Lenovo G580 boot menu is not working when pressing F2 and F12 key

QuestionI bought a new Lenovo G580 series laptop. After installation of Windows 7 Ultimate x64 bit edition, a problem revealed when Lenovo driver get installed.
When I installed Intel HD 3000 graphics driver and restarted laptop, the Window was unable to start normally. It displayed an error, so a recovery program started which was recommended. But this program failed to resolve the problem. Later, I tried again to load Windows normally but the blue screen fatal error showed up.
I attempted to reinstall Windows again, but after restarting window, the boot menu was not showing up after pressing F12 key. F2 key was also not working either.
I spoke to a Lenovo techincal assistance expert and they suggested me to remove battery and charger and press start key for 30 seconds.
My problem still remains the same, and I am unable to access boot menu.
The bios version is 62cn34ww. ls there a way I can get this running again?
AnswerPlease take note that the suggestion below is just a troubleshooting guide. If the steps could not fix the issue, you need to send you machine in for service for further assistance.
Try removing the hard disk , then press F2 button to enter BIOS
If you are successful in entering the bios, pleaes load set up defaults
Save setting by pressing F10 and shut the machine down
Connect the hard drive back and check if can enter BIOS via F2 and F12 to see boot menu

"OK, I will retain my sanity.... changed & of course forgot windows 7 password on my Lenovo H430 desktop. (about a month ago) came accross my windows disc & was going to see if I could boot from it (wouldn't from the pasword unlocker i downloaded) Anyhow, i evidently have a password to enter bois setup which i attempted to "guess" baaad idea. i am now looking at Fatal Error.....System halted on my Lenovo H430 desktop. how do i proceed without doing any damage??? HELP...

Similar Messages

I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.

Photoshop CC. Colour selection not working when using alt and brush.

Hi, Photoshop CC. Windows 8.1 64 bit. Colour selection not working when using alt and brush. I have tried rebooting and other things like closing swatch panel etc.
The alt key is otherwise OK. It's not the recent upgrade from Win 8 to 8.1 (5 days ago) because the colour selection facility was working yesterday. Any ideas.

I'd say things sound desperate enough to try resetting Preferences
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop
If that fails, we need to know your operating system?
Do you have a full CC subscription, or by apps do you mean Photoshop, Bridge and Lightroom?
Another other information that might pertain ?

Layered menu buttons not working when built.

I have a project that has one menu and one track. The menu has 7 buttons linked to 7 different markers in the track. When I run the simulation in DVD SP, the buttons link fine, and play as they should...but when I build the project and run it in DVD player or burn it to a disk, the buttons do not work.
If I create a non-layered menu, the buttons will work when built...
I feel like i'm just missing one little setting on the layered menu
Thanks
Mac OS X (10.4.8)

Don't forget that a layered menu will normally need two presses to get anything to happen, one to select the button and the second to activate it.
That said, are you sure that you have got the psd file set up correctly? I would recommend using a background layer with everything on it that you want to appear when not selected, then only adding layers with the changes necessary to show the button selection/activation.

G3 blue+white --- boot-menu does not work !?!

hi.. I can´t access the boot-menu or boot from cd/dvd using the shortcuts ("c","alt",..)
the mac always tries to boot from harddisk.. can anyone help?
perhaps I need to install an firmware update?
thanks ^^
..sorry for bad english

thanks... but I thought the newest g3 firmware is this one:
http://docs.info.apple.com/article.html?artnum=58374
..what is the other firmware for? for updating cd/dvd-rom?
yes.. it´s a simple dvd.. but I can´t boot from
(both harddisks are empty)
..I only have MacOS 8.5 to boot from CD (without installing).. but I can´t change the cd/dvd to open the MacOS Tiger dvd.. cause 8.5 needs the cd inserted to work..
and this (the 8.5 without installing) is the only cd that boots automatically at startup..
I know the MacOS Tiger & Tiger Server dvd are still ok, no scratches (I used them last time to install; I set the startvolume to dvd using the pre-installed tiger - I bought it 2nd hand).. but I can´t boot it

HT1619 menu does not appear when pressing the menu bottom from the apple remote

I got a apple remote but the menu does not appear on the computer when pressing the menu bottom!?

Prior to Lion, it used to invoke the menu of the FrontRow application. FrontRow is no longer available with Lion. The menu button will work with apple TV.
Regards,
Captfred

Menu is not working well on tablet and phone

Hi,
I started with a BC template for www.extraleisure.nl 2 months ago.
The menu isn't working well. when you go to "advies" there are submenus but they disappear verry fast so you don't have time to put the buttom.
How can I fix this?
Than I also need to make the site good for mobile (tablet and phone)
I’m not that technic that I follow all about Menu Module V2
I didn’t rename the divs
I didn't make changes in Modules templates > Menu
I didn’t change the class or scripts below.
<div id="navigation" class="sf-menu sf-navbar">
<script src="/CatalystScripts/Java_DynMenusSelectedCSS.js" type="text/javascript">
<div id="cat_14623_divs">
<ul id="nav_14623">
</div>
<script type="text/javascript">
<div id="navigation-base"></div>
</div>
I went to Site settings > Mobile support > Mobile templates for Responsive site.
Than I went to site manager > Menus > copied the main menu and gave it the name Mobile menu
Than i went to site manager > Page Templates and started with the first template http://www.extraleisure.nl/Admin/Templates_Details.aspx?TemplateID=114942 to ad the mobile menu in the Phone Content.
I removed the main menu {module_menu,14623} and put the new menu with site modules > Menu > select menu > Mobile Menu
<div id="navigation" class="sf-menu sf-navbar">{module_menu,1492705}
<div id="navigation-base"></div>
</div>
So now theres only 1 template with the Mobile Menu.
But when I go to the page http://www.extraleisure.nl/Admin/WebPages_Detail.aspx?PageID=824455 on my mobile I don’t see the vertical menu.
When I created before a responsive website with Dw I saw css for main, tablet and mobile ?
I don’t now where BC puts the css of this new menu?
So I told the vertical Mobile Menu to use my own css
Do I have to create a new stylesheet for mobile?
Can you please help me.
Thanks a lot!
Regards,
Carla

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences''' in the address bar and press enter.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences''' in the address bar and press enter
Select '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Volume not working when I plug and take out headphones

When I plug in my headphones, my keyboard button and the slider button in the menu bar stop working.
I can hear the water droplet sound when I hit the keyboard button, but it doesn't change the volume. With the menu slider, it moves, but doesn't change volume.
I have to go to system preverences and change the volume from there.
When I unplug the headphones, it says
Name
Type
Internal Speakers
Headphone Port
Where I think it should say, as it does before
Name
Type
Internal Speakers
Built-in Port
and none of the controls changes the volume, it just moves.
What can I do to get the volume working again?
I tried a PRAM reset and that did no help.
Do I need to update to Mountain Lion? or is there a cheaper/easier way to do this. Thanks!

1. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
2. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Plug in the headphone
    Under Mute any of the boxes checked? If so uncheck it.

Dell laptop headphone jack does not work when playing audio and video in Firefox 27

My problem is similar to the one posted in this thread: https://support.mozilla.org/en-US/questions/986978?esab=a&s=laptop+headphones+don%27t+work+with+firefox&r=2&fpa=1&as=s
I believe it has little to nothing to do with extensions.
I have just installed Firefox 27 on the Dell Inspiron 3520 laptop of a friend. She is an unsophisticated user who has a computer for email, simple web browsing, and watching YouTube and other online videos. Because she frequently seems to end up with junk on her machine, I wanted to switch her over to Firefox so I could install ad and script blockers that would hopefully slow down the frequency of adware and malware roosting in her system.
The laptop is a Dell Inspiron 3520 with an Intel celeron CPU (64-bit), running Windows 8. There are standard end-user applications installed (Adobe Reader, VLC Media Player, etc.), but no tweaking utilities, etc. The audio drivers are Cirrus Logic High Definition Audio.
I've been troubleshooting the laptop today trying to track down why the integrated speakers continue to work when the headphones are plugged in, with no sound coming through the headphones. Because I had run a series of virus / malware / adware scans just before installing Firefox, I thought I had mistakenly deleted some system audio files.
It finally became clear after toggling multiple settings, playing with Windows and Dell sound settings, and experimenting, that the headphone audio jack still works as it should in the system itself (for example, playing videos through VLC Media Player) and in Internet Explorer. It is only in Firefox that plugging in the headphones does not send audio through the headphones nor cut out the integrated speakers.
Sometimes there is a silencing of the integrated speakers for a few seconds, but then the audio kicks in again. (I am using YouTube and a certain movie streaming website to test the audio).
However, if the headphones are plugged in before starting the videos, the sound comes through the headphones, but unplugging the headphones, then reinserting them, stimulates problem again. Not only that, but then in YouTube the video will stall and can't be restarted until the page is reloaded.
Again, this is a fresh Firefox install of less than 24 hours, with only Adblock, Adblock Plus Pop-up Addition, Flashblock, and NoScript installed. There are no themes installed and most of the Options are the defaults that are set upon installation.
I have both disabled the add-ons and uninstalled them entirely before testing the headphone funtionality. In both instances the problem persisted. I've also uninstalled and let Windows re-install the Cirrus audio drivers.
Does anyone else have any insight into this problem, and any potential solutions other than "start in Safe Mode" and "reset Firefox"?

Firefox can switch audio devices within ~ a + or - 10 minute period or so (Just a guess). At which point it latches onto the audio device and will never change until the entire process is shutdown (read last paragraph, there is an exception)
Ive had this problem for a few months now, at least. And I switch back and forth from my sound system and my wireless USB headset.
If anything will fix this i believe it would be disabling "Allow applications to take exclusive control of this device" in the properties of your default audio device, but i doubt it. I think this is an issue regarding the code in firefox itself.
I'd like to see this turned into a default feature, being able to disable and enable the ability to stay on whichever device was the default at the time of launch, or to always play on the current default device, even if its changed. That or being able to choose a specific device/devices (WOULD LOVE TO THIS).
Other than that I dont really have a solution, and I kind of doubt anyone will unless its addressed in the next update.
Oh I thought of one solution that doesnt require restarting firefox, disable the current audio device and the sound will automatically switch to the next available device. Or possibly when a new device is introduced?? I havent done much testing on the matter though. This is just my best guess based on my personal experience with firefox.

Why does my ipad not work when powered up and screen just lights up dark blue?

IPad Model A1219 does not respond when powered up, screen barely lights up just a dark blue screen thats it. will not do anything else, why?

I think the subVI is working just fine when called from the main. I think what you're expecting is an indicator on the main VI to update as the subVI runs. What you will see on the main front panel is just the last value that a subVI has. That is the intended behavior of subVIs and function calls in all other languages. If you want to to update a front panel indicator while a subVI runs, pass a reference to the indicator into the subVI and update that reference instead of the indicator on the subVI. The other way is via a global variable. I've attached a modified version of your porgram.
Attachments:
Pass_a_Reference.vi ‏11 KB
GL_Flicker_mod.vi ‏66 KB

HT201406 The bottom line appears not work when tried maps and calculator is there any fix for this

My iPhone bottom line on touch screen is very irisponsive( works some times) is there anything I can do about this

Could you try disabling graphics hardware acceleration? (I'm having trouble determining from your "More system information" whether it's enabled or disabled.) Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You usually need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
If you restart Firefox, is the issue resolved?

Master data check not working when loading into and ODS object

Hi guys,
we are loading transactional data into an ODS from a flat file.
In the infopackage, we have checked the option :
"Do not update data if no master data exists for a characteristic".
This option seems to be unreliable :
For some characteristics (it seems those loaded using transfer rules (routines)), incorrect data is still loaded into the ODS even if no entry exist in the associated infoobject master data table.
Any help appreciated.
Many thanks !
Pierre-Yves

Hi Dear,
please delete all the incorrect master data from the master data characteristic first and then try to uploading the data again .It should work, because there migth be some master data created when data were loaded with out the check before.
And please check whether all your characteristic info object are of master data , I mean that in the infoobject defination you have checked the master data check box on the info object. If you have only text then it might fail the master data check.
hope this help.
cheers,
balaji
Message was edited by: Balaji NS

Audio jack not working when cover closed and hdmi connected

Pavillion Sleekbook 14 (14-b017cl)
Windows 8
I have an external monitor connected via the hdmi port. My external monitor does not have built in speakers. I connect an external speaker via the headphone jack. I can play audio fine if the notebook cover is open. As soon as I close the notebook cover, the audio stops. How can I get the audio to still be sent to my external speakers with the cover closed?
I have my power settings set to "Do Nothing" when lid is closed. I don't know what else to try?
Thanks for your help.

What is the status of the TV when the lid is closed? Does the image remain as it should?
Try installing this audio driver as it was released after the launch of Windows 8.
What program is playing the audio? For example, a music player or movie program? Is there no audio in any program when this happens?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How do I move aiff files from the viewer to the timeline-it is not working when I try to drag and click or clicking on overwrite or insert in Final Cut Pro 7. Thanks

How do I move aiff files from the viewer to the timeline-it is not working when I click and drag or when I try to move the files to the overwrite or insert buttons-Thanks.

hi
You cannot move audio from the viewer
Mark your in and out points then in the browser grab hold of the audio tracks icon and drag that to the time line
PJ

Hyperlink is not working when running on sun solaris OS

Hi,
I have Created PDF file using oracle reports 2.5 version and included hyperlinks in reports which will open files located on our intranet server(http://cup2.ngc.co.uk). Hyperlinks are working properly when I generated report on window xp machine but not working when I compiled and executed report on solaris unix server(reports 6i).
please let me know why hyperlinks is not working when executed on solaris((5.8). do we need any setup to work hyperlinks on unix server.
Thanks in advance,

Ok, there are 2 docs i've tried.
A = Doc created originally from MPB Pages with hyperlink
B = Doc created from iPad Pages with hyperlink
A was transfered to iPad Pages using iTune. I emailed A as pdf from iPad to gmail and reopen the file on iPad using Quickoffice / PDF Reader Lite, the link is NOT active, not working. BUT, when i read A using MBP gmail, the link is ACTIVE, i click on the link and it brings me to the correct webpage.
As for B, after the page was created with links on iPad, i emailed B as pdf from iPad to gmail, reopen the file on iPad using Quickoffice / PDF Reader Lite, the link is NOT active, and this time, when i read B using MBP gmail, the link is NOT active as well.
Weird huh? I'm starting to sense that is the problem with iPad Pages. What say you?

Lenovo G580 boot menu is not working when pressing F2 and F12 key

Similar Messages

Maybe you are looking for