Lenovo e540 High tempreture valies due to high load
Dear support, I would like to report that my lenovo e540 is reaching really high tempreture values. While playing games (HOTS) the laptop reaches around 80-85 C degrees.
Since i had upgraded to Windows 10 Pro I had two freezes on different evenings.
When the laptop reaches high tempretures, the ventilator kinda does not want to go "man" mode and cool up the machine.
I know that that the vent can do more I've heard it when I was updating bios(current v2.19).
On a stress test I managed to reach 95 C degrees! No freeze!
I opened the back cover, there is no dust accumulation on vent or grill. I am using only flat surfaces!.
Please advice how to procceed or is it normal.
Radoslav Miroslavov
Hi rmiroslavov,
Welcome to Lenovo Forums!
You can limit the max CPU ratio via power option,
To do it via the Power Options, right click the battery icon (or electrical plug icon) in the lower left corner of the screen, then...
Select a power plan and then click "Change plan settings"
Click "Change Advanced Power Settings"
Look for "Processor power management" and expand it
Expand "Maximum processor state"
And also request you to update the power management from below given link.
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-edge-laptops/thinkpad-edge-e540/downloads/DS032258
You can now enter the percentage usage of the CPU while the laptop is plugged in.
Please let us know whether the above steps helped you.
Regards,
Naveen.v
Similar Messages
-
Sync messages failed due to high load
Hi!
On our test system we had a very high load of async messages for 3 - 4 hours. The async messages were processed successfully but all sync messages failed during this time frame! As soon as the high load of async messages stopped, the sync messages started executing successfully again.
Has anybody also experienced this kind of problem and what can be done to avoid this issue? Thanks for any input and suggestions.
Regards, Tanjahey Tanja,
i had a similar issue when testing the box with Load runner, that a simple sync scenario fails when the size of payload or attachment is high, the thing that i did is just increased the virtual memory ,
You can also check the trace files to figure out problem ?
This might not be a definitive answer , hope this helps,
Vara
[PLEASE REWARD FOR POSTING] -
Delay, reason due with high load
On MAC OS X 10.9.x when i compiled something(high load ~100%) music was not interrupting (stammer). Now it's will be always? (YOSEMITE)
On MAC OS X 10.9.x when i compiled something(high load ~100%) music was not interrupting (stammer). Now it's will be always? (YOSEMITE)
-
Strange Oracle Behaviour - only month end or high load periods
Hi SAP Gurus
In one of our systems I am expreriencing a strange behaviour from Oracle, in that it seems to be in reconnect, but yet it is not, it resets and carries on but do produce Dump and SM21 log messages, the dump is not really helpfull as it is the same dump but with different program everytime.
I have looked in oracle alert log and found no event tying back to the SM21 log message or dump.
The following is what I found in the developer trace of one of these insident, but there are many, about 125 - 200 for the day during high load:
Fri Nov 28 10:05:55 2008
C *** ERROR => Failed to register application info: orc=3113
[dboci.c 3042]
C *** ERROR => Error 3114 in stmt_fetch()
[dbsloci.c 13001]
C *** ERROR => ORA-3114 occurred when executing SQL statement (parse error offset=0)
[dbsloci.c 13002]
C sc_p=045B18B4,no=29,idc_p=00000000,con=0,act=1,slen=1291,smax=1536,#vars=4,stmt=34DA78C8,table=CATSDB
C SELECT "MANDT" , "COUNTER" , "PERNR" , "WORKDATE" , "SKOSTL" , "LSTAR" , "SEBELN" , "SEBELP" , "SPRZ\
C NR" , "LSTNR" , "RKOSTL" , "RPROJ" , "RAUFNR" , "RNPLNR" , "RAUFPL" , "RAPLZL" , "RKDAUF" , "RKDPOS"\
C , "RKSTR" , "RPRZNR" , "PAOBJNR" , "FUND" , "FUNC_AREA" , "GRANT_NBR" , "S_FUND" , "S_FUNC_AREA" , \
C "S_GRANT_NBR" , "AWART" , "LGART" , "KAPID" , "SPLIT" , "REINR" , "WABLNR" , "VERSL" , "WTART" , "BW\
C GRL" , "WAERS" , "AUFKZ" , "TRFGR" , "TRFST" , "PRAKN" , "PRAKZ" , "OTYPE" , "PLANS" , "KOKRS" , "ME\
C INH" , "TCURR" , "PRICE" , "ARBID" , "WERKS" , "AUTYP" , "HRCOSTASG" , "HRKOSTL" , "HRLSTAR" , "HRFU\
C ND" , "HRFUNC_AREA" , "HRGRANT_NBR" , "BEMOT" , "UNIT" , "STATKEYFIG" , "TASKTYPE" , "TASKLEVEL" , "\
C TASKCOMPONENT" , "BUKRS" , "ERSDA" , "ERSTM" , "ERNAM" , "LAEDA" , "LAETM" , "AENAM" , "APNAM" , "AP\
C DAT" , "WORKITEMID" , "LOGSYS" , "STATUS" , "REFCOUNTER" , "REASON" , "BELNR" , "EXTSYSTEM" , "EXTAP\
C PLICATION" , "EXTDOCUMENTNO" , "TASKCOUNTER" , "CATSHOURS" , "BEGUZ" , "ENDUZ" , "VTKEN" , "ALLDF" ,\
C "OFMNW" , "PEDD" , "AUERU" , "LTXA1" , "LONGTEXT" , "ERUZU" , "CATSAMOUNT" , "CATSQUANTITY" , "ZCAT\
C SPLAN" , "ROUTE" , "KUNNR" , "MVGR1" , "GSBER" , "SNAME" , "MAKTX" , "ZAVGHRS" , "ZQANT" , "ZPERNR" \
C FROM "CATSDB" WHERE "MANDT" = :A0 AND "WORKDATE" = :A1 AND "WERKS" = :A2 AND "STATUS" < :A3;
C sc_p=045B18B4,no=29,idc_p=00000000,con=0,act=1,slen=1291,smax=1536,#vars=4,stmt=34DA78C8,table=CATSDB
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=345E20EC
C IN : cols=4,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=17,vmax=32,bound=1,iobuf_p=045DFFA8,vda_p=3470A8D8
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=105,rmax=58,xcnt=58,rpc=1,rowi=0,rtot=1,upto=-1,rsize=895,vmax=128,bound=1,iobuf_p=0E0A4EC8,vda_p=34F8F7E8
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT "MANDT" , "COUNTER" , "PERNR" , "WORKDATE" , "SKOSTL" , "LSTAR" , "SEBELN" , "SEBELP" , "SPRZ\
C NR" , "LSTNR" , "RKOSTL" , "RPROJ" , "RAUFNR" , "RNPLNR" , "RAUFPL" , "RAPLZL" , "RKDAUF" , "RKDPOS"\
C , "RKSTR" , "RPRZNR" , "PAOBJNR" , "FUND" , "FUNC_AREA" , "GRANT_NBR" , "S_FUND" , "S_FUNC_AREA" , \
C "S_GRANT_NBR" , "AWART" , "LGART" , "KAPID" , "SPLIT" , "REINR" , "WABLNR" , "VERSL" , "WTART" , "BW\
C GRL" , "WAERS" , "AUFKZ" , "TRFGR" , "TRFST" , "PRAKN" , "PRAKZ" , "OTYPE" , "PLANS" , "KOKRS" , "ME\
C INH" , "TCURR" , "PRICE" , "ARBID" , "WERKS" , "AUTYP" , "HRCOSTASG" , "HRKOSTL" , "HRLSTAR" , "HRFU\
C ND" , "HRFUNC_AREA" , "HRGRANT_NBR" , "BEMOT" , "UNIT" , "STATKEYFIG" , "TASKTYPE" , "TASKLEVEL" , "\
C TASKCOMPONENT" , "BUKRS" , "ERSDA" , "ERSTM" , "ERNAM" , "LAEDA" , "LAETM" , "AENAM" , "APNAM" , "AP\
C DAT" , "WORKITEMID" , "LOGSYS" , "STATUS" , "REFCOUNTER" , "REASON" , "BELNR" , "EXTSYSTEM" , "EXTAP\
C PLICATION" , "EXTDOCUMENTNO" , "TASKCOUNTER" , "CATSHOURS" , "BEGUZ" , "ENDUZ" , "VTKEN" , "ALLDF" ,\
C "OFMNW" , "PEDD" , "AUERU" , "LTXA1" , "LONGTEXT" , "ERUZU" , "CATSAMOUNT" , "CATSQUANTITY" , "ZCAT\
C SPLAN" , "ROUTE" , "KUNNR" , "MVGR1" , "GSBER" , "SNAME" , "MAKTX" , "ZAVGHRS" , "ZQANT" , "ZPERNR" \
C FROM "CATSDB" WHERE "MANDT" = :A0 AND "WORKDATE" = :A1 AND "WERKS" = :A2 AND "STATUS" < :A3;
B ***LOG BYM=> severe DB error 3114 ; work process in reconnect status [dbsh#3 @ 1123] [dbsh 1123 ]
B ***LOG BY4=> sql error 3114 performing FET on table CATSDB [dbtran#10 @ 7292] [dbtran 7292 ]
B ***LOG BY0=> ORA-03114: not connected to ORACLE [dbtran#10 @ 7292] [dbtran 7292 ]
B dbtran ERROR LOG (hdl_dbsl_error): DbSl 'FET'
B RSLT: {dbsl=99, tran=1}
B FHDR: {tab='CATSDB', fcode=225, mode=2, bpb=0, dbcnt=0, crsr=1,
B hold=0, keep=1, xfer=0, pkg=0, upto=0, init:b=0,
B init:p=00000000, init:#=871, wa:p=0XA000DC88, wa:#=871}
B dbtran ERROR LOG (hdl_dbsl_error): DbSl 'FET'
B STMT:
B CRSR: {tab='CATSDB', id=1, hold=0, prop=0x1000, max.in@0=1, fae:blk=1,
B con:id=0, con:vndr=5, val=2,
B key:#=4, xfer=0, xin:#=0, row:#=0, upto=0, wa:p=0XA000DC88}
C *** ERROR => Error 3114 in stmt_fetch()
[dbsloci.c 13001]
C *** ERROR => ORA-3114 occurred when executing SQL statement (parse error offset=0)
[dbsloci.c 13002]
C sc_p=045B52E4,no=225,idc_p=045C400C,con=0,act=1,slen=184,smax=2048,#vars=3,stmt=35BBB778,table=REPOLOAD
C SELECT "UNAM" , "UDAT" , "UTIME" , "L_DATALG" , "Q_DATALG" , "SDAT" , "STIME" , "MINOR_VERS" , "MAJO\
C R_VERS" FROM "REPOLOAD" WHERE "PROGNAME" = :A0 AND "R3STATE" = :A1 AND "MACH" = :A2 ;
C sc_p=045B52E4,no=225,idc_p=045C400C,con=0,act=1,slen=184,smax=2048,#vars=3,stmt=35BBB778,table=REPOLOAD
C prep=0,lit=0,nsql=0,lobret=0,#exec=29,dbcnt=0,upsh_p=00000000,ocistmth_p=34B9ADD4
C IN : cols=3,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=45,vmax=32,bound=1,iobuf_p=0E0A4EC8,vda_p=31361B18
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=9,rmax=1,xcnt=1,rpc=1,rowi=0,rtot=1,upto=-1,rsize=56,vmax=32,bound=1,iobuf_p=045DFFA8,vda_p=345C39B8
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT "UNAM" , "UDAT" , "UTIME" , "L_DATALG" , "Q_DATALG" , "SDAT" , "STIME" , "MINOR_VERS" , "MAJO\
C R_VERS" FROM "REPOLOAD" WHERE "PROGNAME" = :A0 AND "R3STATE" = :A1 AND "MACH" = :A2 ;
B ***LOG BYM=> severe DB error 3114 ; work process in reconnect status [dbsh#3 @ 1123] [dbsh 1123 ]
B ***LOG BY4=> sql error 3114 performing SEL on table REPOLOAD [dbrepo#6 @ 2657] [dbrepo 2657 ]
B ***LOG BY0=> ORA-03114: not connected to ORACLE [dbrepo#6 @ 2657] [dbrepo 2657 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_VMIT_CLEANUP entered.
A ** RABAX: level LEV_RX_VMIT_CLEANUP completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
C *** ERROR => OCI-call 'OCITransRollback' failed: rc = 3114
[dboci.c 3127]
B ***LOG BYM=> severe DB error 3114 ; work process in reconnect status [dbsh#3 @ 1123] [dbsh 1123 ]
B Reconnect state is entered by connection:
B 0: name = R/3, con_id = 000000000 state = ACTIVE , perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
B hdl_error_on_commit_rollback: DB-ROLLBACK detected RECONNECT state
M ThShortCommit: db unusable
B db_con_reconnect disconnecting connection:
B 0: name = R/3, con_id = 000000000 state = INACTIVE , perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=045D7FA4,usrhp=345E67A0)
C Detaching from DB Server (con_hdl=0,svchp=045D7FA4,srvhp=045D0174)
C Now I'm disconnected from ORACLE
B db_con_reconnect performing the reconnect for con:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
C got NLS_LANG='AMERICAN_AMERICA.US7ASCII' from environment
C Client NLS settings:
C Logon as OPS$-user to get SAPR3's password
C Connecting as /@PRD on connection 0 (nls_hdl 0) ... (dbsl 640 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 US7ASCII 1 045CBB38 0E0A4648 0E0A40B0
C Attaching to DB Server PRD (con_hdl=0,svchp=045
SM51 log entries:
09:00:32 MS Q0I Operating system call recv failed (error no. 10054)
09:00:32 DP Q0K Connection to message server (on FCMSPROD) established
09:00:32 DIA 004 040 181JOLENES VA02 BYM SQL error 3114 . Work processes in reconnect status
09:00:32 DP Q1C MsgServer Hardware ID Was Determined
09:00:32 DIA 001 040 181ANNELINEJ VA42 BYY Work process has left reconnect status
09:00:32 DIA 001 040 181ANNELINEJ VA42 AB0 Run-time error "DBIF_REPO_SQL_ERROR" occurred
09:00:32 DIA 014 040 161ADRIV VA02 BYY Work process has left reconnect status
09:00:32 DIA 013 040 140ELECIA BYY Work process has left reconnect status
09:00:32 DIA 003 040 133MIRANDAV KO88 BYY Work process has left reconnect status
09:00:32 DIA 003 040 133MIRANDAV KO88 AB0 Run-time error "DBIF_REPO_SQL_ERROR" occurred
09:00:32 DIA 001 040 181ANNELINEJ VA42 AB1 > Short dump "081128 090032 FCMSPROD 181ANNELINEJ" generated
09:00:32 DIA 003 040 133MIRANDAV KO88 AB1 > Short dump "081128 090032 FCMSPROD 133MIRANDAV " generated
09:00:32 DIA 009 040 120ELIZEP FB01 BYY Work process has left reconnect status
09:00:33 DIA 009 040 120ELIZEP FB01 AB0 Run-time error "DBIF_REPO_SQL_ERROR" occurred
09:00:33 DIA 004 040 181JOLENES VA02 BYY Work process has left reconnect status
09:00:33 DIA 002 040 133KOEKIEJ BYY Work process has left reconnect status
09:00:33 DIA 002 040 133KOEKIEJ AB0 Run-time error "DBIF_REPO_SQL_ERROR" occurred
09:00:33 DIA 004 040 181JOLENES VA02 AB0 Run-time error "DBIF_REPO_SQL_ERROR" occurred
09:00:33 DIA 009 040 120ELIZEP FB01 AB1 > Short dump "081128 090033 FCMSPROD 120ELIZEP " generated
09:00:33 DIA 005 040 181CLIVEB VA02 BYY Work process has left reconnect status
09:00:33 DIA 003 R0Z The update dispatch info was reset
09:00:33 DIA 003 R0Z The update dispatch info was reset
Please can you assist in maybe you have seen this before.
Regards
PieterHi
Yes I have gone through the Oracle Alert log several time, It is huge, but I am pasting an extract for the entire day this was happening into this reply. Oracle version is 9.2.0.8.0 with the only intrim path I can see being installed : 6130293.
Following is the extract from Alert Log for the day this occurred, again I must stress that this happens only on high system load days like month end:
Fri Nov 28 03:43:33 2008
ALTER TABLESPACE "PSAPBTABI" END BACKUP
Fri Nov 28 03:43:33 2008
Completed: ALTER TABLESPACE "PSAPBTABI" END BACKUP
Fri Nov 28 03:43:37 2008
ALTER TABLESPACE "PSAPCLUD" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPCLUD" BEGIN BACKUP
Fri Nov 28 03:53:38 2008
ALTER TABLESPACE "PSAPCLUD" END BACKUP
Fri Nov 28 03:53:38 2008
Completed: ALTER TABLESPACE "PSAPCLUD" END BACKUP
Fri Nov 28 03:53:42 2008
ALTER TABLESPACE "PSAPCLUI" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPCLUI" BEGIN BACKUP
Fri Nov 28 03:54:36 2008
ALTER TABLESPACE "PSAPCLUI" END BACKUP
Fri Nov 28 03:54:36 2008
Completed: ALTER TABLESPACE "PSAPCLUI" END BACKUP
Fri Nov 28 03:54:38 2008
ALTER TABLESPACE "PSAPDDICD" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPDDICD" BEGIN BACKUP
Fri Nov 28 03:55:47 2008
ALTER TABLESPACE "PSAPDDICD" END BACKUP
Fri Nov 28 03:55:47 2008
Completed: ALTER TABLESPACE "PSAPDDICD" END BACKUP
Fri Nov 28 03:55:50 2008
ALTER TABLESPACE "PSAPDDICI" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPDDICI" BEGIN BACKUP
Fri Nov 28 03:56:41 2008
ALTER TABLESPACE "PSAPDDICI" END BACKUP
Fri Nov 28 03:56:41 2008
Completed: ALTER TABLESPACE "PSAPDDICI" END BACKUP
Fri Nov 28 03:56:45 2008
ALTER TABLESPACE "PSAPDOCUD" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPDOCUD" BEGIN BACKUP
Fri Nov 28 03:56:49 2008
ALTER TABLESPACE "PSAPDOCUD" END BACKUP
Completed: ALTER TABLESPACE "PSAPDOCUD" END BACKUP
Fri Nov 28 03:56:52 2008
ALTER TABLESPACE "PSAPDOCUI" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPDOCUI" BEGIN BACKUP
Fri Nov 28 03:56:55 2008
ALTER TABLESPACE "PSAPDOCUI" END BACKUP
Completed: ALTER TABLESPACE "PSAPDOCUI" END BACKUP
Fri Nov 28 03:56:59 2008
ALTER TABLESPACE "PSAPEL640D" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPEL640D" BEGIN BACKUP
Fri Nov 28 04:03:46 2008
ALTER TABLESPACE "PSAPEL640D" END BACKUP
Fri Nov 28 04:03:46 2008
Completed: ALTER TABLESPACE "PSAPEL640D" END BACKUP
Fri Nov 28 04:03:50 2008
ALTER TABLESPACE "PSAPEL640I" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPEL640I" BEGIN BACKUP
Fri Nov 28 04:04:37 2008
ALTER TABLESPACE "PSAPEL640I" END BACKUP
Fri Nov 28 04:04:37 2008
Completed: ALTER TABLESPACE "PSAPEL640I" END BACKUP
Fri Nov 28 04:04:40 2008
ALTER TABLESPACE "PSAPES640D" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPES640D" BEGIN BACKUP
Fri Nov 28 04:20:17 2008
ALTER TABLESPACE "PSAPES640D" END BACKUP
Fri Nov 28 04:20:17 2008
Completed: ALTER TABLESPACE "PSAPES640D" END BACKUP
Fri Nov 28 04:20:20 2008
ALTER TABLESPACE "PSAPES640I" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPES640I" BEGIN BACKUP
Fri Nov 28 04:36:26 2008
ALTER TABLESPACE "PSAPES640I" END BACKUP
Fri Nov 28 04:36:26 2008
Completed: ALTER TABLESPACE "PSAPES640I" END BACKUP
Fri Nov 28 04:36:29 2008
ALTER TABLESPACE "PSAPLOADD" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPLOADD" BEGIN BACKUP
Fri Nov 28 04:36:40 2008
ALTER TABLESPACE "PSAPLOADD" END BACKUP
Fri Nov 28 04:36:40 2008
Completed: ALTER TABLESPACE "PSAPLOADD" END BACKUP
Fri Nov 28 04:36:43 2008
ALTER TABLESPACE "PSAPLOADI" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPLOADI" BEGIN BACKUP
Fri Nov 28 04:36:53 2008
ALTER TABLESPACE "PSAPLOADI" END BACKUP
Completed: ALTER TABLESPACE "PSAPLOADI" END BACKUP
Fri Nov 28 04:36:56 2008
ALTER TABLESPACE "PSAPPOOLD" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPPOOLD" BEGIN BACKUP
Fri Nov 28 04:41:04 2008
ALTER TABLESPACE "PSAPPOOLD" END BACKUP
Fri Nov 28 04:41:04 2008
Completed: ALTER TABLESPACE "PSAPPOOLD" END BACKUP
Fri Nov 28 04:41:08 2008
ALTER TABLESPACE "PSAPPOOLI" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPPOOLI" BEGIN BACKUP
Fri Nov 28 04:45:17 2008
ALTER TABLESPACE "PSAPPOOLI" END BACKUP
Fri Nov 28 04:45:17 2008
Completed: ALTER TABLESPACE "PSAPPOOLI" END BACKUP
Fri Nov 28 04:45:21 2008
ALTER TABLESPACE "PSAPPROTD" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPPROTD" BEGIN BACKUP
Fri Nov 28 04:47:25 2008
ALTER TABLESPACE "PSAPPROTD" END BACKUP
Fri Nov 28 04:47:25 2008
Completed: ALTER TABLESPACE "PSAPPROTD" END BACKUP
Fri Nov 28 04:47:29 2008
ALTER TABLESPACE "PSAPPROTI" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPPROTI" BEGIN BACKUP
Fri Nov 28 04:48:09 2008
ALTER TABLESPACE "PSAPPROTI" END BACKUP
Fri Nov 28 04:48:09 2008
Completed: ALTER TABLESPACE "PSAPPROTI" END BACKUP
Fri Nov 28 04:48:13 2008
ALTER TABLESPACE "PSAPSOURCED" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPSOURCED" BEGIN BACKUP
Fri Nov 28 04:48:46 2008
ALTER TABLESPACE "PSAPSOURCED" END BACKUP
Fri Nov 28 04:48:46 2008
Completed: ALTER TABLESPACE "PSAPSOURCED" END BACKUP
Fri Nov 28 04:48:49 2008
ALTER TABLESPACE "PSAPSOURCEI" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPSOURCEI" BEGIN BACKUP
Fri Nov 28 04:49:29 2008
ALTER TABLESPACE "PSAPSOURCEI" END BACKUP
Fri Nov 28 04:49:29 2008
Completed: ALTER TABLESPACE "PSAPSOURCEI" END BACKUP
Fri Nov 28 04:49:34 2008
ALTER TABLESPACE "PSAPSTABD" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPSTABD" BEGIN BACKUP
Fri Nov 28 05:05:16 2008
ALTER TABLESPACE "PSAPSTABD" END BACKUP
Fri Nov 28 05:05:16 2008
Completed: ALTER TABLESPACE "PSAPSTABD" END BACKUP
Fri Nov 28 05:05:23 2008
ALTER TABLESPACE "PSAPSTABI" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPSTABI" BEGIN BACKUP
Fri Nov 28 05:21:15 2008
ALTER TABLESPACE "PSAPSTABI" END BACKUP
Fri Nov 28 05:21:15 2008
Completed: ALTER TABLESPACE "PSAPSTABI" END BACKUP
Fri Nov 28 05:21:19 2008
ALTER TABLESPACE "PSAPUSER1D" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPUSER1D" BEGIN BACKUP
Fri Nov 28 05:21:42 2008
ALTER TABLESPACE "PSAPUSER1D" END BACKUP
Fri Nov 28 05:21:42 2008
Completed: ALTER TABLESPACE "PSAPUSER1D" END BACKUP
Fri Nov 28 05:21:46 2008
ALTER TABLESPACE "PSAPUSER1I" BEGIN BACKUP
Completed: ALTER TABLESPACE "PSAPUSER1I" BEGIN BACKUP
Fri Nov 28 05:23:03 2008
ALTER TABLESPACE "PSAPUSER1I" END BACKUP
Fri Nov 28 05:23:03 2008
Completed: ALTER TABLESPACE "PSAPUSER1I" END BACKUP
Fri Nov 28 05:23:06 2008
ALTER TABLESPACE "SYSTEM" BEGIN BACKUP
Completed: ALTER TABLESPACE "SYSTEM" BEGIN BACKUP
Fri Nov 28 05:24:03 2008
ALTER TABLESPACE "SYSTEM" END BACKUP
Fri Nov 28 05:24:03 2008
Completed: ALTER TABLESPACE "SYSTEM" END BACKUP
Fri Nov 28 05:24:07 2008
ALTER TABLESPACE "UNDOTBS1" BEGIN BACKUP
Completed: ALTER TABLESPACE "UNDOTBS1" BEGIN BACKUP
Fri Nov 28 05:42:06 2008
ALTER TABLESPACE "UNDOTBS1" END BACKUP
Fri Nov 28 05:42:06 2008
Completed: ALTER TABLESPACE "UNDOTBS1" END BACKUP
Fri Nov 28 05:42:07 2008
ALTER DATABASE BACKUP CONTROLFILE TO 'C:\Program Files\CA\BrightStor ARCserve Backup Enterprise Option for SAP R3 for Oracle\CONTROL.PRD' REUSE
Completed: ALTER DATABASE BACKUP CONTROLFILE TO 'C:\Program F
Fri Nov 28 05:42:14 2008
Beginning log switch checkpoint up to RBA [0x77f2.2.10], SCN: 0x0000.3c0ae436
Thread 1 advanced to log sequence 30706
Current log# 2 seq# 30706 mem# 0: C:\ORACLE\PRD\ORIGLOGB\LOGPRD02_M1.ORA
Current log# 2 seq# 30706 mem# 1: F:\ORACLE\PRD\MIRRLOGB\LOGPRD02_M2.ORA
Fri Nov 28 05:42:14 2008
ARC0: Evaluating archive log 3 thread 1 sequence 30705
ARC0: Beginning to archive log 3 thread 1 sequence 30705
Creating archive destination LOG_ARCHIVE_DEST_1: 'F:\ORACLE\PRD\SAPARCH\ARC30705.001'
Fri Nov 28 05:42:27 2008
ARC1: Evaluating archive log 3 thread 1 sequence 30705
ARC1: Unable to archive log 3 thread 1 sequence 30705
Log actively being archived by another process
Fri Nov 28 05:42:29 2008
ARC0: Completed archiving log 3 thread 1 sequence 30705
Fri Nov 28 06:11:26 2008
Completed checkpoint up to RBA [0x77f2.2.10], SCN: 0x0000.3c0ae436
Fri Nov 28 09:20:59 2008
Beginning log switch checkpoint up to RBA [0x77f3.2.10], SCN: 0x0000.3c0b739c
Thread 1 advanced to log sequence 30707
Current log# 1 seq# 30707 mem# 0: C:\ORACLE\PRD\ORIGLOGA\LOGPRD01_M1.ORA
Current log# 1 seq# 30707 mem# 1: F:\ORACLE\PRD\MIRRLOGA\LOGPRD01_M2.ORA
Fri Nov 28 09:20:59 2008
ARC0: Evaluating archive log 2 thread 1 sequence 30706
ARC0: Beginning to archive log 2 thread 1 sequence 30706
Creating archive destination LOG_ARCHIVE_DEST_1: 'F:\ORACLE\PRD\SAPARCH\ARC30706.001'
Fri Nov 28 09:21:18 2008
ARC0: Completed archiving log 2 thread 1 sequence 30706
Fri Nov 28 09:51:06 2008
Completed checkpoint up to RBA [0x77f3.2.10], SCN: 0x0000.3c0b739c
Fri Nov 28 10:44:43 2008
Beginning log switch checkpoint up to RBA [0x77f4.2.10], SCN: 0x0000.3c0bb876
Thread 1 advanced to log sequence 30708
Current log# 4 seq# 30708 mem# 0: C:\ORACLE\PRD\ORIGLOGB\LOGPRD04_M1.ORA
Current log# 4 seq# 30708 mem# 1: F:\ORACLE\PRD\MIRRLOGB\LOGPRD04_M2.ORA
Fri Nov 28 10:44:43 2008
ARC0: Evaluating archive log 1 thread 1 sequence 30707
ARC0: Beginning to archive log 1 thread 1 sequence 30707
Creating archive destination LOG_ARCHIVE_DEST_1: 'F:\ORACLE\PRD\SAPARCH\ARC30707.001'
Fri Nov 28 10:45:07 2008
ARC1: Evaluating archive log 1 thread 1 sequence 30707
ARC1: Unable to archive log 1 thread 1 sequence 30707
Log actively being archived by another process
Fri Nov 28 10:45:09 2008
ARC0: Completed archiving log 1 thread 1 sequence 30707
Fri Nov 28 11:13:20 2008
Completed checkpoint up to RBA [0x77f4.2.10], SCN: 0x0000.3c0bb876
Fri Nov 28 11:45:09 2008
Beginning log switch checkpoint up to RBA [0x77f5.2.10], SCN: 0x0000.3c0bfc29
Thread 1 advanced to log sequence 30709
Current log# 3 seq# 30709 mem# 0: C:\ORACLE\PRD\ORIGLOGA\LOGPRD03_M1.ORA
Current log# 3 seq# 30709 mem# 1: F:\ORACLE\PRD\MIRRLOGA\LOGPRD03_M2.ORA
Fri Nov 28 11:45:09 2008
ARC0: Evaluating archive log 4 thread 1 sequence 30708
ARC0: Beginning to archive log 4 thread 1 sequence 30708
Creating archive destination LOG_ARCHIVE_DEST_1: 'F:\ORACLE\PRD\SAPARCH\ARC30708.001'
Fri Nov 28 11:45:13 2008
ARC1: Evaluating archive log 4 thread 1 sequence 30708
ARC1: Unable to archive log 4 thread 1 sequence 30708
Log actively being archived by another process
Fri Nov 28 11:45:29 2008
ARC0: Completed archiving log 4 thread 1 sequence 30708
Fri Nov 28 12:15:17 2008
Completed checkpoint up to RBA [0x77f5.2.10], SCN: 0x0000.3c0bfc29
Fri Nov 28 12:50:23 2008
Beginning log switch checkpoint up to RBA [0x77f6.2.10], SCN: 0x0000.3c0c3298
Thread 1 advanced to log sequence 30710
Current log# 2 seq# 30710 mem# 0: C:\ORACLE\PRD\ORIGLOGB\LOGPRD02_M1.ORA
Current log# 2 seq# 30710 mem# 1: F:\ORACLE\PRD\MIRRLOGB\LOGPRD02_M2.ORA
Fri Nov 28 12:50:24 2008
ARC0: Evaluating archive log 3 thread 1 sequence 30709
ARC0: Beginning to archive log 3 thread 1 sequence 30709
Creating archive destination LOG_ARCHIVE_DEST_1: 'F:\ORACLE\PRD\SAPARCH\ARC30709.001'
Fri Nov 28 12:50:40 2008
ARC0: Completed archiving log 3 thread 1 sequence 30709
Fri Nov 28 13:20:29 2008
Completed checkpoint up to RBA [0x77f6.2.10], SCN: 0x0000.3c0c3298
Fri Nov 28 14:27:01 2008
Beginning log switch checkpoint up to RBA [0x77f7.2.10], SCN: 0x0000.3c0c75c1
Thread 1 advanced to log sequence 30711
Current log# 1 seq# 30711 mem# 0: C:\ORACLE\PRD\ORIGLOGA\LOGPRD01_M1.ORA
Current log# 1 seq# 30711 mem# 1: F:\ORACLE\PRD\MIRRLOGA\LOGPRD01_M2.ORA
Fri Nov 28 14:27:01 2008
ARC0: Evaluating archive log 2 thread 1 sequence 30710
ARC0: Beginning to archive log 2 thread 1 sequence 30710
Creating archive destination LOG_ARCHIVE_DEST_1: 'F:\ORACLE\PRD\SAPARCH\ARC30710.001'
Fri Nov 28 14:27:25 2008
ARC0: Completed archiving log 2 thread 1 sequence 30710
Fri Nov 28 14:57:08 2008
Completed checkpoint up to RBA [0x77f7.2.10], SCN: 0x0000.3c0c75c1
Fri Nov 28 15:57:26 2008
Beginning log switch checkpoint up to RBA [0x77f8.2.10], SCN: 0x0000.3c0cb34a
Thread 1 advanced to log sequence 30712
Current log# 4 seq# 30712 mem# 0: C:\ORACLE\PRD\ORIGLOGB\LOGPRD04_M1.ORA
Current log# 4 seq# 30712 mem# 1: F:\ORACLE\PRD\MIRRLOGB\LOGPRD04_M2.ORA
Fri Nov 28 15:57:26 2008
ARC0: Evaluating archive log 1 thread 1 sequence 30711
ARC0: Beginning to archive log 1 thread 1 sequence 30711
Creating archive destination LOG_ARCHIVE_DEST_1: 'F:\ORACLE\PRD\SAPARCH\ARC30711.001'
Fri Nov 28 15:57:40 2008
ARC1: Evaluating archive log 1 thread 1 sequence 30711
ARC1: Unable to archive log 1 thread 1 sequence 30711
Log actively being archived by another process
Fri Nov 28 15:57:40 2008
ARC0: Completed archiving log 1 thread 1 sequence 30711
Fri Nov 28 16:27:31 2008
Completed checkpoint up to RBA [0x77f8.2.10], SCN: 0x0000.3c0cb34a
Fri Nov 28 17:02:12 2008
Beginning log switch checkpoint up to RBA [0x77f9.2.10], SCN: 0x0000.3c0cc245
Thread 1 advanced to log sequence 30713
Current log# 3 seq# 30713 mem# 0: C:\ORACLE\PRD\ORIGLOGA\LOGPRD03_M1.ORA
Current log# 3 seq# 30713 mem# 1: F:\ORACLE\PRD\MIRRLOGA\LOGPRD03_M2.ORA
Fri Nov 28 17:02:12 2008
ARC0: Evaluating archive log 4 thread 1 sequence 30712
ARC0: Beginning to archive log 4 thread 1 sequence 30712
Creating archive destination LOG_ARCHIVE_DEST_1: 'F:\ORACLE\PRD\SAPARCH\ARC30712.001'
Fri Nov 28 17:02:25 2008
ARC0: Completed archiving log 4 thread 1 sequence 30712
Fri Nov 28 17:32:17 2008
Completed checkpoint up to RBA [0x77f9.2.10], SCN: 0x0000.3c0cc245
Fri Nov 28 18:00:19 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPBTABD" COALESCE
Fri Nov 28 18:00:19 2008
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPBTABD" COALE
Fri Nov 28 18:00:19 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPBTABI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPBTABI" COALE
Fri Nov 28 18:00:19 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPCLUD" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPCLUD" COALES
Fri Nov 28 18:00:20 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPCLUI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPCLUI" COALES
Fri Nov 28 18:00:21 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPDDICD" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPDDICD" COALE
Fri Nov 28 18:00:23 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPDDICI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPDDICI" COALE
Fri Nov 28 18:00:23 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPDOCUD" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPDOCUD" COALE
Fri Nov 28 18:00:23 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPDOCUI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPDOCUI" COALE
Fri Nov 28 18:00:24 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPEL640D" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPEL640D" COAL
Fri Nov 28 18:00:26 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPEL640I" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPEL640I" COAL
Fri Nov 28 18:00:27 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPES640D" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPES640D" COAL
Fri Nov 28 18:00:27 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPES640I" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPES640I" COAL
Fri Nov 28 18:00:27 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPLOADD" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPLOADD" COALE
Fri Nov 28 18:00:27 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPLOADI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPLOADI" COALE
Fri Nov 28 18:00:27 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPPOOLD" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPPOOLD" COALE
Fri Nov 28 18:00:28 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPPOOLI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPPOOLI" COALE
Fri Nov 28 18:00:28 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPPROTD" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPPROTD" COALE
Fri Nov 28 18:00:28 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPPROTI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPPROTI" COALE
Fri Nov 28 18:00:28 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPSOURCED" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPSOURCED" COA
Fri Nov 28 18:00:28 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPSOURCEI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPSOURCEI" COA
Fri Nov 28 18:00:28 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPSTABD" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPSTABD" COALE
Fri Nov 28 18:00:28 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPSTABI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPSTABI" COALE
Fri Nov 28 18:00:28 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPUSER1D" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPUSER1D" COAL
Fri Nov 28 18:00:28 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPUSER1I" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPUSER1I" COAL
Fri Nov 28 18:00:28 2008
/* BRCONNECT */ ALTER TABLESPACE "SYSTEM" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "SYSTEM" COALESCE
Fri Nov 28 20:00:17 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPBTABD" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPBTABD" COALE
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPBTABI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPBTABI" COALE
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPCLUD" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPCLUD" COALES
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPCLUI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPCLUI" COALES
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPDDICD" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPDDICD" COALE
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPDDICI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPDDICI" COALE
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPDOCUD" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPDOCUD" COALE
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPDOCUI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPDOCUI" COALE
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPEL640D" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPEL640D" COAL
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPEL640I" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPEL640I" COAL
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPES640D" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPES640D" COAL
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPES640I" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPES640I" COAL
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPLOADD" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPLOADD" COALE
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPLOADI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPLOADI" COALE
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPPOOLD" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPPOOLD" COALE
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPPOOLI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPPOOLI" COALE
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPPROTD" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPPROTD" COALE
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPPROTI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPPROTI" COALE
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPSOURCED" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPSOURCED" COA
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPSOURCEI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPSOURCEI" COA
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPSTABD" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPSTABD" COALE
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPSTABI" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPSTABI" COALE
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPUSER1D" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPUSER1D" COAL
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "PSAPUSER1I" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "PSAPUSER1I" COAL
Fri Nov 28 20:00:18 2008
/* BRCONNECT */ ALTER TABLESPACE "SYSTEM" COALESCE
Completed: /* BRCONNECT */ ALTER TABLESPACE "SYSTEM" COALESCE
Fri Nov 28 20:00:36 2008
Beginning log switch checkpoint up to RBA [0x77fa.2.10], SCN: 0x0000.3c0cf8e3
Thread 1 advanced to log sequence 30714
Current log# 2 seq# 30714 mem# 0: C:\ORACLE\PRD\ORIGLOGB\LOGPRD02_M1.ORA
Current log# 2 seq# 30714 mem# 1: F:\ORACLE\PRD\MIRRLOGB\LOGPRD02_M2.ORA
Fri Nov 28 20:00:36 2008
ARC0: Evaluating archive log 3 thread 1 sequence 30713
ARC0: Beginning to archive log 3 thread 1 sequence 30713
Creating archive destination LOG_ARCHIVE_DEST_1: 'F:\ORACLE\PRD\SAPARCH\ARC30713.001'
Fri Nov 28 20:00:44 2008
ARC1: Evaluating archive log 3 thread 1 sequence 30713
ARC1: Unable to archive log 3 thread 1 sequence 30713
Log actively being archived by another process
Fri Nov 28 20:00:47 2008
ARC0: Completed archiving log 3 thread 1 sequence 30713
Dump file f:\oracle\prd\saptrace\background\alert_prd.log
Mon Dec 01 09:03:16 2008
ORACLE V9.2.0.8.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.2 Service Pack 2, CPU type 586
Mon Dec 01 09:03:16 2008
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 2
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.8.0.
System parameters with non-default values:
processes = 120
sessions = 150
timed_statistics = TRUE
shared_pool_size = 822083584
large_pool_size = 8388608
java_pool_size = 8388608
enqueue_resources = 8000
filesystemio_options = SETALL
control_files = C:\oracle\PRD\origlogA\ctrlPRD.ctl, F:\oracle\PRD\saparch\ctrlPRD.ctl, E:\oracle\PRD\sapdata1\ctrlPRD.ctl
db_block_checksum = FALSE
db_block_size = 8192
db_cache_size = 1073741824
compatible = 9.2.0
log_archive_start = TRUE
log_archive_dest = F:\oracle\PRD\saparch
log_buffer = 4194304
log_checkpoint_interval = 0
db_files = 254
db_file_multiblock_read_count= 8
log_checkpoints_to_alert = TRUE
control_file_record_keep_time= 30
dml_locks = 2500
row_locking = always
replication_dependency_tracking= FALSE
transactions_per_rollback_segment= 20
transaction_auditing = FALSE
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 43200
remote_os_authent = TRUE
db_domain = world
service_names = PRD.world, PRD.WORLD
hash_join_enabled = FALSE
background_dump_dest = F:\Oracle\PRD\saptrace\background
user_dump_dest = F:\Oracle\PRD\saptrace\usertrace
max_dump_file_size = 1240
core_dump_dest = F:\Oracle\PRD\saptrace\background
optimizer_features_enable= 9.2.0
sort_area_size = 0
sort_area_retained_size = 0
db_name = PRD
open_cursors = 800
optimizer_mode = CHOOSE
sortelimination_cost_ratio= 10
btree_bitmap_plans = FALSE
eliminatecommon_subexpr= FALSE
pushjoin_predicate = FALSE
optimizerjoin_sel_sanity_check= TRUE
parallel_threads_per_cpu = 4
optimizer_index_cost_adj = 10
optimizer_index_caching = 50
optimpeek_user_binds = FALSE
pga_aggregate_target = 536870912
optimizeror_expansion = DEPTH
PMON started with pid=2, OS id=17336
DBW0 started with pid=3, OS id=16972
LGWR started with pid=4, OS id=16900
CKPT started with pid=5, OS id=17236
SMON started with pid=6, OS id=17436
Regards
Pieter -
OEM High Load Widget -- does it work with Windows 7?
The README page for the OEM High Load Widget ( http://www.oracle.com/technetwork/oem/grid-control/emgridcontrol-10-101399.html ) does not list Windows 7 as a supported O/S. Has anyone been able to get it to work on Windows 7 (64-bit)?
My new PC at work is running Windows 7 64-bit O/S. I've had good luck in getting everything I was running on my previous Win XP SP3 machine but the OEM High Load Widget is not connecting.
I have found that widget to be quite useful and really would like to be able to use it.Yes,http://manuals.info.apple.com/en_US/time_capsule_4th_gen_setup.pdf
-
Folks,
We have a weblogic server 9.2 which is running fine but after quiet a while at high load we observe that the server goes down and following exception is displayed in the server logs:
####<Nov 13, 2009 2:42:48 AM EST> <Error> <WebLogicServer> <ibmrxcptpnp-wb1> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1258098168215> <BEA-000337> <[STUCK] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "617" seconds working on the request "weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl@1cec1cec", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
java.net.SocketOutputStream.socketWrite0(Native Method)
java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:105)
java.net.SocketOutputStream.write(SocketOutputStream.java:149)
oracle.net.ns.DataPacket.send(Unknown Source)
oracle.net.ns.NetOutputStream.flush(Unknown Source)
oracle.net.ns.NetInputStream.getNextPacket(Unknown Source)
oracle.net.ns.NetInputStream.read(Unknown Source)
oracle.net.ns.NetInputStream.read(Unknown Source)
oracle.net.ns.NetInputStream.read(Unknown Source)
oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:1099)
oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:1070)
oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:478)
oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:216)
oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:955)
oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1060)
oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:839)
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1132)
oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3316)
oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3422)
weblogic.jdbc.common.internal.ConnectionEnv.test(ConnectionEnv.java:718)
weblogic.jdbc.common.internal.ConnectionEnv.test(ConnectionEnv.java:460)
weblogic.common.resourcepool.ResourcePoolImpl.checkResource(ResourcePoolImpl.java:1455)
weblogic.common.resourcepool.ResourcePoolImpl.checkAndReturnResource(ResourcePoolImpl.java:1372)
weblogic.common.resourcepool.ResourcePoolImpl.checkAndReturnResource(ResourcePoolImpl.java:1362)
weblogic.common.resourcepool.ResourcePoolImpl.testUnusedResources(ResourcePoolImpl.java:1767)
weblogic.common.resourcepool.ResourcePoolImpl.access$700(ResourcePoolImpl.java:37)
weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.timerExpired(ResourcePoolImpl.java:1935)
weblogic.timers.internal.TimerImpl.run(TimerImpl.java:265)
weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
>
Any answers?????Hi,
I have a similar issue on ODSI 10gR3 (WLS 10.3). I am having stuck threads - but, in my case it is clear that the database is down (not at the startup)
Here is some more info:
1. Test Connections On Reserve - Enabled
2. Default values for other parameters
Using Oracle thin driver for the connection pool "MyPool" -
./wlserver_10.3/server/lib/ojdbc6.jar
My question is:
1. How do I avoid the stuck thread caused when the database is down? During peak load, the stuck threads are causing some service requests to fail.
I did my homework and the closest option I could find is set the statementTimeout (which is set currently to the default value of -1 i.e. never timeout). Oracle documentation (http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/111070_readme.html) says that the ojdbc6.jar supports setQueryTimeout() method.
Is there any better way to attack this problem?
<Dec 21, 2009 12:11:18 AM EST> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM DUAL" set up for pool "MyPool" failed with exception: "java.sql.SQLRecoverableException: Io exception: Read failed: Connection timed out".>
<Dec 21, 2009 12:14:27 AM EST> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "MyPool": Io exception: The Network Adapter could not establish the connection>
<Dec 21, 2009 12:18:38 AM EST> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "600" seconds working on the request "weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl@297ac2b", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
Thread-52 "[STUCK] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, in native, suspended, waiting, priority=1, DAEMON> {
-- Waiting for notification on: javax.management.remote.rmi.RMIConnector$RMINotifClient@271498f[fat lock]
java.lang.Object.wait(Object.java:485)
com.sun.jmx.remote.internal.ClientNotifForwarder.postReconnection(ClientNotifForwarder.java:304)
javax.management.remote.rmi.RMIConnector$RMIClientCommunicatorAdmin.reconnectNotificationListeners(RMIConnector.java:1488)
javax.management.remote.rmi.RMIConnector$RMIClientCommunicatorAdmin.doStart(RMIConnector.java:1568)
com.sun.jmx.remote.internal.ClientCommunicatorAdmin.restart(ClientCommunicatorAdmin.java:72)
com.sun.jmx.remote.internal.ClientCommunicatorAdmin.gotIOException(ClientCommunicatorAdmin.java:34)
javax.management.remote.rmi.RMIConnector$RMIClientCommunicatorAdmin.gotIOException(RMIConnector.java:1420)
javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.getAttribute(RMIConnector.java:857)
weblogic.management.mbeanservers.domainruntime.internal.ManagedMBeanServerConnection.getAttribute(ManagedMBeanServerConnection.java:288)
javax.management.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:235)
weblogic.management.jmx.MBeanServerInvocationHandler.doInvoke(MBeanServerInvocationHandler.java:477)
weblogic.management.jmx.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:294)
$Proxy69.getServerRuntime(Unknown Source)
weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.lookupServerRuntime(DomainRuntimeServiceMBeanImpl.java:242)
sun.reflect.GeneratedMethodAccessor1880.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:575)
weblogic.management.jmx.modelmbean.WLSModelMBean.invoke(WLSModelMBean.java:355)
com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:831)
com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761)
weblogic.management.mbeanservers.domainruntime.internal.FederatedMBeanServerInterceptor.invoke(FederatedMBeanServerInterceptor.java:255)
weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:447)
weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:441)
weblogic.management.mbeanservers.internal.SecurityMBeanMgmtOpsInterceptor.invoke(SecurityMBeanMgmtOpsInterceptor.java:55)
weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:447)
weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:441)
weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:437)
weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor$10$1.run(AuthenticatedSubjectInterceptor.java:582)
weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor$10.run(AuthenticatedSubjectInterceptor.java:576)
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:350)
weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor.invoke(AuthenticatedSubjectInterceptor.java:570)
weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:305)
javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1378)
javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1264)
javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1338)
javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:761)
javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:136)
weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:211)
javax.management.remote.rmi.RMIConnectionImpl_1030_WLStub.invoke(Unknown Source)
javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:969)
com.bea.diagnostics.server.MBeanServerUtil.processRecordsFromArchive(MBeanServerUtil.java:177)
com.bea.diagnostics.server.MetricEarliestTimestampLocator$RecordProcessorDesc.identifyEarliestTimestamps(MetricEarliestTimestampLocator.java:261)
com.bea.diagnostics.server.MetricEarliestTimestampLocator.identifyEarliestTimestamps(MetricEarliestTimestampLocator.java:84)
com.bea.diagnostics.server.MetricEarliestTimestampLocator.timerExpired(MetricEarliestTimestampLocator.java:79)
weblogic.timers.internal.TimerImpl.run(TimerImpl.java:253)
weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:198)
weblogic.work.ExecuteThread.run(ExecuteThread.java:165)
<Dec 21, 2009 12:24:04 AM EST> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM DUAL" set up for pool "MyPool" failed with exception: "java.sql.SQLRecoverableException: Io exception: Connection reset".>
<Dec 21, 2009 12:24:04 AM EST> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "MyPool": Io exception: The Network Adapter could not establish the connection>
<Dec 21, 2009 12:24:04 AM EST> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "MyPool": Io exception: The Network Adapter could not establish the connection>
<Dec 21, 2009 12:24:05 AM EST> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "MyPool": Io exception: The Network Adapter could not establish the connection>
<Dec 21, 2009 12:24:07 AM EST> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "MyPool": Io exception: The Network Adapter could not establish the connection>
<Dec 21, 2009 12:24:12 AM EST> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "MyPool": Io exception: The Network Adapter could not establish the connection>
<Dec 21, 2009 12:24:17 AM EST> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "MyPool": Io exception: The Network Adapter could not establish the connection>
<Dec 21, 2009 12:24:22 AM EST> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "MyPool": Io exception: The Network Adapter could not establish the connection> -
Lenovo E540 - Dual External Monitors
Hi,
This question is about the Lenovo E540 laptop (with HD Graphics 4600 or 4400).
1.I would like to know if its possible to connect two external monitors to the laptop (using hdmi and vga ports together) - resulting in 3 active screens (laptop screen + 2 external monitors) while using Extend Mode ?
2.What is the max resolution's for the HDMI and VGA ports for external monitors?
I've search your forums and looked up using Google but i couldn't find any answers
Thanks!Anyone ?
-
2008 R2/ Win7 Offline Files Sync causing High Load on server
Hi Everyone,
I have recently been investigating extremely high CPU Usage from the System Process on my company's main File Cluster.
We managed to track SRV2.sys Threads causing high CPU load within the system process, but was having issues identifying why this was the case.
As per Microsoft's direction via support call, we have installed the latest SRV2.sys Hotfixes, but this does not appear to have allivated the issue we are experiencing. We have also added more CPU and Memory into both nodes, which has not helped either.
We have since managed to create a system dump and is being sent to MS Support for analysis.
I have noticed the following that appears to happen on our cluster:
Whenever our CAD/Design department run certain functions within their apps running on a windows 7 client (apps include MicroStation, Revit, AutoCAD etc) we see a massive spike and flatline of the system process.
We found several users with Windows 7 clients that have Configured Offline File to sync an entire Network Volume (some volumes are 2TB Plus, so would never fit on a users computer anyway, i was quite shocked when I found this). How we spotted this was through
Resource Monitor, the System Process was trolling through all the folders and files in a given volume (it was "reading every single folder). Now, while this was the system process, we could identify the user by using the Open Files view in Server Manager's
Share and Storage Management tool.
I have done a fair bit of research and found that a lot of CAD/Drawing applications in the market have issues with using SMB2 (srv2.sys). When reviewing the products that we use, I noticed that a lot of these products actually recommended disabling SMB2
and reverting to SMB1 on File Server and/or the clients.
I have gone down the path of disabling SMB2 on all Windows 7 clients that have these CAD Applications installed to assist with lowering the load (our other options are to potentially shift the CAD Volumes off our main file cluster to further isolation these
performance issues we have been experiencing.) We will be testing this again tomorrow to confirm that the issue is resolved when mass amounts of CAD users access data on these volumes via their CAD Application.
We only noticed the issue with Offline Files today with trying to sync an ENTIRE Volume. My questions are:
Should Offline File sync's really cause this much load on a File Server?
Would the the size of the volume the sync is trying to complete create this additional load within the system process?
What is the industry considered "Best Practice" regarding Offline Files setup for Volumes which could have up to 1000+ users attached? (My personal opinion is that Offline Files should only be sync of user "Personal/Home" Folders
as they users themselves have a 1 to 1 relationship with this data.)
Is there an easier way to identify what users have Offline Files enabled and "actually being used" (from my understanding, Sync Center and Offline Files are enabled by default, but you obviously have to add the folders/drives you wish to sync)?
If I disable the ability for Offline Files on the volumes, what will the user experience be when/if they try to sync their offline files config after this has been disabled on the volume?
Hoping for some guidance regarding this setup with Offline Files.
Thanks in Advance!
SimonHi Everyone,
Just thought I would give an update on this.
While we're still deploying http://support.microsoft.com/kb/2733363/en-us to
the remainder of our Windows 7 SP1 fleet, according to some Network Traces and XPerf that were sent to MS Support, it looks as though the issu with the Offline Files is now resolved.
However, we are still having some issues with High CPU with the System Process in particular. Upon review of the traces, they have found a lot of ABE related traffic, leading them to believe that the issue may also be caused by ABE Access on our File Cluster.
We already have the required hotfix for ABE on 2008 R2 installed (please see
http://support.microsoft.com/kb/2732618/en-us), although we have it set to a certain value that MS believe may be too high. Our current value is set to "5", as that is the lowest level of any type of permission is set (i.e. where the lowest level of inheritance
is broken).
I think I will mark this as resolved regarding the Offline Files issue (as it did resolve the problem with the Offline Files)...
Fingers crossed we can identify the rest of the high load within the System Process!!! -
Querying the toplink cache under high-load
We've had some interesting experiences with "querying" the TopLink Cache lately.
It was recently discovered that our "read a single object" method was incorrectly
setting query.checkCacheThenDB() for all ReadObjectQueries. This was brought to light
when we upgraded our production servers from 4 cores to 8. We immediatly started
experiencing very long response times under load.
We traced this down to the following stack: (TopLink version 10.1.3.1.0)
at java.lang.Object.wait(Native Method)
- waiting on <0x00002aab08fd26d8> (a oracle.toplink.internal.helper.ConcurrencyManager)
at java.lang.Object.wait(Object.java:474)
at oracle.toplink.internal.helper.ConcurrencyManager.acquireReadLock(ConcurrencyManager.java:179)
- locked <0x00002aab08fd26d8> (a oracle.toplink.internal.helper.ConcurrencyManager)
at oracle.toplink.internal.helper.ConcurrencyManager.checkReadLock(ConcurrencyManager.java:167)
at oracle.toplink.internal.identitymaps.CacheKey.checkReadLock(CacheKey.java:122)
at oracle.toplink.internal.identitymaps.IdentityMapKeyEnumeration.nextElement(IdentityMapKeyEnumeration.java:31)
at oracle.toplink.internal.identitymaps.IdentityMapManager.getFromIdentityMap(IdentityMapManager.java:530)
at oracle.toplink.internal.queryframework.ExpressionQueryMechanism.checkCacheForObject(ExpressionQueryMechanism.java:412)
at oracle.toplink.queryframework.ReadObjectQuery.checkEarlyReturnImpl(ReadObjectQuery.java:223)
at oracle.toplink.queryframework.ObjectLevelReadQuery.checkEarlyReturn(ObjectLevelReadQuery.java:504)
at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:564)
at oracle.toplink.queryframework.ObjectLevelReadQuery.execute(ObjectLevelReadQuery.java:779)
at oracle.toplink.queryframework.ReadObjectQuery.execute(ReadObjectQuery.java:388)
We moved the query back to the default, query.checkByPrimaryKey() and this issue went away.
The bottleneck seemed to stem from the read lock on the CacheKey from IdenityMapKeyEnumeration
public Object nextElement() {
if (this.nextKey == null) {
throw new NoSuchElementException("IdentityMapKeyEnumeration nextElement");
// CR#... Must check the read lock to avoid
// returning half built objects.
this.nextKey.checkReadLock();
return this.nextKey;
We had many threads that were having contention while searching the cache for a particular query.
From the stack we know that the contention was limited to one class. We've since refactored that code
not to use a query in that code path.
Question:
Armed with this better knowledge of how TopLink queries the cache, we do have a few objects that we
frequently read by something other than the primary key. A natural key, but not the oid.
We have some other caching mechanisms in place (JBoss TreeCache) to help eliminate queries to the DB
for these objects. But the TreeCache also tries to acquire a read lock when accessing the cache.
Presumably a read lock over the network to the cluster.
Is there anything that can be done about the read lock on CacheKey when querying the cache in a high load
situation?CheckCacheThenDatabase will check the entire cache for a match using a linear search. This can be efficient if the cache is very large. Typically it is more efficient to access the database if your cache is large and the field you are querying in the database is indexed in the table.
The cache concurrency was greatly improved in TopLink 11g/EclipseLink, so you may wish to try it out.
Supporting indexes in the TopLink/EclipseLink cache is something desirable (feel free to log the enhancement request on EclipseLink). You can simulate this to some degree using a named query and a query cache.
-- James : http://www.eclipselink.org -
Replacing / Compiling Database Triggers in a HA/High Load system
Hi there,
My collegue has just asked me if downtime needs to be scheduled to replace an After IUD Database trigger where I've made a minor change.
If this were a package or procedure, the answer would be an obvious yes, as I'd be wary of my users getting the dreaded: ORA-04068... State of Package has been disguarded.
What about when working with database triggers?
If the trigger is firing at the same time that I perform my Create or Replace Trigger DDL, will everything fall into a screaming heap?
Notes:
Oracle 10g R2 db.
High DML rates on the table that the After IUD Trigger is 'attached' to.
It's a near certainty that when the Create or Replace Trigger DDL runs, the trigger will be active at the time.
The Trigger is 'simple' in that it's use: is to call a DB package with some of the :new values as params.
+(I'm happy to rtfm - if someone can tell me where!!)+
Cheers -
Ron MarksIf this were a package or procedure, the answer would be an obvious yes, as I'd be wary of my users getting the dreaded: ORA-04068... State of Package has been disguarded.Not true. This exception is thrown only if sessions have some state represented in package variables. If there is no associated session state, then no exception would be thrown after recompile.
If the trigger is firing at the same time that I perform my Create or Replace Trigger DDL, will everything fall into a screaming heap?You'll wait - to lock an object in library cache which represents your trigger. Not sure if this would require a library cache lock on underlying table, but I would guess that it is required. BTW, locking a table would make no any sense: CREATE TRIGGER is a DDL, which means before it began it issues a COMMIT => all locks are released, and it is quite possible that a TM lock for CREATE TRIGGER won't be acquired since resource would be busy.
Oracle 11gR2 claims to address problems of application upgrades on a high-load environments with a feature called "Editions" (not a good name - try to find something about it via Google...) -
Hi,
I'm using ArchLinux 64bit, with KDE 4.3.4 on a sony vaio, everything work fine, but after some normal work I see that process X takes more then 90% of CPU and never slow down. Even if I closed all my application it stays at 90%. I don't know how to see which application could cause this.
As first impression it seems when I use samba adn move some file from my machine to a windows machine, but today it takes high load cpu without using samba, so I don't know what else do, any good advice?
thanks a lot
cesareHi thank you very much for your reply, I'm sorry to reply just now.
Anyway I have a Sony Vaio VGN.SR21M, using opensource driver xf86-video-radeonhd with hardware acc on. My graphics card is a Radeon3400HD
I used the closed driver till I switch to Xorg 1.7 and so I can't using it anymore so I switched to the free one.
Should I disable desktop effects?
Thanks again
Cesare
Last edited by cesare (2010-01-25 08:48:01) -
JAXB: NPE on high load in Coordinator.java:112
Hello,
I'm using JAXB 2.0 and when running high load tests I get NPE.
In my code I have a static marshaller (initialized in a static initializer) and the method which makes use of it is synchronized.
Once every few (~10) invocations of my method I get:
java.lang.NullPointerException
at com.sun.xml.bind.v2.runtime.Coordinator.popCoordinator(Coordinator.java:112)
at com.sun.xml.bind.v2.runtime.XMLSerializer.close(XMLSerializer.java:752)
at com.sun.xml.bind.v2.runtime.MarshallerImpl.write(MarshallerImpl.java:272)
at com.sun.xml.bind.v2.runtime.MarshallerImpl.marshal(MarshallerImpl.java:200)
at javax.xml.bind.helpers.AbstractMarshallerImpl.marshal(AbstractMarshallerImpl.java:70)
Any help...?
Thanks,
Zohar.Hello,
I'm using JAXB 2.0 and when running high load tests I get NPE.
In my code I have a static marshaller (initialized in a static initializer) and the method which makes use of it is synchronized.
Once every few (~10) invocations of my method I get:
java.lang.NullPointerException
at com.sun.xml.bind.v2.runtime.Coordinator.popCoordinator(Coordinator.java:112)
at com.sun.xml.bind.v2.runtime.XMLSerializer.close(XMLSerializer.java:752)
at com.sun.xml.bind.v2.runtime.MarshallerImpl.write(MarshallerImpl.java:272)
at com.sun.xml.bind.v2.runtime.MarshallerImpl.marshal(MarshallerImpl.java:200)
at javax.xml.bind.helpers.AbstractMarshallerImpl.marshal(AbstractMarshallerImpl.java:70)
Any help...?
Thanks,
Zohar. -
High-load sql statement using v$sql
Hi,
Can any one please tell me, how do we find high load sql statement and it's user from v$SQL view.
what is the query to find it.
Thank you!Hello,
You can run ADDM report and check its findings it will tell you tome stuff like the following:
Finding
67 SQL statements consuming significant database time were found.
40.7 Time spent on the CPU by the instance was responsible for a substantial part of database time.
20.7 Individual SQL statements responsible for significant user I/O wait were found.
13.7 Individual database segments responsible for significant user I/O wait were found.Kind regards
Mohamed Elazab -
One of 4 node RAC always have higher load averages and higher than others
Hello,
We have a 4 node rac, 9208 on linux 4. When viewing top, we noticed the same one node always have a higher load average than the other 3 nodes. Is this normal. Loan balance is working fine but this one node always have higher load average. This is the node where we do the rac installation. Thank you.I do not remember what is the default for clb_goal (client load balancing) for 9i but 10g is LONG.
check it
select clb_goal from dba_services where name = <service name>
you may have to change from LONG to SHORT OR SHORT to LONG depending your connection types.
dbms_service.MODIFY_SERVICE(‘<service>’,clb_goal=> dbms_service.CLB_GOAL_LONG);
Read the following article.
http://www.databasejournal.com/features/oracle/article.php/3659411/Oracle-RAC-Administration---Part-15-Connection-Load-Balancing-and-FAN.htm -
is ipad mini is capable to run high graphics and high loaded games with no lag and will not stuck while playing high graphics / loaded game ?
tell me i want your suggestions !is ipad mini is capable to run high graphics and high loaded games with no lag and will not stuck while playing high graphics / loaded game ?
tell me i want your suggestions !
Maybe you are looking for
-
I have read some of the forum topics that I hope can help me. I have iPhoto 2 and when I messed up my iBook OS 10.2.8, I lost the iPhoto ( about 2K pictures :-() Now i have the 'puter back but still missing the iPhoto. I have found Three(3) iPhoto Li
-
Extracting Audio from DVD/VCD?
Is this possible with FCE?
-
How to create ajax based tabs ..??
Hi all, How to create Ajax based Tabs (or Tab like) in a JSF page..? Any clues..? Thanks and regards, Jijo
-
According to everything I have read, the keyboard shortcut for sending a file or folder to the trash is Cmd-Delete. This does not work on my computer. The delete key functions as expected within applications, but does not seem to do anything in the F
-
I can not print any PDF files, I don;t understand why
I have an HP computer w/ windows 7 and also a officejet 4500 printer. All of a suden I can not print any PDF fiels? How do I fix?