Lenovo b50 doesn`t start

I buyed today an lenovo b50 laptop and it doesn`t want to start. When i press the button it becomes green for few seconds and than black again. I have also tryed with the recovery button, but the same thing. What should i do? It means that the laptop is defect?

hi daniela-c,
Welcome to the Forums.
1. Plugin the AC adapter for about 1hr and let the battery charge then try starting the machine (the factory battery should be precharged but it could have drained -- in some models, this is a safety design to prevent damaging the system due to insufficient power).
2. If the problem remains after doing Step 1 above, turn off the computer, remove the AC adapter and battery then press and hold the power for 30secs. When finished, plugin the AC adapter and power up the machine and observe.
If the problem remains, there's likely an internal component that's malfunctioning. In this case, I recommend you contact lenovo (for service) or the place of purchase (if it's still possible to get a replacement unit).
Support phone list
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

[T410s] Lenovo Software doesn't work for me

Hi,
System:
- T410s 2912 W69, (8 GB RAM)
- Windows 7 Prof. 64bit
The following software is installed on my system: Office Prof. Plus 2010 (64bit), SQL Server 2008 R2 (64bit), Visual Studio Ultimate 2010, Sybase Powerdesigner 15.2, Adobe Reader 9 and Kaspersky IS 2011.
Since some days nearly the whole Lenovo Software doesn't work. The only exception is System Update 4.
When I try to start e.g. Lenovo Toolbox I get the error message "ThinkVantage Toolbox doesn't work...". A View into the Windows solution center offers the following message:
Beschreibung
Stopped working
Pfad der fehlerhaften Anwendung: C:\Program Files\PC-Doctor\pcdrcui.exe
Problemereignisame: CLR20r3
Problemsignatur 01: pcdrcui.exe
Problemsignatur 02: 6.0.5692.7
Problemsignatur 03: 4c87004b
Problemsignatur 04: PresentationCore
Problemsignatur 05: 3.0.0.0
Problemsignatur 06: 4b594d40
Problemsignatur 07: 5017
Problemsignatur 08: 0
Problemsignatur 09: System.TypeInitialization
Betriebsystemversion: 6.1.7600.2.0.0.256.48
Gebietsschema-ID: 1031
The same problems occured in starting e.g. the lenovo power manager, the fingerprint reader etc. and the graphics properties window (gfxui.exe)
Beschreibung
Stopped working
Pfad der fehlerhaften Anwendung: C:\Windows\System32\GfxUI.exe
Problemereignisame: CLR20r3
Problemsignatur 01: gfxui.exe
Problemsignatur 02: 8.15.10.2154
Problemsignatur 03: 4c2053e7
Problemsignatur 04: PresentationCore
Problemsignatur 05: 3.0.0.0
Problemsignatur 06: 4b594d40
Problemsignatur 07: 5017
Problemsignatur 08: 0
Problemsignatur 09: System.TypeInitialization
Betriebsystemversion: 6.1.7600.2.0.0.256.48
Gebietsschema-ID: 1031
I also try to reinstall the ThinkVantage Toolbox via http://web.lenovothinkvantagetoolbox.com/index.html. The installation fails with the following protocol:
Informationen über das Aufrufen von JIT-Debuggen
anstelle dieses Dialogfelds finden Sie am Ende dieser Meldung.
Ausnahmetext
System.UnauthorizedAccessException: Der Zugriff auf den Pfad "full_5692_08_64_00.exe" wurde verweigert.
   bei System.IO.Directory.DeleteHelper(String fullPath, String userPath, Boolean recursive)
   bei System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive)
   bei appupdater.utility.ProcessLauncherManager.DeleteFiles(String exePath)
   bei appupdater.utility.ProcessLauncherManager.LaunchProcess(String exePath, Boolean bWaitForExit, Int32 sleepInMilliSeconds, String buildID)
   bei appupdater.formcontrols.download.DownloadProgressFooter.LaunchInstall()
   bei appupdater.controllers.UIBuildIDManager.NotifiyDownloadDelegate.Invoke(Boolean bFlag)
   bei appupdater.controllers.UIBuildIDManager.UpdateDownloadComplete(String buildID, String saveFileName, DownloadStates state)
   bei appupdater.utility.DownloadLargeFile.m_webClient_DownloadFileCompleted(Object sender, AsyncCompletedEventArgs e)
Geladene Assemblys
mscorlib
    Assembly-Version: 2.0.0.0.
    Win32-Version: 2.0.50727.4952 (win7RTMGDR.050727-4900).
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll.
mscorlib.resources
    Assembly-Version: 2.0.0.0.
    Win32-Version: 2.0.50727.4952 (win7RTMGDR.050727-4900).
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll.
appupdater
    Assembly-Version: 1.0.5551.3.
    Win32-Version: 1.0.5551.03.
    CodeBase: file:///C:/Users/STEPHA~1/AppData/Local/Temp/nsk41D2.tmp/appupdater.exe.
System.Windows.Forms
    Assembly-Version: 2.0.0.0.
    Win32-Version: 2.0.50727.4927 (NetFXspW7.050727-4900).
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll.
System
    Assembly-Version: 2.0.0.0.
    Win32-Version: 2.0.50727.4927 (NetFXspW7.050727-4900).
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll.
System.Drawing
    Assembly-Version: 2.0.0.0.
    Win32-Version: 2.0.50727.4927 (NetFXspW7.050727-4900).
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll.
System.Configuration
    Assembly-Version: 2.0.0.0.
The rest of the software mentioned above works great and fast. Only the Lenovo software doesn't work. This is rather annoying, because I can't change e.g. important property values in the power manager.
I've deinstalled and installed (manually) again graphics driver as well as the troubleshooting software without success.
What shell I do now?
Regards
Dorian
Moderator edit: Title adjusted to better reflect message content

Dorian,
You found me! Thanks for the logs. They confirmed what I was suspecting: a font problem is causing any application built on Windows Presentation Foundation (WPF) to crash. Based on our research there are two potential issues. The fixes are pretty easy.
One or more of your installed fonts does not have a proper date/time
The Registry may have some invalid font path entries
To Detect and Fix the Font Invalid/Missing Date Problem
Open an elevated command prompt (CMD.EXE) and navigate to C:\Windows\Fonts\
Save a font listing to your desktop with the command: DIR *.* /tw /od > %USERPROFILE%\desktop\fontlist.txt
3. Open fontlist.txt with notepad.
4. Remove any fonts with a missing or invalid date (January 1, 1601 for example). Easiest way to do this is by opening Windows Explorer, going to the fonts folder (C:\Windows\Fonts\), and removing the offending fonts.
5. Open LTT or one of the other TVTs to see if the problem is solved. If not, continue with the next section.
To Detect and Fix the Font Registry Problem
WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. I cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk!
Open the Registry Editor (REGEDIT.EXE)
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts
Scan the "Data" column for each font looking for any illegal path characters
If any are found, remove the offending characters. Here are some blogs that may offer additional insight: http://code.logos.com/blog/2009/11/how_to_crash_every_wpf_application.html and http://alissonsol.blogspot.com/2009/02/when-wpf-applications-dont-start.html
Let me know how it goes.
Stephen Streufert
Senior Product Marketing Manager
PC-Doctor, Inc.
http://www.lenovothinkvantagetoolbox.com

When i double-click the mozilla icon, it doesn't start. In the task manager i noted that the process "firefox.exe" appears and desappear after 5 seconds. The problem remains in mozilla safe-mode, but not in windows safe-mode. Thks!

Yesterday i installed the firefox 6.0 on my windows 7 computer. When i double-click the mozilla icon, it doesn't start. I opened the task manager and noted that the process "firefox.exe" appears and desappear after 5 seconds. I tried to start mozilla in safe mode but the problem remains. The only way to use mozilla in my computer is restarting the windows in safe-mode. Last thing: i already tried to reinstall the program. Please help me!

I'm also using Windows 7 on a Lenovo U310 laptop.

W701ds doesn't start

A tricky case:
I've just replaced the main screen from the W701ds, and when I try to start the laptop, it doesn't start.
Just the led power light for two seconds but it doesn't go into the BIOS and dies. The screen always in black.
If I try to restart the laptop with the I/O button, it doesn't work at all (dead), not even the power lights.
To try to "enable", I have to remove the battery and unplug the cord from the AC power. Then, the cycle repeats... the led power light for two seconds but it doesn't go into the BIOS and dies.
Anyone with a similar problem?
Thank you

Sorry to hear about all the problems you're having with that laptop, fjdiazal. The current problem sounds like the power supply is being overloaded, or the power supply or cable is bad, or you have a static electricity problem, or perhaps CMOS is scrambled. Make sure that all peripherals are disconnected from the laptop. I don't know whether there are any fuses in the machine that would apply to this problem.
So it could be a number of things, but here's something that's simple to try:
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Laptop-won-t-boot-and-can-t-even-get-into-BIOS...
If the battery is in good condition and fully charged, and the machine still won't boot when connected to battery only, then that rules out the power supply.
If you search for:
laptop won't start
within the forum, you'll find a number of other suggestions to try, plus other users will probably chime in with their own suggestions. We have a lot of users here who are very good at diagnosing these types of problems. This is about the time when lead_org shows up in the forum from Australia, so he might have some suggestions.
Another thing to try is to reinstall the old display. You might also look for damage to the display cable or connector. Hopefully, you're using proper anti-static procedures when changing displays. Also, if you've worked on the fans in any way, make sure that their cables are still connected, otherwise the fans won't spin up and many laptops will do exactly what you're describing.
Anyway, best of luck.
P.S. - Once you press the laptop's power button to turn it on, within two seconds, BOTH fans should turn on at least briefly. At least, that is what happens with my W700, which is very similar to your W701ds. This can be hard to detect, so I tore off two 6-inch-long half-inch-wide pieces of Kleenex tissue, and draped a piece over the edge of the laptop and in front of each exhaust vent, and you can see the tissue being blown by the fan being turned on:
If EITHER fan does NOT turn on, then the machine will exhibit the exact behavior that you're describing.
So, a fan that HAS FAILED can cause exactly what you're seeing.
And a fan that is in the PROCESS OF FAILING can cause exactly the crashing behavior you described earlier.
So it's possible that a dying fan could cause BOTH of the problems that you have observed. Note that the LEFT fan is the CPU fan, and the RIGHT fan is the GPU fan.

Windows 7 auf dem Lenovo B50-30

Guten Tag. Nachdem ich mir kürzlich ein Yoga Pro 3 gekauft habe und mich mit Windows 8.1 so gar nicht anfreunden kann, habe ich mir noch dieses große "Sparbrötchen" Lenovo B50-30 gekauft. Das wird ebenfalls mit Windows 8.1 ausgeliefert, aber ich hatte gesehen, daß es dafür Windows 7-Treiber gibt. Sicher nicht grundlos. Tatsächlich konnte ich Windows 7 Home Premium 64bit mittlerweile installieren, und es läuft recht rund. Aber ein paar Geräte werden mir im Gerätemanager noch als "Unbekannt" angezeigt. Da das B50-30 derzeit recht günstig angeboten wird, hoffe ich, daß vielleicht noch andere mit diesen Problemen zu kämpfen haben. Wo gibt es die restlichen Treiber, die ich noch benötige?

Die Fehlermeldung hatte ich nicht. Ich bin allerdings so vorgegangen, wie in den Artikeln, die ich mir aus dem Netz kopiert habe. Und wenn gar nichts hilft: Festplatte ausbauen (geht total easy), in ein externes Gehäuse packen, an einen anderen PC anschliessen und von dort aus Partitionen löschen. Aber erstmal folgendes machen: Re: B50-30 problem with install windows 7Options‎10-03-2014 03:38 AM1. In BIOS select exit menu2. Load DEFAULT SETTINGS3. Find OS optimized defaults, make sure OTHER OS is selected!4. Select Boot option menu5.Make sure BOOT FROM LEGACY is enabled6. REORDER BOOT DEVICES INSTALLING WINDOWS 7 IIF YO CANNOT INSTALL WINDOWS (Windows cannot be installed to this disk. The selected disk is of GPT partition style). FOLLOW THIS TUTORIAL https://www.youtube.com/watch?v=DQf9YqbD8WI The solution is this.... I bet you are Getting the ACPI Error like this... Link to image Step 1: Shut down your Laptop. Step 2: Find the small NOVO button on Left side of your Laptop near the Power cord Point. Press the button. The System loads Boot Options.. Step 3: Click on the BIOs Setup Option. A Blue screen menu appears use arrow keys to navigate to Exit option and select OS optimized Defaults to Win 7 ( The Default is Windows 8 64 Bit) Step 4: If you are about to Install a Fresh Copy of Windows 7 Then Goto Configuration Tab and Change USB Mode to USB 2.0 (Original may be USB 3.0) In case you are already Running Windows 7 and the Problem was caused by Updating Your BIOS then Then rest the Bios by using the option given in the Status Bar. Step 5: Goto Exit and Select Exit Saving Changes. Select Yes The problem should be gone.. and if It doesnt... Be Patient. Open BIOS Settings again and tweak around... Boot Mode or Boot Priority etc. * Please refre to this Document -http://download.lenovo.com/consumer/hnt/lenovo_g40_30_g50_30_bsod_solution.pdf Hier: https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Windows-7-install-on-Lenovo-B50-30/td-p/1654059 To Install Windows 7:
1 Run BIOS by pressing Novo button
2.Go to Exit menu
3. Make sure that OS Optimized Defaults is set to "Other OS". If not - select it
4. Select Load Default setting above OS Optimized Defaults and confirm loading.
5. Set Boot Mode to "Legasy Support" in Boot menu. Boot Priority could be set to "Legacy First" as well.
6. Go to Exit and Exit Saving Changes
7. Press Fn+F12 during Lenovo Logo to select boot source, then select your ODD (or USB) with Windows 7 Instalation disc.
8. Press any key to start Windows 7 Instalation wizard.
Now you can install Windows 7 including setting up new HDD partition(s) inside Windows 7 standard installation Wizard,

Lenovo U350, can not start any programs at some point

Hi experts,
I ran again into some problems with my Lenovo U350 under Windows 7.
All of a sudden, I can not start any program on my laptop after running it for a while. I click on the program I can see this program running in Task Manager but it does not show up on the screen.
Also I can not restart my laptop normally by clicking either on buttons "Restart" or "Shut down" either. For some reason these buttons/commands stop working. The only way to deal with this problem is a hard shut down by holding the "Power On/Off" button pressed on the laptop for a few seconds.
I ran the antivirus check on my laptop to find existing viruses but came out with the result of 0 viruses.
I wonder why the programs on my laptop stop loading or freezing? Any ideas?
I'm that close to reinstall the whole system with the OKR.
Thanks for your replies in advance.
Cheers,
Randy.
Solved!
Go to Solution.

yigit, thanks a lot for your reply.
I tried to reinstall Windows on the weekend using the OKR. The problem was that I could start OKR under Windows 7 and choose the clean OS installation. Then my laptop restarts and I expected that reinstallation procedure would start next. But in reality what I have is just a normal Windows 7 Start. I also tried to start OKR by pressing an OKR button while my laptop is switched off. But same result - just a normal Windows 7 Start. Apparently, the OKR files are corrupted somehow.
I have to mention 2 facts:
1) I didn't change the partitions on my drive. These are the default factory partitions.
2) Unfortunately, I didn't create the recovery discs when I bought my laptop.
The question is how I can reinstall my system then? May I ask Lenovo for some recovery discs to ship to me if I still have a warranty?
Thanks in advance for your future replies.
Randy.
P.S. yigit, I checked your mentioned thread. The problem is I don't receive any Windows message saying why it can't start programs. It just doesn't start without any error message that should come along with it.

Recently my phone updated itself to ios 7, it wont let me sign into my iphone app store to download apps,i click on an app i want it just clicks but doesn't start to download any help?

recently my phone updated to ios 7, it wont let me sign into my iphone app store to download apps,i click on an app i want and it just clicks but doesn't start to download, i can see thats its not signed in so i tried to re set up my account under the app store in settings , but its just a grey area and wont let me click to input any information. this happened right after i updated my phone, any help?

Hi SarahHannah,
If you are having trouble activating iMessage, this article contains relevant troubleshooting steps:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Take care,
- Ari

SAP NETWEAVER COMPOSITION ENVIRONMENT 7.1 EHP1 - System doesn't start

Hello, 
 
after i get the message the installation was succesfully and i start the server the proces jstart.exe 
 
doesn't start completely. 
 
in the trace file dev_jstart in find this error message: 
 
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE 
F arg[ 1] = -nodeId=1000 
F arg[ 2] = pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_sjodevb1 
F arg[ 3] = -DSAPINFO=CE1_00_collector 
F arg[ 4] = -hostvm 
F arg[ 5] = -nodeName=collector 
F arg[ 6] = -file=D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties 
F arg[ 7] = -jvmFile=D:\usr\sap\CE1\J00\work\jstart.jvm 
F arg[ 8] = -traceFile=D:\usr\sap\CE1\J00\work\dev_collector 
F arg[ 9] = -javaOutFile=D:\usr\sap\CE1\J00\work\jvm_collector.out 
F arg[10] = -clusterId=bootstrap 
F arg[11] = -exitcode 
F arg[12] = 503 
 
an in the tracefile log_bootstrap.0 this error message: 
 
[Nov 19, 2009 5:17:50 PM ] Exception of type com.sap.sql.log.OpenSQLException caught: Could not load class com.sap.dbtech.jdbc.DriverSapDB with class loader com.sap.engine.offline.FileClassLoader@6caf16..
[EXCEPTION]
com.sap.sql.log.OpenSQLException: Could not load class com.sap.dbtech.jdbc.DriverSapDB with class loader com.sap.engine.offline.FileClassLoader@6caf16.
 at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:104)
 at com.sap.sql.connect.factory.VendorConnectionFactory.createInstance(VendorConnectionFactory.java:210)
 at com.sap.sql.connect.factory.VendorConnectionFactory.createVendorDriver(VendorConnectionFactory.java:43)
 at com.sap.sql.connect.factory.DriverPooledConnectionFactory.<init>(DriverPooledConnectionFactory.java:31)
 at com.sap.sql.connect.datasource.DataSourceManager.createPooledConnectionFactory(DataSourceManager.java:546)
 at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:505)
 at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:136)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.getDataSource(OpenSQLDataSourceImpl.java:272)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:208)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:357)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:157)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
 at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:127)
 at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:262)
 at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:39)
 at com.sap.engine.bootstrap.HelperImpl.getConfigurationHandlerFactory(HelperImpl.java:38)
 at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:111)
 at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:74)
 at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:229)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: java.lang.ClassNotFoundException: com.sap.dbtech.jdbc.DriverSapDB
 at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:909)
 at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:800)
 at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:748)
 at com.sap.sql.connect.factory.VendorConnectionFactory.createInstance(VendorConnectionFactory.java:206)
 ... 22 more
 
 
any idea? 
 
 
thank you for your help 
thomas 

Hi Angie,
You will find the needed information here - http://service.sap.com/~form/handler?_EVENT=DISP_NEW&_APP=00200682500000001303&00200682500000002804=01200615320900001418
Release to Customer Available 09.05.2007
Default Release Available 14.12.2007
Good Luck!!!
GLM

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
Marcelo

If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac

Chromium doesn't start and suspend, shutdown don't work occassionally

Hello,
I have this problem on my laptop but since chromium doesn't start on my desktop either, I don't think it's specific to laptops.
When I try to start chromium in a terminal, I get a blank window (I can tell because I use spectrwm):
ATTENTION: default value of option force_s3tc_enable overridden by environment.
[25148:25148:0215/130205:ERROR:background_mode_manager_aura.cc(14)] Not implemented reached in virtual void BackgroundModeManager::EnableLaunchOnStartup(bool)
I temporarily resorted to using Firefox instead, but at times it just freezes up while opening some pages. After that point, even killing firefox doesn't help: the system load level keeps on rising. I used pidof to check if firefox is still running, but I had no output from pidof. After having firefox to freeze, shutdown, suspend, etc don't work. The laptop goes to a black screen state, but the power LED remains on indefinitely.
These might be two separate issues, but they started together on my laptop.
Thanks in advance!
Last edited by SgrA (2015-02-15 09:47:08)

I also have issues wich starting up chromium (google-chrome and opera too).
Feb 15 10:09:58 localhost kernel: [ 102.301038] chromium[786]: segfault at 7ffffd294ff8 ip 00007fb4386962b2 sp 00007ffffd295000 error 6 in chromium[7fb43371e000+66c6000]
Feb 15 10:12:16 localhost kernel: [ 240.102784] chromium D 0000000000000000 0 786 1 0x00000104
Feb 15 10:12:16 localhost kernel: [ 240.102789] ffff8800c2d5bb68 0000000000000082 ffff8800c5635a90 0000000000013640
Feb 15 10:12:16 localhost kernel: [ 240.102793] ffff8800c2d5bfd8 0000000000013640 ffffffff81818540 ffff8800c5635a90
Feb 15 10:12:16 localhost kernel: [ 240.102796] ffff8800c2d5bb78 0000000000000246 ffffffff81a52047 ffff88042f5eeb08
Feb 15 10:12:16 localhost kernel: [ 240.102799] Call Trace:
Feb 15 10:12:16 localhost kernel: [ 240.102809] [<ffffffff8109e777>] ? try_to_wake_up+0x1e7/0x380
Feb 15 10:12:16 localhost kernel: [ 240.102814] [<ffffffff81551599>] schedule+0x29/0x70
Feb 15 10:12:16 localhost kernel: [ 240.102818] [<ffffffff81553e25>] rwsem_down_write_failed+0x175/0x360
Feb 15 10:12:16 localhost kernel: [ 240.102823] [<ffffffff812c0e63>] call_rwsem_down_write_failed+0x13/0x20
Feb 15 10:12:16 localhost kernel: [ 240.102827] [<ffffffff81553604>] ? down_write+0x24/0x40
Feb 15 10:12:16 localhost kernel: [ 240.102832] [<ffffffff8122c5cd>] do_coredump+0x16d/0xf30
Feb 15 10:12:16 localhost kernel: [ 240.102837] [<ffffffff81080524>] ? force_sig_info+0xd4/0xf0
Feb 15 10:12:16 localhost kernel: [ 240.102841] [<ffffffff8107e3d7>] ? __sigqueue_free.part.15+0x37/0x40
Feb 15 10:12:16 localhost kernel: [ 240.102846] [<ffffffff8108180c>] get_signal+0x38c/0x710
Feb 15 10:12:16 localhost kernel: [ 240.102852] [<ffffffff81014617>] do_signal+0x37/0x800
Feb 15 10:12:16 localhost kernel: [ 240.102855] [<ffffffff81550f08>] ? __schedule+0x3e8/0xa50
Feb 15 10:12:16 localhost kernel: [ 240.102859] [<ffffffff81014e48>] do_notify_resume+0x68/0xa0
Feb 15 10:12:16 localhost kernel: [ 240.102863] [<ffffffff81556322>] retint_signal+0x48/0x86
Feb 15 10:12:16 localhost kernel: [ 240.102871] Watchdog D 0000000000000004 0 794 1 0x00000104
Feb 15 10:12:16 localhost kernel: [ 240.102874] ffff880402757d40 0000000000000082 ffff8800c5632840 0000000000013640
Feb 15 10:12:16 localhost kernel: [ 240.102877] ffff880402757fd8 0000000000013640 ffff880418841420 ffff8800c5632840
Feb 15 10:12:16 localhost kernel: [ 240.102880] ffff880402757ce8 ffff880402757e70 00000000ffffff92 ffff880402757c98
Feb 15 10:12:16 localhost kernel: [ 240.102883] Call Trace:
Feb 15 10:12:16 localhost kernel: [ 240.102888] [<ffffffff810dbe32>] ? hrtimer_cancel+0x22/0x30
Feb 15 10:12:16 localhost kernel: [ 240.102893] [<ffffffff810ed4e6>] ? futex_wait+0x206/0x280
Feb 15 10:12:16 localhost kernel: [ 240.102897] [<ffffffff810dbbc0>] ? __run_hrtimer+0x250/0x250
Feb 15 10:12:16 localhost kernel: [ 240.102900] [<ffffffff81551599>] schedule+0x29/0x70
Feb 15 10:12:16 localhost kernel: [ 240.102903] [<ffffffff81553c65>] rwsem_down_read_failed+0xe5/0x130
Feb 15 10:12:16 localhost kernel: [ 240.102906] [<ffffffff810ed0d0>] ? futex_wake+0x80/0x160
Feb 15 10:12:16 localhost kernel: [ 240.102910] [<ffffffff812c0e34>] call_rwsem_down_read_failed+0x14/0x30
Feb 15 10:12:16 localhost kernel: [ 240.102913] [<ffffffff815535d7>] ? down_read+0x17/0x20
Feb 15 10:12:16 localhost kernel: [ 240.102918] [<ffffffff81060aed>] __do_page_fault+0x1ed/0x600
Feb 15 10:12:16 localhost kernel: [ 240.102923] [<ffffffff8110e7f9>] ? seccomp_phase1+0x99/0x210
Feb 15 10:12:16 localhost kernel: [ 240.102927] [<ffffffff81060f22>] do_page_fault+0x22/0x30
Feb 15 10:12:16 localhost kernel: [ 240.102930] [<ffffffff81557598>] page_fault+0x28/0x30
Feb 15 10:12:43 localhost kernel: [ 267.288947] chromium[920]: segfault at 7fff3faceff8 ip 00007fa90fcc62bc sp 00007fff3facf000 error 6 in chromium[7fa90ad4e000+66c6000]
It started happening after upgrade:
[2015-02-15 09:43] [ALPM] upgraded chromium (40.0.2214.94-1 -> 40.0.2214.111-1)
I was wondering if it has anything to do with some X-related upgrades:
[2015-02-15 09:42] [ALPM] upgraded xorg-server-common (1.16.3-2 -> 1.16.4-1)
[2015-02-15 09:43] [ALPM] upgraded xorg-server (1.16.3-2 -> 1.16.4-1)
[2015-02-15 09:48] [ALPM] upgraded xorg-server-devel (1.16.3-2 -> 1.16.4-1)
[2015-02-15 09:45] [ALPM] upgraded nvidia (346.35-5 -> 346.35-6)
I tried to downgrade chromimu to 40.0.2214.94-1 and it didn't help. I tried to downgrade nvidia, xorg-server and xorg-server-devel to previous versions, when everything worked and X chouldn't start.
Other observations are that if I start chromium, the ps command hangs and I have to reboot the system to be able to use ps command again.
Linux lisa 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64 GNU/Linux
It's worth mentioning that I also run spectrwm, like SgrA, however i don't have other issues with freezing on shutdown etc.

Remote Update Manager on Yosemite doesn't start

Hi to all, I have recently updated my 15 iMac (year 2012) to Yosemite.
After the upgrade, the Adobe Remote Update Manager tool doesn't start, with an error 1.
In the console, I see these lines:
Any suggestions?
Many thanks

Same problem here on my wife's mid-2012 Macbook Air. Really annoying.

Apple logo comes up but ipod doesn't start

When I turn on the device the Apple logo comes up but the ipod doesn't start and go to the menus it just stays with the logo. When I hold down the play/pause on the click wheel to put it to sleep a symbol of a triangle with an exclamation point in the center comes up along with "www.apple.com/support/ipod." I tried rebooting it with Menu/select but nothing happens.

Unfortunately, on a "classic" iPod that uses a hard drive for storage, the most likely cause is a faulty hard drive.
You can try putting the iPod into Disk Mode
http://support.apple.com/kb/HT1363
If that works, connect it to the computer and run iTunes. iTunes may prompt you to do a Restore. This will erase the iPod, re-install its software, and set it to default settings. If the cause is data corruption or a software issue (and the hard drive has no physical problem), the Restore should fix it.

Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

Update firefox, it asked me to update flash, I tried to update flash but it said I had to close firefox. A box came up and said the Flash install would continue when I closed firefox. I closed all firefox windows and no update of flash occurred. I tried relaunching firefox but got the "Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." message. I rebooted the system, no improvement. I tried to run firefox as administrator and got the same message. Either I find a fix or I won't be able to use firefox and will have to go back to ie.

-> press '''CTRL''' + '''SHIFT''' + '''ESC''' to Open Task Manager -> Processes tab -> right-click '''firefox.exe''' and click '''End Process Tree''' -> close Task Manager
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Troubleshooting plugins
* https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
Check and tell if its working.

RT app doesn't start on power-up or re-boot

Hi Again, Gang:
This one is stumping me. I've finished a cRIO application, and am now in the process of getting it ready for distribution. The RT part of the app runs fine when I upload it from the host PC. When I set the app to run at startup from NV RAM, it doesn't run. Well, actually, to make matters worse--it DID run ONCE! This morning I powered the cRIO, then did other things for a while. I later looked at the unit and saw the user LED was flashing the sequence that says it's working.
I've read through the troubleshooting stuff on the web site. I've FTPd into the box and it looks like it's set up right. The dip switches are all off. I've waited for 10 mins to see if comes up after a while. I've experimented with the FPGA upload settings to see if that's the issue. (The RT won't get very far if the FPGA doesn't start) Is it possible that something with the shared variable engine is holding it up?
I'm about out of ideas. I really hope that someone can give me some!
Thanks in advance!
Roger

hi!!
Have you got any solutions. it seems there some bugs in lv2010. we are facing similar problems. some times every thing works but after restart it shows some error(blinking of yellow LED on RT).some time variable are not being published .i am working with mutltiple target in a single project. i have tried all options like auto deploy variable(ON/OFF)
seperate libraries for each target eventhough applications is similar for all targets. Just shareing my experience(pain)
Regards
Nageswar

Satellite L300D- Sometimes it takes ages to start up or doesn't start

Anyone able to help me?
Sometimes it takes me ages to start up my laptop and sometimes it doesn't start up at all and I get sent to the start up repair screen and that results in an unable to repair press ok to turn off computer message. When ever I do manage to start the laptop programs always stop responding with some responds lasting around an hour.
I have used the recovery discs I made when I was told to do so, the first time using the labtop about 5 times so far. Every time I restored the system it work fine for about 1 hour until I had to install the Windows updates.
Anyone able to help me on this problem of mine?

Hi
Well buddy, thats really strange and I think at the moment its not easy to say what the reason is for this.
Normally I would suggest you should reset the notebook back to factory settings using the Toshiba recovery disk but you have already tried. But the interesting thing is that you wrote that it works for one hour and you have to install Windows updates. Does the Windows updates causing this problem?
What happens if you dont make the Windows updates? Does it work?
Maybe the updates are causing an incompatibility issue if you have also installed 3rd party software.
In worst case its a hardware malfunction and your notebook should be checked from a notebook technician.
In my opinion it could be a problem of the HDD too. But HDD can be checked yourself with Drive Fitness Test for example.

Lenovo b50 doesn`t start

Similar Messages

Maybe you are looking for