Lenovo G480 Problem: I cant Create a new Drive

Hi everyone.. so my my laptop is a Lenovo G480 intel i3
4GB ram
My operating System when i bought this was Windows 7 Home Basic.
So my problem is that my Local Disk C is 420 GB while my Local Disk D is only 25.4 GB
So I want my disk D to have more space (atleast 150GB) so I could store all my Installers, Games, Music and Videos in there, but when i try to transfer the memory from C to D, it wont. I shrink 150GB from my Local Disk C and when i clicked on Local Disk D the option Extend Volume is not available. So i tried to create a new drive instead.. I right click the 150GB unallocated space and the only option available is Create Simple Drive (i think). then i agreed at all the options but in the end it would say Not Enough Space.
I dont understand. So I tried changing the Operating System to Win7 Ultimate but same problem. Please Help Me I dont know what to do (and by the way it can also not be done when im installing Win7. The option Extend is also not present there or Create new Drive)
Solved!
Go to Solution.

you need not to go to diskmgmt.msc as you have already messed up enough with your HDD. now wipe out you system reserved, C and D partition (I mean all created partitions leaving the OEM reserved partition viz "LENOVO_PART") booting from windows 7 DVD. At one page there will be drive option when you see your all partitions. click that "Drive Option" and now delete one by one all partitions leaving "lenovo_part" one untouched.
now create your required partitions of your size. system reserved partition of 100 MB will be automatically created when you create your first (C) drive.

Similar Messages

Upgraded to OS X 10.9 and now cannot connect to Canoscan LIDE 90 Scanner. Cant find a new driver anywhere. Any ideas??

I have upgraded to OS X 10.9 and now I cannot connect to my Canoscan LIDE 90 Scanner. Cant find a new driver anywhere. Any ideas??

Like Dan White, I have found that I can still run the Lide 90 under Mavericks. As Dan says, the buttons on the front of the scanner don't work but I rarely if ever used them.
I have just tested the scanner using Acrobat Pro and it loads up the Scangear software to capture the scan, with no problems at all. I didn't have to reinstall anything as it was all there already and working in Mountain Lion. Photoshop CS 5.1 is different; it does not recognise the scanner, presumably because it can't find a TWAIN driver for it. Image Capture does not recognise the scanner either, but I don't have the latest (10.8) Canon MP Explorer and Explorer Opener software installed.

Creating a new Driver/DataSource in Visual Administrator

Hello,
I have been struggling to create a Data Source for a SQL Server DB in Visual Admin. I did the following.
1) Created a new Driver MSSQL, added to it msutil.jar, mssqlserver.jar and msbase.jar.
2) Created a new data source gave it a name, description
- Selected the MSSQL driver which I just created
- JDBC Version 1.x
- Driver class:
com.microsoft.jdbc.sqlserver.SQLServerDriver.class
- Database URL:
jdbc:microsoft:sqlserver://xxx.xxx.xx.xx:1433;databaseName=TestDB
3)Tried both Open SQL and Vendor SQL as database engines.
4) Gave the appropriate user id and password
With the above configuration when I entered a SQL Statement in the 'DB Initialization' tab and executed it, I got a SQL Server Driver Class not found exception.
My second configuration was to use the JDBC Version 2.0
with the following settings:
1) Use the same MSSQL driver which I created
2) JDBC Version 2.0
3) Object Factory: com.microsoft.jdbcx.sqlServer.SQLServerDataSourceFactory
4) DataSource Type: ConnectionPoolDataSource
5) CPDS classname: com.microsoft.jdbcx.sqlServer.SQLServerDataSource
6) Gave the required key, values in the 'Additional' Tab
7) Chose Vendor SQL as the SQL Engine.
With the second configuration I can connect and talk to the database.
Why would I not be able to connect to the DB in my first configuration? Are there any other configuration steps I am missing for using the JDBC 1.0?
Thanks,
Asheesh

If you are trying to create a new DBPool then you can use the OSS note 706216. This describes the method of adding the connection pools using the commands in the telnet console
I hope this helps
D

Cant create a new connection with new install of developer tools

I just installed the latest ODP.NET and developer tools in hopes of using EF in my next project. However I cant seem to make a new connection in VS.
I get "tns:could not resolve the connect identifier specified" I can however connect using the supplied parameters in plsql developer.
[Edited to add]
I've tried the install on a 32 bit machine and it works fine. The comment above refers to a windows 7 64 bit machine. I loaded the 32 bit version of the tools and ODAC. What did I miss?
Edited by: user12143426 on Mar 12, 2012 1:18 PM

http://www.oracle.com/technetwork/topics/dotnet/odt-faq-085407.html#ORA-12154:_TNS:could_not_resolve_the

Why cant create a new text on my iphone 4?

when I go to my messages and try to start a new text it goes back to home screen. has this happened to anyone before? what can I do?

The same things happened to me this morning and I just don't know what to do. Did you figure out how to fix it?

I cant create a new hard disk partition in my macbook pro 15 inch

hi guys when i go to my disk utility my main hard give me results like this
its showing capacity 499gb but only remaining 10mb now please watch second image
now tell me whats happening with my mac thanks alot in advance any advice will be appreciated thanks

Did you click on PARTITION?
Ciao.

Problem of restore data in new drive

I bought new hard drive with the same size of the old one .Making a USB recovery driveFollowing the instructions of resetting windows in a blank hard drive in lenovo support site_____The problem is the reset fails if I chose (fully clean the drive _ stop after 2%) or (just remove my files _ stop after 85%) I get a message that the resetting process has a problem

If it doesn't then it has been added to the exempt list
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Saving a file in Photoshop creates a new drive in LR - huh?

I am completely stumped on this.
When in LR2, I right click a raw file and have it edit it in photoshop cs3. The image opens in PS. Now when I save it, either just by closing and having it save it automatically, or if I specify where I want it to be saved (and I want it to be saved in the same folder as my raw files), it's creating another drive area in LR.
Please look at this image to see:
http://www.allizdog.com/temp/LR-OddFolderThing.jpg
You can see that I have my e: drive with all it's photo folders in it, and I have a folder selected that contains the file I edited. After I saved the file in PS, the second e: panel at the bottom appears and the PSD image file is in there, but it's not in the upper e: folder where I wanted it. Why is it creating this second thing?
So, if I syncronize the folder I was originally working in, the PSD will show up where I wanted to, but now I have this second e: thing that I now have to delete.
What's up with that?

This and other exporting to CS3 problems are discussed in depth in this thread:
http://www.adobeforums.com/webx/.59b5f883
but to answer your question--so far no one has reported a problem when deleting the 'ghost' folder.

Cant Create Profile in 5230

I Purchased a 5230 a few months ago.
The Problem with the phone is that I cant Create a new profile.
Updated the software.
And Tried everything I know.
Still Cant Create a New Profile.
Please suggest solutions.

I did some more testing with my friend's phone, I even persuaded her to let me update it (now on 21.0.004), still no problems creating profiles.
One thing to try, though I'm 50/50 whether I think it is going to help: backup your phone contents again, then reformat it using hte code *#7370# - the phone will ask you to confirm the reset then enter the lock code, which is 12345 if you haven't set a personal code, then shut down and restart. Once complete, try to create a profile before you restore your backup - if it works, then there could have been some corrupt data in your settings data preventing this from working, in which case omit settings from from the resotration when you restore the backup.
If it still doesn't work, it could be an issue with your phone's specific variant of the software (this will vary according to region of the world and network operator), in which case all you would be able to do is report the issue to Nokia via the "contact us" link. Be sure to give them the product code of your phone (this is on the label in the battery compartment, usually a 7-digit code beginning 05).

Problem instaling SO on a new HD

Hello
I've just bought a new hd to my HP mini , installed it , and started instaling the SO win7 from a usb drive but after the systems formats the hd says it cant create a new system partition or locate an existing system partition , but there are at least 2 created there with the same usb win 7 , need help
best regards to all

Hi
When you start from the USB you need to do a custom install of Windows 7 , when you are promted to install delete any partitions that are active then click install . That should deal with the partition problem , have you personaly created the partitions or were they already created on the new drive ?????
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

I cant create an icloud apple account

I want to use iCloud for both my Mac Mini and iPhone, but the hardware themselves are not related to my problem: I can't create an iCloud account.
1 - I know my itunes/app store apple ID is not the same as an icloud ID (an iCloud id is an actual email address)
2 - apparently both my personal email addresses are in use (so i cant create a new account)
3 - I click "forgot password" when I try and login using my personal email address and it says it emailed me the password. I have tried this several times and it never sends me an email (they are both gmail accounts and yes, I checked the spam box).
How can I create an iCloud account?
My only guess at the problem is that I have been a Mac user since pre-internet and I am sure I used my addresses for purchases and accounts starting a long time ago.

dalidrama wrote:
1 - I know my itunes/app store apple ID is not the same as an icloud ID (an iCloud id is an actual email address)
You can use your current AppleID to create an iCloud account:
http://support.apple.com/kb/HT4436
You are not getting the email for the password reset because the email you are currently using is not the same as the recovery email you set in your profile settings when you first created the AppleID/iTunes account. You will have to try and remeber what email you used as the recovery address.

About creating a new source system on BW pointing to an Oracle database

hi friends
i m facing problems when i
creating a new source system on BW in AIX pointing to an Oracle database, our bw oracle use 10idatabase ,and we want to connet to 9idatabase(Windows) to get data for BW
(1.)     in /oracle/P01/102_64/network/admin tnsnames.ora I hava add
SJPT =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 68.16.211.177)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = SJPT)
(2) and in etc/hosts I hava add
68.16.211.177 SJPT
(3) in p01adm> tnsping SJPT it is OK
(4)but when i
in BW RSA1 DATA SOURCE
create db connect:
DBMS: ORA
USER NAME: SAP
DB PASSWORD: SAP
[email protected]
i t give me the error message :
ORA-12154: TNS:could not resolve the connect identifier
please help me

HI,my trans.log file is
4 ETW000 R3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 13.11.2007 - 10:16:48
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Tue Nov 13 10:16:48 2007                              81 0.000081
4 ETW000 [dev trc     ,00000] db_con_init called                                    29 0.000110
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                             50 0.000160
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/P01/SYS/exe/run/dboraslib.o' ...
4 ETW000                                                                              43 0.000203
4 ETW000 [dev trc     ,00000] load shared library (/usr/sap/P01/SYS/exe/run/dboraslib.o), hdl 0
4 ETW000                                                                           13346 0.013549
4 ETW000 [dev trc     ,00000] Library '/usr/sap/P01/SYS/exe/run/dboraslib.o' loaded
4 ETW000                                                                              32 0.013581
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000                                                                              35 0.013616
4 ETW000 [dev trc     ,00000] Version of '/usr/sap/P01/SYS/exe/run/dboraslib.o' is "700.08", patchlevel (0.46)
4 ETW000                                                                              53 0.013669
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000                                                                              34 0.013703
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000                                                                              53 0.013756
4 ETW000 [dev trc     ,00000] New connection 0 created                              23 0.013779
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              39 0.013818
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         45 0.013863
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              32 0.013895
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              37 0.013932
4 ETW000 [dev trc     ,00000] Got LIBPATH=/usr/lib:/lib:/usr/sap/P01/SYS/exe/run:/oracle/P01/102_64/lib from environment
4 ETW000                                                                             325 0.014257
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                         47 0.014304
4 ETW000 [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8          3234 0.017538
4 ETW000 [dev trc     ,00000] Logon as OPS$-user to get SAPSR3's password           28 0.017566
4 ETW000 [dev trc     ,00000] Connecting as /@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000                                                                              34 0.017600
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              35 0.017635
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
4 ETW000                                                                              36 0.017671
4 ETW000 [dev trc     ,00000] Allocating service context handle for con_hdl=0       37 0.017708
4 ETW000 [dev trc     ,00000] Allocating server context handle                      24 0.017732
4 ETW000 [dev trc     ,00000] Attaching to DB Server P01 (con_hdl=0,svchp=0x110f94398,svrhp=0x110fa6158)
4 ETW000                                                                              72 0.017804
4 ETW000 [dev trc     ,00000] Assigning server context 0x110fa6158 to service context 0x110f94398
4 ETW000                                                                           36191 0.053995
4 ETW000 [dev trc     ,00000] Allocating user session handle                        73 0.054068
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
4 ETW000                                                                              43 0.054111
4 ETW000 [dev trc     ,00000] Assigning user session 0x110f937a0 to service context 0x110f94398
4 ETW000                                                                           10613 0.064724
4 ETW000 [dev trc     ,00000] Now '/@P01' is connected (con_hdl 0, nls_hdl 0).
4 ETW000                                                                             964 0.065688
4 ETW000 [dbsloci.    ,00000] *** ERROR => ORA-942 when accessing table SAPUSER
4 ETW000                                                                            1183 0.066871
4 ETW000 [dev trc     ,00000] Disconnecting from connection 0 ...                   73 0.066944
4 ETW000 [dev trc     ,00000] Rolling back transaction ...                          28 0.066972
4 ETW000 [dev trc     ,00000] Closing user session (con_hdl=0,svchp=0x110f94398,usrhp=0x110f937a0)
4 ETW000                                                                             146 0.067118
4 ETW000 [dev trc     ,00000] Now I'm disconnected from ORACLE                     409 0.067527
4 ETW000 [dev trc     ,00000] Try to connect with default password                  23 0.067550
4 ETW000 [dev trc     ,00000] Connecting as SAPSR3/<pwd>@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000                                                                              34 0.067584
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              36 0.067620
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
4 ETW000                                                                              36 0.067656
4 ETW000 [dev trc     ,00000] Assigning username to user session 0x110f937a0        22 0.067678
4 ETW000 [dev trc     ,00000] Assigning password to user session 0x110f937a0        41 0.067719
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
4 ETW000                                                                              37 0.067756
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000                                                                           33690 0.101446
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              36 0.101482
4 ETW000 [dblink      ,00431] ***LOG BY2=>sql error 1017   performing CON [dblink#3 @ 431]
4 ETW000                                                                             122 0.101604
4 ETW000 [dblink      ,00431] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#3 @ 431]
4 ETW000                                                                              34 0.101638
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'P01'"

Prob creating a new structured data type

I am trying to create a new structured data type to see it in data type diagram. When i try to right click on structured data type in DATA TYPES, i cant see any option like new structured data type etc. But this is working for distinct as well collection data types but not for structured.
By default, we are getting SDO_geometry structured data type for every model. We can change its name but cant create a new structured data type from there also.
What should i do to create a structured data type in data modeler.

The right click on Structured Types does not open a menu on my Data Modeler either.
To create a Structured Type, click View on the main menu for the Data Modeler. Then click View Details -> Datatype.
In the Browser (called Navigator in other Oracle products), right click Datatype Model -> Show. This will show the DataTypes diagrammer.
Click on the New Structured Type button on the menu bar, then click anywhere on the DataTypes diagrammer, the Structured Type Properties window opens.
Enter all the details in the Structured Type Properties window to create your data type. Click Ok when finished. Your object type will be represented by a "blue" box on the diagram.
Jim Keese
Edited by: user9367840 on Feb 10, 2012 8:30 AM

Creating a new short name

I understand that changing the shortsname is a bad idea. Will I end up with lots of permission problems if I:
- created a new admin account
- copy all files from old short name account into new one
- delete old account

Rob J wrote:
I understand that changing the shortsname is a bad idea.
Not really. It is only a bad idea if you go in an start re-naming files.
Here is a utility to change your short name. I haven't tried it. Apple also provides some very complicated instructions to do the same thing.
Actually, in addition to being complicated, Apple's instructions are just plain wrong. Do a good backup, then try that Dan Frakes program. It it were me, I would just log in as a different admin account, change my short name in NetInfo, rename my home directory, log in, and clean up any poorly written programs that happen to break.

I forgot my apple id password so i create a new one. the problem is i cant remove my first apple id because any time i tried to reset my password i never received any email from Apple.now the problem is my iCloud and ... have problem on my iPhone????

I have a problem with my I phone5 . after i bought an iPhone6 and i joined it to my iTunes , the same problem happens to my new Iphone.
i thought with the new Apple ID the problem could be solved. so i create a new Apple ID. now i have 2 I Phones with the same problem means i can't remove my first Apple ID because any time i try to reset my password and delete the Apple ID i don't receive any Email from APPLE .
Please HELP me. i would be very appreciated .
thank you very much.

Hello ba.t,
After reviewing your post, it sounds like you tried to reset the Apple ID password but did not receive the email. I would recommend that you read this article, it may be able to help the issue.
If you didn't receive your verification or reset email - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Lenovo G480 Problem: I cant Create a new Drive

Similar Messages

Maybe you are looking for