Lenovo G530 Touch Sensor Buttons

I was wondering if there was a way to disable the upper touch sensitive button that disables the lower touch pad. Any help would be great

If you are referring to the uppermost right button above the keyboard, that buttons allows you to turn the touch pad on or off. I've yet to accidentally touch that button -- it's well out of the way. I don't know how to disable it.

Similar Messages

Windows sensor button on monitor stopped working - Yoga Pro 2

I have had my Yoga Pro 2 all of 3 days, and today the sensor button located on the monitor that brings you to the windows start screen has stopped working. When I purchased the laptop, the sensor worked fine - it vibrated when touched and brought me to the start screen. Now, nothing happens. I have installed the 2 updates I was prompted to install, could this be the issue? Has anyone else experienced this problem?

Dear Dettraka
Welcome in lenovo community
Have you tried to reset the machine to the factory setting ?
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

G530 Touch sensitive volume control panel

After a quick reformat of my G530, the touch sensitive volume control panel (four black circular buttons in the upper right part above the keyboard) still works but the volume up/down buttons are in slow increments of 2% whereas before blue rectangular sound bars showed up on the screen when pressed and the sound increased by increments of 10%.
Where can I find the drivers for the touch sensitive volume control panel? I've looked everywhere but can't find them.
Any assistance would be greatly appreciated.
Lenovo G530 4446-35U
Conexant High Definition SmartAudio 221
V. 4.55.0.0
Solved!
Go to Solution.

try to re-install power management from here

Whenever I connect my iPod touch 5th generation to the charger and turn it on, my touch sensor seems to stop working so I cant unlock my iPod without having to take out the charger. Whats wrong with it?

I got this iPod about 3 weeks ago. Whenever I connect my iPod to the charger the touch sensor seems to stop working. When my alarm goes off in the mornings i have to unplug the charger to stop the alarm. I cant do anything while the charger is connected. Any ideas what the problem is or how I can stop this happening?

A few other users have report the same but I have not heard of a solution. Y can try:
- Another cable
- Another USB port
- A wall charger
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

"Universal Laptop DC car charger power adapter" for Lenovo g530

Hey there, I'm a complete tech numskull, so pardon me if this is incredibly naive. I recently made an impulse buy of an off-brand "Universal Laptop DC car charger power adapter" with the hopes of using it in a car with my Lenovo G530. I haven't gotten it yet but after purchasing it, I noticed the power adapter that came with my Lenovo is "AC." Is it possible to us the DC adapter with my laptop, where my cord says "AC"? I obviously don't want to fry my laptop and was wondering what I should look out for. The adapter was pretty cheap, which is another red flag but it also means I won't be out much if I made a mistake in buying it (ebay purchase).
Thanks in advance for your input.

It seems the spare is the new specs. Check these 2 spares. They are the same 4.74amp. http://www.amazon.com/Lenovo-3000-G530-444638U-Adapter/dp/B002Z209G6/ref=sr_1_3?ie=UTF8&s=electronic... http://www.amazon.com/COMPUTER-Power-Adapter-Cord-LENOVO/dp/B002MY2MLM/ref=sr_1_1?ie=UTF8&s=electron...
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Lenovo G530 - problem with certain keys on keyboard

hi everyone.
I have a Lenovo G530 and I am having an odd problem with the keyboard. If i press the spacebar when I type anything, i get the system date and time. If I press the H button, I get a hn and i get nh when I press the N key. Also get gb when I press G and bg when I press B. The rest of the keys are fine. Any ideas what could help???
I has this problem about a month ago and I remember reading somewhere on the net that if I press Alt-Crt-Del and some other key, it shoudl work... and it must have cause the problem stopped. But now it's back and I can't find that combination again.
I have Windows Vista installed.
Thanks!!!

Hello,
I doubt it's a hardware problem at all. I believe it's a "fun" program running on your machine that does this. Someone put it there for you.
A sure way to make sure what it is....... connect a USB keyboard to your laptop. If that USB keyboard is doing the same thing then it's software related, if not, then it's hardware related.
If it is infact a funware there or a virus you'd have to go to a malware forum and ask around. If it turns out to be malware try Spybot Search & Destroy.
-Alex

Left touch pad button fault?

Hi all,
I have had my G570 laptop for about two months after a very bad affair with an HP laptop which went back to PC World twice with the same screen fault, then when I went to collect it, I switched it on only to see the same fault
So they said I could have a new laptop and I chose the Lenovo, bumped the RAM up to 8GB and have been very pleased with it, it feels solid and I wish I had got it from day one.
Now, as the subject says, I have an issue with the left touch pad button. Some times it sticks down, seems to go down further and at a different angle to the right button and just feels like something is not right. Is there anything that I can do to fix it or am I heading back to PC World for a fourth time in as many months
Cheers,
Steve.

Thanks Duck3, I did think as much

X121e touch pad buttons stop working after a while

Hello everyone,
I have a lenovo thinkpad x121e.
The buttons above the touchpad (for right and left clicking) and also the trackpoint stop working after a while (about 45 min). Although the touchpad itself works without problems.
If I reboot the operating system (Windows 7, 64-bit version) everything works fine for a while and then the buttons and trackpoint won't respond again.
It is always the same routine. Rebooting windows, everything alright, stop working, ...
I am using the newest driver version and de- & reinstalling of UltraNav haven't solved the problem.
Has anyone an idea what causes my problems with the touch pad buttons and how to solve it? (I guess it's not a hardware problem.)
Many thanks in advance.

Hi again, li-lup
I would recommend trying to use the standard Synaptics driver found here. Synaptics is the company that develops the UltraNav software, so there should be no loss of compatibility/features. I have witnessed several cases where this driver has helped others with mouse issues, so it may help yours as well.
The first thing you will need to do is to remove the UltraNav driver from the system. To do this, open the Start menu and type Device Manager into the Search box, and then press Enter. Once here, double click on Mouse and other pointing devices, and then right-click on the UltraNav device. Naviage to the Driver tab and select Uninstall... from the bottom of the window. Follow the prompts to uninstall and then restart when prompted by Windows. Windows should install a generic driver that will allow you to use the TouchPad when downloading the Synaptics driver.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

My iphone 5S finger print touch sensor got damaged , replacement of touch sensor will work touch id ?

a local service person damaged my iphone 5s touch sensor while replacing the strip , after that only home button is working , finger print sensor is not working , only passcode option in settings, no touch id n passcode ... replacement of touch sensor will work the touch id ?? plz guide me

It was in warranty (one year) until it was opened.
If it is working (other than fingerprint reading), the safest thing is to just use it with a passcode. It is still better than any other model iPhone.
If you are feeling lucky, you could take it back to your service person. Maybe the cable from the home button isn't connected properly, and can be fixed. There is, however, the risk of more damage, so you can end up with no working phone.
If there is a real Apple store available, they may accept it for a non-warranty replacement. It would be cheaper than a new phone, but a lot of money for just getting fingerprint reading.

Touch sensor isn't accurate

I've been having problems with the touch sensor on my ipod. It started when first bought it last September. I've noticed it mainly when the ipod is charging with the ac adapter plugged into the wall. When i try to touch a certain menu on the screen, the sensor is off and will open up the wrong menu - like if i try to push the settings menu it will open safari instead, or when i'm on the unlock screen when i type in my password the sensor is off and the wrong password is entered.
I noticed it wasn't so bad during the winter and spring when the weather was cooler. With the summer heat the problem has returned.

Does it only do it when it is charging? If so there may be a problem with the charger or the charging circuit in the iPod. I would first rule out a software problem bt trying in order:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Retoring the iPod from backup
- Restoring the iPod to factory defaults/new iPod.
If still problem and you can repordue it, make an appointment at the Genius Bar of an Apple store.

Touch sensor

Hi, im hoping someone could help me with what I feel should be a simple process.
Are there more options with the touch sensor using labview other than simply if pressed/release or bumped, do something? Can they be used to say if bumped once do A, if bumped twice, do B etc?
Many thanks

Sure, you just have to program it
I imagine you are talking about a momentary switch that would send a signal to LabVIEW. If you want to do a case for 1 tap and a different case for 2 taps, you need to figure out how you will count the taps.
If you wanted to measure two taps or more you could start a timer on the 1st tap and count any additional taps for a determined amount of time. At the end of that time count the number of taps and go to the case for that number of taps. But you also have to be careful about how you you count the taps. You dont want to hold the button and have that count as multiple taps. So you might look at peak detection or something that only counts a tap as the signal goes high, but does not count again until the signal goes low before counting a high signal again.
Just think through what you would need to do to count your taps and try to make LabVIEW do it. Post some of your code attempts and ask questions.

MSI GX623 - Aerodynamic Touch Sensor

I want to know about the Aerodynamic Touch Sensor ->
When i bought it I noticed that one of those sensors was blinking by itself, even if i didn't touch it. It blinked so rarely that I never saw it as a problem (I don't use the "previous track" button anyway). But now its gone worse, its blinking so fast that its literally always on. And its even effecting firefox, so now its disturbing.
So i assume its a hardware problem and i have warranty so it would probably be replaced or fixed, but is it possible to shut the touch sensors off somehow? Not the whole thing, just the buttons i don't need.

Quote from: Svet on 23-November-11, 09:51:26
there is cable for this touch panel for this model which not always makes a good contact,
when you remove the battery you will see it, so you can try to move it around or to disconnect it if you dont use it
I didn't see any kind of contact there, except the battery's... So how to remove the panel and reconnect or disconnect it?

Quick Launch Touch Sensors on GX740

Ohai again.
I've got the laptop now, and I've encountered a problem. Not all the buttons on the quick launch touch sensor thing work. At least I think they don't. The multimedia ones (Play, stop, skip, go back) are the culprit. Go back works fine. Stop takes more pressure to work, but it still works. Until today I didn't think that the Play/pause one worked, but after pressing very very hard on it, it worked. I've pressed even harder on the Skip one, and nothing happens.

It's sort of hard for me to do any replacing on this, because this laptop is from the US while I'm in Australia. The most important buttons work (Bluetooth, wireless, web cam, program), and so does the eco mode and movie mode. its only the multimedia ones, which i'd hardly use anywya (as i use global hotkeys with my media player).
but thanks anyway

C6-00. Screen turns off, but touch sensor still wo...

in normal mode (non physical keyboard mode), i use it, everything works fine..
but in physical keyboard mode, once slide it, a few secs later, the screen turns off.. i tried to use the lock button at the side to turn it on back, but, nothing happens, i have to slide n lock unlock it many times to get it turned on again.( BUT SOMETIME, WHEN I SLIDE IT, EVERYTHING WORKS NORMALLY!)
when this thing happen, even in normal mode, i cant revive it back... i take out my batteries, put it back, start, it still doesnt turned on. but with "some miracle", sometimes it does turn on back.. but when i go to keyboad mode again... screen turns off.. same **bleep** happens.
anyone face the same problem?
"what do you mean by touch sensor still works?"
-when the screen turns off(at home screen), i press at the "contact" at bottom right of the screen, the phone does vibrate. proves that the touch sensor works.
fyi, i've tried,
7370
7780
shift + space + del.
these 3 formatting methods just doesnt get this thing back to its normal condition again.
sigh. lost trust in nokia

It is the latest v 20.0.042. In fact, I already reinstalled the firmware again and did a hard reset *#7370# but problem is still there. The display is totally off now either in vertical or horizontal keyboard mode, I have to slide the keyboard a little and hold it there to get the display back, it is too tiresome and is unacceptable. So I highly suspect the it is the sliding keyboard that causes the display problems.
I went to Nokia Care and they said that this phone is no longer under warranty. I will have to pay a substantial amount of money to have them repair it. This sucks

We can not clear all recents(30 recents call). When Tango show "No recents call". We touch other buttons and come back to Recents button again. It still show 30 recents call.

We can not clear all recents(30 recents call). When Tango show "No recents call". We touch other buttons and come back to Recents button again. It still show 30 recents call.

No one here is going to do anything about it. Send feedback to Apple.
http://www.apple.com/feedback/ipad.html
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

Lenovo G530 Touch Sensor Buttons

Similar Messages

Maybe you are looking for