Lenovo G555 will only start 1 in 10 times

Good day all
I have a Lenovo G555 that will only start about 1 in every 10 attempts and is slowly getting worse.
When it does come on, it seems like I have to hold the power button for 15 seconds and when I release it - and if I'm lucky - it may start.
Does anyone have some ideas on what the cause might be? When it does turn on, are there some diagnostics that I can run to pin point the problem.

Hi Andrew,
I’m sorry to hear that the issue persists even after performing Flee-Power troubleshooting step in your G555, the only available option to check the issue is to turn ON the Laptop using AC Adapter only without the Battery connected and if the issue persists, performing OSRI (Operating System Re-Install) will confirm that the issue is Hardware related.
To perform OSRI click on OKR (One Key Recovery) button in the computer, below is the link to download the User Guide for the steps to perform OSRI and refer page no. 1 to locate the OKR button and page no. 22 for the steps to perform OKR.
NOTE: Please backup the data in the computer before performing OSRI, as the data will be completely erased.
Lenovo G555 User Guide
Hope this helps!!!
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Firefox 4 beta8 will only start in safemodus but not normaly

I use firefox 3.6.13 parallel to firefox 4 beta 8. Beta 8 will only start in safemodus, not in the normal form. In former time, beta 7 starts without any problem

I have firefox 3.6.13 and 4.0b8.
Beta is installed by default in a different location. I have also set it up with its own profile. I have not noticed problems. I am assuming the compatibility checker worked as it set itself up without firebug, as that was not compatible, I later installed a firebug alpha for the firefox beta.
To create additional profiles the easy way use [[Managing profiles|Profile Manager]]

My iPod Classic (the older version) will only start up, what to do?

My iPod Classic (older version) will only start up but as soon as it starts up it turns itself off again and it makes quite a loud clicking sound when it turns itself off, I have had it plugged in for quite a while and in the first 30 minutes of having it plugged in it said very low battery but then turned itself off, I have tried resetting it with the menu and the middle button and I can't connect it the computer that it has been synced with either, I really need my iPod and I really don't know what to do to fix it, is it the battery or the cable or something small like that? I'm not sure whether it is charging from the wall socket either.

- After being connected tot a charging source for half an hour, reset the iPod.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Connect the iPod to your computer and and if it shows in iTunes restore the iPOd.
- Next see if placing the iPod in recovery mode will allow you to restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
Sorry I missed that you said you dried it in your first post.

I downloaded the Final Cut Pro X trial but my movie is 17 minutes long but it will only Share to Quick time 6:55 minutes. How do I fix this and export the full 17 minutes?

I downloaded the Final Cut Pro X trial but my movie is 17 minutes long but it will only Share to Quick time 6:55 minutes. How do I fix this and export the full 17 minutes?

Thank You. Im trying to export everything. I pressed command A and then did the Share button. Ill attach the screenshot please let me know if I need to change something.

Systemuiserver will only start as root

Hi Folks,
I'm a bit stumped by a problem I'm having with SystemUIServer on one of our Leopard laptops. Recently it has developed a problem where SystemUIServer will not start at login time as the user. It segfaults over and over again via launchd. I have tried removing the relevant preference files and even synced a known working /System/Library/CoreServices/Menu Extras/ directory and still no dice. However, if I drop to the command line and launch SystemUIServer as root manually:
sudo open /System/Library/CoreServices/SystemUIServer.app
The app will launch and run until the user logs out, and display all of the menu extras, etc, in exactly the right place. I cannot seem to get any debugging info out of SystemUIServer when it starts up and segfaults as the regular user, so I have no idea what's causing it.
Any suggestions on how I can get more debugging info out of it?
Thanks,
Brandon

which preference files did you delete? make a new user account and see if it works there. btw, there is no reason to use sudo in that command. it adds absolutely nothing to it because you use "open" the application will still be opened by your user. if it works with sudo it should work without it as well.

HT1657 My rented movie will only start when I am using wifi?

My rented movie will only start when I am using wifi?

try connecting a headset and call it if it rings in the headset then its this hardware issue
read
https://discussions.apple.com/thread/1343532?start=315&tstart=0
and more
iphone stuck in headphone mode

We have an Ipad and two Iphones. We have an internet radio program we like. One of the phones plays it fine the Ipad and other Iphone which sync on the same computer will only play a short time and we can't reconnect again until the following week? They a

Hi there. We have two iphone 3gs' and an Ipad 2 all operate on IOS 5 but one of the iphones syncs on another computer. The other two sync on our other computer. Those two will only play internet radio for a short time and then they stop playing the program while our third will play all the way through and we can always get back to the program. Does anyone have any thoughts as to why this happens? Thank you

Here's how to do it.
1. App Store, iTunes Store should have the same AppleID on Computer and iPhones. (Free to share apps, music and books... )
2. Person A uses the same purchasing account for everything (ie. email, contacts and ...).
3. Person B have the same purchase account see no. 1 (for App Store and iTunes Store) but create a second AppleID for iCal, e-mail, contacts and etc.

IMac won't start in mac. Will only start in Windows, option key won't work to allow me to get to mac side. downloaded avast last week. Worried this could be the problem??

iMac was making a strange sound yesterday. I shutdown and restarted now it will only boot in windows vista. I've tried option key that doesn't work, I've tried command R no luck. I've left un-plugged, not sure what to do. I don't even get the white screen like it's trying to load, it goes directly to windows vista, once in windows I can't get anywhere to try and go back. I did download avast the other week, it seemed to be running fine until yesterday. UGH

If you are running OS X "Lion" or later, boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. For Snow Leopard, start your Mac while holding the c key with its original OS X Install DVD inserted in its optical drive.
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
If you manage to boot OS X, uninstall Avast. Its effect on a Mac has progressed from complete and utter worthlessness to maliciousness.
Be sure to use its latest uninstaller, which will remove it completely.

Lenovo tools will not start

Hi All, I have had my Lenovo W520 for a year now and just when my warranty expires something goes wrong. Its not major but is important for me.
None of my lenovo apps will start up. They begin to but immediatly just freeze before opening. This is bad since I do CG architecturual rendering and I need to access turboboost. The access connection tool wont even open so I have to connect from the windows toolbar. Is there any reason for this happening and is this a common occurance. O
Lenovo W520 Quad Core I7 @2.2 Ghz 16.GB Windows 7 Quadro 2000m

One thing is making sure the GAC on your machine is up to date. Look for ngen and force update. Make sure you are up to date with Windows .net updates. I am really not sure beyond this. I have my own tvt issues, lol. I noticed that Intel interface tools igfxext errors seemed to occur around using some of the Lenovo tools. .net is common between them so I thought of that, though I have not looked any deeper to be honest. I just deal with it for now lol. But hopefully one of these two steps can help. Is it all the tvt tools? I would suggest you could try reinstalling the invidivual tvt apps and seeing how that works for each as well (though you should not need to do this if step one,two is fine, your issue could be elsewhere). Someone else may wish to add more. You may also wish to check the Thinkvantage Tools part of the board.
Cheers

Itunes will only start up once

hi
i think i need some help! i've had problems mainly due to my own studipity! i installed the standalone quicktime and that sort of helped. but now itunes will only open once if i close it down and try to open it again it wont open. i have to restart my pc. i also have to acept to the terms and conditons when it opens.
i also havent been able to access the music store today not sure if its just me or itunes is having trouble.
i'd really appricate any help
i've never posted on a forum before so if i've left any vital info out let me know!!
thank you

we're still not done yet.
actually, the odd thing about your case is not so much that you aren't able to open itunes again ... it's that you can open it again after you restart the PC.
so let's try an experiment.
get itunes running again. while it's running, launch your Task Manager, and go to the processes Tab.
you should see an "itunes.exe" process in there.
now close itunes down.
does the itunes.exe process persist in Task Manager sfter you shut itunes down?
if it does persist, try shutting that process down in Task Manager.
if you can do that, are you then able to launch itunes again (without shutting your PC down first)?
love, b

Computer will only start up to Darwin

I've got this problem where my computer will not start up in OS X; it instead starts right up into Darwin, and I haven't been able to figure out how to get it to start up into OS X again. Any ideas?

The previous poster's instructions are for resetting your Mac's NVRAM. That won't erase your hard drive, but it is a good idea to back everything up.
The easiest way to backup your hard drive would be to find a friend with a Mac and a Firewire cable. With both computers turned off, hook them together with the Firewire cable. Turn on your Mac while holding down the T key in order to boot into Firewire Target Disk Mode. This essentially turns your Mac into an external hard drive. Now, turn on your friend's Mac and when it gets to the Desktop, you'll see your Mac's hard drive there. Copy your files to his computer or burn them to optical media. After you've backed up your files, drag your hard drive to the Trash to eject it. Unplug the firewire cable and press the power button on your Mac to turn it off. Now you can begin troubleshooting your Mac.
Good luck!
PowerMac G5 Mac OS X (10.4.6) 1GB RAM, nvidia 6800 ultra, Apple 30" Cinema Display

My macbook will only start in safe mode.

I think my Mac is dying. It got really slow and started showing the beach ball, then it would just freeze up. I would have to restart it. For a while, it would restart just fine, then it would take forever and show me the gray screen. Then, it wouldn't even start from there. So I started it up in safe mode, and did the disk repairs, updated my software, got rid of all my startups, put all my icons into a folder on my desktop, and ran the fsck. The fsck said nothing was wrong, but it still won't start in regular mode. I did get plenty of disk0s2 I/O errors. So I think I'm dead in the water unless anyone can help. The only thing I haven't done was erase the hd and reinstall, because I lost my start up disks a long time ago. Everything I need is backed up on an external hd, so a complete wipe and reinstall would be okay.

Purchasing the original startup disks should not be expensive. That is a straightforward approach.
If you think the drive will be toast soon anyway you could purchase a new internal drive, an external USB enclosure, and Carbon Copy Cloner. Install CCC on your existing system. Put the new drive in the external enclosure. Use CCC to clone your old drive to the new one. Physically swap them.
A silver lining is this is an opportunity to upgrade to a significantly faster disk. The Seagate hybrid SSDH drives (500 GB or 1 TB) include an 8 GB SSD cache that really boost disk speed.

My macbook pro will only start-up in grey screen

hi, i have a potentially big problem
I have just purchased macbook pro 15 inch 2.0 GHZ and tried to transfer data using the migration assistant.
i started have numerous problems like i did not have permissions to open folders - i found out how to solve that from this forum and it worked
i had more problems though with Teamviewer - it would not open - came up with an error message 600, so i downloaded the newest version which also wouldn't open.
and basically it just got from bad to worse.....
so i thought that i would then try to do a restore from 'My Passport for Mac' external hard drive.
then i got numerous messages popping up saying 'system extensions cannot be used' etc
i tried numerous times to restart new laptop, shutdown or even hard re-boot and it would not
so i went into SYSTEM / LIBRARY / EXTENSION and started deleting the files that it said were not installed properly
the list went on and on and on so i deleted the whole contents of extension folder - it was only then that the laptop would restart
BUT - now that it has restarted i get the restart 'sound' a grey screen with the apple icon in the middle - no cursor and some small writing in the top left hand corner (looks like CMD mode) and amongst the jargon it does say 'unable to find driver for this platform'
what on earth have i done ?
please help
thanks
Serena

i found the answer to my question on this forum - see below, hallelujah.....
This solved my question by Franco16 on Jun 13, 2012 3:13 AM
I found the solution, thanks to MrE_the_Great (read following cut and paste)
I'm glad it worked out. I'll put the steps below again for others who join this discussion late and to clarify as I was typing on a phone last night while my MBP was re-installing.
1) Hold in command-r while rebooting (or from cold start) to boot to the recovery partition.
2) Chose re-install mac osx
3) Enter appleID credentials
4) After the re-install is complete (may take a while depending on your intenet connection etc) all your files, preferences, and software will be there, you shouldn't lose anything.
5) DO NOT reattempt the Thunderbolt update. You can update the iPhoto and other updates that Software Update finds...just DO NOT check the Thunderbolt one or you will be at step one again.
for more information go here https://discussions.apple.com/thread/4020399?start=60&tstart=0

After power cut, iMac will only start in safe mode.

When starting up the grey progress bar gets about one third of the way across and eventually switches to a blank grey screen The cursor is visible. It never progresses to the normal desk top.
It does start up in safe mode and shows the normal Yosemite desktop.
iMac is mid 2007 running Yosemite. 2.4 Ghz Intel Core 2 Duo, 4GB 667 MHz DDR@ SDRAM, ATI Radeon HD 2600 Pro 256 MB graphics.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Fonts 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\//&&/\/(Lib|usr).+\/(.+\.framework|Contents|Info\.plist|Resources|Versions)$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/(Content|Resource|Version)s(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/[AD]/d;p;' 's/Pr.+n //p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' 1,/$P/d;/e: Pe/{ n;s/^.+://;b0'$'\n'' };/^ +Man.+: ./{ s/ \(0x.+$//;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n//;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1'|sort';};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1'" {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} "`S2 ${p[35]}`" );N1=${#c2[@]};for j in {0..10};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Stylesheet );N3=${#l[@]};for i in {0..3};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 24 22 29;B7 12;B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;C3 29;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+10)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 58 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 58;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

PB will only start in target disc mode, please help

On normal start up, I get the "You need to restart your computer......" message with start symbol behind the writing. every time I try to restart the same thing happens. I've tried all the keys on start up tricks and the only ones that work are option/startup where I can choose Hard Drive, OS Disc, or Hardware tools. If I choose Hard Drive, it goes back to the kernal panic screen with "you need to .....". If I choose OS Disc, it goes to a light gray screen with the apple symbol in the middle and just stays there (also does this if I try to startup holding C with startup disc). If I choose Hardware Tools, it lets me test the hard drive and everything checks out fine but when I restart back to the "You need to restart.....". It will also startup in target disc mode hooked up to my iMac. All of my apps and files were there so I transfered everything, whew! I can then insert the startup disc into the PB and it comes up on my iMac in target disc mode. I then try to open and reinstall OS 10.4 but it tells me I have to restart to start the process and I can't do this in target disc mode. I just ant to be able to erase everything on my PB and reinstall OS 10.4 with the PB start discs. Is this possible? thanks....
J.R.

Seems to me you have made all the right conclusions yourself: your HDD checks out fine, you were able to retrieve all your other files in Target mode, so it must be some corrupt OS files.
You just need to startup from your 10.4 install CD#1. To do this, just put the cd ready in its slot, push the power button while pushing the C key at the same time, and gently push in the CD whenever the system is ready (hold the C key while doing this and for as long as needed to hear the PB starting up from CD). If this works, you'll be duly prompted for the rest of the install process.
Before restoring your backup, it may be a good idea to restart in target mode and recheck the hard drive in Disc Utility or preferably Techtool (run a surface analysis to make sure the disc has no bad blocks). If you find any bad blocks, discard the harddisc: it will have caused your OS to be corrupt, and is not to be trusted anymore.
Good luck!

Lenovo G555 will only start 1 in 10 times

Similar Messages

Maybe you are looking for