Lenovo g510 stuck in logo screen

this laptop was purchase one year ago,
It stuck in the repair loop twice but it was fine after refreshing the pc.
few days ago, when i started the pc
, it just stuck in the logo screen and not even loading into windows.
what is the possible problem and any solution?
thanks

If you can not get the system to boot, either using power button or OKR button (smaller, with upside down V) successfully, this may be a hard disk drive issue that has compromised the boot records. The key here is that the system repair kicked in twice.
If you have a second computer with a USB hard disk drive dock (for normal and notebook drives) you may be able to remove the disk drive from your notebook and retrive your user data from it via the USB dock.
Good luck.

Similar Messages

PLEASE HELP!! my ipod 4th gen is stuck on logo screen...

Hi everyone....i could use any help i can get, thanks
OK SO, its been an hour now and my ipod is still stuck on the logo screen! i just dont know what to do! ive held down the top and center buttons together but when it turns off 10 seconds later it pops back up. i even tried connecting my usb cord but my itunes doesnt pick it up either?? any suggestions??

Did you try to connect in recovery mode? iOS: Unable to update or restore

Powermac g5 won't boot mac os 10.5 stuck at logo screen

Anyone experience this problem? How do I fix it?
PowerMac G5 wont startup. gets stuck on grey screen with apple logo with no turning gears, then fans start blowing really loud.
Using latest Mac OS 10.5
It will not start up from an install disc, but will run the hardware tests.
All tests pass in G5 hardware test disc.
Hard drives have passed all tests, been rebuilt and repaired permissions.
I have tried starting up in safe mode, holding down the option key to select a drive and holding down the c key to startup with an install disc.
The battery was dead so I replaced it but it still wont boot.
I tried zapping the PRAm still not booting up.
I have attempted to use terminal but get the following message then there is no response.
Darwin Kernel Version 9.8.0: Wed Jul 15 16:57:01 PDT 2009;
root: xnv-1228.15.4~1/Release_PPC
Standard timeslicing quantum is 10000 US
VM_page_bootstrap: 1021219 free pages and 27,357 wired pages
mig_table_max_displ = 79
Extension "com.apple.driver.Apple Mac Risc4PE" has immediate dependencies on both com.apple.kernel and com.apple.kpi components use only one style
Loading security extension com.apple.security. TmSafetyNet
calling mpo_policy_init for TmSafetyNet
Security policy loaded Sfety net for Time Machine (tmSafetyNet)
Loading security extension com.apple.nke.applicationfirewall
Loading security extension com.apple.security seatbelt
calling mpo_policy_init for mb
Seatbelt MACF policy initialized
Security policy loaded: seatbelt policy (mb)
Copyright (c) 1982 1986 1989 1991 1993 The Regents of the University of California. All rights researved
Mac Framework successfully initialized
Using 16384 buffer headers and 4096 cluster 10 buffer headers
DART enabled

Mac OS X: Gray screen appears during startup

Iphone 6 stuck on Logo screen with flash of screen for a split second then back to logo screen :(

I purchase my Iphone 6 Roughly a month ago. Last night it died so I plugged it in and this morning it is stuck on the Apple logo screen and flashes to a red screen for a split second then back to the Applelogo screen. I have not done any updates since purchase. I have tried the power and home buttons together and simotaneously with no result PLEASE HELP!!!

Hi ptina78,
As someone who uses and depends on my iPhone on a daily basis, I know I would be upset if my phone did not start up properly. Let's see if we can get you back up and running. If your iPhone is not completing its startup sequence and you continute to see the Apple logo on the display, you may need to reinstall the iOS operating system on the iPhone. This article tells how -
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Specifically -
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

Lenovo g510 AMD drivers BLUE SCREEN

Hi there,
I recently bought a Lenovo g510 with AMD Radeon graphics card. When I try to install the driver for the graphics card, i got a blue screen. I then cannot even enter Windows in safe mode. Only thing I can do is startup repair which takes forever. Before trying to install the driver, I cannot see the AMD graphics card under the display adaptors in device manager. I run Windows 7 64 bit.
Please help.
Panos.

Hi,
After a lot of tries I have tried Windows 8.1. This time when I install the drivers the graphics card is shown in device manager but I cannot open Catalyst manager. I got the message:
"catalyst control center cannot be started there are currently no settings that can be configured"
This is what I tried:
1.Downloaded the drivers from lenovo website for chipset, Intel HD graphics and AMD graphics
2.Swhitched off the internet so that Windows doesnt download drivers for the Intel HD graphics
3.Uninstalled Intel and AMD drivers
4. Installed the Intel driver
5. Installed the AMD driver
This doesnt seem to work. Some time after I install the AMD driver, the screen goes black and even if I restart the PC. Only thing I can do is to open in safe mode and uninstall the AMD drivers. I dont know if it does matter but I havent activated the Windows yet (I dont want to by them unless I know that my laptop is fully functional).
This is what I get in hardware ids in device manager for the video controller.
PCI\VEN_1002&DEV_6600&SUBSYS_380117AA&REV_00
PCI\VEN_1002&DEV_6600&SUBSYS_380117AA
PCI\VEN_1002&DEV_6600&CC_038000
PCI\VEN_1002&DEV_6600&CC_0380

4Gen touch stuck on logo screen, reset doesnt seem to help.

Hey guys
i just found my ipod stuck on the logo screen when i tried to start it. I have tried to reset the ipod with the sleep/home button combination but the screen just flickers and then it gets stuck on the logo again. The ipod does come up in my computer but it doesnt seem to show up in itunes. Is there any way to reset this other then the initial home/sleep combination?
Thanx heaps for the help.

try connecting the device in _*recovery mode*_.
also, make sure [_*Apple Mobile Device Service*_|http://support.apple.com/kb/TS1567] is installed and started.
as a last resort, try putting your Touch in [_*DFU mode*_|http://www.podzombie.com/2010/01/using-dfu-mode-to-fix-ipod-touch-and-ip hone-errors>.
JGG

Stuck on logo screen help!!

my phone either turns off or once back on its jus stuck on the apple logo screen. it doesn't acknowledge the charger plugged into it either at any point i mean. please help!!!!!!!!!!!!!

having same problem with my ipad

Windows XP stuck at logo screen

I continue to have "problems" with Windows XP Startup on my iMac running Boot Camp.
I restored my XP back to the point when it last booted without any problem. It then booted without any problem. Then when I restart or shut down and boot again, I am stuck at the XP logo screen again, and I have to power off and start again, choosing to use the last good configuration. I have turned on the switch to generate the boot log file, but it does not appear to have logged anything for the sessions when it did not boot up, but only logged information for the sessions when I chose the last good configuration.
So I am at a loss as to the cause of the problem. I suspect it is some interaction between XP, Boot Camp and the iMac, but I just cannot pinpoint where the cause is and fix it. Somehow some of the values for the XP Control Sets are not quite right or settings are not saved properly when Windows XP is shut down.
Would appreciate any help or suggestions from anyone who has similar problems

Has been resolved. See another post on the same topic by myself, acywong.

Windows Stuck at Logo Screen

I am having problems booting up Windows XP with boot camp because it gets stuck at the Windows Logo screen. I used Windows on my Mac all day at work yesterday and had no problems what so ever. I haven't made any new hardware/software changes to the computer at all lately so it makes no sense why it wont boot up today. I am running the most recent version of Leopard on a MacBook Pro 2.16GHZ Intel Mac. I have also tried booting up in safe mode and last known good config and neither have worked. Safe mode gets stuck with a bunch of command lines on the screen and the last known good config gets stuck on the logo screen again. Also, I tried running disk utility on my boot camp partition (repair/verity) and I got a "Unable to Read Directory Input/Output Error. Anyone have a solution or have had the same problem?

Yesterday I started to have problems booting from Windows XP. It would get stuck at the Windows XP logo screen. I would power down and then start the machine again, it would give me several options to boot, and I would select the last configuation that worked, but it still got stuck at the Windows XP logo screen. Even putting the Windows XP boot disk in did not help, the disk just got stuck in the drive. I tried several times, then left the machine off for about 30 minutes, than tried again, and it booted OK.
I thought it might be the Chinese Data Entry software that I just installed that might have caused the problem, so I uninstalled the software, still the same problem persisted. Eventually after trying several times, and waiting for about 30 minutes, it was OK again.
I think I have to restore Windows from backup back to a point where it booted OK, but I have to first of all be able to boot into Mac OS, which means I have to be able to boot into Windows XP first in order to switch. So it is like a catch 22 situation. Shall I just keep trying till I can boot successfully from Windows XP.
What can I do in future if I am stuck with Windows XP not booting successfully?
Thanks

Ipod stuck on logo screen..

alrite...my ipod mini recently froze so i read the guides and it told me to reset (which i did) and the apple logo screen came up. now it seems to be stuck on the logo screen...no buttons are working...i can't set it to disk mode...and my computer doesnt even recognize it wen i connect it. can anyone offer me some advice how to fix this plz?

Michael,
Do the following
1. Plug your iPod with your AC charger instead of PC for 2 hours
2. Do a reset
3. And a restore iPod updater
If you are unable to get your iPod recongized by your PC, then you have to put it in Disk Mode (u need to plug in with your AC Charger at the same time), and plug it back with your PC.
Read the following for further info
Mitch 751, "Please read before you send your iPod to repairing" #9, 09:30pm Aug 25, 2005 CDT

IPod touch stuck at logo screen

I tried to fix my Grand daughters Ipod earlier today. I installed the latest OS then after the ipod re-booted itself it only gets to the logo screen displaying the words IOS 6. Can anyone help me with this problem or advise on how to reset the ipod please.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Ipod 3rd generation frozen...stuck on logo screen

My ipod suddenly stopped working and went to the apple logo screen. Now it's unresponive. It wont turn off. I tried resetting (holding the power and menu button) but it still isn't working. The ipod logo is green too, not white like normal. I tried plugging it into the computer with itunes running and it doesn't do anything. Can anyone help? Thanks!!

- I would try placing the iPod in recovery mode and then trying to restore it via iTunes. Fore recovery mode see:
http://support.apple.com/kb/HT1808
- Next I would try placing it in DFU mode:
http://www.podzombie.com/2010/01/using-dfu-mode-to-fix-ipod-touch-and-iphone-err ors/

I phone stuck on logo screen

i had it pluged in to my laptop wen i got home early to put a film onto my fone nd it went like this just stays on the apple logo screen nd turns off nd on all the time. i got it pluged into the charger no nd it just keeps goin from the apple logo screen to a black one nd then back to the apple logo screen. What can i do??

http://support.apple.com/kb/HT1808
http://support.apple.com/kb/TS1275
If the suggestions is these articles don't resolve your problem, there may be a hardware failure that needs evaluation. Make an appointment with an Apple Store Genius Bar or whoever provides iPhone warranty service in your country.

P6NGM-FD stuck at logo screen

I've just built a system with a MSI P6NGM-FD mainboard and an Intel 3ghz E8400 Core 2 Duo CPU.
I just can't get it to boot.
The lights on my keyboard blinks for a second and I'm left at the logo screen, asking me to press Tab to POST or Del to enter BIOS.
Well, the problem is my keyboard doesn't work after that.
I've switched the damn PC on and off like a thousand times and it still gives me the same results.
I've checked and re-checked every connection.
Don't tell me to clear the CMOS cos I've tried that too.
At first I thought it might be my PS2 keyboard but after I changed it to a USB one it's still the same.
I'm running out of patience.
I hope somebody can tell me where the problem lies, and how to resolve this.
And I really hope I didn't waste my hard-earned money on an expensive and heavy paperweight.
Here's the specs of my system.
MSI P6NGM-FD mainboard
Intel Core 2 Duo E8400 3Ghz CPU
Seagate 500GB SATA2 HDD
Kingston DDR2 800 2GB x 2
PS2 and USB keyboards tried (both generic brands)
Genius USB mouse
Using onboard graphics
Asus Z45P 450W PSU
:(

I have run into this several times. Your power supply A-45GA does not meet specs for this motherboard.
The +12V1 and +12V2 require a min of 18A. So go with something that supplies at least 20A.
Model Name Input Range Output Voltage Total Output
Input Voltage
Range Input Frequency Range +3.3V +5V +12V1 +12V2 -12V +5Vsb
A-45GA 100~240Vac 47~63Hz Max. Load 30A 28A 14A 15A 0.5A 2A 450W
Max. Output 145W 168W 180W 6W 10W
440W
I ordered this one and the problem went away.
http://www.newegg.com/Product/Product.aspx?Item=N82E16817170019
550W +12V@25A
This issue seems to be common with the Core 2 Quad motherboards from MSI.
I ran into another system with this board in which the power supply was +12V@18A and the on-board USB would power down on boot-up causing Vista to blue screen. I went nuts finding it the first time.

Lenovo g510 stuck in lenovo splash screen

I bought this g510 less then a year ago without an OS.
I've installed win7 first then ubuntu14.04, back when i get it.
Yesterday I deleted my win7 partition and reinstalled a premium sp1 win7 version from a usb formatted as NTFS - as you might have guessed I'm booting the laptop in legaci mode. The installation got stuck and failed and i had to do a hard reset.
After the hard reset the laptop won't boot and in fact it won't even pass the splash screen or respond to fn+f2 or any other shortcut to get into the bios. Even when i shut it off and press the Novo button it starts but doesn't display the blue utility menu with bios and boot options. Ive tried pressing the power button for 30 seconds witn the battery and power cable disconnected and tried to boot from usb but still nothing.
I then took the hard drive out and the laptop would boot and respond to novo button and fn+f2 and i can go into bios. It would also boot from usb when the hdd is disconnected. But it dosen't matter which bios settings i change or if the bootable usb is connected, when i hook the hdd back the laptop will just get stuck on lenovo splash screen again and won't respond to Novo button or fn+12 and it won't boot from usb - i should mention it does respond to capslock or the key to make the screen black (fn+f9).
I have a 1TR samsung sata hdd that seems to be perfectly fine. I don't think its the hdd or any of the hardware and the symptoms are not of defected hdd or anything else i've seen before. It 's also not a uefi problem as i've tried legacy and uefi mode with the same results. Also my usb boot is enabled in the bios just in case you're wondering.
This has ruined my weekend and about to ruine my week. Help lenovo please save me....?!?

hi markwills,
Welcome to the Forums.
If using another drive works fine on the G510 then I suspect that the stock HDD is failing or has corrupt partitions.
Can you consider using a 2.5" SATA enclosure to convert the stock HDD into an external drive and try to format the drive and/or run a hardware scan on it using the following:
- Lenovo Storage Test or
- HD Tune.
- http://www.hdtune.com/faq_1.html
When finished, try to insert it back on the G510 and observe.
If you get errors on the scan or if the above step is not possible, I recommend you contact warranty support on how to go about getting the unit serviced.
Support phone list
Similar thread:
G500 stuck on lenovo screen
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo g510 stuck in logo screen

Similar Messages

Maybe you are looking for