Lenovo G500 touchpad not working

I bought a lenovo G500 laptop around 6 months ago.So far everything was good enough but suddenly my touchpad has stopped working.I looked up in the manual and used the function key (F6) to enable/disable it but this is also not working.If I plug in the usb mouse then it works fine.Di I need to reinstall touchpad drivers? Help pls...

hi Prathibha,
Welcome to the Lenovo forums!
YES,
I would consider as my first step on throubleshooting this.
Open Device Manager and under Mice and Gaming controllers, Rightclick and Uninstall the Synaptics or ELan touchpad,
Restart the system and Install the driver back,
Windows 7
Touchpad Driver (Synaptics, Elan)
Windows 8
Touchpad Driver (Synaptics, Elan) for 64-bit Windows
Windows 8.1
Touchpad Driver (Synaptics, Elan)
Let me know your findings
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Lenovo Z5070 Touchpad not working

Hello everyone,
I bought one lenovo z5070 20 day ago. But at the 3rd of the day touchpad was not working very well. I updated drivers, formatted laptop and tried again. Touchpad working cofusingly. When i touch at touchpad it is not working first after few seconds it is working. But when I'm use mouse and after using mouse ı try to use touchpad again. It is not working again and again.
What could i do for fixing this issue ?
Thanks..
Lenovo Z 5070 Model Name : 20354
Serial Number : 59-432087

Hi Salihyalcin,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with the touchpad not working in your Lenovo Z50-70 laptop.
Try to uninstall the driver and check for the issue, also try to boot the system to the safe mode and check for the issue.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo N500 touchpad not working

do not working on a laptop touchpad, it does not react to touch, please help me!!!

Hi irakli-18,
Thanks for posting and welcome to the Lenovo Community,
I’d like to help you with the issue that you’re facing and first I’d like to ask you above the top right of the keyboard are four touch sensitive buttons. The far right one disables / enables to touchpad.
I need to ask you when you press on the other touch sensitive buttons are they working except the Touchpad?
Thanks and Best Regards,
Soha
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

MSI GS70 20D Touchpad not working after login when I upgraded to 8.1

Short situation: I upgraded my laptop to windows 8.1, and the touchpad stopped working on the start/desktop screens. I could move it before I logged in, and after it would work for a few seconds, but then it would just stop. An external mouse works just fine, but I still don't want my touchpad not working.
I looked on the MSI USA technical support page, and it said to delete the old drivers for the touchpad and download new ones. I deleted the drives, but every time I try to download the new ones, I get a window that says my touchpad isn't plugged in, and that the drive isn't compatible with my touchpad, which doesn't make sense to me because I looked up my product specifically and tried all three touchpad drivers. None of them worked.
Now I can't use the touchpad at all because I deleted the drivers, so it would seem that the computer doesn't know it has a touchpad because it won't register the touchpad in my devices tab.
Does anyone know what I can do to solve this? Or to at least get the touchpad to register again? I just got this computer for Christmas, I've treated it very well so it hasn't banged up against anything or been dropped or mistreated, so I cannot understand why this is happening. It worked before the 8.1 update, so I'm pretty sure the issue has something to do with that.

UPDATE: So I managed to fix the touch pad by deleting the driver and rebooting, which is weird because I removed the driver completely and never reinstalled it, so the computer shouldn't really know it has a touch pad. But every time I reboot the computer after fixing it, the touch pad goes back to it's old problem and I need to redelete and reboot all over again.
Also, My computer has begun to randomly freeze and not respond to anything, with one such event leading to a blue screen with a WHEA_UNCORRECTABLE_ERROR message. The computer has frozen a total of 6 times, at different moments; when I'm typing on microsoft word, at the login screen, even right when it starts up and the msi loading screen is up. 5 of these times have required a forced shut down, the first time the computer shut off on it's own because it ran out of battery power.
Finally, my computer has begun to periodically for long stretches of time stopped detecting wireless networks and is asking to be plugged into an ethernet cable to connect to the internet. This has never happened to me before, and I know I haven't turned off my network sharing center.
I'm not sure why this is all suddenly happening. It's not like I'm banging my laptop against walls. I'm very careful when I move and use my GS70, so these problems are greatly concerning to me because I just got this computer at Christmas.

Touchpad not working indecate yellow light

touchpad not working indecate yellow light

I think it is telling you that you need a firmware update. Happend to me

HP Pavilion g6-1c39ca touchpad not working

Hi, so i turned on my laptop today to find my touchpad not working, I did not change any of the settings. I am unable to enable the touchpad by tapping the cirlcle in the corner of the touchpad as it is broken. I tried to go to control panel-mouse-hardware and sound-mouse but there is no tab for device settings. After reading a couple of questions in the support forum I then downloaded the synaptic touchpad driver from hp support, but it could not be intalled correctly on my computer. Can someone please help me with this issue.

Hi @thomasand ,
Welcome to the HP Forums!
It is a superb place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your TouchPad/ClickPad has stopped working. The round button in the upper left corner of the TouchPad is non functional. You went to the control panel-mouse-hardware and sound-mouse but there is no tab for device settings.
You tried downloading the software and drivers but were unable to install them.
Here is a link to HP Notebook PCs - Using and Configuring the TouchPad (Windows 7 and Vista) that may help.
If you still have this difficulty please contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Keyboard and touchpad not working after Windows 10 update

after udating windows 10 on my probook 4440s keyboard and touchpad not working. if i press a key for 10seconds the key then shows up in the screen. and touchpad is worst. it freezes all the time barely moves. but with usb mouse it works fine

It's known that installing Windows from an external DVD drive on a Mid 2013 MacBook Air causes that the keyboard doesn't work after finishing the installation. The fix is to install Windows by using a USB drive. See > http://support.apple.com/kb/TS4599

Lenovo keyboard does not work

I bought a new Lenovo laptop (flex 2 14) and did the required setting. After that the physical keyboard and the touch pad don't work. I only can use the touch screen.
I did not know what's the problem. Please help me

Welcome to the Lenovo Community Hannes !
If you have you tried uninstalling the mouse / keyboard / touchpad driver, reboot the computer and then installing a fresh copy of the driver ?
The link below is for the available driver from Lenovo for your model. Just select your operating system in the top box for the correct driver listing.......
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g500s-n...
If you have a USB keyboard available to use does that work ? If the USB keyboard works without problems and the driver installation didn't this could be a very good indication that your keyboard has failed. In that case I would recommend you contact Lenovo Support for service especially if the laptop is under warranty. You can find the phone number for Lenovo Support in your country or area by using the link below....
http://support.lenovo.com/us/en/supportphonelist_alt1
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Yoga 13 touchpad not working at one spot

Hi,
i bought an Ideapad Yoga 13 from amazon and it has one problem. One spot on the left side of the touchpad is not working. When I move my finger to that point, the cursor does not move and the little icon in the notification area of Windows 8 does not show any pressure. The area goes from top to the bottom of the touchpad but is only a few millimeters wide. This is very annoying when I move my finger from one side of the touchpad to the other for example when I'm dragging something with the cursor, because at this point the cursor just stops.
Could this be a problem with the driver or is my touchpad faulty and I should just send the Yoga 13 back? Also do I send it to amazon or lenovo?
Thanks for any answers and suggestions.

hi pagefault,
Welcome to Lenovo Community Forums!
One way to try this out is to Uninstall the Synaptics Driver and try the touchpad using windows driver if it still the same.
To Remove Synaptics Driver:
Go and open Control Panel / Programs and Feature / uninstall a program
You will see Synaptics as one of the programs, Uninstall that and restart the Computer.
Once restarted Try the touchpad and see if the problem is still there.
    Verify that the synaptics driver is uninstalled by Checking the mouse properties
                Open Control Panel / Hardware and Sound / Mouse
      This option should be gone if the synaptics driver is uninstalled
If Without a driver, you're still having the same issue I would consider this as a Hardware Concern.
You can contact Amazon or Lenovo Technical Support about the issue.
If the problem disappeared without a driver
Try reinstalling the Synaptics driver by downloading and installing this
Synaptics TouchPad Driver for 64-bit Windows
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo G500 TouchPad and Keyboard wont function at the same time

Lenovo Laptop G500
Windows 8
Synaptics TouchPad V7.5
Driver Version 16.3.13.3
The Synaptics TouchPad and the keyboard won't function simultaneously. If I uninstall the driver for the TouchPad the keyboard and TouchPad will work simultaneously on the windows driver however the TouchPad is very limited. There is no option to turn off the palm touch listed as a fix in other forum post.
This problem makes it impossible to play games that require the TouchPad and mouse to work simultaneously I would appreciate any help in resolving this issue.
Thanks in advance Dennis

hi djdishaw,
Welcome to the Forums.
Can you try to:
1. Lower the palm tracking and touch sensitivity to minimum, apply the changes and observe.
- Link to picture
2. If same problem, try to update the Synaptics Touchpad driver to v16.3.15.1 and repeat Step 1.
Windows 8/7/XP/Vista 64/32-bit Edition v16.3.15.1
All Languages
113.9 MB zip
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Left button of touchpad not working

left button of touchpad of my laptop G550 is not working, please help

hi jspanwar.
it is usually hardware issue that touchpad left/right button not working. if you have valid warranty, you can call lenovo support line for further informations.
but, before, can you check if the issue persists on safe mode?

G500s OKR not working

Hello everyone.. I just bought a Lenovo G500s laptop. It came with a C drive of 890 GB and also with a D (Lenovo) drive of 25 GB. As you can see, I had to resize the C drive partition which i did but to my surprise, i lost the OKR functioning. Now i have OEM partition with a capacity of 13.21 GB ( It shows free space of 13.21 GB also). Did i accidentally delete it?? is it empty now?? How do i use it again ( Sorry for my not so good english)
I have a few question, please help me because i am just a noob
1. Can i again get OKR work again??
2. Can i use windows recover tool to use that free OEM partition?? ( i tried to but windows recovery doesnt show my OEM partition).
3. Is it necessary to make a recovery dvd or USB flash drive ( or OKR )?? Can i not recover my system just by using windows sytem restore?? ( Would i be needing any of the above things)??

Hi Agalloch90,
Welcome to Lenovo Community Forums!
I’m sorry to hear about your situation, if the OKR (One Key Recovery) software is not detecting the partition, it may have got deleted while the time of resizing the C: drive. Hence I suggest you to re-install the OKR software and check the issue, below is the link to download the OKR Software:
Lenovo OneKey Recovery for Windows 8 (64-bit)
NOTE: It is recommended to create a set of Recovery Discs at the time of purchase.
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My new Lenovo IdeaPad N580 not working well :(

Hello, I have a Lenovo IdeaPad N580 with build-in windos 8 OEM. I got from my uncle, came from abroad. now a days it does not wark as well. Problems, 1. Sometimes touchpad seems to be hanging when I working. But with external usb mouse it works fine. 2. Some keys are not working like u, k 3. When my system run first..... If I doule click on any icon in desktop to open it...... It accept the command as "Delete"... I seems just I want to delete the icon.... by the way I want to open the program/drive. When the hidden command is executed..... I find the icon/folder/file anything in "Recycle Bin"..... and command seems to be unlimited (multiple times).... My observation in this issue: System might be work in self!! also in Windows "safe mode" I tried to fix up it by "System Recovery" and "System Resetting". But no result Please help me to fix the problem Regards, P Delwar

Bring all the express to the same room as the mac you are using to setup the network..
One by one, plug them in and do full factory reset on them.. they should then show up in the Airport utility as Other Wi-Fi devices (1) and you can select them and continue the setup.
If that fails try using the airport utility on ipad or iphone as they are far less problematic than Yosemite in particular.

U410 a year old, touchpad not working, have to turn it off, otherwise it clicks everything.

I have a U410, and it's a year and a half old. Touchpad is not working, so I turn it off to do anything. If I don't, it thinks I'm clicking on everything, thus causing tons of problems, freakouts, etc.

Hi Apache05,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with touchpad in your Lenovo U410 laptop.
Try to boot the system into safe mode and check for the issue, also try to update the driver to the latest version and check for the issue.
Click here for the touchpad drivers for windows 8.
Click here for the touchpad for windows 7.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo AIO C440 - not working infrared remote control

Hello,
is there any hint how to get infrared remote control working for a new C440 model? Tomorrow I will try to measure and/or replace batteries which could be bad. For now it is totally not working.
Another question: the remote should work only within AverMedia TV app or in the whole Windows 8?
Regards,
Zdenek

hi bohdik,
Welcome to the Lenovo Forums.
The IR Windows Media Center remote control is for use with C440 models with optional TV tuner. If you have this model, make sure the TV Tuner driver and the ITE CIR Driver from the lenovo support site are installed under Device Manager (press Windows Key+R then type devmgmt.msc) then follow the Set up a TV signal in Windows Media Center. guide.
Note:
You must have Windows 8 PRO to enable Windows Media Center
See this articles in reference:
How to add Windows Media Center to Windows 8 Pro
How To Install And Set Up Media Center On Windows 8
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo G500 touchpad not working

Similar Messages

Maybe you are looking for