Lenovo a6000 3g speed issue

Hi,
I recently puchase Lenovo a6000 in India from Flipkart. Inserted 3G enabled SIM Card in 4G/3G/2G slot. I enabled the data and tried to use it for some time but the speed was very less. Installed Speedtest.net to check the speed and noticed that the speed is always around 325kbps.
Just to make sure I inserted the SIM card in Motorola Moto E and noticed that the 3G speed is around 5-6MBPS. Concluded that the issue is with Lenovo a6000 handset.
Also, I noticed that i'm not getting appropriate speed with Wifi as well. I have a ISP with 4MBPS speed but I whenever I check the speed I get around 3.34MBPS only.
I have attached screenshots below for both 3G and Broadband data speeds.
Can you please help me to fix this.
LINK TO IMAGE 1
LINK TO IMAGE 2
Moderator note: Large image/s converted to link/s About Posting Pictures In The Forums

in 3g speed 300kbps is not a matter airtel provides nearly 1mbps iam also facing the same problem lenovo cheating custamers by saying fake featuresrsouradipta wrote:
I was also facing the same problem with my lenovo a6000,purchased from flipkart.
However the matter got resolved once i changed my network provider.
Previously i was using a reliance smart 3g connection in kolkata,and was getting a download speed of about 15-20 kBps.
To check if my phone was defective or not, i used an airtel sim which gave me a speed of about 300-400 kBps.
Although i did not get a permanent solution, but switching network helped me.
Please check with other network provider and leave a comment below.
Thanks in advance.

Similar Messages

Lenovo A6000 Plus charging issue

issue is that when i connect the wall charger to my lenovo a6000 plus it shows "usb computer connected" and then the phone won't charge.. not sure what is the problem. i connected the ac adapter wall charger then how come the phone shows "usb computer connected".. This problem starts 1 month back suddenly. earlier there was no issue.. can someone help me in this issue.. lenovo team ??

I am facing this issue since yesterday. Does anyone have a solution for this?

Heating issue lenovo a6000 plus

What is the normal temperature of A6000 Plus ??

Hi,i have observed the same issue with my Lenovo A6000 Plus.I inserted memory card (7GB was full out of 8GB) loaded with images, songs, videos etc.Phone started heating up badly just like heater when i launch gallery app to check images & videos. but it failed to load images.Then i checked music app to play some sound tracks. i faced the same i.e. songs did not get fetch from SD card.I went in battery settings to check what application is consuming battery. i found that "Mediaserver" application is consuming battery above 70%. Same SD card i inserted in other phones like Motorola. there it works smoothly without any heating issue.I guess lenovo team should fix this problem because eventhough we insert formated SD card, one day it will get full and will face this problem in future too.

Wifi issue in lenovo A6000

I am having problem in getting wifi signals on my lenovo A6000. The device is not able to show the available signals.But using my laptop wifi some signals are visible. but the device is not showing any signals. The message what i get is "Searching for WLAN networks.....". I'm trying to connect the device using "Wireless ad hoc network".But unable to discover the wifi signal. Not even other signals which are available. Can I get any help........

hi,
im not representing lenovo here, i am a user just like you. i was trying to help on what i know

Lenovo A6000 very low ram

I am facing very low ram issues. even after clearing ram by default ram cleaner I only get 110-115 mb ram.
I also donot recieve real time whatsapp notifications but i am receiving gmail notifications even after clearing ram.

when i first time boot my lenovo A6000 i had around 400mb ram free, then after 3days of reguler usage now i have only 50 to 100mb ram free.
when i kill all apps by deafault kill app it shows between 180 to 250mb ram free but again after 10-15sec it shows between 50 to 100mb ram free.
i also updated my device current version - Kraft-A6000_S029_150212.
ram is very low beacuase of this vibe ui ?
please lenovo solve this low ram issue.
Moderator comment: Please don't create new threads regarding the same issue/question as it splinters the discussion.

Lenovo A6000 displaying all contats as unknown(Not even displaying Caller's Phone Number in details)

Hi guys,
I recently bought a lenovo A6000 smartphone. Whenever i receive a call it is not showing any Caller ID details(not even Caller's Phone number). It is showing as Unknown caller and in details there is no information regarding phone number.
Can somebody please help me in fixing this issue.
Thanking you in advance.

It looks to me that itsTalkTalk you should be annoyed with, someone moving into an adjacent flat, so the address will be very similar, calls whoever they want to use, you seem to think it's BT but don't say why you think it's BT, and says they want service, the customer service rep incorrectly identifies your mothers flat and says there is already a line in the flat, do you want to take it over, they obviously said yes, this is what generated the letter from TT, and when you called them they should have rejected the takeover and the whole job would have been cancelled, this obviously didn't happen. The line in the exchange is swapped over, that's why for a short period your mother had another number on the line, confirmed by the fact you got a call from another number , called it back and your mother answered, and she got a call on that number from someone calling their own mother, but yours answered... The person from the other flat reports a fault, line not working, it never could work as the order was a takeover not a provide, Openreach send an engineer who moves the physical cable pair from your mothers flat to the other persons flat to give them service, because they have a valid account and your mother no longer has. TT should have followed your instruction when you said you hadn't asked for the line to be taken over, and presumably the new 'neighbour' should have taken more care when calling their provider with the address, and shouldn't have said yes to taking over an existing line when they couldn't have been sure there was a line in their flat. Its not much help, but these things happen in multi occupancy residences, especially when someone doesn't know if a line exists where they are moving to, and who the service provider with that line is. Even if you are correct and the new neighbour with your mothers 'line' is with BT, they are unlikely to be able to do anything for a TT customer, it's up to TT to sort this out for you and your mother.

Lenovo A6000- Failure of Contact Manager on Update

After updating my Lenovo A6000 to Craft-A6000-m_S021_150616, Am receiving tect messages on failure of the contact manager. Please Advice

Hi, I found there are other issue apart from contact manager crash issue after upgrade from Jelly bean to KitKat 1. in the same way google chrome is also crashing after trying to open gmail and start enetering username2. caller name is not displaying while getting incoming or outgoing calls3. I found some suggestion in the same community website that first take a backup, delete all the contacts, and them import it back to solve the issue. But why we need to do these, why this issue is happening after upgrade4. however I deleted contacts and tried export from the storage. While doing so, Contacts->Menu->Import/Export contacts->Import from storage, it finds and displays all the .vcf files. Very good, but there is no select button to 'select all' the vcf file to import to the address book. I don't want to sit and select each .vcf file from the list to import it as there hundreds of contacts. I think 'select all' option is missing after upgrade. I heard, in kitkat version some performance issue is fixed but now it seems to be many basic functionality features are not working after upgrading. We are all waiting for your response and good kitkat upgrade notification in our mobile. Thanks,Sharath

Lenovo A6000 update Kraft-A6000_S035_150507

I have bought Lenovo A6000 about 20days back. Now it shows an update is required for Vibe UI. My version is Kraft-A6000_S031_150301. And the new update version is Kraft-A6000_S035_150507 . Anybody updated to this version? What is the benefits or Issues of this update? Anybody updated? Please share your views. Because updating sometimes leads to unexpected behaviour of handset.

Hey,
I have update to version s035 from s032, its jus 9 mb update. Nothing specific is mention by Lenovo in any update other than system stability or bug fixes. We only have to explore what's new ...anyways go ahead & update Lenovo keep pushing such small updates may be to keep user engage in finding what's new so that they won't bug them by asking where is lollipop update which is too delayed.

When will be the lollipop upgrade for Lenovo A6000+ ??

Hi ,Am using lenovo A6000+ mobile,i want to know exactly when there will be lollipop update for lenovo a6000+ ??
As you mentioned in OS upgrade matrix (On July) ,you supposed to give to lollipop by last month itsetlf but you didnt.
See after there update xxxx615 firmware ,my mobile battery draing fast and camera pic has loads of grains.I think that update you provided is not stable one,So Provide us some stable update to fix those above issues.
And Also Provide us lollipop update for Lenovo A6000+ ASAP.
orelse let us know when will be the lollipop update.We are waiting long for lollipop Update.
So tell us when will be the lollipop for Lenovo A6000+ ?? provide the update ASAP.Thanks,Kishore kumar

Hello Dr. Lamb,
thank you for your fast reply here.
Yes, the actual firmware from last year September
Is already installed. Also I am checking almost in every day the firmware update page since almost half a year.
I did contact the hotline support also several times for.
I was informed about that they will publish an update, but not when.
Also there was a statement from the Toshiba CEO already in last year that all UHD TVs with the Cevo engine
will get this update in last year.
Its a pity and seems a neverending story. I am totally disappointed.

Lenovo A6000 crackling sound

I have recently bought a lenovo A6000 and I am facing crackling sound issue whenever I am playing music or watching videos on both headset and loudspeakers. Please tell me whether it is a software issue or I have a defect in my unit.
There is one more thing I want to ask when I clear recent apps like WhatsApp or Facebook the apps are killed as soon as I close them. They don't run in background . Is it a feature of vibe ui or a bug
Solved!
Go to Solution.

Frns.. It is issue with hardware.. Just turn back ur phone and hit gently somewhere around camera or flash light.. U can hear crackling sound..

Lenovo A6000 decryption process

Team can some one help he in decryption process of my Lenovo A6000 mobile.. Unfortunately i did encrypt to check what is happening and end up with several issues..

Can lenovo support help at the earliest? I'm not able to install apps on SD card after encryption

Lenovo A6000 RAM management observations

Hi lenovo,
I have made few observations which i believe are issues and need to fixed by lenovo.
I have been using Lenovo A6000 since a week and noticed the following.
1. Initially the RAM on first boot was around 460 MB.
2. After using it for 2 days, i observed the RAM was around 50-100mb free.
3. When i play a game and pause it and go to home and again when i open it, the games starts from the beginning but not from where i paused it. This is not the case with apps.
4. Sometimes the apps like Skype, Ucbrowser does not get installed on the SD card and displays message as " Unable to install on the location"
5. When i set pattern Unlock, i have to press a bit hard at the points to get it unlocked.
6. The RAM sometime shows very low(50- 100 MB free) and sometimes show around 400mb free.
There is a problem with RAM algorithm for sure.
I have updated the phone to the latest update available.

Also sometimes
1. autorotate gets activated automatically.
2. Audio profiles changes to outdoor automatically.

Lenovo A6000 Plus touch screen not responding

I own a Lenovo A6000 Plus mobile. Some parts of my screen do not respond at times but after a few hours it again starts responding. This cycle has been repeating for a month. Kindly suggest me a solution and whether this is a software or hardware issue.

Hello Sir, I had recently buyed a Lenovo A6000 plus smartphone from flipkart around 8-9 days back. From the very first day It's touch was sometime not responding for which I had to press power button twice and it continued to work.So I had not taken this problem seriously. But from last 3 days it frequenty stops responding and many a times automatic touch events are occuring When I downloaded a Multitouch Testing App Then I found that central part of the touch is mostly in touched state so that when I touch it's actually second touch for my mobile.Since blue dots appear for first touch event and Red for second touch .I Informed this issue to Flipkart for which they asked me to download their smartapp and their executive asked me to open that app and touch the screen. I followed same process. On the next day they informed me That they were not able to find any manufacturing defect in it. So they asked me to reset my phone and update the software I followed same steps but still problem is not fixed. So I want to ask that is this really a software problem or Flipkart is actually trying to fool me?? Thanks for replying.

Speed Issues

Greetings and Salutations,
I'm having speed issues with my Adobe AIR application. From what I've read on the web, AIR is supposed to be fast at drawing graphics. I am writing an application which has multiple screens. On one of the screens I have a tab (SuperNavigator) which has a canvas on it. That canvas has a series of other canvases (built with a repeater) that have graphics in them. I am having speed issues when I have more than 50 of these children canvases. I've tried running it without the graphics (code below is without the graphics) to see how it performs. When I have 954 of these canvases being drawn it takes about 2.5 minutes to draw. This is unacceptable and I'm wondering if this is something I've induced or if AIR was never meant to handle such a large amount of canvases (actually this isn't a large amount, in a real world environment there could be a lot more). I've included relevant clips from the code. There are a couple empty boxes that in the real application will hold graphics.
The class withing the Tab Navigator is a canvas.
In the action Script (the setter line takes 2.5 minutes to get past) (it's binding to the repeater that seems to be my problem).
[Bindable] private
private var _assetList:Array;
[Bindable]
public function get timelineAssetList():Array{
     return this._assetList;
public function set timelineAssetList(ac:Array):void{
     this._assetList = ac;
The MXML code that is being bound to:
<mx:Canvas id="labelCanvas" left="0" right="0" top="0" height="65" verticalScrollPolicy="off" scroll="scrolling(event)">
      <mx:HBox horizontalGap="1" left="10" right="10" top="10">
          <mx:Spacer width="2"/>
            <mx:Canvas width="{getHeaderWidth()}" height="40" borderStyle="solid" borderColor="{StaticVariables.borderColor.getColorUint()}" horizontalCenter="0">
            <PastDataView:ColorBarScale id="scale" bottom="10"/>
     </mx:Canvas>
          <mx:Canvas width="20" height="40">
               <mx:Spacer width="20" />
          </mx:Canvas>
     </mx:HBox>
</mx:Canvas>
<mx:Canvas id="assetCanvas" left="0" right="0" bottom="0" top="65" scroll="scrolling(event)">
     <mx:VBox y="10" right="16" left="10" verticalGap="0">
          <mx:Repeater id="assetRepeater" dataProvider="{timelineAssetList}">
               <mx:HRule width="100%"/>
               <PastDataView:ColorBarBar id="barArray" width="100%" height="170" asset="{assetRepeater.currentItem}"/>
          </mx:Repeater>
     </mx:VBox>
</mx:Canvas>
The ColorBarBar consists of:
<?xml version="1.0" encoding="utf-8"?><mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml" width="400" height="300" xmlns:PastDataView="org.XXXXXX.CenterScreen.PastDataView.*" horizontalScrollPolicy="off" click="clicked()">
     [Bindable]
     public static var _colorBarHeight:int = StaticVariables.colorBarHeight;
     [Bindable]
     private var _asset:Object;
     [Bindable]
     public function set asset(a:Object):void{
          this._asset = a;          getBackgroundColor();
     public function get asset():Object{
          return _asset;     }
      private function getBackgroundColor():void {
          var color:String = asset.color;
          if (color == null) color = "Black";
          if( color.toLowerCase() == "blue" ) {
               lblAssetTag.setStyle("color", 0x1674cc);               lblAsset.setStyle(
"color", 0x1674cc);          }
else if( color.toLowerCase() == "red" ) {
               lblAssetTag.setStyle("color", 0xe35353);               lblAsset.setStyle(
"color", 0xe35353);          }
else if(color.toLowerCase() == "grey" || color.toLowerCase() == "gray") {               lblAssetTag.setStyle(
"color", 0xe55555);               lblAsset.setStyle(
"color", 0xe55555);          }
else { // give it a default color                lblAssetTag.setStyle(
"color", 0x000000);               lblAsset.setStyle(
"color", 0x000000);          }
      private function calculateActivityRepeaterHeight():int{
          return this.height-50-_colorBarHeight;     }
      public function clicked():void{
          dispatchEvent(new SelectAssetEvent(this._asset, false, false, true));     }
     ]]>     </mx:Script>
       <mx:VBox left="0" top="0" right="0">
           <mx:Spacer height="1"/>
           <mx:HBox>
                <mx:Spacer width="2"/>               <mx:Label id="lblAssetTag" text="{asset.type}: " fontWeight="bold" fontSize="12" doubleClickEnabled="true" doubleClick="titleClicked()"/> id="lblAssetTag" text="{asset.type}: " fontWeight="bold" fontSize="12" doubleClickEnabled="true" doubleClick="titleClicked()"/> id="lblAssetTag" text="{asset.type}: " fontWeight="bold" fontSize="12" doubleClickEnabled="true" doubleClick="titleClicked()"/>
               <mx:Label id="lblAsset" text="{asset.name}" fontSize="12" doubleClickEnabled="true" doubleClick="titleClicked()"/>
                <mx:Label id="lblAssetId" text="{'(' + asset.id + ')'}" fontSize="12" visible="{mx.core.Application.application.debugMode}"/>
           </mx:HBox>
          <mx:HBox horizontalGap="1">
                <mx:Spacer width="2"/>
                <mx:Spacer width="10" />
                <mx:VBox width="100%">                    <mx:VBox>
                    </mx:VBox>
                    <mx:VBox id="displays" verticalScrollPolicy="auto" height="{calculateActivityRepeaterHeight()}" horizontalScrollPolicy="off">
                    </mx:VBox>
               </mx:VBox>
          </mx:HBox>
          <mx:Spacer height="2"/>
      </mx:VBox></mx:Canvas>
I would appreciate any thoughts or feedback you could provide.
~martin

The Canvas is a very heavy object that has lots of overhead. Even worse is the VBox object that is in there multiple times.
What exactally are you trying to accomplish? Just looking over the code, it seems that the same could be done directly with the Graphics API, at a much faster rate.
For each of the VBoxes and Canvases you have, the entire size of each child and parent need to be re-evalulated each time you add or change something. This is a HUGE overhead, and probably why the app is running so slow. You may need to convert this app to use simpler objects (UIComponent or something lower-level like that) to get any speed.
Are you using Flex Bulder? Take a look at the app while the Profiler is running to see what I'm talking about.

Speed Issues Fixed In 9.1.2

Lost all my thumbnails updating to iPhoto 9.1.2 but rebuilding the thumbnail database solved the problem. Best of all, the speed issues are finally gone in iPhoto 9.1.2. Opening the application is way faster again (2 seconds as opposed to 12 seconds or more). Scrolling is way faster again. Can't believe it took this long for Apple to fix this mess. Nevertheless, iPhoto '11 feels like iPhoto '09 once again. Thanks Apple.

Lost all my thumbnails updating to iPhoto 9.1.2 but rebuilding the thumbnail database solved the problem. Best of all, the speed issues are finally gone in iPhoto 9.1.2. Opening the application is way faster again (2 seconds as opposed to 12 seconds or more). Scrolling is way faster again. Can't believe it took this long for Apple to fix this mess. Nevertheless, iPhoto '11 feels like iPhoto '09 once again. Thanks Apple.

Lenovo a6000 3g speed issue

Similar Messages

Maybe you are looking for