Lenovo G565 dont work with SATA II ?....BIOS limited ?

I bought the lenovo G565.
But that does not support SATA II?
My Hitachi SATA HD in SATA II works in SATA I !
The BIOS limits the use of SATA?
With SiSoft Sandra software is that the motherboard can work with SATA III !
chipset installed : AMD RS780/880
CPU Phenom II  triple-core N830
Bios upgrade ?
Thank.

i don't think bios update will solve your issue. it's about hardware support and it seems your g565 doesn't support sata 2 interface.

Similar Messages

  • Spell checking dont working with "Automatic by language" option

    Russian spell checking dont working with "Automatic by language" option in Sys. prefs.

    Let Apple know at
    http://www.apple.com/feedback

  • Adobe Flash Media Encoder dont work with Easycap usb video capture

    Hy...
    I installing ADFME 3.2 but it dont work with Easycap usb video capture.
    The ADFME crash.
    Can you help me?
    tks
    Marco Aurelio

    Hi Kyngg,
    Can you advise how you managed to resolve this problem?
    I'm having a very similar issue.
    Thanks,

  • KT4 Ultra-SR (MS-6590) dont work with AMD Barton 2500+

     ;( Please help me any1.
    I have MBO KT4 Ultra-SR (MS-6590) with CPU AMD Barton 2500+ and i have a big problem. System corectly boot only if a select CPU FSB Clock = 100 MHz (CPU Ration/CPU Vcore/DDR Voltage=all AUTO). When a select CPU FSB Clock 133 or 166 MHz, system begin run corectly and after few second turned OFF. I selecting SDRAM Frequency on=AUTO/266/333/400 MHz but not working. My old CPU is AMD XP Palomino 2100 MHz and work fine with KT4 Ultra MBO. I upgrade BIOS with 1.4 version. I change memory module with PQI (PC 2700/256 MB) and JETRAM (PC 2700/256 MB) but is same ":censored: ". System dont work. Bad CPU Barton 2500+? I dont no. Please help me any1.
    My System:
    MBO KT4 Ultra-SR (MS-6590)
    CPU AMD Barton 2500+ (FSB 333)
    Memory DDR Samsung 2x256 MB (PC 3200) K4H56083D-TCC4
    Cooler SPIRE WhisperRock IV+Artic Silver 3
    HDD Seagate Baracuda 120 GB SATA
    PSU Enermax 300W EG301P-VE(FMA)
    VGA Saphire ATI Radeon 9100 (64 MB+TV/DVI-out)
    DVD-ROM Pioneer 120S (16x speed)
    CD-RW MSI CR52-A2 (52/24/52, Atapi)
    FDD Teac 1.44 MB
    Creative SoundBlaster Live! 5.1

    Most of the time, this sort of problems arise because of power suppliy issues.. U have a enamax 300W PSU which is a VERY GOOD PSU but might just be on the line...
    If u can, try swapping the PSu for a good 400 or a 420W PSU.. this might solve your enigma.. I really dont think this is your processor...
    Read this two articles on PSu wrtten by one moderater which will aid in solve in fixing your problem (PSU1 , PSU2 , Troubleshooting Guide )
    Best of luck
    RAsika

  • HD Led not working with SATA drives on MSI K7N2 Delta

    I noticed the HD led does not work with the SATA drives on my MSI K7N2 Delta ISLR
    I confirmed that the led is not burnt out by reconnecting a spare IDE HD with XP on it to IDE 1 and the led worked when there was activity, but it does not work when connected to IDE3 or if the SATA drives are connected to Serial 1 & 2.
    Could it be because the motherboard doesn't support and hdd led for the Promise SATA controller.
    I had Bios v7.3 and flashed to v7.4 with no luck.
    Could a new bios update fix this problem?
    Anybody seen this before?

    basically it not wired up so works for no one

  • KT6 - HALT detection doesn't work with 5.5 bios!

    I am even more amazed by MSI faults....
    With bios 5.2 the HALT detection didn't worked on KT6 Delta series
    With bios 5.4 the HALT detection work
    With bios 5.5 it doesn't work again....
    Great!

    Well maybe it just needed to to refreshed like alot of things do
    But if it works now then your set

  • Lenovo usb drive works with MBA

    I tried an external usb drive that came with my lenovo x61s at work. Works fine. Just though I would let folks know. It is larger than the superdrive and may be more expensive, but if you have one or know someone who does then it will work.

    couple of things to try:
    _*Checking a device’s USB connection*_
    _*If a USB device isn’t working*_
    you could also try starting up in _*safe mode*_, then reboot normally, to see if that fixes things.
    lastly, you could run _*Apple Hardware Test*_ using the install DVD that came with your machine.
    JGG

  • Logic Pro dont work with ProTools HD3 with XD card and Apogee converter's

    My Logic Pro dont want work with ProTools HD3....
    I have G5 dual Core with 2 GO Ram, and ProTools HD3 and a Apogee converter's (with XD card extention).
    I have in the same comuter Logic Pro 8, and i can't use the DSP of ProTools HD, and the Logic Pro plug-in and Protools HD plug-ins dont want work too.
    I contacted Apogee, Digidesign and Apple for this problem, but anyone have the solution....

    Hi DMS Debah
    I got PT HD 2 and works great here !
    TRY this : http://duc.digidesign.com/showthread.php?t=54888
    Download this :http://www.digidesign.com/index.cfm?navid=54&itemid=25974
    Read this : http://en.440forums.com/forums/lofiversion/index.php/t38958.html
    try to change your Logic audio drivers ! you'll see there is(select it ) DAE
    driver, TDM option and Core audio driver! You have to chose DAE driver then
    reboot the logic Pro then it will work
    Best,
    u
    PS : Si tu ne peux pas le faire on va réessayer
    Message was edited by: jannhewi
    Message was edited by: jannhewi

  • Will my Lenovo W510 WiFi work with a 2.4:5Ghz Netgear N600 WNDR3400 dual-band home broadband router?

    My first post ever ... so please be gentle with me.
    BACKGROUND:
    1. I'm considering a new router to replace my Linksys WRT54G.
    2. The Netgear N600 WNDR3400 dual-band home broadband router has a simultaneous 2.4Ghz & 5Ghz AP capability.
    3. While I know my Lenovo W510 WiFi works fine at 2.4 Ghz (802.11G), my question is:
    QUESTION:
    Q: Will my Lenovo W510 laptop wireless card connect at 5Ghz?
    NOTES:
    Note: The OS is Centos 6.3 Linux (x86_64).
    Note: I'm not sure how to tell you WHICH wireless card I have, so I googled and tried this command:
    $ /sbin/lspci -knn | grep -i network
    WHICH REPORTED:
    00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit Network Connection [8086:10ea] (rev 06)
    03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 35)
    $ /sbin/lspci -nn -s 03:00.0
    WHICH REPORTED:
    03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 35)
    $ /sbin/lspci -vv -s 03:00.0
    WHICH REPORTED:
    03:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35)
        Subsystem: Intel Corporation Centrino Ultimate-N 6300 3x3 AGN
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 32
        Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: iwlwifi
        Kernel modules: iwlwifi
    $ /sbin/modinfo iwlwifi
    WHICH REPORTED (edited):
    filename:       /lib/modules/2.6.32-279.5.1.el6.x86_64/kernel/driv​ers/net/wireless/iwlwifi/iwlwifi.ko
    alias:          iwlagn
    description:    Intel(R) Wireless WiFi Link AGN driver for Linux
    ... stuff ...
    parm:           11n_disable:disable 11n functionality (int)
    parm:           5ghz_disable:disable 5GHz band (default: 0 [enabled]) (bool)
    ... stuff ...

    As an update, I bought the WNDR3400v2 router and am supremely disappointed with its lack of power - but - the Lenovo W510 DOES work perfectly fine connecting to both the 2.4Ghz and 5Ghz radios.
    The problem is the signal strength only twenty feet away up one floor is dismal (as compared to what it was with the ancient Linksys WRT54G for example).
    What bothers me is that Netgear goes to great lengths to hide the power output of the radio so I 'suspect' that it is anemic and I don't (yet anyway) suspect the radio on the W510 laptop. Netgear support would only tell me the EIRP at 2.4GHz is 20dBm, and at 5GHz it's double that. So I can only assume the power output from that. If I assume a 5dBi antenna gain for both frequencies, that results in a power output guesstimate of 15dBm (32mW) at 2.4GHz and double that at, i.e., 18dBm or 64mW, at 5GHz.
    The other side of the equation, of course, is the power & gain of the W510 radio & antenna.
    Do we have specs for the W510 power output & antenna gain (e.g., a typical laptop is about 50mW (roughly 15 to 18 dBm)  pushed into an antenna with a gain of about 1/2 dBi to about 1 dBi at best, regardless of what the specification sheet intimates)?

  • Apple tv 2 dont work with thomson tv after update??

    After an update my apple tv don work with my Thomson tv anymore, when i choose the HDMI on my tv, the led light goes out on the Apple tv , and the tv say no signal , i have 2 thomson tv and both are doing the same thing, om my philips tv the apple tv works???!!!
    Patrik

    I assume it's a straight HDMI connection. Have you tried connecting to iTunes (via micro usb) and doing a restore? If that doesn't work it may be hardware related, in which case you should take the unit in.
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

  • How come almost all complete themes dont work with ver. 30.0 can a get a ver. that will work with them?

    looking through the "complete themes" and almost all of them say " not available for firefox 30.0 " i guess that what ver. i have i thought i had the newer version and would think theese theme's would work with it is there somewhere else to look for more complete themes or another ver. i can download that will make it work with these theme's???
    -dave email-" [email protected] "

    As of Firefox 29.0 and newer the Complete Themes that were made for old UI in Firefox 28.0 and earlier really needs to be updated.
    Some examples.
    *https://addons.mozilla.org/en-US/firefox/addon/nasa-night-launch/
    *https://addons.mozilla.org/en-US/firefox/addon/metal-lion-australis-tiger-sp/
    *https://addons.mozilla.org/en-US/firefox/addon/metal-lion-australis-tiger/
    *https://addons.mozilla.org/en-US/firefox/addon/metal-lion-australis-graphite/
    *https://addons.mozilla.org/en-US/firefox/addon/ft-deepdark/
    https://addons.mozilla.org/en-US/firefox/complete-themes/?sort=updated
    and on the Theme page you can scroll down and click on Version Information.

  • Fixed Layout EPUB, Buttons dont work with Adobe Digital Editions

    Hello Community,
    I am working with InDesign CC 2014.1 and Adobe Digital Editions 4 (ADE).
    I am developing a FXL epub. When viewing the exported epub with ADE the buttons don't work.
    I also tried to view other epubs as the one mentioned in this thread: https://forums.adobe.com/thread/1684411
    No animations work.
    can someone help me with this problem?
    Thanks in advance.
    Stephan

    ADE is not a very good FXL EPUB reader. Try iBooks, Readium for Chrome or Kobo.

  • Amconsole dont work with virtual domains

    hi!
    i have a multi-homed environment (virtual domains). if i use the main domain i can access /amconsole without any problem, but if i try with any additional domain i receive an error message "Unkown domain". i've followed all steps for configuring multi-homed and it works with mail, calendar, etc.
    any hints?

    hi!
    i have a multi-homed environment (virtual domains). if i use the main domain i can access /amconsole without any problem, but if i try with any additional domain i receive an error message "Unkown domain". i've followed all steps for configuring multi-homed and it works with mail, calendar, etc.
    any hints?

  • Boot usb dont work to recover dead bios on lenovo t500

    cant recover my dead bios on t500.too bad im in zimbabwe there is no ibm lenovo companies for help.i jus get back to use my dinosaur desktop.

    I'll start by asking if you get the Thinkpad image on the screen when you power on the system?
    USB functions are provided by the BIOS, without a functional BIOS, there is no functional USB.   In the case of BIOS corruption where the machine becomes unusable there is little answer other then finding an Lenovo repair center.  However before I considered it dead I would try resetting the CMOS and see if that helps,  The HMM http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/43y6630_04.pdf will show you how to take the unit apart to gain access to the battery, it is located under the keyboard.  Make sure you have the AC, and battery removed when you do this.  Best of luck, hopefully you don't have a completely dead system.
    Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
    Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

  • External USB keyboard does not work with T60 after BIOS upgrade

    External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
    It does the same with or without the docking station.
    Anyone else bumped into this problem yet? 
    Has someone found any fixes for this?
    t

    Hi and welcome the forum!
    Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
    v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

Maybe you are looking for

  • Icloud only installs on 1 pc user account, how do i install it on the 2nd?

    I downloaded, installed and setup Icloud on my windows 7 pc. Outlook addons, etc, all installed and worked beautifully. I switched over to my wife's user account and tried to install the Icloud control panel. When the installation starts, it gives me

  • Get filename from EBS to BPEL

    Hi to all, I have an ESB process that has a file adaptor, that reads xml files from a certain folder and then routes them to a BPEL process. I want FROM Bpel to get the filename, becauase i need to store that filename in my database. Can anyone pleas

  • N-Key rollover not working on my Mac

    To make a long story short, I'm one of those heretics who chooses to game on a Mac.  The game I play mostly is Starcraft 2.  In Starcraft 2, there's a new technique for injecting hatcheries as zerg that requires two key presses to be registered simul

  • Ipod stopping after 1 min or so

    Help. Never had a problem with an apple product out of the box- my fat mac in 85 through 7 more so this is frustrating. Finally got an ipod gb. Fully charged it, downloaded my songs and it will play one minute or so of any song - shuffle mode or by a

  • LabVIEW 8.2 - Custom Probe mystery behavior

    Hi: I recently updated code built in v7.1 to v8.2.  In one section, I have a simple wire that contains I16 data array.  When I put a probe on the wire, the probe shows the data as it should.  When I select a custom probe via 'custom probe,' 'controls