc
what will be the type/types of processor/s that can be used to upgrade it and what is the upper limit of speed of processor that can be attached
thanks
Moderator Note; s/n edited for member's own protectionWow, thank you, what an awesome little tool!
So, I found that these 2 RAM products are compatible with my laptop:
Part Number: CT758799
Module Size: 2GB
Package: 200-pin SODIMM
Feature: DDR2 PC2-6400
Specs: DDR2 PC2-6400 • CL=6 • Unbuffered • NON-ECC • DDR2-800 • 1.8V • 256Meg x 64 •
Part Number: CT699699
Module Size: 2GB
Package: 200-pin SODIMM
Feature: DDR2 PC2-5300
Specs: DDR2 PC2-5300 • CL=5 • Unbuffered • NON-ECC • DDR2-667 • 1.8V • 256Meg x 64 •
I then went to a well-known auction site and found RAM cards from the same manufacturer with exactly the same specs as above but with different Part numbers. Does it have to be the exact part number or do I stand a good chance of it working if it has the required spec? I searched for the exact part numbers and yielded 0 results.
Thanks for all your help on this. -
My macbook pro run slowed after upgrade to Yosemite, please help!
Why my mac slowed after I upgrade to Yosemite, Please help!
You might want to update your profile. Helps people trying to help you.
Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy
Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor. Please use copy and paste as screen shots can be hard to read.
Etrecheck – System Information -
PowerBook G4 17 won;t start after upgrading Hard disk Please help!
Hi Folks! need your help in order to diagnose aPowerBook G4 1Ghz Serial V731556CMVZ. It worked perfectly untill start to have problems with hard drive. I bought a new Seagate Momentus 7200RPM and followed the instructions ifixit.com without any problem.
After finishing, the PowerBook won't start. I can not hear any noise form HD, or SuperDrive, no startup chim sound.
I disasembly and assembly again the PB and nothing. I try to reset PRAM SHIFT CTRL ALT POWER and nothing.
It's frustrating. Please Help!I would make sure the keyboard ribbon is squarely seeded and in the right position. That clip is extremely tiny and fragile. Any damage to it whatsoever could cause major issues. Did it fracture at all during the installation process?
-
FCP 7 image is clear, when you play is dark, after upgraded the lion.
hello friends, good afternoon
upgraded my mac the lion,
but the final cut this strange,
canvas when it stopped over the image the image is clear, when you play is dark.
what is happening?
someone has a solution to my problem?
grateful
JR Paulihello, Michael Grenadier.
That's what you said I totally agree.
but in the final cut, the image is loaded and GAMA, high contrast,already playing the video on it fika finder normal.
grateful
Jr Pauli. -
Timeline Video Layer goes blank after 4 seconds! PLEASE HELP
I'm trying to create a time-lapse video using Photoshop CC.
I follow the steps presented in this tutorial:
Assembling a time lapse | Photoshop | lynda.com - YouTube
I have done this before successfully, but now when I bring the Video Layer from File onto Timeline, Photoshop only plays 4 seconds and 2 frames of the footage (stills); the rest of the sequence is blank. I tried exporting and the same issue persists. I did not have this problem before. I'm using TIFF files as before.
Please tell me how I can bypass this issue. I have tried importing the footage (stills) which are after the 4 second mark ON THEIR OWN (starting my import selection from a later point in the timee-lapse sequence), and the files open and play well. It is as if there is a 4 second and 2 frames limit set on the timeline.roshanv
If your program is Photoshop CC, you have posted in the wrong forum. Some how your thread got posted in the Adobe Premiere Elements Forum.
Please re-post your thread in the Adobe Photoshop Forum or wait for a moderator to see your thread here and move it from here to there.
Photoshop General Discussion
Do you have any version of Premiere Elements? It will do a great job for you for Time Lapse video. If you have Premiere Elements, I would encourage you to read
the following
ATR Premiere Elements Troubleshooting: PE: Time Lapse Video Basics
ATR Premiere Elements Troubleshooting: PE: Numbered Stills in Time Lapse and Other Animations
and consider your Time Lapse video in Premiere Elements.
In the morning, I will look at the tutorial that you are working with to determine if I can detect the cause of your issue. I do not work with Photoshop CC, but I will see what I can put together. But, Adobe Photoshop Forum should be able to give you good immediate first hand input.
ATR -
I can't access Windows 7 through Bootcamp anymore after upgrading to Lion, please help
Hi All.
I just recently upgraded my operarting system to the new OS X Lion. I had Windows 7 running through Bootcamp. Now every time i try and start windows like I used to, the computer restarts but then i get a black screen with text on the top left saying something like "no system disk". What i'm saying is that i cannot get into windows anymore since I upgraded. Anyhelp will be highly appreciated pleaseIt shows only two options and it recognise my ext dvd-rw then i partition for boot camp partition but after the partition that restarts automatically then blank screen displayed infinitely give me solution
-
N95 hang after upgraded to v30, please help
Hi,
I upgraded my N95 using Nokia Software Updater to v30, NSU shown updated completed. After power down the phone and powe up again, the N95 unable to power up and show the "NOKIA" logo only.
I removed the baterry and power up again, it only showing the "NOKIA" logo only, pleae help.
Thanks,Try booting it without the memory and sim card in.
If that fails to work try the hard reset which will revert it to a fresh out of the box state with all data wiped.
Hard reset:
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
3. While holding these buttons, hold the power button for a second to switch on the phone.
4. Release when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
It may take a few attempts and very flexible fingers.
If that still fails then your only option is the nokia care point.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair. -
Drivers are somehow missing after upgrading iTunes. Please help
I have had this problem for months now and have just dealt with it, but after getting a problem fixed with my iPod Classic, I thought now would be the right time to finally find out something about this and maybe get the problem solved...
When upgrading my iTunes version, the install seems to go fine, but about halfway through the install process I lose my internet connection... the new iTunes will install completely and work fine, but from the time I lose the internet connection, Windows is unable to find any networks because somehow the drivers for my network adapter seem to be missing...
The only thing I've been able to do to get my internet connection/drivers back is to use System Restore and restore the system to a few days back, and of course go back to the old version of iTunes. I've probably tried upgrading 10 times or more since the first time this happened as more updates are available, but the same thing happens every time... It would be nice to update, since I've been having a few issues with iTunes lately that upgrading might help fix (maybe?), but if it means choosing between an internet connection and a newer version of iTunes, then of course I'm not upgrading.
Can anyone tell me why this is happening and what I can do? Thanks.The problem is still there with iTunes 9, and nobody has even attempted to answer my question... My mom "accidentally" installed the upgrade again this morning, and I almost missed my online class because I had to restore the computer. Can anybody tell me anything? Or am I just stuck ignoring the update windows and using an old version of iTunes forever? Half the pages on the store tell me to upgrade to see the content, and it's really, really annoying me. Next, I probably won't even be able to sync my iPod without it telling me to upgrade, and I can't...
-
Photo stream not working after upgrading to maverick please help?
have upgraded to Maverick from osx lion
sooo much trouble ......memory low
photo stream not working
everything slow
any ideas?On your Mac disable Photo Stream in the System/iCloud preference pane
and in iPhoto's Photo Share preference pane.
Reboot and reenable both respectively. That should jump start Photo Stream.
OT -
Lost photo library after upgrade to Lion -- please help me find it?
I have just upgraded to Lion, and started setup for iCloud.
I can't find my photo library on my Mac.
I tried upgrading to iPhoto 9.2, but the install didn't work -- got stuck on "searching for photos"
The photos do appear in iPhoto, but not in the library?
My backups on a separate hard disk may be ok, but I thought the library used to have the list of photos. All I can see is the icon. I hesitate to open anything, as I don't want to lose all of my photos....
Please advise.The photos do appear in iPhoto, but not in the library?
Please explain. iPhoto displays photos from the iPhoto library - if you have photos in iPhoto then you have an iPhoto library
Are you trying to access your photos? You do not do that directly into the iPhoto library - that has never been a support access method - you use the media browser
What exactly are you trying to do?
LN -
HT1212 iPad still locked with password even after erasing the device, please help!
My iPad was locked because I forgot my password; I followed the step by step instructions to recover my iPad but it still asks me for a password to access the device even though the device should have been erased. Please help!?!
Is this how you do it?
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
Screen goes dark after dialing
When I place a call using my contacts or my keypad, the screen goes dark after hitting the green "send" button. It stays dark until I hang up. How do I get the screen light to stay on when I place a call?
This phone has a sensor if you put the phone to your face or even put your hand over to near the top of the screen it will go dark. There is a sensor to prevent false activation of the touch screen.
I found when my phone is working on the car adabter it goes dark rather fast when I make a call. I use a Bluetooth earphone most of the time with this phone. I don't feel comfortable holding it to my ear.
If I see the screen go dark and I need access, I simply run my finger up from the bottom of the screen to bring it back to life.
I am going to look in to this part of the phones operation a little more closely to see if there is anything else I can bring up about this...
Jerry G.
Maybe you are looking for
-
I want to find out how to add my mixed CD's under the folder of the artist. I want to save them on my computer in itunes. I want to NAME the album, but so far I haven't been able to do that. I named ONE and then ALL the rest of the CD's I am tryin
-
Syntax error on include of Function Module (user exit) EXIT_SAPLRSAP_002
When I do a syntax check in the a routine within inlude ZXRSAU02 of FM EXIT_SAPLRSAP_002, I get an error. This object has been in production so I must be doing the syntax check incorrectly. The error is 'Field i_t_data is unknown. It is neither in o
-
I'd like to create my own private WiFi network from a public WiFi network
I am often in locations where there are open WiFi networks and I'd like to use an Express to create a private WiFi network from the available public one.? If the express can't do it on it's own can I add another router to make it work? I have etherne
-
Great videos for getting started on BC with Muse or Dreamweaver CS6
Hey all, Just thought I'd share some helpful videos now available. This is great for new creative cloud users wanting to get their head around BC. Getting Started with Business Catalyst and Dreamweaver CS6 – What is Business Catalyst? Getting Started
-
Do I need a new PS??
I am getting inconsistant scores for my CPU in AM3. I Started doing some digging and I think I might have found the cause. In PCAlert 4 my readings are as follows: Vcore=1.62, +3.3v=3.22, +5v=5.00, +12v=11.70 I am wondering if others would agree that