Lenovo G550 and Sagem Fast 800 ADSL modem - limits DL speed to approx. 500kbit/s
Hi,
I bought Lenovo G550 on Tuesday and since then I've got a strange issue with my Internet connection. Until Tuesday I was using Sagem Fast 800 ADSL modem from my ISP on Toshiba Satellite A100-712 notebook since June 2008 with 1Mbit connection and everything was fine - DL speed was 128KB/s (1Mbit/s) as it should, but now on Lenovo the max DL speed I get is ~500kbit/s (60KB/s) and I can't overcome it..
I've done the following so far:
* I have tried on preinstalled Windows Vista - max DL speed I get is ~500kbit/s
* I have installed Windows XP Professional SP3, Sagem drivers installed properly, no unknown devices in device manager - max DL speed I get is ~500kbit/s
* I have installed Windows 7 Professional, Sagem drivers installed properly, no unknown devices in device manager - max DL speed I get is ~500kbit/s
* I've checked download speed on "real" downloads and DSL testing portals (dsl.cz, speedtest.pl, speedtest2.com) - max DL speed I get is ~500kbit/s
* I have turned off energy saving on USB and ADSL modems on all 3 Windows OS mentioned, restarted the PC - max DL speed I get is ~500kbit/s
* I have plugged and checked the download speed on all 3 USB ports - max DL speed I get is ~500kbit/s
* I have installed cFosSpeed - max DL speed I get is ~500kbit/s
* I've called the ISP, they checked the connection (1Mbit shown up in their tests), checked if there are any problems with their infrastructure (nothing was wrong), finally reset my port and asked to check my DL speed - max DL speed I get is ~500kbit/s
* the ISP has sent an onsite technician, guy brought his own HP notebook and Sagem Fast 800 modem (just like mine) to check my connection - on his HP laptop both mine and his modems got 1Mbit/s DL speed, and when I tried both modems with my Lenovo G550, guess what -max DL speed I got was ~500kbit/s on both of them (so it's obvious that it's not modem, line or ISP's fault)
It seems that this issue is notebook related. I'm running out of ideas, the last thing I'm going to try today is to run Ubuntu LiveCD and check my DL speed then, but to be honest I don't expect it to change anything.
Could anyone possibly help me? It really sucks to pay for 1Mbit and have real download speed less than half of it.
Regards,
PW
Similar Messages
-
IMac and SpeedTouch 330 USB ADSL Modem
Hi all,
A friend of mine just received his iMac, he has got an ADSL 2 Mo connection through a Alcatel speed touch 330 USB.
I've downloaded the last driver for Tiger but the modem doesn't work with iMac altough is working well with PC XP, have you got any idea please ?
Thanks,
Peloche,
MacPro 2.66, 6GB, 1TB; Mini G4, 1.45, 1GB; iPod 60 GB; 30" & 20" ACD; Apple IIC Mac OS X (10.4.8) X1900XTHi
You say ADSL2.
USB modem's dont work very well with mac's(even less with intel mac's) as they need drivers, you will be better off getting a ethernet router/modem like a Netgear DG834G wireless http://www.dsl-warehouse.co.uk/product.asp?pr=DG834G or a 4port http://www.dsl-warehouse.co.uk/product.asp?pr=DG834 no drivers needed so no headaches when the OS get updated and the USB drivers get broken.
Tony -
WRT54G and Trendnet TDM-C400 ADSL modem
Hello guys,
I'm having some major issues here, and hoping maybe the community might be able to help.
Just moved, and with the move I chose to move to another ISP using PPPoE.
So I bought a Trendnet ADSL 2 Modem which, when connected directly in my laptop works fine. However, having a few devices to connect, I wish to use my WRTG54G router.
So what I do is plug in my modem in the INTERNET port of my router, no go. I've tried combining many configurations on the router and the modem, and still... nothing!
I'm desperate!!! lol
Thanks for the help, and don't hesitate if you need more info to help!
Thank you!
FauIf you need to set PPPoE try to Follow this link , if it is other than PPPoE you cannot set it.
-
Lenovo G550 - how can I run three monitors
I've just bought a Lenovo G550 and am running Windows XP Pro on it. So far so good. I'm quite happy with it as I think it represents good value for the money.
I have been able to run two external monitors on my G550 laptop - using the VGA port and the HDMI port. But I can't get my laptop monitor to work to make it a third monitor. Has anyone had any success with this and if so how did you do it.
Thank you.
DovetailAssuming, for the purposes of discussion, that the application allows you to display six windows, one for each stock, then if you were to use two 27" monitors, would the six windows properly arranged in the two monitors be sufficiently large to serve your purpose? Your active window areas would be on the order of 900x500 pixels, assuming one of the plentiful 1920x1080 monitors.
Your other option would be two additional PCIe video cards. From page 64 of your user guide, note the following:
Also, from the tech brief on the last G5 towers, note the following on page 10:
With any luck at all, our far eastern friend will be rising shortly and can provide a more definitive answer. -
What is the best ADSL modem to use with AEBS in the UK?
I'm currently using the Netgear DG834G with it's wireless functionality switched off, and my AEBS (gigabit) is set up as a bridge.
When I've tried to resolve various problems such as getting iChat AV working I've got the impression that I might have fewer problems if I let the AEBS do the routing, and simply had an ADSL modem connected to it (rather than a modem/router combo).
What do other people use in the UK, and what success do you have with Skype, iChat etc?
Is there a better way to configure my DG834G so it only acts as a modem? I don't have much technical knowledge in this area, though I have been through the Netgear control panel and sorted out fixed IP addresses.
In some respects, ie. internet browsing, streaming movie trailers on the Apple TV, OS X software updates, all perform perfectly. From that point of view, it seems that there cannot be too much wrong?
A couple of 'by the ways': I also have an Airport Express configured in bridge mode to use with my iPhone and 802.11g MacBook, so that I can keep the Airport Extreme (gigabit) set to work exclusively on 802.11n for maximum performance to the Apple TV. The Extreme and Express are using different frequencies.
I've just ordered the new Mac Pro, which has two Ethernet ports. Is there a way I can put these to good use, for example having a standard network separate from a gigabit network using jumbo frames? I'm sure this is too much to put in one thread, but in a way it's probably best to cover everything together!I use the Linksys ADSL2MUE - which I managed to buy for £12.
I configured it in bridged mode - leaving the Apple Extreme do all the firewall and DHCP stuff.
It's not pretty but does the job. -
Hi ,
I have Lenovo G550 and it crashed. When i used recovery discs .. i got some problem saying" Cant read from the device". So I turned it off and tried with another set of receovery discs i have made. But Now it is saying " Insuffient space and not highlighting patitions in the receovery process step 1. It shouws the partitions but not highlighted. I tried several times.But the same problem. How Can I solve this problem and get recovery done. As I bought this laptop in India and using in UK. I can not call customer service now. Could any one of you please help me. Do I need to do partition again and try recovery or Is there any simpler way. I can not buy expensive partition software. If Partition is mandatory which partitions should i make and in which format?
My Lap Details:
15.4inch Lenovo G550 with 320GB and Windows 7 Home Premium and the processor is Core 2 Duo.
Please help me
Thank you,
Renukait could be because of you re-partitioned the volume. warranty may cover the issue if you have valid one ( international warranty - iws - )
try to burn default backup before ordering dvd sets.
you can order recovery discs. call lenovo support line.
check your warranty from the link below:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=look-iws
if it doesn't work, you can use this software to find your serial.
http://download.cnet.com/Keyfinder-Thing/3000-2094_4-10491989.html?tag=mncol;5 -
Hi, I have a Lenovo G550, and I want to run xna 4.0 but I can´t, because I need to update the intel 4 series chipset ; but lenovo only has a version from 2009!!!!!! version 8.15.10.1994 and the new version is 8.15.10.2555, but intel do not recomend me to install the update because is not designed for Lenovo.
Should I try the update or wait for Lenovo to TAKE CARE OF HIS CUSTOMERS and realese the latest update??You can update the driver from Intel website as it will work properly. However, you may face issue when you increase or decrease Brightness the Onscreen bar will not display
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Hi i just got my Lenovo G550 and i was wondering if there was a way to upgrade the graphics card on it. I know its got a dedicated card in it so i cant just swap it out but i was wondering if there was another type of motherboard that would be compatable that doesnt have a dedicated graphics card that way i could upgrade it
You must to search for FRU list and see if there any motherboard for your G550 that support discrete graphics.
IPnaSh
First Spanish Community Guru - Colaborador ad honorem -
SKY Adsl Modem - Configured on UC520
Hi All,
Firstly I hope you are enjoying the holiday season and spending time with family and friends...
I have a quick question: Is it possible to configure the UC520 and one of the ports to be PPPoA and act as an ADSL Modem?
If so could someone point me in the right direction?
Thanks
Brian
Happy Holidays and Seasons Greetings to AllHi Brian,
The UC500 doesn´t support PPPoA instead it use PPPoE like Paolo said you have to change the router from your ISP to bridge mode, if you need something about the configuration you can tell me.
If it is useful please rate.
Best regards. -
URGENT Lenovo g550 webcam does not show up in Device Manager and all drivers cannot be installed
Hello everyone. So my lenovo g550 webcam stopped working after I did a clean install of windows 7 home. When I go under device manager I do not see any unknow devices. When I also go to show hidden devices it is not there. Could anyone give me information about how to fix this and if the cable to the webcam might be broken. If so, is there a way I could convert the webcam's pin outs to usb to test it. I have split an old usb cable into four colored spots. Not sure if i want to test it though. That would be my last resort. If needbe, can you tell me the pin outs for the webcam. It has five connectors. The reason I know this is usb is because my older installation on windows 7 detected it and said that the usb could be faster. Thanks.
Sorry about that. I've only been a member for a few days. I will remove the post with all Capps. Have a nice day!
-
Macbook failure to use Tiscali's Sagem 800 USB Modem
Dear all,
Bought Macbook yesterday, took today off to enjoy it but spent day trying unsuccessfully to connect to Tiscali broadband via Sagem 800 USB modem, including an hour on the phone to Apple helpdesk (in Greece). Not best pleased. They eventually gave up and tried to transfer me to Sagem, but all I got was an answer message saying they'd all gone home. Triffic.
Could anyone tell me (without using acronyms or abbreviations if at all possible):
1. Will this modem work with my laptop?
2a. If so, what must I do to get it to work?
2b. If not, what would you suggest (ideally, I'd keep with Tiscali and go for a modem that allows my desktop PC and the Macbook to connect to the internet at the same time)?
Many thanks in advance for any help,
SimonHi chaps
Thanks for all the helpful advice. I now have a Netgear DG834G and set it up with (almost) no problems. It took a little longer than 5 minutes mainly because I thought the installation would be quite complicated In the end I chose AUTOMATIC set up on the Built-in Ethernet and bingo - one iMac DV 400 surfing away with NO (as yet) dropped connections. Regarding Tiscali, I have emailed them twice via their website for advice and they have not bothered to reply - if it wasn't just a nuisance to change ISPs I would consider moving...
When my daugher got her MAcbook the other week we fired it up in the garden and it immediately saw the Netgear on wireless - internet connection in about 10 seconds I love Macs /___sbsstatic___/migration-images/migration-img-not-avail.png
Richardv9 -
WOL - add router between ADSL modem and computer?
Hi
My computer is connected to a Livebox ADSL modem (the Sagem F@ast 3202).
I am trying set the system up so it wakes up from sleep at the reception of a magic packet from the internet. I have forwarded port 9 as per instrux on the web. The computer wakes up only sporadically though.
I read long ago somewhere online (but can't for the life of me find it) that one can add another router (between the Livebox and the computer, I assume) which would "listen" for the magic packet and then wake up the computer.
I happen to have an old DLink DSL-604+. Is this something I could add to the chain of equipment to make the setup more stable? If so, how should the DLink be configured?
Thanks for any insight.
/pThanks for the suggestion.
I've looked in the settings on the Livebox and find, under the Firewall tab, something called Access control. It lets me defined a username, password and port using which I may access the Livebox's setup page from the internet.
Apart from this, I find under the Firewall tab something called Policies and NAT but neither appears to be relevant to me. If there's any other disconnect setting I can't find it. I guess it could be in the flash ROM somewhere.
My test indicates that I can access the Livebox setup page without the computer having to be on (obvious). Is there some way to start a sleeping computer from within such a setup page (longshot)?
/p -
WRT54GS2 and Siemens ADSL modem - dropping Internet connection
I am having an internet connection issue. I have a Win98 Desktop directly connected to an ADSL modem - SIEMENS Speetstream 4100. That connection works well.
I had a WRT54G (old school, blue and black) wireless router connected to it which allowed me to use my WinXP laptop in the house. I then upgraded the router to a WRT54GS2, and now I lose the connection to the internet every minute or so while connected through that. The connection between the modem and the router goes down, not the connection to either the desktop (wireless) or the laptop. And if I switch to direct connection through the modem, I get a solid, reliable connection to the Internet.
Is there some problem with the SIEMENS ADSL modem and the Linksys router not playing nice together?
I have tried ipconfig /release and /renew on both my laptop and the desktop, I have turned off all computers, modem, and router, and powered back up in the correct order: Modem, router, desktop and laptop.
Here's the output of ipconfig /all when my laptop is connected directly through the ADSL modem:
Windows IP Configuration
Host Name . . . . . . . . . . . . : ALIENUS_AES
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Eth
ernet NIC
Physical Address. . . . . . . . . : 00-0F-B0-74-0F-FB
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 70.234.142.61
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 70.234.142.62
DHCP Server . . . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
192.168.0.1
Lease Obtained. . . . . . . . . . : Friday, November 20, 2009 1:23:03 PM
Lease Expires . . . . . . . . . . : Friday, November 20, 2009 1:33:03 PM
Ethernet adapter Wireless Network Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 802.11b/g WLAN
Physical Address. . . . . . . . . : 00-90-4B-F3-5E-D6
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.10.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.10.1
DHCP Server . . . . . . . . . . . : 192.168.10.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
Lease Obtained. . . . . . . . . . : Friday, November 20, 2009 1:03:43 PM
Lease Expires . . . . . . . . . . : Saturday, November 21, 2009 1:03:43
PM
Why does the new WRT54GS2 lose internet connectivity when a direct connection through the modem does not lose connectivity and the old one was reliable?
Thanks in advance.
Solved!
Go to Solution.Your ADSL modem is in half-bridge mode. It does the PPPoE connection and then passes the IP addresses, etc. through DHCP to the device connected. Several people seem to have problems with different routers and these modems.
I would suggest you reconfigure the ADSL modem into full bridge mode (i.e. the modem works really like a simple modem and does not connect to the internet itself). In full bridge mode you should be able to configure your router with PPPoE and connect to the internet directly. That should work better.
If the ADSL modem is intelligent enough it may automatically switch to full-bridge mode if you configure the router for PPPoE.
You should see the difference in the DNS servers which the router got. In half-bridge mode the ADSL modem seems to assign its own IP address 192.168.0.1 as DNS server. If you connect directly to your ISP you should see the IP addresses of your ISP's DNS servers. -
Lenovo g550 upgrade hard drive and ram
I have a Lenovo G550 (20023), it has Intel T4300 CPU, 3 GB DDR3 RAM,Intel GMA 4500M graphics card and Windows 7, with 320 GB seagate HDD.
I would like to buy a new HDD.
I found a 2TB Verbatim drive 15 mm height.
How much drive height does G550 support?
Also somewhere it says that 4 GB RAM is max supported, elsewhere it says 8 GB.
Are there any CPUs with integrated graphics (Intel HD 4000 etc....) available for this laptop?
Thank you for answers.Ooops. Yes. Sorry for that silly typo. It is 2 TBs. Here's the info on memory:
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
Good sources for memory include:
OWC
DataMem
Crucial.com -
Cisco 877W router and external ADSL modem
Cisco 877W router and external ADSL modem
In order to support ADSL2+ on a pre ADSL2+ router and in preparation for a later migration to BT infinity I am trying to configure the Router using an external adsl2+ modem appropriately.
The original configuration had 3 ports configured as one (internal lan) vlan and bridge group together with one wireless sub-interface, the remaining port configured a second vlan and bridge group with a second wireless sub- interface. The Dialer was a member of the second bridge group. This way the second wireless interface and associated bridge group provided a kind of DMZ for outbound access.
The configuration I am attempting is similar the lan ports remain the same, but port 0 as a member of the vlan and bridge group (now a pppoe client) associated with one of the wireless sub interfaces as per above. The ATM interface is downed. This nearly works except that if the wireless subinterface on this bridge group is configured the dialer no longer dials giving a 'no dialer string' error. If I do not configure that wireless sub interface all works well.
If anyone is interested to look I would appreciate any comments. I enclose a sanitised config in which you will note the 'commented out' wireless subnet interface (in red).
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname xxxxxxxxxxxxxxxxxxxxx
boot-start-marker
boot-end-marker
logging buffered 4096 warnings
enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxx
aaa new-model
aaa group server radius sdm-vpn-server-group-2
aaa group server radius rad_eap
server 192.168.253.1 auth-port 1812 acct-port 1813
server 192.168.253.1 auth-port 1645 acct-port 1646
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login default local
aaa authentication login sdm_vpn_xauth_ml_2 group sdm-vpn-server-group-2
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa authorization ipmobile default group rad_pmip
aaa authorization network sdm_vpn_group_ml_2 local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
clock timezone PCTime 0
clock summer-time PCTime date Mar 30 2003 1:00 Oct 26 2003 2:00
crypto pki trustpoint TP-self-signed-2834265337
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2834265337
revocation-check none
rsakeypair TP-self-signed-2834265337
crypto pki certificate chain TP-self-signed-2834265337
certificate self-signed 01 nvram:IOS-Self-Sig#2F.cer
dot11 syslog
dot11 ssid GuestAP
vlan 101
authentication open
authentication key-management wpa
mbssid guest-mode
wpa-psk ascii 7 113B162712001F4A2D2B25
dot11 ssid LanAP
vlan 100
authentication open eap eap_methods
authentication network-eap eap_methods
authentication key-management wpa
mbssid guest-mode
no ip source-route
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
ip dhcp excluded-address 192.168.252.1 192.168.252.8
ip dhcp excluded-address 192.168.252.15 192.168.252.254
ip dhcp pool sdm-pool1
import all
network 192.168.252.0 255.255.255.0
domain-name XXX.Local
dns-server xxx.xxx.xxx.xxx
default-router 192.168.252.254
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
no ip bootp server
no ip domain lookup
ip domain name XXX.Local
ip name-server xxx.xxx.xxx.xxx
ip name-server xxx.xxx.xxx.xxx
ip reflexive-list timeout 120
vpdn enable
vpdn-group 1
request-dialin
protocol pppoe
username administrator privilege 15 secret 5 £££££££££££££££££££££
class-map type inspect match-any IN_to_OUT_CLASS
match protocol tcp
match protocol udp
match protocol icmp
class-map type inspect match-any OUT_to_IN_CLASS
match protocol https
match protocol smtp extended
class-map type inspect match-any DMZ_to_IN_CLASS
match protocol http
match protocol https
match protocol smtp extended
policy-map type inspect DMZ_to_IN_POL
class type inspect DMZ_to_IN_CLASS
inspect
class class-default
drop log
policy-map type inspect IN_to_OUT_POL
class type inspect IN_to_OUT_CLASS
inspect
class class-default
drop log
policy-map type inspect OUT_to_IN_POL
class type inspect OUT_to_IN_CLASS
inspect
class class-default
drop log
zone security INSIDE
zone security OUTSIDE
zone security DMZ
zone-pair security OUT_TO_IN source OUTSIDE destination INSIDE
service-policy type inspect OUT_to_IN_POL
zone-pair security IN_TO_OUT source INSIDE destination OUTSIDE
service-policy type inspect IN_to_OUT_POL
zone-pair security DMZ_TO_OUT source DMZ destination OUTSIDE
service-policy type inspect IN_to_OUT_POL
zone-pair security DMZ_TO_IN source DMZ destination INSIDE
service-policy type inspect DMZ_to_IN_POL
bridge irb
interface Loopback0
no ip address
interface Null0
no ip unreachables
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
dsl operating-mode auto
interface FastEthernet0
description Outside Interface (PPPoE)
interface FastEthernet1
description Inside Interface
switchport access vlan 10
interface FastEthernet2
description Inside Interface
switchport access vlan 10
spanning-tree portfast
interface FastEthernet3
description Inside Interface
switchport access vlan 10
spanning-tree portfast
interface Dot11Radio0
no ip address
no ip route-cache cef
no ip route-cache
encryption vlan 100 mode ciphers aes-ccm tkip
encryption vlan 101 mode ciphers aes-ccm tkip
ssid GuestAP
ssid LanAP
mbssid
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
channel 2437
station-role root
interface Dot11Radio0.100
description LanAP
encapsulation dot1Q 100
no ip route-cache
no cdp enable
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 spanning-disabled
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
!interface Dot11Radio0.101
! description GuestAP
! encapsulation dot1Q 101
! no ip route-cache
! no cdp enable
! bridge-group 1
! bridge-group 1 subscriber-loop-control
! bridge-group 1 spanning-disabled
! bridge-group 1 block-unknown-source
! no bridge-group 1 source-learning
! no bridge-group 1 unicast-flooding
interface Vlan1
description $ES_LAN$
no ip address
ip virtual-reassembly
pppoe enable group global
pppoe-client dial-pool-number 1
bridge-group 1
interface Vlan10
no ip address
ip virtual-reassembly
bridge-group 10
interface Dialer1
description $FW_OUTSIDE$
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip nat outside
ip virtual-reassembly
zone-member security OUTSIDE
encapsulation ppp
ip route-cache flow
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname XXXXXXX
ppp chap password 7 xxxxxxxxxxxxxxxxxxx
ppp pap sent-username xxxxxxxxxxxxxxxxxx password 7 xxxxxxxxxxxxxxxxxxxxx
ppp ipcp dns request
ppp ipcp wins request
hold-queue 224 in
interface Dialer0
no ip address
interface BVI10
description Inside Interface
ip address 192.168.253.254 255.255.255.0
ip access-group 101 in
ip helper-address 192.168.253.1
ip nat inside
ip virtual-reassembly
zone-member security INSIDE
interface BVI1
description DMZ Interface
ip address 192.168.252.254 255.255.255.0
ip nat inside
ip virtual-reassembly
zone-member security DMZ
ip local pool SDM_POOL_1 192.168.20.9 192.168.20.14
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http access-class 1
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
ip nat inside source list Inside_Clients_NAT interface Dialer1 overload
ip nat inside source static 192.168.253.10 xxx.xxx.xxx.xxx
ip access-list extended DMZ_to_IN_POL
remark SDM_ACL Category=128
permit ip any any
ip access-list extended Inside_Clients_NAT
remark SDM_ACL Category=2
permit ip 192.168.253.0 0.0.0.255 any
logging 192.168.253.10
access-list 1 remark Auto generated by SDM Management Access feature
access-list 1 remark SDM_ACL Category=1
access-list 1 permit 192.168.253.0 0.0.0.255
access-list 100 remark VTY Access-class list
access-list 100 remark SDM_ACL Category=1
access-list 100 permit ip 192.168.253.0 0.0.0.255 any
access-list 100 deny ip any any
access-list 101 remark Auto generated by SDM Management Access feature
access-list 101 remark SDM_ACL Category=1
access-list 101 remark Auto generated by SDM for NTP (123) xxx.xxx.xxx.xxx
access-list 101 permit udp host xxx.xxx.xxx.xxx eq ntp host 192.168.253.254 eq ntp
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq telnet
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq 22
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq www
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq 443
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq cmd
access-list 101 deny tcp any host 192.168.253.254 eq telnet
access-list 101 deny tcp any host 192.168.253.254 eq 22
access-list 101 deny tcp any host 192.168.253.254 eq www
access-list 101 deny tcp any host 192.168.253.254 eq 443
access-list 101 deny tcp any host 192.168.253.254 eq cmd
access-list 101 deny udp any host 192.168.253.254 eq snmp
access-list 101 permit ip any any
access-list 199 permit ip any host 10.1.1.1
dialer-list 1 protocol ip permit
no cdp run
radius-server attribute 32 include-in-access-req format %h
radius-server host 192.168.253.1 auth-port 1812 acct-port 1813 key 7 XXXXXXXXXXXXXXXXXX
radius-server host 192.168.253.1 auth-port 1645 acct-port 1646 key 7 XXXXXXXXXXXXXXXXXX
radius-server vsa send accounting
control-plane
bridge 1 protocol ieee
bridge 1 route ip
bridge 10 protocol ieee
bridge 10 route ip
banner login C Border Router
line con 0
no modem enable
transport output telnet
line aux 0
transport output telnet
line vty 0 4
access-class 100 in
privilege level 15
length 0
transport input telnet ssh
scheduler max-task-time 5000
scheduler interval 500
ntp server xxx.xxx.xxx.xxx source Dialer0 prefer
ntp server xxx.xxx.xxx.xxx source Dialer0 prefer
sntp server xxx.xxx.xxx.xxx
endHi Jody,
Apologies delay in replying. I have done the following:
Made two of the FE ports vlan1,BVI1 (for LAN traffic)
Left one port as VLAN10 as the pppoe client conected to the externalmodem
Made the last port VLAN10 as well and gave it an IP addess as for a DMZ client.
I have DHCP configured to serve the DMZ addresses.
This all works for LAN clients and also works for a client attachedto that physical DMZ port.
When I added a dot11radio sub interface into VLAN 10 the wireless client did not get an IP lease. Everything else continued to work.
I had never thought about this before, but if a dot11radio interface is on the same vlan (but not being part ofa bridge group) why are DHCP broadcasts not propogating to all the vlan members as I would have expected. I recognise that this isa limit in my understanding.
If I then made VLAN10 a member of a new Bridge Group, I lost WAN connectivity as per original posting.
I cannot add another VLAN due to the 2 vlan limit in this image.
Finally regarding your comment about giving it what it wants, what exactly did you have in mind. The dialer already has a dial string parameters configured.
Think I am about to give upon this.
Regards,
Maybe you are looking for
-
I bought a used 5800, and yes, it is a old, 2,5 year old phone with latest software, works good. Only problem is that the vibration doesnt work. No matter is it on or off on profiles, it doesnt vibrate. And it doesnt vibrate even when i turn phone on
-
Trying to record with an external mic, but having trouble getting a good record or playback volume. As far as i know all my settings in system preference are correct. What am i missing?
-
Function Module to retrieve Campaign details.
Hi All, Please tell me the name of the Function module to fetch the details of Campaign according to external id. I need to fetch 2 fields :- 1. Planned Start Date 2. Planned End Date Regards, Raman.
-
Hi... I have installed a 2GB mamory card in my 6300 and set up camera to use memory card for both photos and for video also. When picture is taken the camera goes straight into standby mode,does not show the image just taken and does not save or give
-
Mba freezes and than can't reboot (question mark in folder)
My mba acts kind of crazy lately. It suddenly freezes and when I try to reboot it doesn't find my ssd and gives me the dreaded question mark in folder sign. When I try recovery mode it doesn't show my ssd, but if I keep trying sometimes after a few m