Lenovo Easy Cam Won't work after Windows 10 install

I have a V570 Lenovo laptop on which I just installed Windows 10. After the install, I found that my camera no longer works -- it's the Lenovo Easy Cam. I tried driver updates. Apparently the drivers were downloaded but failed to install. I can't figure out HOW to get them to install. I tried the device manager. I also took a look with Lenovo Solutions. It says the camera is disabled, but it doesn't tell me how to re-enable it. I'm at a loss. How can I get my camera to work with Windows 10? Thanks.

Hi Swahili1,I have a Lenovo Ideapad Y570 and I have also recently upgraded from Windows 7 Professional to Windows 10. In fact I had the same problem as other persons i.e., the easy camera of my laptop was disable and I couldn't manage to update the drivers correctly and make it function. I did as you described, with the difference that in my case I couldn’t enable the camera from Device Manager. What I did is that I have only uninstalled the program of the easy camera going to: Control Panel\Programs\Programs and Features and then I have restarted my laptop. As you said most probably, Windows 10 detected the camera and installed the appropriate program and now my camera is functioning. Thanks a lot Swahili1.

Similar Messages

Lenovo EasyCam Won't work after Windows 10 install

I have a V570 Lenovo laptop on which I just installed Windows 10. After the install, I found that my camera no longer works -- it's the Lenovo Easy Cam. I tried driver updates. Apparently the drivers were downloaded but failed to install. I can't figure out HOW to get them to install. I tried the device manager. I also took a look with Lenovo Solutions. It says the camera is disabled, but it doesn't tell me how to re-enable it. I'm at a loss. How can I get my camera to work with Windows 10? Thanks.

Hi Swahili1,I have a Lenovo Ideapad Y570 and I have also recently upgraded from Windows 7 Professional to Windows 10. In fact I had the same problem as other persons i.e., the easy camera of my laptop was disable and I couldn't manage to update the drivers correctly and make it function. I did as you described, with the difference that in my case I couldn’t enable the camera from Device Manager. What I did is that I have only uninstalled the program of the easy camera going to: Control Panel\Programs\Programs and Features and then I have restarted my laptop. As you said most probably, Windows 10 detected the camera and installed the appropriate program and now my camera is functioning. Thanks a lot Swahili1.

Satellite A300D-15B - Webcam won't work after Windows 7 upgrade

My webcam doesnt work after Windows 7 upgrade. I have installed the drivers but still having no luck

Hi
The webcam is listed in device manager under the Imaging devices
There you should see USB Video Device.
If its not listed there, then I think that the device malfunctions or its disconnected.
The webcam is an usb device and its connected to USB controller.
I read in different threads that in some cases the cable could be loose and therefore the webcam would not be listed in device manager.
I such case the display lid needs to be disassembled and the cables should be checked.
In my opinion its a job for an technician.

Torch won't turn off and back camera won't work after dropping it in a pool. What can I do?

I put it in rice as soon as I got back, and left it for 36 hours as instructed by a website and friends. Ever since dropping it the torch hasn't turned off and the bac camera won't work.

Water and electronics do not mix well. Your device may not ever work properly again, and probably needs to be replaced. Unless you have the AppleCare Protection Plan Plus, then it will cost $199 USD to replace an iPhone 4S.
The rice trick works best if you leave it for at least 4-5 days, not 1.5 days. But even that is no guarantee.

[THUNDERBIRD] The hiperlinks won't work after new install

The hyperlinks won't work. Firefox was install after my hardrive was formatted since then the links won't work
Firefox is installed on windows XP 32 bit computer
Any ideas!
Martin Freeman

Hi John99
Yes the shortcut works fine both open & closed
Can I ask a question, who is AFAIK ?
Martin

Camera won't work after IOS 7 update

Ever since I updated to iOS 7 both cameras have stopped working,. I was reading up on it in a discussion and read a few promising steps to take to get my cams back working, from resets to backing up and restoring from backups after deleting all of my apps which can be deleted and suddenly my front camera works again
But still freezes up when I switch to the back camera . This seems to be directly caused by my updating to iOS 7
Can anyone tell me more about this problem, if it's common and what I can do
Thanks!!

Hello, lindseyyy_brookeee.
Thank you for visiting Apple Support Communities.
This article will help your troubleshoot the camera issue with your iPhone. See the section labeled Camera isn't functioning or has undesired image quality.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If the issue persists, see the last section labeled Issue not resolved.
Cheers,
Jason H.

Lenovo s500 ideapad won't start after windows 8.1 upgrade

Hello, our school is lending us a lenovo notebook to use in school for work.
I tried to upgrade the computer from windows 8 to windows 8.1.
After the update the computer it gives me a blackscreen on startup and after a restart it restores to windows 8.

I have the same problem with my S500
Lenovo and Microsoft both have no idea how to fix this.
Both said we just have to use 8 . But i really like to use 8 to the fullest, so I want to upgrade to 8.1

Widi won't work after windows 8 install

Hi,
I have a Portege R700-S1322W and I just recently downloaded windows 8. I'm trying to install WiDi (it worked before I upgraded to windows 8). I have downloaded all the most recent drivers listed (including 15.5.6.0 Intel® PROSet/Wireless WiFi) and ran the intel driver update utility (the driver I have installed is 8.15.10.2858 and it says "An Intel device was detected but your operating system is not supported by this utility. Please visit Download Center to look for available software."). when I try to install the most recent widi driver, 3.5.41.0, it says "this platform is not compatible with intel(R) Widi or the application is in use". I was successful in installing version 3.0.13.0 of the WiDi driver but when I try to run it there's a message "Intel My WiFi Technology not enabled. Restart the computer and try again", I already checked and My WiFi is enabled. Could you please help? is there any older drivers that i could run to allow my WiDi to work or is there anything I could do with my settings? Will you be coming out with any WiDi updates for my system?
Thanks

Apparently you didn't check the Toshiba Windows 8 Upgrade Assistant. That machine is not supported for Windows 8 so Toshiba is very unlikely to issue a WiDi driver for it.
C.B.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Facetime won't work after Lion install... No mic from isight

After installing Lion on my 2010 mac mini, Facetime won't recognize my firewire isight mic. Video comes in from the isight, but it doesn't find it as an audio input choice. System preferences recognizes it and hears your voice, but not Facetime. You can Facetime with someone but they won't hear you. Skype still works fine on Lion using the same isight (audio &video).... tried resetting PRAM but still nothing... C'mon Apple.. Lion and Facetime need a fix here!! I've read others are experiencing same issue!!

In Lion, neither the previous version of FaceTime Version 1.1 (258) from OS X 10.7.1 nor the current Version 1.1.1 (262) from OS X 10.7.2 can use external iSight's Firewire mic.
The firewire iSight camera works with Lion's FaceTime, but the iSight's Firewire mic is not available for selection in FaceTime > Video. One alternative is to use another video chat app such as iChat or Skype. Both iChat and Skype can use external iSight's mic in Lion (and earlier Mac OS versions.)
More info and workaround suggestions are available here: http://discussions.apple.com/message/16216276
BTW - You are NOT addressing Apple here: http://discussions.apple.com/static/apple/tutorial/tou.html
We are just users like you trying to help others. You can send feedback directly to Apple via http://www.apple.com/feedback/macosx.html
You will not get a response, but you can be certain that the responsible Apple people will see your input for consideration in FaceTime product development.
Message was edited by: EZ Jim

Username and Password won't work after Archive & Install...?

Can someone help me out here. I had to do an Archive and install on my sisters iMac G4 this evening, for Tiger OSX. She was getting continual Kernel Panics and could not boot to her desktop even once. So I did the Archive and Intsall, but after 2.5 hours and using both Disc 1 and Disc 2 for the process (like it had asked for)...and it all finished, a welcome screen pops up after the OS launches prompting me to enter the computer name, and password. We have this information saved, and always have, but the iBook is not accepting them?? Any thoughts or suggestions on what we should do next? The options I have on this screen are (sleep, restart, shutdown, or login...with the name and password fields above) Thanks everyone. Any help would be much appreciated.
Sincerely,
Smartmediaman

I did check those options to preserve the users and network prefs. Just put in the install disc 1 and ran change password, but the only option in the drop down was for the system administrator (root), and I put in a new password, and confirmed it, then...rebooted to desktop and same window popped up prompting me to enter the computer's username and password, and still...nothing worked. Any other ideas folks? Thanks,
Smartmediaman

Boot Camp: Mac Pro won't start after Windows install

After installing Boot Camp on a Mac Pro dual 2.66 (firmware updated), XP installer went through installation & copying files, then restarted. Went to a black screen with white Windows-style text that said something along the lines of "XP cannot start from this CD, press any key to restart." Totally unresponsive, held down power to restart. Will no longer power up. Have reset the SMC without any effect. Makes a brief sound when trying to start, but does not actually start up.
Is there any known power issue that I might be able to solve myself, or is the supply likely blown?
Mac Pro Mac OS X (10.4.8)

I put Vista on its own dedicated drive, 64GB Vista, the rest as FAT32 to make it easier to share files. I had to remove the OS X drives in order to allow Windows/Vista to install. Once installed, had a black screen and some blue crash screen, until I ran the BootCamp driver updates.
I would try unplugging your drive(s) first and see if you boot from Tiger Installer DVD - or better, boot Apple Hardware Test (hold down "d" on startup from Install Disk #1).

Camera Flash not working after IOS7 Install

Hello. I installed iOS7 on my iPhone 4 last night. I had a Flashlight App on the phone prior to the upgrade, which now has a built in Flashlight utility. The probelm is, I cannot get the flashlight to turn on at all now. Not through either app and not even with the camera. I tried deleting the Flashlight App then restarting the phone, no change. Has anyone else ran ito this problem yet? Are there any suggestions for a fix? I already made a Genius Bar appointment for Sunday, just in case I cannot get this fixed.
Thanks

I have a resolution update for this: Delete any third party flashlight apps on your phone. Perform a backup on your phone. Restore the phone to factory settings then restore the phone from your backup. After doing that, the flashlight utility on the menu and the photo flash on my phone started working again.
I was pretty sure this was a software issue but I took the phone into an Apple store over the weekend. They did the factory reset at the store then checked the phone for hardware issues, none were found. They ordered a replacment phone for me which I will call to cancel today. When I got home and restored the phone from my backup, I discovered the LED was working again.
Hope this helps.

Fingerprint Software won't work after re-installing

I have uninstalled and re-installed the Fingerprint Reader, version 3.2.0.341 - 4/20/09. When I try to enroll a fingerprint, I get the message from "Fingerprint Enrollment: FPApp.exe - Unable To Locate Component" saying "This application has failed to start because css_banner.dll was not found. Re-installing the application may fix this problem."
I have re-installed, choosing repair, but I still get the error. However, I see css_banner.dll in \Program Files\Lenovo\Client Security Solution.
How can I fix this problem?
Update: I uninstalled version 3.2.0.341 and installed version 3.2.0.116. I have the same problem.
Message Edited by mhedstrom on 05-13-2009 11:38 AM
Solved!
Go to Solution.

I've solved the problem: I had to repair the Client Security Solution.
I noticed that if I tried to open Client Security Solution, I got a similar error about css_banner.dll being missing, followed by a message that CSSLauncher.exe had encountered an error and would close. So I decided that since the css_banner.dll is part of Client Security Solution, it made sense to try to reinstall or repair this application. I downloaded version 8.2 from Drivers and Software and it offered a 'repair' choice. After doing the repair, my Fingerprint Reader application worked. I upgraded the Fingerprint Reader back to the new 4/20/09 3.2.0.341 version and that one seems to be working fine.

Spotlight won't work after clean install

I did a clean install of a 10-seat licence of 10.5 server on the primary partition of a Mac Mini. Logged in with the admin account (the only account), I cannot get Spotlight to find anything at all (even searching for something that it should find, like "Safari" just gets me "No Results Found").
I've done software updates, re-booted, and repaired permissions. Any ideas?
(On a side-note, I'm trying to find where the Weblog server stores media files; so if anyone can tell me that I'd appreciate it).

I can't believe it , I've finally got Leopard on my brand new iMac, which was supposed to come with it pre-installed! A friend who has Leapord came over and saw my screen and icons and said, 'that doesn't look like Leopard, you should reinstall.' We did, and now everything works great (including printer, Bluetooth A2DP and Spotlight, which hadn't been working prior). Airport works, too, but it was working before thanks to the WPA fix. Somehow my Intel iMac, purchased in December from the San Francisco/Marina Mac Store, came with a faulty OS installation. I wasted soooo much time trying to fix it when I just needed to reinstall (w/o erasing my HD). Maybe this can help others having similar problems. Happy Mac-ing!

Facebook games won't work after Maverick install on MacBook Pro

I just installed Maverick on my MacBook Pro, it is a mid 2009 model. Ever since when I get on Facebook with Firefox, Chrome, or Safari, I can"t get any of the games to load. Everything worked just fine last night before the install, but now I am at a loss as what to do to fix this problem, short of wiping the HD and starting back over in Snow Leopard.

I just installed Maverick on my MacBook Pro, it is a mid 2009 model. Ever since when I get on Facebook with Firefox, Chrome, or Safari, I can"t get any of the games to load. Everything worked just fine last night before the install, but now I am at a loss as what to do to fix this problem, short of wiping the HD and starting back over in Snow Leopard.

Lenovo Easy Cam Won't work after Windows 10 install

Similar Messages

Maybe you are looking for