Lenovo B590 big problem, HELP!!!
Hello,
I have big problem with my Lenovo B590 20206 laptop. [windows 7 pro 64 bit installed]
After turn my laptop to standby mode (manualy or after 1 hour without use laptop) and when I want to wake up laptop all what I see is black screen and I must hold push power button for 5 second to force off.
BTW when laptop is in standby mode everything looks good, led is blinking and after pushing any button I hear that fan and hard disk is starting but all what i got is black screen, even CTRL + ALT + DEL doesnt work.
I've tried replace RAM, reinstalled alot of drivers but without success. Windows 7 of course works perfect, only sleep mode (standby] doesnt work.
Another problem is that i cant update bios, my current is 1.10 which is not recent imho (maybe bios update would help with problem above?). Ive downloaded BIOS Update Utility for Windows 7 from lenovo site but when i tried to update i ve got a warning like this:
so i tried to update from Windows 7 and BIOS Update Utility for CD ISO image and i got error "THE SYSTEM PROGRAM FILE IS DAMAGED. THE PROCESS HAS BEEN CANCELED."
My last question is about disk replacement in that lenovo b590, original 500gb disk is 7mm high, can I replace it with 9,5mm disk?
Any help would be appreciated, sorry for my english btw.
hi feeling,
Welcome to Lenovo Community Forums!
About the sleep Issue
Can you try the solution on this article
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/u310-touch-Wakes-from-sleep-then-goes-back-...
About the BIOs Update can you check and share what it says under your Bios with regards to the version installed
Let me know your findings
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
Z87 msi mpower big problem help me please auto turn off and never boot
i had bought msi z87 mpower from amazon 2 weeks ago while trying to open it, it just turn on and leds light up but no beep/ no display= no signal , i tried to take it out of case the same problem tried it with 1 stick of ram g-skill 1600 mhz 4g same problem i removed the vga card same problem i removed the ram , the motherboard didn't recognize it and power on led on but no beep nothing debug led all the time 00 , with cpu i5 4690k only some people told me , mobo didn't recognize the cpu because it's haswell refresh need update for bios , but how when i can't see any screen and it can't even boot just fan spin and leds light up nothing else , i sent it to some msi technical support in egypt to try to make bios for it , he told me he could bot it and update it from windows normally without any problem and he sent it back to me , while i took it to try at my home with my cpu the same problem motherboard didn't recognize my cpu , i had connected everything and as well wifi card with the pin and the 4 kits of 16 giga ram trying to power on same problem i did 1 restart and the motherboard never turns on again like dead
i get it out the case and removed everything except wifi card same problem no power i just removed the wifi card it turns on for 1 second the turn off automatically i connect it again, and mobo don't turn on again i just release this pin of wifi card out of mobo the leds turn on like if the pin of wifi card shorting the motherboard i don't know why i removed it at all and try to turn on the motherboard light up and fans works for 1 sec then turn off automatically like the motherboard shut down it self for safety i try to connect the vga card only with 1 ram and cpu but the motherboard don't turn on at all , so motherboard only turn on now with 1 ram and cpu just turn on for 1 sec and then off if i connect anything more it will not turn on at all same problem with other power supply i sent it back to technical shop they said it's just bios corrupted and nothing bad but they told me they can't make it because bios files on msi site doesn't work for some reason and they want to give me it back like that turn on/ off immediately what could i do , did they make something bad when i sent it to them at start because it was turn on normally and when i try it just 1 restart and full fail to power after that and they admit , they had work through it to windows and make normal bios update so what would be the issue , i feel like if wifi card made some short to the motherboard with it's pin or the bios failed ot recognize wifi card and failed after 1 restart i don't know where to start or what to do psu good cpu good ram is good tested what could make some motherboard no turn on , as well i have removed the battery for 5 minutes and try with it and i made clear cmos button still same and they said they didn't touch motherboard while making bios
help me please
pc spec:
cpu i5 4690k
mobo msi z87 mpower
ram g-skill 1600 4giga
vga zotac gtx 970 amp extreme edition OC
psu seasonic 600 watt eco
case corsair spec 03 gammingQuote from: bassam.mohamed20 on 13-April-15, 02:46:28
okay tomorrow i will try another processor chip but what if doesn't work , same here i suspect it's bios so what could let some motherboard turn on and off immediately?
Bad CPU? bad Motherboard? Other stuff.
The only way to know is testing parts.
You said it already worked with another CPU. Did you check CPU socket pins? -
Hello MSI gaming forum
Motherboard: Z87-G45
I am posting on this forum because my main pc has been effected and i cant do my course work. I turn on my pc and everything seems to be running. But on my display it says no signal. i've tried taking out the graphics car and using the integrated graphics and that didn't work. Tried taking my ram out and that didn't work. The hard drives sound like they are being read but there but my HDD Light on my case doesn't flash like it did before. And the on button one the case is supposed to tight up but now it isn't. I've tried resetting the CMOS but i cant even boot up into the bios because my display says "no signal".
Literally was working one day and then the next day it just didn't display anything.
Please can someone help me out because i have no clue what is wrong with my pc and struggling to do my coursework and now maybe falling behind on my work.Quote from: reissjanda on 04-February-15, 22:31:23
Thanks for replying, I've done what you have said but it's hasn't worked, the fans still spin but again says no signal
So that means even using the integrated video on the motherboard (no video card installed) produced anything on the screen?
At this point, it can only be 2 things. Motherboard or CPU. Hard to say which it is without having something to swap into the system and find out. -
Stupid Question but BIG problem - Help!
I recently transferred all my music files from an external USB drive to my new internal hard drive. Now when I launch iTunes, it can't find find my music. I've tried consolidating the library but its no use. Maybe I'm doing it wrong? If I click on a song it asks me to find it myself, which is easy but I have over 700 albums in there! What <edited by host> have I done! Please help!!
Glad to help both of you!
H a p p y H o l i d a y s ! -
Since upgrading to a MSI K8N Neo Platinum nForce3 250 (Socket 754) and a A64 3000..the rest of my system is in sig
i didnt think it was running that fast..and when i did a benchmark with 3d mark 01 it showed up with 17700...and that was with the gfx card overclcoked
i tried messing about with memory timings and overclocking the rig a bit but was still far from impressed....anyway
i bought a new heatsink/fan and a raptor grive to use for my O/S after i had put it all together and switched on the comp it just didnt boot ....all i got was one longish beep the a pause followed by another and so on .
i tried reseating the cpu and heatsink tried the memory in different slots checked gfx card etc still nothing...
anyway i went back to my n/force 2 and barton 2500@3200 with the same memory and gfx card i used on the A64 and it works fine....i benchmarked it with 3d mark 01 and got a score of about 16700...without the gfx card overclocked.....
so have i got a borked mobo or borked chip the new system should be a lot faster than a barton 2500..can anyone tell me what the beep means off this mobo....
cheers in advance for any replies BramYou can find BIOS beep codes at: http://bioscentral.com/beepcodes/awardbeep.htm
It's not clear to me whether any of those apply to you...are you having a repeating long beep or is it long then short?
Does your CPU fan appear to be running at its full speed? Did you make sure to clean off the old thermal compound fully? Is the new thermal compound applied properly? (don't use too much!)
Have you tried clearing the CMOS? Unplug, and remove the battery for a minute or two. Try also to startup with nothing connected but the CPU, graphics card, and 1 stick of RAM. Before anyone else says it, as it seems to be the answer to end all answers for any problems in this forum, what is your power supply rated at? Not just watts but each rail...for example my PSU: 3.3v 30A 5v 38a 12V1 18A 12v2 15A
Finally, you're not going to see much of an increase in 3dMark tests just because you're on a faster CPU. It's almost completely based off your graphics card. I have a 9800PRO that tests at about 2% faster going from 200mhz to 220mhz for example on my A64 3200+.
Just some general ideas to try based on my recent experiences...in the last month or so I've built 3 PCs, 2 for relatives and 1 for myself. I think about every problem you can have I encountered but it was a great learning experience and a lot of fun! -
Hi,
My question is,
How to make a jar file or an executable file for swing programs,
please help me.
Thanks a lot.
Mr.John...You just use the jar tool that comes with your sdk and to make it self-running u simply place i line like:
Main-Class: yourclassname
but don't add a .class extension to your main class name
also, for more information on using the jar tool go to:
http://java.sun.com/j2se/1.4.2/docs/tooldocs/solaris/jar.html
if your using solaris or linux
or
http://java.sun.com/j2se/1.4.2/docs/tooldocs/windows/jar.html
if your using windows -
BONSOIR J'AI UN PREBLEME AVEC MON ORDINATEUR L'ENOVO B590 JE NE PEUX PAS VOUS EXPLIQUEZ MAIS JE VOUS ENVOYE CE QU'IL AFFICHE SUR L'ECRAN
Admin edit; translation; (translate.google.com)
Good evening, I have a problem with my Lenovo B590 computer. I cannot explain the problem to you but have included a screen shotHi teriero,
Welcome and Thanks for posting in the Lenovo Community,
I’d like to ask you to share with us your windows version to help you with the issue that you’re requesting.
Thanks and Best Regards,
Soha
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Lenovo B560 Battery problem! Need help asap
Hi, I have a big problem with my Lenovo B560.
Recently I started noticing the charging icon in the bottom right corner of the screen would go briefly from "charging" to the icon for "not plugged" (just the battery). If I moved the power cord a bit it would go back to normal.
Days later it happened again but this time a little more persistent. I didn't give it much attention. And then suddenly, last weekend it stopped charging altogether, despite being plugged. I tried different power sources, I tried moving the cable around, nothing. With the little time I had left before it completely discharged, I googled the problem and saw somebody in a thread saying "it's likely tha battery, it needs replacement", which made sense to me, since my laptop is 3-years old.
I ordered a replacement battery and waited. Today it arrived and I put it in, eager to use my computer and have everything going back to normal. I turned on the computer, battery was at 50% but it still did not charge. It showed the battery icon like before, as if it weren't plugged in. I moved the cable around again and noticed it would briefly flash back to being plugged. And then it stabilized on "plugged in, not charging" but it was suddenly at 3%. However, at least it didn't go down this time.
I tried reinstalling the Power Management Driver, restarted, everything was the same. Then I went to Device Management, I disabled the Driver and the icon dissapeared. Restarted, reinstalled driver once more, icon was still gone.
Then I noticed in another thread somebody recommended taking out the battery and turning on the computer with just the power cord plugged in. So I took out the new battery and turned it on with just the power cord. And it worked, and that brings us to the present moment. Both batteries sit next to me and my computer is currently working simply on the power that is supplied by the power cord.
Can anyone please tell me how to get out of this mess? My job relies greatly on this computer working, and I need to fix it asap. Any kind of advice is welcome. Thank you!Update: the computer will not turn on anymore, not even with just the AC cord and no battery. Please help.
-
BIG PROBLEM with Lenovo A320 wifi - extremly slow
Hello Lenovo community,
I have a big problem with my lenovo A320 all in one.
The wifi connection is extremly slow. I have 3 differen devices at the same place one macbook, one phone and my lenovo a 320 connectet to the same wifi. The macbook and phone get about 50mpbs but my lenovo gets only about 0.3 to 2 mbps. I have tested it wit different networks and differnet routers but is always very very slow.
When connected via LAN works fast and well but via wifi its useless.
I have the intel core I3 and Broadcom 802.11n with the newest drviers.
I have tried everything possible but nowthing helped.
Can you please help me with any solution ?
Thank you in forwardThats great news for you.. it probally is a defect on my phone, I purchased it new from apple and tommorrow its going in for service..
I have seen others with similar issues, must be a bacth, I even heard that there are 2 wifi antenas that were used on them, one of them gives problems the other not...
Just a shame, its a great phone
thanks for all the feedback -
Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer? -
I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.
Go to Settings > Privacy > Location Services.
Turn off SnapChat.
Go to Settings > Notification Center
Turn off SnapChat.
Restart the device.
Go to Settings > Privacy > Location Services.
Turn on SnapChat.
Go to Settings > Notification Center
Turn on SnapChat.
Test the issue. -
Hi There
Am having a big problem updating my iphone 4 Apps, due to a problem with my password for my apple id. But it seems that i have two different ids, one for the updates and another for the downloads. I am not able to retrieve my Id password for updating my Apps. Can you help me ps?
Thank youWhat program did you use to fix the internal hard drive? What repairs did it report making? More crucially, if repairs were reported, did you re-run the utility until it reported no problems found? It's possible for one set of problems with a drive to mask others.
If you have about 5GB or so free space on the internal hard drive, you can use your OS X Install disc to perform an Archive and Install to recover from the failed Software Update. When the computer restarts, download and run the OS X Update Combo 10.4.11 (Universal). When the Mac restarts after that, run Software Update. During all this, make sure nothing interrupts or shuts down the Mac! Note that the first start after each of these updates will take significantly longer than subsequent starts, so be very patient.
How did you back up your internal drive to the external one? Did you just drag things over in the Finder, or did you use a utility such as SuperDuper! or CarbonCopyCloner? Does the external HD show up as a bootable volume in System Preferences > Startup Disk, or using Startup Manager? -
Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?
when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message? -
Problema para arrancar lenovo b590 (UNMOUNTABLE_BOOT_VOLUME)
Hola a tod@s,
de buenas a primeras, mi lenovo b590 no arranca, ayer funcionaba perfectamente, y hoy al intentar iniciar me ha salido un error de un "servicio" que apenas me ha dado tiempo a leer cuando se a reiniciado el portatil. Tras esto al intentar arrancar el sistema operativo el lenovo se quedaba colgado apareciendome la pantalla azul de la muerte con el siguiente mensaje: "UNMOUNTABLE_BOOT_VOLUME" (windows 8.1)
Tras esto el PC se ha quedado pegado (ya van 6horas) en la pantalla de "Intentando realizar reparaciones".
He buscado información sobre el tema pero no veo nada que se asemeje a mi caso, ya que la verdad, ni siquiere se porque aparece este error de la nada, tengo miedo de perder datos importantes ya que la ultima copia de seguridad la hice hace 1mes. Destacar que estoy de exámenes y necesito el ordenador para realizarlos.
¿Algun usuario de este foro me podría aconsejar sobre este problema o que debería de hacer?
Si conoceis algun hilo de este tema se agradecería que lo compartieseis.
Ante todo, gracias por vuestro tiempo
P.D : no tengo disco de inicio
¡Resuelto!
Ir a solución.Claro puede conseguir la imagen de Windows 8.1.
Usar el recovery es una especie de formateo te deja el ordenador como si fuera la primera vez que lo enciendes, pero te dejaría con Windows 8 y eliminaría todo en C, a través del botón Novo, el proceso de recovery se debe realizar con mas del 50% de carga y conectado al cargador.
Punto anterior en Windows es el que tu has creado puedes volver a el desde el disco de rescate de Windows, desde Windows 8 en adelante también podrías regresar a Windows de fabrica.
Instalación limpia me refiero a una nueva instalación de cero en la que cargas un dispositivo extraible con la instalación de Windows.
Puede ser sobre lo de la descarga esta era un archivo que necesito algún parche?
Entiendo suele suceder el problemas relacionados a mal arranque con Windows.
Inicio seguro sigue disponible solo se debe usar un USB de rescate y realizar ciertos pasos, lo ideal seria utilizarlo no desde Windows si no como esta disponible antes y no como esta configurado a partir de WIndows 8, pero en tu caso no creo que sirviera de mucho.
Sobre la opción de BIOS me puedes comentar que has echo hasta ahora? si se podría entrar pero ver que sucede pero no se mas detalles.
Para cargar algún disco de Windows 8/8.1 presionar F12 o Fn+F12 y escoger tu lectora, para entrar a BIOS a través del botón Novo o F2,Fn+F2 al encender el ordenador.
Esta disponible lo de rescatar tu información con Linux no es complicado y proceder a realizar una nueva instalación.
Te dejo algunos recursos:
Conseguir una imagen de Windows https://forums.lenovo.com/t5/Windows-Base-de-conocimientos/Crear-medios-de-instalaci%C3%B3n-Windows-...
Instalación de cero https://forums.lenovo.com/t5/Windows-Base-de-conocimientos/Instalaci%C3%B3n-de-Windows-8-1-de-cero/t...
Botón Novo https://forums.lenovo.com/t5/ThinkStation-ThinkServer/Bot%C3%B3n-Novo/ta-p/1791535
Un saludo.
@Antony_Vamu
Comunidad en Español English Community Deutsche Community РусскоязычноеСообщество
Mis Lenovo: Y560p,Z580,Z500 touch,S920,T400,G50-70 ,Soy voluntario no trabajo para Lenovo, las opiniones expresadas por mi no representan a Lenovo, no se responde a preguntas de manera privada debes crear un nuevo tema, números del centro de llamada Lenovo Aquí , reglas de participación del foro Aquí , si encontraste solución a tu problema marcarlo aceptándolo como solucionado!!!!! -
i have a big problem why is it i cant update my ipod touch 2g into ios 4! im using the latest version of itunes and everytime i click "update" it stucks on the "contacting server" please help i want to update it now
Maybe here:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Maybe you are looking for
-
Reading Attributes from same context node of different attributes
Hi, I want read Attributes from same context nodes of diifrent attributes. I have attribute A and B of same node, want to get read value from atrribute A into B. Regards, Brahmaji
-
Unable to install update 7.1.1
iPhone 5, model firmware 5.02.00 , version 7.0.4 (11B554a) : A while ago it downloaded update ios 71.1. When on the phone I select Settings->General->SoftwareUpdate- Install Now, it informs me: "verifying update", then "Unable to install update", "An
-
Where can i find this class? com.sap.aii.adapter.axis.modules.HandlerBean
Hi, Which jar file contains the class com.sap.aii.adapter.axis.modules.HandlerBean? Where can i download from? Thank you Monika Dietz
-
i need to use the internet explorer for my citrix client based business system. I cannot log into my business without the Internet Explorer. Where can I purchase this software?
-
Help me! My Iphone won't react at all and is all black. What can I do??