Lenovo G510 how to enable TPM

Am have a Lenovo G510 i would like to enable TPM (Trusted Platform Module)
How do i enable TPM

hi mbakaimani,
Welcome to the Forums.
As per the info below, I'm afraid the Lenovo G510 doesn't have a TPM chip.
G510 Datasheet
G510 Tech Specs
If you're looking into using Bitlocker (which requires the use of a TPM chip), check the guide below on how to proceed:
How to Turn On or Off BitLocker for Windows 8 OS Drive with or without TPM
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Lenovo B570e - how to enable WI-Fi and bluetooth?!

Hi.
On every hardware information in web, i see that B570e have Bluetooth - where? System (Fedora 16) says, that there is no bluetooth adapters to use (what?). So - this laptop have or don't have this integrated bluetooth? I don't see any information in lshw about it.
Second - how to run integrated Wi-Fi card: AR9285 Wireless Network Adapter (PCI-Express). It's disabled and i can't turn it on (even from Fn+F5). Official lenovo support in poland said, that theres support only Windows and if some hardware not working under linux - it's my problem.
HELP - i've spend last 4 days to do something with this problem.It's a brand new laptop and i can't use it fully.
ps: sorry for english, but it's not my native language
ps: about wi-fi, blocking acer-wmi is not working, because i don't have acer-wmi running.

Well - it's not a problem with acer-wmi, because on my Fedora, this module is't even loaded. Maybe acer-wmi is on some other laptops and on these laptops, this solution works. On software side - problem is solved, rfkill unblock all do the trick. The main problem is with hardware blocade (phy0):
# rfkill unblock all
# rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
1: ideapad_wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
2: ideapad_bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
I've just read some posts about this, that hard blocked is possible to solved only by some Lenovo energy managment software, but this software is only for Windows. Well... i'm downloading right now Windows 7 Enterprise, 90 days trial edition from Microsoft website. I hope, that i switch on wi-fi with that software, switch to Linux, delete Windows and everything will be just fine...but...i lost 6 days of life, only for fight with my new laptop, or fight with Linux.
Anyway - what with bluetooth?
2: ideapad_bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
But there is still no adapters found by the system. I think installing Windows solved all my problems, but i'm using Linux 4 years and i don't have many for buying Windows.

How to enable execute-disable bit and other hidden settings on Lenovo 3000 N200 model 0769!

2008-11-16: I have posted some more settings, scroll down to message 19 in this thread to read them.
Hi,
Here's some good news for anyone with a Lenovo 3000 N200 model 0769, who is disappointed and frustrated with the lack of options in the BIOS setup menu. (I had a moan about that in this thread.)
This is a long post but I hope you'll find it worthwhile. Here are the features/settings which I will explain how to enable:
The BIOS disables the execute-disable bit function of the CPU, with no way to turn it on. You can enable it.
You can set VGA and VESA graphics modes to not be stretched to fill the whole screen (sharper graphics with no distorted aspect ratio).
Speed up the POST display by skipping the memory test
Disable various features (if you don't use them, that might save some power): the HD audio controller, WLAN card, on-board LAN, shadowing of the video BIOS
Enable beep before booting the OS
Enable key click sound (only in DOS, not Windows or Linux)
I'm still working on this, and hope to figure out more hidden settings soon, e.g. to disable the DVD drive and trackpad, and to change the video output from NTSC to PAL.
The information below applies to the Lenovo 3000 N200 model 0769 with BIOS version 3.03. My N200 has Nvidia graphics. For some background on the general principles/research required to figure this out, please see this thread at Wimsbios.com.
To change the settings, you need to create a bootable DOS floppy disk or USB drive. Download SYMCMOS.EXE (Google for it) and put it on the bootable disk. Boot the disk and run SYMCMOS to back up your current CMOS settings: SYMCMOS -Lsettings.txt
Next load the settings.txt into a text editor. It will begin like this:
( SYMBOLIC CMOS EDITOR - Version 643710-035 )
CRC = 3EDD
(0000) [0001]
(0003) [0001]
Your CRC value may differ. Each line after the CRC contains a token number, followed by the value of that token. You can start with the settings.txt you created and edit any tokens you want to change, or delete all token lines and just include the tokens you want to change. Then use SYMCMOS.EXE to apply the new file: SYMCMOS -V2 -Uupdate.txt
After running that command you can reset, and hopefully notice the new settings in action. (For certain settings, such as re-enabling the execute-disable bit, you need to turn the computer off then on again.)
Here are some specific tokens you can change:
Token Default New Description
(0000) [0001] [0000] Disable the HD audio controller
(0042) [0001] [0000] Disable LCD panel graphics scaling/stretching
(004B) [0000] [0001] Beep before booting the OS
(0267) [0001] [0000] Enable support for the CPU execute-disable bit
(028E) [0000] [0001] Enable key click (only works in DOS and BIOS setup)
(02A3) [0001] Set to 0 for slower memory test, or 2 (or 3?) to skip
test for faster booting, especially with 4GB RAM
(046E) [0001] [0000] Disable video BIOS shadowing. (Best to leave enabled.)
(0471) [0000] [0001] Enable 1MB memory hole at 15MB. (Best leave disabled.)
(0486) [0001] [0000] Disable PCI Express ports 1-6. This takes precedence
over the individual port bits below, and disables the
LAN, WLAN and (probably) ExpressCard port.
(0489) [0001] [0000] Disable PCI Express port 2 (WLAN card)
(048C) [0001] [0000] Disable PCI Express port 3 (maybe ExpressCard?)
(048F) [0001] [0000] Disable PCI Express port 4 (LAN)
For example, if you want to disable LCD panel scaling and enable the execute-disable bit, you would create a text file like this:
CRC = 3EDD
(0042) [0000]
(0267) [0001]
Some final points:
Loading the default settings in the BIOS setup menu will overwrite any changes you make using SYMCMOS.EXE. So keep that bootable disk around in case you need to re-apply your settings in future.
The token numbers above are specific to version 3.03 of the Lenovo 3000 N200 model 0769 BIOS. They might be different for earlier BIOS versions, and will be different for other models of computer.
Once you have created a bootable floppy disk with a text file containing your updated settings, you could create a bootable CD with the floppy's data on. Just boot that CD to restore your settings in future.
Before experimenting with randomly changing token values to discover other hidden settings, make sure you know how to reset your computer's CMOS memory! Changing some settings results in your computer becoming unable to boot, so you can't use the BIOS setup screen to reset. I wrote about how to reset the N200 model 0769 CMOS in this thread.
If you discover any other settings, please let me know.
Any changes made are at your own risk; if you "brick" your laptop don't blame me!
Message Edited by Donuts on 10-15-2008 09:45 AM
Message Edited by Donuts on 11-16-2008 11:35 PM

Hi Donuts !
My computer is a 3000 N200 0769BAG. It has a Dual Core Pentium and the information I get about the BIOS using lshw are :
========================================================================================
description: BIOS
          vendor: LENOVO
          physical id: 0
          version: 68ET35WW (04/16/2008)
          size: 106KiB
          capacity: 960KiB
          capabilities: pci pnp apm upgrade shadowing escd cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot biosbootspecification
====================================================================================
I've nothing telling me it is a 3.03 BIOS version but only got the BIOS file name (68ET35WW);
Is it the same BIOS you used and if not how could I find the list of (token, default value,new seting) for that particular BIOS ?
Thanks a lot in advance for your help !
Regards

How do I enable TPM in the bios on Product name: HP Pavilion dv7 Notebook PC

Hi,
I have run into a problem trying to enable MS Bitlocker on Windows 8.1 on
Product name: HP Pavilion dv7 Notebook PC
BIOS version is: F.1C
In the Windows UI, the TPM (Trusted Computing Module) management console says that I need to enable TPM in the BIOS.
Issue:
There does not appear to be any proverbial "on" switch in the BIOS for TPM versions 1.2 (or 2).
Question:
Anyone out there know how to resolve this?
I know there may be a way to get around this using group policy on the machine or to buy a USB key solution.
Looking for the hardware solution in the laptop if possible please.
Thanks in advance for any help.

Hi:
As far as I am aware, HP consumer notebooks do not have a Trusted Platform Module chip.
Check the device manager...if there is a TPM chip, there will be a Security Devices category in the device manager, and you would see the TPM chip listed under that category.
If not, then there isn't one.

How to enable the 3G card on the lenovo x300 647818M under VISTA?

Hi
Anyone knows how to enable the 3G SIM card under the VISTA???
I insert the one 3G card into the backsideof laptop and install the driver. But i never get any pop up for connect to internet via the 3G sim card.
So, Please help.
Cheers
Alex
Solved!
Go to Solution.

You need a SIM card AND a WWAN card. In brief, your SIM card authorizes you to connect to your wireless provider's network. The WWAN card contains the electronics which connect to your provider's network. Your X300 does not have a WWAN card. Some X300 configurations do.
I don't work for Lenovo. I'm a crazy volunteer!

LENOVO G510 INACCESSIBLE_BOOT_DEVICE

LENOVO G510 INACCESSIBLE_BOOT_DEVICE
I have a preinstalled Windows 8.1. My Laptop keeps rebooting with INACCESSIBLE_BOOT_DEVICE error and doesnot starts my windows. I have tried every trick in the book - such as used all advance repair option which provides in the start, chkdsk /f/r and nor the legacy support doesn't even allow to boot from a cd/dvd. I need urgent help unable to use the Laptop for last 3 months. Really fedup.
Regards Punit
Moderator comment: Personal information removed to protect member privacy.

hi Punit,
Welcome to the Forums.
An Inaccessible Boot Device means that the hard drive's fails to load the Boot Configuration Data (BCD) and its necessary files to load the Operating System. This could be due to a corrupted BCD, a boot sector virus, or a damaged boot sector (bad sectors on the HDD).
Things that you can try:
Option 1:
If you have access to a command prompt, follow this guide on how to repair the MRR/BCD (see Attempt Two and Three), otherwise, do the following:
a. On another PC, follow this guide on how to obtain a Windows 8.1 ISO (see Option One)
b. After downloading the Win8.1 ISO, follow this guide on how to make a bootable UEFI Win8.1 installer via DVD/USB flashdrive. When finished set the following settings in the BIOS (if applicable) to be able to boot from the media:
Security Tab:
Secure Boot = Disabled
Boot Tab:
USB Boot = Enabled (for bootable flashdrives)
Boot Mode = UEFI (for UEFI installers, otherwise, set this to Legacy)
Exit Tab:
OS Optimized Defaults = Other OS
If successful, you should be able on the Windows 8.1 installation screen. Click Repair your computer > Troubleshoot > Advanced Options > Command Prompt or press Shift+F10 to open up a command prompt and follow this guide on how to repair the MRR/BCD (see Attempt Two and Three)
Option 2:
Use the bootable Windows 8.1 ISO that you created on Option 1 use it to reinstall Windows (the installation should be able to detect the Windows 8.1 product key in the UEFI firmware that will let you activate Windows). Note that you will need to reinstall the drivers from the D:\Drivers folder or from the G510 drivers page.
Option 3:
Shut off the machine, press the OneKey Recovery button and restore the system to original state (note that this will wipe out the OS partition)
if you have files to backup, use the installer that you created in Option 1 and follow this guide.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Enable TPM on M73

We have just received some ThinkCentre M73's and need to enable TPM on the pc's as we will be encrypting them with bitlocker as part of an MDT process. On our Dell pc's there are options within the BIOS to enable and activate the chip but I am unable to find this on the M73's. Can anyone advise how I can do this please.
Many Thanks
James

I would escalate this through your lenovo rep or through official support in your place.
Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer.

Deploy Lenovo with SCCM and enable Bitlocker during deploying?

Hi!
Do anyone got information how to activate TPM and enable bitlocker during deploy of new Lenovo with SCCM ?
Something like this but for Leonovo
http://www.nullsession.com/2010/12/02/enable-tpm-in-task-sequence-with-sccm-and-cctk/
Thanks, Magnus
Solved!
Go to Solution.

jamessnarey wrote:
has anyone been successful with the WMI script on the M92p models, I recently attempted to activate the TPM using the same script that we use for our M91p and it fails. When I check the logs, it states that access is denied, when I run it manually I get the same error (access denied). Our lenovo rep says that you cannot use the WMI to enable the TPM and that the Enable Bitlocker step should enable the TPM. However we automate our OS deployments so manually enabling bitlocker is not an option, any assistance or feedback is appreciated.
I was having the same issue and I discovered another way to accomplish this task. Download this utility:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_bios/9sjw67usa.exe
Run the EXE to extract the files to the location of your choice, then copy them to your script location. From your script, run the following command:
srwin.exe /tpm active
Then do a couple reboots (this may not be necessary, but I didn't have time to test it.)
There are a couple of caveats. First, the working directory must be the directory the utility is stored in (presumably so it can find the two .sys files). I.e. you can't do
c:\utilities\srwin.exe /tpm active
you have to do
cd /D c:\utilities
srwin.exe /tpm active
Also, I was attempting to run this in a WinPE session (doing OS deployment using SCCM 2012) and I was getting an 0x80070134 error in my logs. I had been using an x64 boot image, and switching to an x86 boot image resolved that issue.
Hope this helps someone.

Lenovo G510 Windows 8 Read Only Folders

Hello everyone,
I just bought a new Lenovo G510, and I installed the Windows 8 that was on the partition.
The installation went fine, and everything is in order.
The only problem is that ALL my folders are Set to READ ONLY. Is this something normal for Windows 8 and how can I set it to a different state, since I know that in future that will be a problem?

hi francis17583,
If the G510 system came preloaded with Windows 8, there are two ways on how you can restore the system to factory settings:
Option 1:
- Turn off the machine and press the OneKey Recovery Button
- On the Novo Menu, select System Recovery and follow the screen prompts.
- Link to picture
Option 2:
- Follow this guide on how to create a recovery drive
- Boot from the recovery drive and follow this guide on how to reset the PC.
I recommend Option 1 in case you don't have a flashdrive (8GB or above) but ensure that you have a backup of your important files as the above procedure will wipe the OS drive.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to - enable - multi touch - in windows 7 ultimate - for my G560 touchpad

I and my friend have the lenovo G560 laptops. I am running windows 7 ultimate and my friend is running ubuntu 11.04 OS in our laptops.
In Ubuntu: The multi touch is enabled by default for the laptop touch-pad. For vertical scrolling, we can use two fingers to navigate.
In Windows 7 Ultimate: I don't know how to enable this multi-touch feature.
Your help is very much appreciated.
Thanks in advance.

control panel > hardware and sound > mouse > mouse properties > device settings > settings ( if you have synaptic mouse )
if you don't synaptic, check the mouse properties to enable/disable the features you'd like to.

Windows 8.1 installation problem on Lenovo G510

Hi. I bought a new Lenovo G510 laptop. I downloaded Windows 8.1 from Microsoft DreamSpark, and burned ISO image on a DVD disc. When I try to install it on my laptop, I receive an error (it might be wrong translated):
Load Driver
A media driver your computer needs is missing. This could be a DVD, USB, or Hard disk driver. If you have a CD, DVD, or USB flash drive with the driver on it, please insert it now.
Note: If the installation media for Windows in the DVD drive or on a USB drive, you can safely remove it for this step.
I already tried changing the following options in BIOS but no effect:
Configuration tab -> SATA Controller Mode from AHCI to Compatible
Boot tab -> Boot Mode from UEFI to Legacy Support
Boot tab -> Boot Priority from UEFI First to Legacy First
Also, I tried to insert CD with drivers which was in the box, but - of course - no appropiate drivers were found.
What happened? How am I supposed to install a Windows 8.1? What should I try? Thanks in advance for giving any clues and answers
Solved!
Go to Solution.

hi JachuPL,
Welcome to the Lenovo Forums.
From this microsoft article, the error that you're getting maybe caused by one of the following:
- The installation DVD is removed during the setup process.
- A low-quality DVD was used to create the installation DVD.
- The speed at which the installation DVD was burned was too fast.
- The DVD drive cannot read the media.
- The ISO file is corrupted.
Things that you can try:
1. Verify that the Windows 8.1 ISO is not corrupted by comparing the MD5 / SHA1 Hash of the download file to the one from DreamSpark. To get the hash, download and install the Microsoft File Checksum Integrity Verifier and foillow this guide.
2. Instead of using a DVD, follow this guide on how to create a bootable Windows 8.1 USB installer and use it to install Windows 8.1. (use the USB 2.0 port on the unit).
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo G510 Camera Dark Poor camera Result Issue

Hi
i got new Lenovo G510 last week windows 8 64bit operating system core i3
In its specs it se clearly shown that it have 720 p hd camera but when i opened the camera app from start menu it only shows 0.1MP (4:3) and 0.3 (4:3) option and result is so dark and laggy
I checked the driver in device manger it shows properly installed by this name 'Lenovo Easy Camera" driver details are Microsoft driver version 6.2.9200.16664
i tried to update it from internet but it says its updated
i tried manually install the driver from here " C:\drivers\Camera Driver (AVC, Liteon, Bison, Chicony)" but Warning message pops up " NO APPROPRIATE DRIVER TO B INSTALLED"
Then i tried to install it from her C:\drivers\Camera Driver (AVC, Liteon, Bison, Chicony)\HD\Bison\3.13.301.1
but setup gets "failed" at the end and says "please plugin the device and restart the setup"
PLEASE HELP ME PLEASE

hai13h wrote:
I bought g510 week ago and the camera is terrible black, and blur i tried many drivers many ways but nothing succed... how to fix it!

Lenovo G510 touchpad scrolling not working in windows 7

I have a windows 7 - 64 bit operating system on a Lenovo G510
I have installed Touchpad driver for windows 7 from Lenovo site but i found very annoying problem which is the touchpad scrolling function not working .....
Please Help
Solved!
Go to Solution.

hi Shady710,
Welcome to the Forums.
If you have a Synaptics Touchpad, can you check if you have a One Finger / Two Finger Scrolling feature under Mouse Properties.
- Link to picture
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to enable CUDA in T61?

How to enable CUDA in T61?
Thanks

http://blog.csdn.net/kron/archive/2008/04/30/2350782.aspx
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

How to Enable sleep/standby (windows 7) T61

How to enable sleep/standby mode on a windows 7 32bit lenovo t61 - 7665?
Background info:
I just formatted my Lenovo t61 - 7665 because I had alot of problems with hibernation and sleep mode.Now I really don't want to update if I dont have to but I need to update something to make sleep mode work?
Does anyoe know what driver or software to install to make sleep standby mode work. Hibernation works great
Thanks

Just look into that thread
It might help you.
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Lenovo G510 how to enable TPM

Similar Messages

Maybe you are looking for