LENOVO G560, BEEP SOUND ON STARTUP & SOME NUMERIC KEYPAD BUTTONS NOT WORKING

My g560 sounds continous beeps while starts ups, some numeric keys on right side not working like 2, 4, enter key, etc.
some times the number 2 keys works automatically any time while working on WORD file or on run command.
 whts the problem,, plz advice.

Hi abgautam00.
Welcome to Lenovo Community Forums!
If your system still boots to windows ok,
    I think it's a stuck key that's causing the beep
Try Installing this Software test
http://www.passmark.com/products/keytest.htm
Run this app within Windows and without pressing any keys see if there is a stuck key as it will light up on this tool
Let me know your findings
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Number 2 key on numeric keypad does not work. All other keys work properly.

    The number 2 on the numeric keypad does not work.  Is there some way to clean it?  If not how do I go about ordering another keyboard?

    inside the remote there is a micro switch for each direction each can break
    so yeah you could be the first who write about the right arrow key microswitch being broke in your atv

  • LR 2.6 Numeric Keypad + Does not work

    Windows XP sp3 -- I have searched and noted others have this problem, but have not been able to find a solution or workaround.
    How can I get my numeric keypad + sign to work with LR (as it does with CSR 4)?
    Thanks
    Mike

    Thank you sooo much for this answer. I use an iMac G5, but still, had apparently done the same thing. It was so nice to find this solution and be able to fix it.

  • G550's numeric keypad does not work as it should be

    Goodnight everyone, recently bought a laptop lenovo G550. He has a numeric keypad and one thing is making me confused. The key should be a dot "." is actually a comma ","..... what should I do? I tried everything ... My current setup is Portuguese Brazil ABNT 2
    Please Help-me
    Stevan Cseke
    Brazil
    Note from Moderator:  Private information removed for your protection.

    try this : http://windows.microsoft.com/en-US/windows-vista/C​hange-your-keyboard-layout

  • Apple Bluetooth Keyboard: Numeric keypad keys not working

    Hi I have a G5 PPC and the 4, 5, 6, and + (all in a row) keys on the numeric keypad stopped working. Replaced batteries and re-paired the Bluetooth—no joy. Tried cleaning under these keys with a blast of air and it didn't help either.
    Any ideas? Appreciate any advice. Thanks
    Message was edited by: persist

    I don't think there's any way to take the board apart, my suspicion is that whatever mechanism causes them to register is warped or damaged in some way. I would think that repairing the board would not be cost effective, a new one would seem to be the way to go. Sorry that there's not a clearer answer.

  • Just purchased a WKP-1314 bluetooth numeric keypad and not working

    Just purchased a Apple WKP-1314 for my new IMAC,
    Followed the instructions and it paired right up and then lost connection, then connected and then lost connection.
    Trying to find out if some else has had this problem with the unit before I make the 35 minute ride back to the store.
    Searched this site for it found nothing hoping others are using it or tried to get some inout thank you.

    Hello:
    Before you return it, try a couple of things:
    1.  Reset the SMC.
    2.  Reset the PRAM.
    If that does not help, take it back for replacement.
    Barry

  • My MacBook late 2008 10.7.5 making a beeping sound at startup

    My Mac Book late 2008 10.7.5 is making a beeping sound at startup before the Apple chime.

    Hello,
    If you haven't done anything to the MacBook liek add extra memory then try the following
    Resetting PRAM: http://support.apple.com/kb/HT1379
    Else try resetting SMC : http://support.apple.com/kb/HT3964
    It could be a memory problem, so try removing one memory each at a time to see if that stops the bleeping.
    If that does resolve the bleeping, then your MacBook may need replacement memory modules.
    Best of luck

  • Continuous beeping sound on startup no display,fan is running,power light is off ?????

    continuous beeping sound on startup no display,fan is running,power light is off ?????

    Hello,
    The following table lists the new tones and their meaning:
    Tone(s)    Description
    1 tone, a 5-second pause, repeat    No RAM installed
    3 successive tones, a 5-second pause, 3 successive tones    RAM does not pass data integrity check
    1 long tone when holding down the power button    Firmware upgrade in process. See About firmware updates for Intel-based Macs for more details.
    3 long tones, 3 short tones, 3 long tones    Firmware restoration from CD in process. See About the Firmware Restoration CD (Intel-based Macs) for more details.
    http://support.apple.com/kb/HT2538

  • Numeric Keys and some other keys are not working

    Hi,
    I am having T60 2613 HNU model, ,the problem i am facing issue in keyboard.
    following key are not working
    numeric keys are not working
    end key is not working
    left arrow is not woking
    working keys are as follows
    5,6 is working
    all alphabet keys are working
    I have even updated the bios also not working, I went to bios and made to load default value. my problem is not solved
    i try to remove the xp and tried to go for Fedora 12, there also i am facing the same problem.
    Do any body have solution of this. , please help me.

    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62911
    run the above software. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • I'm getting a random beep sound when I hit the input button to record a turntable

    I'm getting a random beep sound when I hit the input button to record a turntable & mixer plugged into the mbox thats bleeding into the recording. How can I stop this? Please help me. It's happening if I'm recording or not, as soon as I hit the (I) input it beeps randomly.

    Thanks Jim,
    Seems to be this song. Other projects don't have this issue.
    I even took and opened the project on another computer, bounced it again and got the same "click" at the same 13 second area.
    I've bounced each track solo, listened and NO click at the 13 sec. mark
    No third party plug-ins.
    The click doesn't land close to any beginning or end of a region.
    Final mix down looks good, no peaking over 0db.
    This is making me nuts!

  • TS3694 No sound and ringer button not working. I cannot play music but when I put my Iphone 4 on the dock it plays music. This happens when I updated my phone to IOS 6.1.3..The phone doesnt have any carriers we only used this just like Itouch. Please help

    Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.

    Hi there,
    Thanks for reaching out to the community.
    Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
    It appears like you may have a hardware issue with your ringer button and internal speaker that came to light after the update. If you have already restored your iPhone back to factory settings using iTunes, you may need to have your phone serviced.
    Some potential good news... Check your headphone jack for lint. There may be enough to cause a muffled connection. You can try to blow it out with compressed air or very carefully pulling out any solid objects that may affect the connection.
    Best of luck!

  • Mbp numerical keys are not working

    my macbook pro was using last one year now the numerical keys are not working find a solution

    It sounds like what I have seen multiple times on a device with moisture damage.
    Even sitting on a bathroom counter during a hot steamy shower or bath can cause keyboard and trackball problems UNTIL properly dried out.
    It really is more common than you think.
    1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
    2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
    3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
    3. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
    *Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
    Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
    On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
    On the dashboard of your car on a sunny day
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Hi. I have a ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.Also my home button isn't working.

    Hi. I have an ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.For ex. when i hit 8 (which is the second number in my passcode) the number 5 type in. Also my home button isn't working. Hope that was specfic enough.. thanks!!

    Place the iOS device in recovery mode with one of thes programs and then restore via iTunes
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:

  • [svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

    Revision: 5019
    Author: [email protected]
    Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
    Log Message:
    ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
    QE Notes: None
    Doc Notes: None
    Bugs: -
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

    Hi DST
    This is a great effort and gesture. thank you on behalf of all the newbies.
    PJ

  • The optical drive red light stays on, no sound in OS X, the car charger not working

    The optical drive red light stays on, no sound in OS X, the car charger not working, I think that its all tied to 1 error or 1 issue, maybe something to do with the boot camp file?
    Any ideas ?

    Hi S,
    There is a switch inside the audio jack that may be stuck. Try gently inserting, wiggling, removing the audio plug.

Maybe you are looking for