Lenovo G570 plastic frame opened - Need support

Good morning!
I am encountering a problem with my two-month old G570. Last night the plastic frame in the area very close to left screen hinge, suddenly opened by itself and it doesn't close at all. I bought the notebook from Greece and now I am in Belgium in the wider Brussels area. In addition, the notebook is brand new, two and a half months old and I think that I have a 12-month global warranty coverage. I called the hotline support number (080076524) that I found in the website but it is not available anymore.
My intention is to fix the notebook before the situation gets worse, still yet it works 100% fine but if I ignore the problem I may experience problem with the screen soon.
Thanks in advance!
LENOVO G570-20079
INTEL CORE i3-2310M/4GB ram DDR3-1066MHz/HDD Toshiba 640GB MK6465GSX/VGA AMD Mobile Radeon HD 6370M/Atheros Wireless 9285/Atheros Ethernet Controller 8152/

After searching a lot and calling different numbers, I didn't manage to communicate with Lenovo customer service. I have to say that I feel disappointed about this situation (the website contact data didn't help me at all). Moreover, I will handle the notebook to a big electronics store, which will transfer it to them.I hope that it will be fixed at a fast time because it is very precious for me during this period.
LENOVO G570-20079
INTEL CORE i3-2310M/4GB ram DDR3-1066MHz/HDD Toshiba 640GB MK6465GSX/VGA AMD Mobile Radeon HD 6370M/Atheros Wireless 9285/Atheros Ethernet Controller 8152/

Similar Messages

  • Lenovo G570 Need Help

    Hello friends
    I am installing windows 7 ultimate on my Lenovo g570 but its doest detect the CD ROM so I decided to install using my computer. So I remove the had disk and connect it to my computer and I install successfully but when I connect the HD with Laptop "it boot up to starting windows then it crash with blue screen" and I don't have any backup or anything
    please tell me what to do

    hi samsfs01,
    Welcome to the Lenovo Community.
    If your cd/dvd drive is not working, the alternate way to install Windows 7 is by creating a bootable Windows 7 USB Flash Drive. - check here - http://tinyurl.com/q7m5v2 - for step by step guide A probable reason why you got a bluescreen from the post above is because it's trying to read the machine information where you installed Windows and when you put it on a different PC, the machine information got changed (this normally happens if the two machines are not identical).
    Hope this helps.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo G570 Boot Problem - DVD - Hard Disk Not Recognized

    Dear Techies and Tech support Team,
    All of sudden my Lenovo G 570 - 4334 Laptop gone down.
    These are the problems I could Identify so far.., initially couple of times I have seen a blue screen at the time of Win 7 Booting, but then When I selected Safe mode option, used to boot well and again used to boot Normal mode option.
    Since Couple of days, This **bleep** thing is not booting at all, 1. Thing I see it comes upto selecting of OS - in my case along with Win 7 Ultimate I also have 2003 Server OS, but when I select any one of the OS system is not booting.. saying typical error .. not able to find os.. etc.., and it goes to DOS or.. Intel UNDI - PXE - 2.0 OPTION saying Check Cable connection ! PXE-MOF: Exiting Intel PXE ROM
    No Bootable Device - insert boot disk and press any key ..
    2. When I open Setup - BIOS screen using F2 key, under Information Tab in Setup Utility Under HARD DISK & CD/DVD ROM - [Not Detected] - [Not detected] (This is happenning when I keep SATA Controller Mode as [Compatible] in Configuration Tab - I need to this if I want my Both Windows OS to work, because I installed it using Imaging - Ghost etc Methodology.
    3. But by Default the Option of SATA Controller Mode is [AHCI], having this reset using LOAD Default Setting, System goes back to AHCI mode, and HARD DISK is displayed as WDC WD7500BPVT - 24HXZT3 and DVD ROM: Not detected, but even now Laptop Does not boot.
    What is the ISSUE ?
    LENOVO G570
    BIOS VERSION: 40CN25WW (2.11)
    EC VER: 40CN25WW (2.11)
    Lenovo SN :xxxx...x.x.x.x
    Board num: xxxxxx
    UUIDx.x.x.x.x.x.x.x.x.x..x.x.x.x
    CPU: Intel i5 2430 M
    System mem: 4096 MB
    Please Help Me, do I need to down load any new patch and update BIOS ? or What ?? What should I do ?
    Thanks,
    Sashi

    I have the same problem. Temporary solution: Take out the DVD from its place, then boot the computer

  • Some Keys are not working on Lenovo G570

    Hello all
    I am new here, looking for some help regarding my Lenovo G570.
    Yesterday, it was working perfectly, I properly shut is down. I have set a BIOS pasword.
    Today, when I switch it on, I was unable to type the pasword becasu some keys were not working. However, I managed to loged in with the help of On Screen Keyboard. After analysing it, I came to know that some keys on numpad includeing 0,2 and on the 2nd line(vertical numerical keys) 1,2,3,4,7,8,9,0 are not working. I tried to re-install the OS but I set a BIOS paswoed containing one of the missing keys.
    Please let me know whether it is a software problem or should i take my laptop to some repairing shop?
    Thanks  
    Solved!
    Go to Solution.

    Hi Asadkhan92,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing an issue with the keyboard in your Lenovo G570 laptop.
    As you have mentioned that the some keys are not working in your laptop, as you have also mentioned that the onscreen keyboard is working, please connect the external keyboard and check  for the issue, this is to confirm if the issue with the hardware or software.
    If the external keyboard works fine and if the keypad is not working then it’s a issue with the keypad of the laptop.  
    Please visit the nearest service centre for further details.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Hope this helps! 
    Best regards,
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • New Lenovo G570 Teething Issues

    Dear Lenovo-connected moderators, outriders and the like (Please note that in error I originally posted this to the other thread):
    I just bought in Europe a new Lenovo G570.  I have the following issues:
    Since I always resize the C: partition I have removed the possibility of using one-key restore.  It seems bizarre that Lenovo would force keeping the C: partition at its initial size.  Surely it would be possible to write the one-key software to work around repartitioning the HDD.  I did the resize of the C: partition immediately after purchase as part of my personal data and program installation and found out later about the requirement not to resize.  Moreover, as far as I can recall there was no D: partition already installed, which I might have been able to live with (I prefer multiple data partitions).  Any way to fix this problem?  For I restored the C: partition to its original size but that didn't help; I couldn't get the recovery DVD's made; the one-key button was non-functional.  What do I have to do to get the recovery features back?  For I see that for very similar products a fresh install of Win 7 causes all kinds of problems, and in the absence of recovery DVD's that's really the only other option.  I should point out that at the moment the computer is working; I'm just trying to do my preventative medicine for the day the computer crashes.
    Lenovo's model numbering is very confusing, as is the Lenovo habit of updating system specs on the fly.  My model name is 20079; my model number is CB01031166.  If I download the current specs for the model from the Lenovo site (just did) they don't agree with what I have.  Major differences are that my computer shipped with an Intel i5-2410M processor, a 640 GB HDD and with a separate ATI Graphics Card (Radeon Premium).  Thanks, but this leads to issues about driver updates when I search for downloads for my computer on the Lenovo site.  In particular, it's not clear to me whether I should be reflashing BIOS with the latest BIOS.  On the thread about serious issues with the Idea Pad Z570, I saw recommended the reflashing of the BIOS.  You might ask, well why would I go there?  Because the Lenovo site does not support searching on models that are not branded Think Pad or Idea Pad.  Mine's branded Essentials and it's just not recognized even in the automated search using the Internet Explorer.  So searching for Lenovo G570, that's what a Google search turned up and the specs of the Z570 are extremely similar to the G570 I have.  So if someone could tell me how to find the driver updates for my model, I'd be very grateful.
    I see in the Z570 thread that if the CD is not the first boot priority then the WiFi doesn't work.  Does this also apply to my model?
    When I boot with an external Sata HDD attached (to see if BIOS will recognize it for boot purposes), the boot procedure freezes until I unplug the Sata HDD.  Of course the external HDD is plugged into the USB port.  This seems to be a problem with the BIOS, although admittedly I can't recall if the BIOS flash screen shows and it freezes after, or it freezes before it reaches the BIOS flash screen.
    I also see that the fan that's always running is actually a serious warranty issue.  I hadn't realized that it wasn't some quirk of my software.  So here we are with a serious warranty issue.  Update: 23/2/12.  This does not seem to be a real problem on my machine at the moment.  While the fan works more than I would have expected, it will shut down eventually once the computer is not doing anything.  Possibly the actual software I'm using on the machine is causing heavy fan use.  This is something of a relief.
    According to the specs the computer ships with a USB/eSata port.  And indeed there is a port in the right place that is different from the other USB ports.  The port of course works with USB.  However, its shape is not the usual eSatap shape.  In particular it doesn't have the cutouts left and right for the usual eSatap jack.  Instead it has a cutout at the top.  But for the life of me and my dealer, there is nowhere on the Net where we can find an image of the Lenovo USB/eSata port and certainly nowhere where I can buy a jack/adaptor/external SATA disk that fits the Lenovo USB/eSata port.
    Here's an image of my USB/eSata port.  It's the middle of the three ports.  Of course, on the left is something for TV that is irrelevant, and to the right is a normal USB port.  How do I find anything to work with it at eSata speeds?
    Thanks very much.

    Thanks for replying ExJamJus.
    I will ask the local reseller, but I suspect they don't know more than anyone else.  The problem is that the specs are very fluid on these units--after all, I have a ATI Radeon graphics card whereas the specs typically say that its an integrated (on-the-motherboard) Intel graphics card.  Some places, as other users have noted, they do spec it as having an eSata/USB port, but there's just no plug available with that shape with any specification.  My technician who sold me the computer thought that the only possibility was that the plug would be introduced later.  He'd never seen one and he takes computers apart and fixes them.
    As for the drivers, I installed all the drivers.  Nothing terrible happened except as follows:
    One of the ATI Radeon updates, for Hydravision I believe, comes to an end where kdbsync.exe can't start at boot time because Open.dll is missing.  You can follow up on the Internet.  The fix is to download Open.dll and put it in the proper folder in Program files.  It works now--or at least I don't get an error message at boot time.
    This is import for Lenovo: Lenovo energy management upgrade gave me the option to install on top of the old Lenovo energy management but it would require a reboot.  So I did it.  But what happened was that Lenovo energy management wouldn't start at boot time.  I tried repair, no deal.  So I had to completely uninstall Lenovo energy management and then do a fresh install.  It works now.  This is going to irritate people.  Bad for business.
    It's unclear in some of these cases just what driver is installed on the computer and it's not clear whether the driver installer programs are always coded to check whether the driver being installed is not older than the installed driver.  So it makes it a little chancy to download and install a driver that was issued not long before the manufacture date of the product.

  • Lenovo G570 Windwos xp drivers

    Hi All,
    this is My first post.
    I am Using Lenovo g570 laptop. I have installed Vm ware on this i installed Windows xp SP3 32 bit Operating system.
    i want to install chipset and VGA drivers on my vertual system.
    Whwnever i try to insatll Chipset drivers It gives message: System did not match with minimum requirement.
    need help to resolve this same.

    Hi,
    So we're clear - you want to install these drivers in the virtual machine, not the G570 OS?
    VMWare doesn't reflect the host machine's hardware to the virtual client.  It emulates a specific set of virtual hardware that is the same regardless of the host.  You won't be able to install Lenovo drivers inside the virtual machine, since the virtual harware is not the same as the host's physical hardware.
    Install VMWare tools, if you haven't already.  It should provide the drivers you need.  If not, open device manager in your virtual machine and see what the virtual hardware is.
    Somewhere on the VMWare site there should be a list of emulated hardware.  I'll poke around there and see if I can find it.
    [edit]  Here's a snip of the virtual hardware in my XP client running under VMWare Player 4 on a Win 7 Ult 64 i7 desktop.  Note that this "hardware" is not the same as the host hardware.
    [more edit] Below that is a partial snip of the physical hardware in the host machine.  You can see that they are quite different.
    Z
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Lenovo g570

    Hello I am new to this forum so forgive me if I have posted in the wrong place.
    I have a Lenovo G570 laptop and I accidentally uninstalled my wireless network adaptor last night I have searched the internet for answers and found nothing helpful. I tried switching my laptop off and back on so windows would install it for me. But it just says could not install. Could anyone help me with this problem as I am desperate to get it to work again,

    Hi 11and 11,
    Welcome to the Lenovo forums.  All of your drivers can be found on this link.  The wireless drivers are located under Networking: Wireless LAN.
    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?DocID=HT072724
    Let us know if you need anything else.
    Did you find a post awesome? A great response? Kudo them!
    Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a 'thank you' for helping you out!

  • Lenovo G570 Screws out CD ROM failed

    Hi There,
    I am Joseph
    I bought Lenovo G570 Laptop on 18/10/2011, your product was good till warranty period ends, but later I noticed that its CD-ROM is not working - its gets ejected while trying to play it & monitor screen screw has come out from one side which is shaky and the monitor has become very loose. And also the product purchase updated on your system is incorrect, I really regret buying this product which doesn't have the Basic Quality.
    I am waiting for a REPLY from the Lenovo’s Senior management, If you cannot give a solution to my compliant, I really do a CAMPAIGN AGAINST YOUR PRODUCT AMONG MY FRIENDS, AND I WILL SHARE THIS COMPLAINT ON FACEBOOK AS WELL.
    Waiting for your reply...
    personal informations removed.

    Sure sounds like a G5. Maybe you could find it by looking through this site:
    http://www.everymac.com/
    The mac starts up? Go to the upper left corner and select "about this mac". All the info you need should be right there. Want more info?, click on "more info".
    Here's a page where you can find many do-it-yourself options:
    http://support.apple.com/kb/HT2580

  • Problem with lenovo G570 - graphic card

    Hello,i own lenovo G570 and i keep getting this message: Display driver stopped responding and has recovered, every time I start launching any game. So basically I  cant play any game right now. I have hd 6370m and i downloaded drivers from official lenovo sites, so whats the problem, please?I really hope someone can help me solve this.

    Hi @Lefteris93 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your I would uninstall all the software and drivers for AMD High-Definition (HD) Graphics Driver and Catalyst Control from the control panel and the Device manager.  Restart the notebook and download from here.
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase. This will help update the drivers that have been installed on the Notebook.   If you graphics card was damaged or not functioning you would have a black or blank screen.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Lenovo G570 - Atheros Lan Driver for Linux required

    Dear All
    I have bought lenovo G570 laptop and i installed Enterprise Linux (Oracle Linux 5.8) , i need Atheros Ethernet Driver for Linux please help and support.
    Regards
    Habib

    Dear All
    I have bought lenovo G570 laptop and i installed Enterprise Linux (Oracle Linux 5.8) , i need Atheros Ethernet Driver for Linux please help and support.
    Regards
    Habib

  • Lenovo G570 battery not charging. Battery stuck at 90% but has no charge at all.

    Hi,
    My Lenovo G570 battery is stuck at 90%. It says plugged in, not charging. It just happened over night. Next day battery refuse to work.
    In windows it says battery 90% and is not charging but battery has no charge at all. When I disconnet the A/C power laptop just shutdown immediately. As soon as I unplug the power laptop just shutdown as there is no charge in the battery.
    I did reinstalled the Power managment and also updated it. I all unpluged reboot in OS, restart, put battery back and boot into the OS back. Nothing seems to work. Is there any suggestions?
    UPDATE: I just installed Lenovo Enery Managment in windows 8 before I was trying in windows 7. In the battery tab there are two options
    Maximun battery Life
    Optimized battery Health
    It is selected to "Optimized battery Health" and won't change regardless of power plan. I click on  "Maximun battery Life" and when I open the app again it reset it to "Optimized battery Health".
    UPDATE # 2: Lenovo Solution Center say that battery life is GOOD. "Your battery is in good condition".
    Solved!
    Go to Solution.

    LSC (lenovo solution center) does "NOT" support the G570  further information at http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-73784
    Lets make 2015 the year of the #DO
    Did I or someone help you today? Press the star on the left to thank them with a Kudo!

  • Problems with Lenovo G570 dvd drive

    I've got a Lenovo G570 using Windows 7.  I've recently lost the ability to use my DVD drive.  It appears in the Computer file but won't load anything.  I've already checked and the software is supposedly up to date.  I've even taken it out and re-seated it but nothing works.  Any advice?

    Hi IMFrellingWonko,
    Welcome to Lenovo Community Forums!
       The Upper and lower filter does not fit he Symptom here but I suggest you give it a shot
                http://support.microsoft.com/kb/314060
    check My Computer screen when you put in a CD, sometimes autoplay won't work but you have to double click the CD icon to open the content.
    If you already tried other known good disc format (DVD, regular CD, Mp3,data,bootable CDs) and still won't recognize any of them
     It's possible that the Drive itself is having issue,
       If you have other laptops that fits with the Drive size you can swap the Cd drive and check if it will work with other laptops. You can call Technical Support if the Laptop is still in Warranty.
    Best Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • "Failed to open midi support library". What is missing? And if so, how do I get it back? What to do?

    I own a new Macbook pro 15" quadcore with OS X Mountain Lion 10.8.4
    When trying to start software Reason 7 I only get the message "Failed to open midi support library".
    What is missing? And if so, how do I get it back? Reinstalling Mountain Lion did not solve anything.
    What may I do? Is there separate MIDI-drivers or else that Macbook needs to be running audio at all?
    My audiocard Apogee Duet 2 is´nt working well either and I cannot even open the MIDI-window in Mac,
    so that road is blocked. I´ve seen more ppl having problem but found no explaination.
    Some say to remove midi-drivers but that folder is empty (or hidden?) when opening.
    Also, Garage Band cannot open. It´s no problem with graphic apps, only with audio/midi.
    My 2011 Macbook pro13" with OS X Lion runs like a charm. So how can this be? It really puzzles my mind.
    Have thoughts on having OS X Lion on the new Mac as well but will not do it until I know where the real problem is.
    Hope there is an easy fix to it. Thanks in advance.

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

  • Web Camera doesn't work on my Lenovo G570 laptop, Please Help?

    Well I recently bought a lenovo G570 laptop. The webcam worked fine for the first month. I don't really know when the camera stopped working but it seems that every software that uses a camera can detect the camera but when the video window pops up it is just plain white. I know the reason isn't because of the hot key FN+ESC because it works fine, I can disable and enable the camera. I read many threads with the same problem. I uninstalled and re-installed the drivers and easy capture but it does not solve my problem. Can someone please help?

    As I  understand the camera is not working.
    If the camera is getting activate by Fn+Esc key then it could be driver issue.
    You need to uninstall the camera software and other relates software.
    Update the BIOS and then install the camera drier
    Download the BIOS update for Windows 7 32bit from the mentioned below web link.
    http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_show_4480.html
    Download the BIOS update for Windows 7 32bit from the mentioned below web link.
    http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_show_4481.html
    After updating the BIOS install the camera driver.
    http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_show_4138.html
    Best Regards,
    Tanuj
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Frames open in a new window

    Hello there!
    I am trying to do a homepage in dreamweaver. It is working
    well just in Safari. Frames open in a new window on other browsers
    and it is not what I want. I haven't linked anything to _blank. Can
    anybody help me?
    Dental V6

    What? Each page is complete in itself. That's the thing you
    are missing.
    In that case, you do not need both page1 and page2 open at
    the same time.
    I assume you are imagining page1 as something like masthead
    and navigation,
    and page2 as content. But that's not the best way to do it.
    Page1 and
    page2 would both contain masthead and navigation and content.
    They would be
    independent pages that are both complete.
    The way to do this would be to use -
    1. DW templates to provide easy-to-maintain 'boilerplate'
    elements on all
    pages, or
    2. Server-side includes to allow the use of separate
    'component' page
    fragments which are automatically included into each page by
    the server.
    You just do not want to use frames.
    The decision to use or not use frames should be based on a)
    your site's
    needs, and b) your willingness to accept the potential
    problems that frames
    can create for you as developer and maintainer of the site
    and for your
    visitors as casual users of the site.
    I am down on frames because I believe that they create many
    more problems
    than they solve.
    Judging from the posts here, and the kinds of problems that
    are described,
    the kind of person most likely to elect to use frames is also
    the kind of
    person most likely ill-prepared fo solve the ensuing problems
    when they
    arise. If you feel a) that you understand the problems and b)
    that you are
    prepared to handle them when they occur, and c) that you have
    a need to use
    frames, then by all means use them.
    As far as I know, the most comprehensive discussions of
    frames and their
    potential problems can be found on these two links -
    http://apptools.com/rants/framesevil.php
    http://www.tjkdesign.com/articles/frames/
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Dentalv6" <[email protected]> wrote in
    message
    news:[email protected]...
    > But I want page2 opens beside page1. In this case I need
    frames, right?
    >

Maybe you are looking for