Lenovo g50-70 keyboard issue

I bought my new G50-70 notebook (the Intel i5, 8gb RAM model) one week ago and it works perfectly. Yet I soon noticed that typing is pretty laborious since sometimes keys are ignored. Too avoid missing some letters while typing, I have to remember to press each key on its center and exert a considerable pressure. Typing in daily use thus gets tiring and non-natural at all. Did anyone with the same notebook find this issue? Do you think it's a defect common to all G50-70 notebooks  or it may just be my own model's?Thanks a lot in advance for your attention. Best, 
Andrea

Hi Aconroma,
Welcome to the Forums  
As per the query we understood that you are facing issue with keyboard in your Lenovo G50-70 laptop.
Remove the dust accumulated in the keyboard, do not remove the open the system or keyboard as the warranty might be void if the system is opened. Connect an external keyboard and check for the issue.
 Best regards,         
Ashwin. S

Similar Messages

  • Lenovo g50-70 keyboard and touchpad won't work at the same time

    My Lenovo g50-70 will not allow me to use my keyboard the touchpad at the same time. If' i'm moving the mouse pointer and then try to type something at the same time the pointer will stop moving until i stop typing.  I've searched the dicussion boards for a solution to this problem and I have found posts that instruct me to minimize the palm tracking portion of the driver. I now have the palm tracking set to the minimum value but it has not made a difference to my problem. does anyone have another solution? 

    Hi Dumptruck,
    Welcome to the Forums  
    As per the query we understood that you are facing issue with keyboard and touchpad in your Lenovo G50-70 laptop.
    Try to uninstall the touchpad driver and restart the system and reinstall the driver and check for the issue.
    Click here for the touchpad driver for windows 7.
    Click here for the touchpad driver for windows 8.1.
    Hope this helps. Do post back if the issue persists.
    Best regards,         
    Ashwin. S

  • New Lenovo x230 Pointer & Keyboard Issues

    I just received a new compay issues computer: x230 running Windows Pro 64 bit, Office 2010 and an SSD.  Unfortunately, out of the box the pointing devices, either the ultranav or an external mouse and keyboard (MSFT Sculpt), suffer from auto clicking and inability to input text...the text writes over itself...cursor moves forward and then backspaces on itself. 
    The external keyboard worked fine when tested on other notebooks at home.  I did unistall the MSFt keyboard SW on the x230 to see if that made a difference.  Nope.  My IT team remotely updated all drivers, etc. So, everthing system-wise is up to date.  They seemed to have fixed it for about an hour, then it went back to this behavior, including opening multiple instances of applications on its own.
    The PC is unusable.
    Thoughts?
    Halfcalf18

    The touchpad is defective. If you have an external mouse, try to disable it (either in BIOS or OS) while you get a replacement.

  • Issue regarding amd r5 m230 graphics card 2gb on lenovo g50-70

    i have Lenovo G50-70 Laptop (59-417110) (4th Gen Intel Core i3- 2GB RAM- 1TB HDD- 15.6 Inches- DOS- 2GB Graphics).
    i got driver cd with this laptop and i install it but its not working.when i check the graphics memory it shows 748mb only.
    i had also installed intel graphic driver by using that only i can change my brightness.so plz help to install amd graphics driver. i cannot open amd catalyst.
    Solved!
    Go to Solution.

    hi Ashish1793,
    If you're running on Windows 7 64bit, can you consider the following:
    1. Navugate to the Control Panel (icon views) > Display Adapters and uninstall both the Intel and AMD Display driver then reboot.
    2. Install the Intel Display Driver first then reboot.
    3. Install the AMD Dislpay Driver (the files will be extracted drivers to the C:\Drivers\VGA folder - overwrite if prompted and reboot if necessary)
    When finished,  you should now have both the Intel HD Graphics 4600 and AMD R5 M230 in the Device Manager > Display Adapters
    If you get a Code 43 error on the AMD Display Device Manager, try to install the AMD R5 M230 driver directly from AMD website and observe.
    If you have Windows 8.1, download the Intel and AMD Display driver from the G50-70 drivers page and install them respectively.
    Similar threads:
    Issues while installing graphics card (ATI Radeon R5 M230 - 1GB) 
    AMD R5 M230 on G510 windows 7
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo G50-70 Laptop (59-417110) Ram Upgrade Issues

    I recently purchased Lenovo G50-70 Laptop (59-417110) and it has in-built 2GB DDR3 1600MHz Samsung RAM.
    I have Windows 8.1 64 bit OS installed.
    I had to increase the RAM capacity to 6 GB. Hence bought Kingston 4GB 1600MHz RAM - http://www.kingston.com/dataSheets/KVR16LS11_4.pdf
    After installing additional 4 GB module from Kinston, windows is restarting after seeing logon screen by showing "Windows ran into a problem notification"
    Is this RAM module compatible with this lenovo model? I had researched inside lenovo support and changed maximum memory from msconfig, changed power settings, still no use.
    What should I do now?

    hi deljojoseph,
    Welcome to Lenovo Community Forums!
    Can you try removing the old module, the 2GB.
     check if your system will run with just the New RAM.
    After that 
     Try it also with just the old RAM an check.
    Let me know your findings
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo G50-70 freezes randomly

    MY PROBLEM IS AUTO TYPE OF KEYBORD ABRUPTLY ANY TIME......PLEASE PROVIDE ME SOLUTION

    Hi Sdmohanty,
    Welcome to the Forums        
    As per the query we understood that you facing issue with auto type in your Lenovo G50-70 laptop.
    Check if any key is stuck, also try to clean the keyboard also try to boot the system into safe mode and check for the issue.
    Hope this helps. Do post back if the issue persists!                                                   
    Best regards,                                                          
    Ashwin. S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lennovo g50-80 keyboard key broken

    Hi, my 2 month old lennovo machine just broke one of its keyboard keys, specifically the 'V' key. this is not due to any unusual usage, or any physical trauma to the laptop, it just popped off today. All my attempts to put it back on have failed. This is very frustrating, as this is almost a brand new laptop. Is the repair covered under my warranty?

    Hi Adellone92,
    Welcome to the Forums  
    As per the query we understood that you are facing issue with keyboard in your Lenovo G50-80 laptop.
    If the system is covered under ADP (accidental damage protection) then this issue will be covered, if there is no ADP then it will be on chargeable basis. Please visit the nearest authorized service centre.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.      
    Best regards,                                                                                                                              
    Ashwin. S

  • Lenovo G50-30 - "No Bootable Device" error message when trying to install windows 7 via DVD-ROM.

    Hi all, Recently purchased a Lenovo G50-30 as a birthday present. After recieving the laptop, I tried putting a fresh install of Windows 7 64 Bit onto it. After changing the BIOS settings to allow legacy booting from the DVD drive and changing OS Settings to Win 7, I noticed I was getting an error reading "No Bottable Device -- Insert boot disk and press any key". After googling for a few hours on how to fix this I am still stumped and nothing seems to work. Has anyone had a similar issue or would know how to fix this?

    Hi omegafeggy,
    Welcome to Lenovo Community Forums!
    Im kind of confused with the sequence.
    Have you installed Windows 7 first then change the BIOS or You changed the BIOS first then Load Windows 7.
    Thanks
    Solid Cruver

  • Can't find drivers for Lenovo G50-30 for Windows 7 32-bit

    Hi,
     I can't find drivers for Windows 7x32 bit for my new Lenovo G50-30. Looks like Lenovo support doesn't have them. Am I wrong?

    hi ziris,
    Can you try these drivers:
    Chipset:
    Intel® Chipset Device Software (INF Update Utility)
    Bluetooth:
    Bluetooth Driver (Intel, Atheros, Realtek, Broadcom)
    Camera:
    (AVC, Bison) Camera Driver
    If the  above drivers doesn't fix the unknown device under Device Manager, can you follow this guide on how to install the drivers via their Hardware ID or you may want to consider installing Windows 7 64bit (this would be best if you'll be utilizing 4GB RAM and above).
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • LENOVO G50-30 stuck at lenovo logo and cant even enter bios

    Hello
    I yust got my lenovo G50-30 and wanted to install win 7 on it. after the first BsoD I went to bios and changed the AHCI to legacy mode. Got the same BsoD.  After that I changed the Os mode from win 8 to win 7 ... loaded the factory default settings and putted from AHCI to legacy mode again.
    After that the laptop turns on, but it stucks at lenovo logo. I cant access the bios anymore to make any other changes. If I insert a win7 instalation disc, it start to spin but with no sucess. also cant acess the boot options anymore.
    Any help greatly apreciated

    I suggest removing battery and AC, holding the power button for more than 15 seconds to reset the BIOS back to default settings then see if the issue remains.
    Make sure to post the results.
    Good luck.

  • Lenovo G50-70 HDD Ticking Sound

    Hi I bought my laptop last august, now its HDD makes ticking sound when idle but it is fully functional. That sound is very annoying .

    Hi Stchoy903,
    Welcome to the Forums.
    As per the query we understood that you are facing issue with unable to detect external HDD and DVD ROM in your Lenovo G50-70 laptop.
    Check any other USB devices like pen drive, or your mobile through USB cable and check if the devices are detected? If yes then it might be issue with the external HDD and DVD rom, also check this devices in other USB ports as well.
    Boot the system into and check if the USB ports are enabled, if disabled enable it. Also boot the system into safe mode and check for the issue.
    Best regards,                                                                                                                              
    Ashwin. S

  • Lenovo G50 NOT plugged in, but 'charging'.

    I just bought a new Lenovo G50 about a month ago. The only strange problem I have picked up in the last 2 weeks, is that even when my notebook is NOT plugged into the charger, it still indicates that it is charging from an incompatible power source. Where my previous notebook, warned me on 10% battery left, my new Lenovo does not, because it is under the impression that it is 'Charging'.
    The battery life is not really affected and when plugged in, it charges the battery normally.
    Can anyone help me with a solution, before I take it back to my supplier. I know simple fixes like this can take up to WEEKS if I have to take it in.
    Thank you in advanced.

    hi dentonbronkhors,
    Welcome to Lenovo Community Forums!
    Can you try these steps:
      Open Device Manager and look Under Batteries, Right click and uninstall the item Named Microsoft SCPI compliant control method battery.
      Shut the computer down instead of doing a restart like the computer ask.
      Now Remove the Battery and Unplug the Ac adapter, Hold the poer button down for at least 10 sec.
      Turn the computer back on and See if that resolves the issue.
    Let us know your findings
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • New Z70 Keyboard issues

    Hi all, I have recently just purchased the new Lenovo Z70 laptop and it arrived a few days ago. Everything about it seems fine except the keyboard, it works but only just you have to really push hard and very central for it to register me pushing keys, as such trying to type anything takes years and is unbareable. Has anyone else experienced this? or know what is causing it?

    I also have very similar keyboard issues.  I bought the laptop beause it has all the things I want (epescially 17 inch screen & NON-GLARE screen which is crucial to usability.) But - I feel like this laptop has been ruined because it 100 percent slows down my work due to the keyboard problems.  I'm a very fast typist and have never had a keyboard slow me down until now, and the slowdown is huge.  I thought that my fingers would get used to whatever new touch methods are required after 6 weeks but it hasn't happened.  I end up with a big problem on the letter c --- half the time it appears twice and sometimes it doesnt appear at all.  Then there are the passwords that dont work for several times beacuse the keyboard is not registering the correct keystrokes.  And sometimes I dont catch what it has done to my text , with bad consequeces.  All my emails are unfortunately in an account that is labeled as my domain name with a .om after instead of .com because of the problems with the 'c' key that I didnt realize until much later.
    I'm not able to describe the intensity of the issue sufficiently, so just would have to state here that because of this keyboard issue, this is the worst laptop I've ever bought unforunately.  I can't understand how such a great item would be shipped wiht the primary user interface (keyboard) so effed up. I attribute some of it to posisble requirements of the keys themselves to get touched only in certain directions in order to regiister a keystroke.  But that doesn't explain the duplicate keystrokes I often see.
    In summary - I wish I had stayed with Dell.  I thought I'd go with Lenovo this time and this keyboard thing makes me frustrated that I strayed.  

  • T420 Keyboard issues

    I have a T420s and have keyboard issues.
    G and H keys are not working at all. also when you press 2 keys together you get a beep and a delayed output of the letters you pressed.
    also if you hold a key eg 'y' then press eg 't' nothing happens except a 'beep'
    please help as I am a reseller and have to deliver this tomorrow morning.
    lenovo tech support wont talk to me without paying till monday morning
    ash

    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014954
    use the above software to do a test on the keyboard to determine whether it is hardware or software issue.
    Unfortunately the support line is open only between 8 to 5 weekday, there is no afterhour or weekend support.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Wifi and Camera not working on Lenovo G50-45 80e300rgin

    I bought the laptop Lenovo G50-45 80e300rgin and installed Windows 8.1 on it. The problem is that when i launch the camera app it shows that 'No camera found' whereas the camera driver was installed successfully. The other problem is that there is no trace of wifi when searching for it whereas wifi is turned on from the BIOS and the laptop is not on airplane mode. I later disocvered that Device Manager shows no wifi device. Please Help!! 

    hi priyamdubey ,
    Welcome to Lenovo COmmunity Forums!!
    Do you have any device under device manager that has a yellow symbol? as it may be the wireless without proper driver.
    If the Wireless device is really not showing under device manager and it is on on BIOS, then it is a detection issue. the Wifi Device may not be physically detected by the computer,
    Try restoring the bios to defaults by hitting F9  then F10 to save and exit.
    The same might be happening to the Webcam
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • Why does not my servo motor work?

    Hello all, I can work my servo motors, so I have two questions. Firstly, I'm using PXI-7340 & UMI 7764 to control AC motor on servo motor (TAMAGAWA SEIKI co.), But in MAX, motor doesn't work with servo type.And there is no signal between AnalogOutput

  • Using Live Meeting in Macintosh

    There is a Live Meeting client for MAC? I'm using BPOS, but the web-base Live Meeting has limited functions compare to the windows version. Wagner Kondo – [email protected] MCP, MCTS, MCITP

  • ABAP server Proxies

    Hi Can anybody list down the steps that need to be configured (in XI and R/3) system for executing ABAP <b>server proxies</b>????? specifically, i am looking for steps that would connect XI with R/3 . There are a few issues we are facing during runti

  • Number of "Draft Forms" showing in Licensing Adobe Document Services, why?

    Hi Friends, I can see following details under the services -->Document Services License Service  in VA of ADS Server. Number of SAP Forms : 0 Number of Customer Forms : 0 Number of Draft forms: 3 <-----only showing. so where is the setting ? How to c

  • Event Gateways

    Is it possible to connect to google IM server using the IM gateways in CF ?