Lenovo G450 - DVD-ROM problem

Hi!
I got a lenoo G450 laptop wth a Windows 7 OS installed on it. The problem is that sometimes my DVD-ROM is not detected even i reboot the system.
What's suppose to be the problem here?
Please help
Thanks
Jessie Boy

Uttam Welcome to the forums
Take it to the service center,its the best option for you.If i am not mistaken there is an authorized Lenovo service center in the CTC complex near Secunderabad....
PS : Please donot send in PM's regarding help,instead post your queries in the forums
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Similar Messages

Lenovo G550 DVD writer problem.

Heya...i'v a Lenovo G550 with Windows XP SP3. The problem here is that the DVD reads all the DVDs but does not write any. It doesnt even give an error for not writing. I have Nero 9 and when i try to burn a DVD with that it shows burn process started and stuff and it ends successfully. But when i put back the DVD to check if its written properly it shows me a blank DVD. How can i solve this problem?? The CD and DVD drivers are upto date. Please help me with this problem.

take a look at this thread, but possible your dvd rom is about to die.

G3 Pismo DVD-ROM Problem

The DVD-ROM (Model M7931, Apple P/N 661-2244) in my G3 Pismo is not working properly. When a CD or DVD is input the drive spins, but makes slow & fast spin speed noises. Then it quits without reading the CD or DVD. The lens is clean & the drive appears in the System Profiler. When I replace the DVD-ROM drive with a CD-ROM drive (M73888), the CD drive reads a CD, so apparently the electronics within the G3 are OK.
I've read in forums that these drive have been problematic. Has anyone attempted a repair of the drive or know what might be the problem? The Service Manual troubleshooting doesn't suggest much, except replace. Since the drive is inop & possibly need to be trashed, I'm not adverse to trying to disassemble & attempt a repair. I can continue to use the CD-ROM drive.
I doubt that I will replace the DVD-ROM because used ones appear to cost $50+ & new ones about $100+. Is there an alternate (cheaper $) PC drive that could be used?
 Cheers, Tom

It's fixed. WD40 to the rescue.
I was considering swapping the Apple drive with a PC drive (see first link below, Plan B), but thought I would do a little troubleshooting (Plan A).
I opened the drive tray from it's enclosure. Using a #0 jeweler's Phillips screwdriver, I removed the metal cover plate screws (5). Then removed the screws (3) holding the motor/plate assembly. Carefully lifted the motor assembly upward at about a 45 degree angle (flex cables were attached). Looking at the side, there was about a 1mm gap between the motor & the plate. Using the plastic nozzle on a can of WD40, sprayed a small amount of lubricant. Let it sit for a few minutes & rotated the spindle. Reassembled everything.
I inserted a CD, didn't hear any spinning noise & the CD icon appeared on the screen. Repeated with a DVD. Both were being read. Yea!!!!!!!!!!!!
Found these helpful links when searching for a possible solution.
Replacing or Upgrading the Optical Drive in Your PowerBook G3 or 1400
http://lowendmac.com/rivera/06/0124.html
Replacement Pismo Drives
http://forums.macnn.com/69/powerbook-and-macbook-pro/223617/a-list-replacement-p ismo-optical/
Repairing or Upgrading of Optical Drives (CD,DVD,MO) for Laptops and Notebooks
http://repair4laptop.org/notebookoptical_drive_cd_dvdmo.html
 Cheers, Tom

Dvd Rom Problem

Hi,
I have a Ibm Thinkpad T23 Series Laptop where I bought from Canada last year. When I was in Canada I am able to access any of the CDs/Dvds through my Thinkpad's Dvd rom. My Dvd Rom would be TOSHIBA - DVD 8X MODEL NO : SD-C2512.
I have recently came to India, When I tried to play any CDs/DVDs over here I am not able to access. I brought one Dvd from Canada, When I play that Dvd its playing. When I tried to access any of the Indian Movies or softwares which is available with me that I am not able to access. I believe there is no problem in my Dvd Rom and I am not able to understand what might be the problem. Appreciate if any one could advice.
Raknahs
I am able to access all the hardware in the system includes DVD Rom

Firstly are you using pirated discs in India????

Embedding Real Media off a DVD-ROM -- problems in Safari

Safari won't play embedded Real Media files off of a DVD-ROM. Description:
I'm trying to embed Real Media files in web pages distributed on a DVD-ROM. It works fine in Firefox (and in Windows), but in Safari, it doesn't work. It takes a long time for the embedded video to even start playing in Safari (about 2 minutes), and then it consistently crashes Safari less than a minute after that. Sometimes it doesn't play at all, but after a few minutes shows a "resource unavailable" error in the Activity window instead. It works perfectly if the files are on the hard drive, or if I'm streaming them over the Internet through Helix Server, but they just won't work when they're embedded off of the DVD-ROM through Safari.
I've tried several Intel and PowerPC machines, all running the latest OS and RealPlayer versions, but I can't get it to work anywhere. I thought it could be disc or drive speed issues, but like I said, even Firefox on these same Macs plays the embedded video with no problems, and of course RealPlayer can open them directly off the disc just fine too. Safari seems to be standing in the way of my universal browser compatibility!
I've contacted Real about this too, but I haven't received a response. Any ideas? Thanks -- Jim

Also, for the embedded Real Media code, I'm essentially just using the code generated here:
http://cit.ucsf.edu/embedmedia/step1.php
(I can't imagine this matters much, since it works in all other browsers and all other instances other than Safari accessing the DVD-ROM)

P10: DVD / DVD-ROM Problems

Hi guys!
Hope you can help, probably something stupid I have overlooked. I Have the P10 series with a Combo DVD-ROM type SD-R2412. I've recently put a fresh install of the op system on (XP) using the system restore disks. Since, my cd drive reads normal cd's and DVD films but not DVD ROMS such a games on DVD-ROM. Any ideas? Windows XP sees it as a DVD/CD-ROM drive but that's about it.
Thanks in advance for any help

Hi
I am not sure but I think that your unit has a DVD-RAM drive. I have the same drive in my Satellite and everything works perfect. I can really dont understand how something like that possible is especially after OS reinstallation with Recovery CD.
I dont know if you use the original games from store or some self burned. Try to use many different DVD medias to find out which one makes problem.

Lenovo y510p DVD burner problems

HI
I have problem with Lenovo y510p DVD, it does not read blank DVDs.
I have tried difeerent kind but it just stopped to read them, I just hear sound form dvd tray and that is it.
I see that I have: mat**bleep**a dvd ram uj8db
Is there a firmware update or something for it?
thanks

Dear Mehnihma
Welcome in lenovo community
If this is the first time to face the issue as it was working before so the System restore will be the best solution .
Restore your system to the nearest restore point when the machine was working fine before
Let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

DVD-ROM problem reloaded

HI everybody. I have posted this issue before, but got no solution for it. So, I'm trying again.
Whenever I insert a CD into my DVD-ROM drive the system gets locked. The drive's light lights up a few times, but everything gets locked, including the mouse pointer. Then after a few minutes the mouse pointer is released and the system can be used again. The DVD-ROM drive, however, is never accessed at all.
When the above useless processing is finished the mouse pointer is released, and I can use the system - as long as I don't try to access the DVD-ROM drive again. If I do try to access the drive, everything gets locked up again as explained in the above paragraph.
Would you guys be able to help me figure this out?

ttreaders:
I have had problems since I began installing nVidia IDE drivers. Whenever I install those, the problem repeats itself. With the original MS WinXP drivers I did not have it. However I get a lot more performance from the system with the newest nVidia IDE drivers. So ...
G_man:
Thanks for your "moral" support. Your description of the problem is excellent. It seems exactly the same as mine. This drive is a Samsung SD-616B 16x DVD-ROM that came with my Dell 8200 system. I took it out of the Dell system and installed in the new one. The FW version is F006. I bought this Dell 8200 in November 2001. I wouldn't think it's an old drive though. Regarding round cables, I do have them, so I might try using flat ones sometime in the near future, and see if it works better. Also, please see my reply to archermoo below.
Archermoo:
I have disabled UDMA mode in Bios and driver, and ... IT WORKS!!! Alleluiah. The system can access the drive and is not hanging any more. .
Now, my question to you guys is: what am I missing by changing the DVD-ROM drive's access mode to PIO?

G550 DVD Rom Problem

Need help
I installed a few programs after rebooting the DVD rom is no longer in my computer.
I see it in Device manager with? in yellow.
I tried to unistall it and then reboot so it finds new hardware.
It found new hardware it installs it but then window pops up and tells me that it wouldn't work properly.
Im using Window XP pro.

Try to have a look in the registry.Open the registry and navigate to this Key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
If there are Entries like "Upperfilters" oder "LowersFilters" delete them, close the registry and restart your notebook. This worked for me several times on multiple windows xp machines.

SCSI DVD-ROM problems

Hi
I recently applied patch 118844-27. All went well except that now when I boot I get a load of SCSI errors (bus timeout etc etc. etc.), which prevents the system from starting (well, I've never waited long enough to see if it gets past all of the timeouts, but it seems to be timing out on all devices).
If I unplug my Toshiba SD-M1201 DVD_ROM then I can boot normally. The same PC has worked OK for a good few years, going back to Solaris 7. This looks like a regression to me.
Any ideas for a workaround, or is there going to be a patch to fix this?
A+
Paul

No replies, but I can add a little.
If I leave the DVD plugged in, but disable it in the SCSI BIOS, then I can use it (with the /dev entries that were created prior to 118844-27). So the problem seems to be limited to newboot and the detection of hardware, not to anything more fundamentally related to the SCSI layers.
Paul

DVD-Rom problems!

I have big problems with one of my two dvdunits dissapearing sporadically.
The one that dissapear is a reader and the other one a recorder.
The are connected on separate idechannels and jumpered as masters.
I have a satadisk as boot device running Windows XP.
I have tried different settings in BIOS regarding p-ata and s-ata without success.

full list of hardware and psu max amps

Super CD DVD ROM Problem in 1000-1140tu notebook....

hey guys .... i need a favour to ask .. i'm using 1140tu note book but after upgrading by this formware update (PLDS Optical Drive Firmware Update) My ROm is not identifying Cds .. any help plz ????
This question was solved.
View Solution.

Hello NaughtyDescent. I understand your computer is having trouble reading discs.
Try using this Microsoft utility to resolve your issue.
Let me know the result. Have a good day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Satellite A200-23U - DVD-ROM problem after firmware update

Hi! I have A200-23U (TSSPcorp CDDVDW TS-L632H). I update firmare first to TO02, then to TO03. None errors was shown. After reboot my device is locked (doesn't open/eject by button or by any software) and ImgBurn (for example) can't find any writers. In system devices now it's shown as:
IDE\CDROMTSSTCORP_CDDVDW_TS-L632H________________*BOOT*____\5&1AC5D6C0&0&0.0.0 (I think there must be *TO03* but no *BOOT*)
What's wrong and how can i fix it?
PS Sorry for my bad english .)

I won!! TSL632H_TO??.exe - it's just SFX-archive that can be unpacked by WinRAR (for example). And then we got SFDNWIN.exe program and firmware dump file (*.bin) separately, which can be used to upload firmware without any checks (compatible/non compatible).
*WARNING!!! NO ANY WARRANTIES!!!*

Lenovo G450 Standby/Hibernation Problem

Hi, I've been having the same problem as http://forums.lenovo.com/t5/Lenovo-3000-and-Value-line/G460-standby-hibernation-problem/td-p/216132 , my Lenovo G450 came with a blank screen when I tried to turn it on from hibernation today. I've tried removing the battery, running it on power only, or both, but none of them seem to get it out of the blank screen state. It does come back out of the state after a whole week of being switched off, but being a busy student overseas, I find this to be quite the hindrance to my studies and recreations.
I sent it to the Lenovo service centre in Singapore in April, but they returned it to me saying it doesn't have any problems.
I also have the heat problem stated in http://forums.lenovo.com/t5/Lenovo-3000-and-Value-line/G450-gets-too-hot-shuts-down/td-p/200020 despite the fact that I actually have a STAND AIR CONDITIONER pointed at the exhaust.
Would appreciate a fast reply. Thanks.
Also, please don't suggest that I install the BIOS update, since I can't even get the system to start. Indicator lights come up, touch volume control works, DVD drive bay opens, but nothing else.

Some other things to try:
Make sure you post and add your input to the two threads you linked to.
A couple hardware things, these should not affect warranty, as you are allowed
to change memory and hard drive. I don't know how much of this you know already:
Do the "discharge procedure" again first.
Reseat memory modules. (Unplug, remove battery, touch a grounded metal object,
remove memory chips, and replace one at a time. Try it with just one first to eliminate
memory failure. Then the other by itself, then both.)
Remove hard drive and see if you can boot to bios (F2 key on boot
Hard drive is under a plate on bottom, just carefully slide it back with the tab,
and remove, holding it by the sides.
If these do not help, I guess it must be returned to service again?
I am surprised they found no problem!

DVD-ROM Unit problem

If I try to load a DVD disc it'll only make some loud breath voice which falls after 2 seconds and it periodically repeats until I take out the disc. Here's the information I found in msinfo32 (I translate it from my motherlanguage to english so it's probably not 100% correct):
Unit F:
Description Unit CD-ROM
Medium Loaded No
Medium Type DVD Writer
Name hp DVD RW AD-7721H
Manufacturer (Standard unit CD-ROM)
State OK
Transmission rate -1.00 kB/s
Target ID device SCSI 1
ID device PNP IDE\CDROMHP_DVD_RW_AD-7721H______________________1.80____\4&3A93AF2C&0&0.1.0
Driver c:\windows\system32\drivers\cdrom.sys (6.1.7601.17514, 144,00 kB (147 456 bajtů), 18.8.2012 17:12)
Could you please tell me if it's a software disruption or the DVD ROM is simply damaged.

Hi,
The first thing I'd suggest is to eject the drive tray and use a soft material like cotton to gently clean the lens.
Check if this has made any difference.
If not, try the automated fixit from Microsoft on the link below.
Windows 7
Vista
Check if the drive is now working.
If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Lenovo G450 - DVD-ROM problem

Similar Messages

Maybe you are looking for