Lenovo Idea tab A 3000 Deleting selected conversati​ons Issue

Hello, I just bought A 3000 Idea tab and in the messaging I do not see an option to delete selected threads at once by selecting. We can only delete selected conversations in one thread / delete all threads. Can anyone tell me whether this option exists in A3000?
Solved!
Go to Solution.

I don't think the stock Android Messaging app supports that (although I can't say that I've ever tried it personally).  There's lots of alternative messaging apps available on the Play Store, I'm sure you can find one there that better meets your needs.

Similar Messages

  • PLEASE NEED HELP TO FLASH NEW FIRMWARE ON LENOVO IDEA TAB A1107

    Please can anyone help me install new Android OS on my Lenovo tab A1107. Current os is Android 4.0.4. Also i have 2GB internal storage and 12.01gb USB storage and 8GB SD card inside,Please tell me the version of OS to instal and how to install it.

    Please divice power on and off want to flash new rom please help.
    mcl630 wrote:
    Go to Settings->About tablet->System updates.  If there's an update available, it will be there.

  • Lenovo Idea Tab A 3300 H charging time

    Hello! I have a Lenovo A 3300H tablet and after I did the update to version A3300H_A442_01_16_1409930_ROW,  battery charges in 8 hours. Before the update battery charge time was about 3 hours. Is anyone experienced this problem? I expect an answer or a possible update to remedy the situation that is unacceptable!

  • How to delete selective data in a cube

    Hi all,
    Can any one tell me, how to delete selective data in a cube. For example if i want to delete data corresponding particular Matrial Id  or particular Customer ID (say C400) ? And even deleting the data based on particular Request numer.?
    Sandy.

    Hi,
    RSMO > Infocube > Manage > contents tab > selective deletion
    Then define your selections for deletions (Matrial Id or particular Customer ID (say C400)).
    Request based deletions can be done directly from Request tab.
    Thanks,
    JituK

  • Deleting selected songs/picutes off i-Pod NANO (4gb).

    I am wondering if there is any possible way to delete songs off your i-Pod
    without deleting it all or reseting my i-Pod. As i only want to delete selected songs & pictures.
    Thank-you.

    *only want to delete selected songs......*
    Set the iPod to manual management, the content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes, you can drag and drop whatever you want to the iPod from your library and you can delete from the iPod without deleting from iTunes: Managing content manually on iPod and iPhone
    Alternatively sync the iPod from a selected playlist. When your iPod is is set to sync selected playlists it automatically picks up any changes you made to that playlist in iTunes since you last connected. Anything you added to the playlist will be added to the iPod, anything you deleted from it will be deleted from the iPod. In other words the iTunes playlist and the iPod are kept "in sync".
    Open iTunes and create a playlist to update your iPod from, call it -My iPod for example (the dash will position it at the top of the playlists in Sources). Drag whatever content you want to have into the playlist. Now connect your iPod and when it appears in the Source list click on the iPod icon to bring up the preference tabs in the main pane. Go to the Music tab and choose Sync Music and the Selected playlists, artists and genres radio button. Choose the playlist you just made from the selection and click Apply. You can also sync from any existing playlists by choosing the same setting, you just need to make sure that the size of the playlists don't exceed the capacity of your iPod: Syncing Music to iPod
    *.....& pictures.*
    Remove the photo from the folder that you linked to when you set the preference "synchronize photos from" and update the iPod. For example, if the iPod is getting the pictures from the folder "My Pictures," remove or delete them from My Pictures and sync your iPod.
    Here's a simple "How To" on downloading and managing photos from a folder on your hard disk to an iPod:
    1 Create a folder on your hard drive to hold the photos you want on your iPod. Call it iPod Photos for example
    2 Drag the photos you want from your usual picture folder into the folder you just created
    2 Open iTunes, select your iPod in the iTunes Source list.
    3 Click the Photos tab and select “Synch photos from.”
    4 Choose “Choose Folder” from the pop-up menu and select the iPod photos folder you created.
    5 When you want to change what photos are on the iPod just add or remove the photos from the folder you have made and syncronise the the iPod

  • Idea Tab S5000 touch problem

    Hello all.  I'm new to Lenovo community forum.  I have an Idea Tab S5000,which I purchased from Amazon on April third this year  Tthe touchscreen suddenly became unresponsive.  I tried the factory reset and it worked untill the next time tried to log into tablet, then back to not working.   Now my tablet sits on the lock screen and wont recognize any touch on the screen Any help would be greatly appreciated.  
    P.S. When I did the factory reset, the lines of text were all in chinese, so I'm not sure what I did to get it to let me login once.
    Solved!
    Go to Solution.

    hi Painterh52,
    Welcome to the Lenovo Forums.
    From your observation, I suspect a faulty Touch Panel.
    Can you try the following:
    1. Press and hold the power button for 10-15secs until the tablet turns off.
    2. Turn ON the table and press both the Vol+ and the Vol- keys while the tablet is booting. You will then see a recovery menu similar to one of the images below. Try and run the recovery one more time and observe.
    - Link to picture
    - Link to picture
    In addition, pressing Vol+ while the tablet is booting up will go to a device diagnostic menu where you can tests the device hardware.
    If the keys above doesn't work or if recovery still doesn't fix the touchscreen problem then I recommend you contact lenovo and report the issue.
    - Support phone list
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Idea Tab A2107 user guide

    where can i find user guide for Idea Tab A2107 ?
    thanks
    C.

    Hello and welcome,
    SUPPORT (above) -> Quick Path "A2107" -> Guides and Manuals:
    IdeaTab A2107A User Guide V1.0 (WW)
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • How to do delete selection by week in Stock InfoCube (0RT_C36)

    Hi guys,
        I need to do a delete selection by week in Stock InfoCube (0RT_C36) but no time dimension is displayed to be deleted in the Deletion Selection criteria tab. Does Anybody know why this dimension is not displayed to do a delete selection by week? Is necessary do any set up in the system in order to do this deletion?
    Thanks in advanced for your help!
    Regards,
    Csar

    BLOCK LEVEL TRIGGER WHEN-MOUSE-CLICK:
    declare
    rec_num NUMBER:=:SYSTEM.TRIGGER_RECORD; -- record number where clicked
    begin
    if not user_selection.tProductIds.exists(rec_num) then -- not selected
    /* save record number */
    user_selection.tProductIds(rec_num):=rec_num;
    /* select item, if multiple item in record call set_item_instance_property as many as needed*/
    set_item_instance_property('FORTH_PAGE_BLOCK.DESCRIPTION',rec_num, VISUAL_ATTRIBUTE,'SELECTED_RECORD_VA');
    else
    user_selection.tProductIds.delete(rec_num); -- already selected, deselect item
    /* deselect item, if multiple item in record call set_item_instance_property as many as needed */
    set_item_instance_property('FORTH_PAGE_BLOCK.DESCRIPTION',rec_num, VISUAL_ATTRIBUTE,'NOT_SELECTED_RECORD_VA');      
    end if;
    end;
    where:
    PACKAGE user_selection IS
    type tSelectedItems is table of NUMBER
    index by binary_integer;
    END;
    when delete:
    declare
    i BINARY_INTEGER;
    begin
    if user_selection.tProductIds.COUNT=0 then return; end if;     
    i:=user_selection.tProductIds.FIRST;     
    loop
    go_record(user_selection.tProductIds(i));
    delete_record;
         exit when i=user_selection.tProductIds.LAST;
         i:=user_selection.tProductIds.NEXT(i);
    end loop;
    end;

  • S6000 Idea Tab is not charging

    My idea tab S6000 will not continuously charge. It will suddenly stop charging. I have to position cord in order for charging to continue.  At best, i can get it to charge up to 38%. I suspect i need to have port replaced. Any suggestions are appreciated.

    Hi sdhb,
    Welcome to Lenovo Community Forums!
    Try using a Different Cable,
    Inspect the port for any damages,
    You may contact Lenovo Technical team for Hardware assistance,
    Regards
    Solid Cruver
     

  • My iphone's memory is near capacity from photo albums sync'ed with my mac and I haven't found out how to delete select albums without wiping the iphone.  Any suggestions??

    my iphone's memory is near capacity from photo albums sync'ed with my mac and I haven't found out how to delete select albums to free up memory without wiping the iphone.  Any suggestions??

    You do the opposite of how you got them on your phone, you unsync the pics using iTunes.

  • How to delete selected row in table control

    Hi all,
    here is my coding for deleting selected row.
    But it is not working correctly.
    I am not able to delete seleced row.
    If i press delete button it automatically delete from beginning instead of selected rows.
    Can anyone can help me plz...
    CONTROLS rowdeleting TYPE TABLEVIEW USING SCREEN 100.
    TABLES zdetails.
    data : begin of itab occurs 0,
    NAME TYPE ZDETAILS-NAME,
    ADDRES TYPE ZDETAILS-ADDRES,
    CONTACTNO TYPE ZDETAILS-CONTACTNO,
    INIT TYPE C,
    end of itab .
    DATA OK_CODE LIKE SY-UCOMM.
    CALL SCREEN 100.
    MODULE STATUS_0100 OUTPUT.
    SET PF-STATUS 'BACK'.
    IF ITAB-INIT IS INITIAL.
    SELECT NAME ADDRES CONTACTNO FROM ZDETAILS
    INTO CORRESPONDING FIELDS OF TABLE ITAB.
    DESCRIBE TABLE ITAB LINES rowdeleting-LINES.
    ITAB-INIT = 'X'.
    ENDIF.
    ENDMODULE. " STATUS_0100 OUTPUT
    MODULE CHANGE_SDYN_CONN OUTPUT.
    READ TABLE itab INTO ZDETAILS INDEX rowdeleting-current_line.
    ENDMODULE. " CHANGE_SDYN_CONN OUTPUT
    MODULE READ_TABLE_CONTROL INPUT.
    IF ITAB-INIT = 'X' AND OK_CODE = 'DELETE'.
    DELETE ITAB index rowdeleting-current_line ."FROM ZDETAILS.
    DESCRIBE TABLE ITAB LINES rowdeleting-LINES.
    ENDIF.
    ENDMODULE. " READ_TABLE_CONTROL INPUT
    MODULE USER_COMMAND_0100 INPUT.
    CASE OK_CODE.
    WHEN 'BACK'.
    LEAVE PROGRAM.
    WHEN 'DELETE'.
    IF ITAB-INIT = 'X' AND OK_code = 'DELETE'.
    DELETE ITAB index rowdeleting-current_line .
    ENDIF.
    ENDCASE.
    ENDMODULE.
    regards ,
    ranjith.

    Hi,
    Check the following code:
    CONTROLS TABLE_CONTROL TYPE TABLEVIEW USING SCREEN 100.
    TABLES SDYN_SDW4.
    DATA SDYN_ITAB LIKE STANDARD TABLE OF SDYN_SDW4.
    DATA INIT.
    DATA OK_CODE LIKE SY-UCOMM.
    DATA SAVE_OK LIKE SY-UCOMM.
    DATA MARK.
    DATA  COL TYPE CXTAB_COLUMN.
    CALL SCREEN 100.
    *&      Module  STATUS_0100  OUTPUT
          text
    MODULE STATUS_0100 OUTPUT.
      SET PF-STATUS 'GRUND'.
      SET TITLEBAR '100'.
      IF INIT IS INITIAL.
    Datenbeschaffung
       SELECT CARRID CONNID CITYFROM AIRPFROM CITYTO AIRPTO DEPTIME ARRTIME
                DISTANCE DISTID
                FROM SPFLI
                INTO CORRESPONDING FIELDS OF TABLE SDYN_ITAB.
        DESCRIBE TABLE SDYN_ITAB LINES TABLE_CONTROL-LINES.
        INIT = 'X'.
      ENDIF.
    ENDMODULE.                             " STATUS_0100  OUTPUT
    *&      Module  FILL_TABLE_CONTROL  OUTPUT
          text
    MODULE CHANGE_SDYN_CONN OUTPUT.
    you can change the content of current table control line via
    sdyn_conn
    READ TABLE sdyn_itab INTO sdyn_conn INDEX table_control-current_line.
    ENDMODULE.                             " FILL_TABLE_CONTROL  OUTPUT
    *&      Module  READ_TABLE_CONTROL  INPUT
          text
    MODULE READ_TABLE_CONTROL INPUT.
    Check input values
      IF MARK = 'X' AND SAVE_OK = 'DELETE'.
        DELETE TABLE SDYN_ITAB FROM sdyn_sdw4.
        DESCRIBE TABLE SDYN_ITAB LINES TABLE_CONTROL-LINES.
      ENDIF.
    ENDMODULE.                             " READ_TABLE_CONTROL  INPUT
    *&      Module  USER_COMMAND_0100  INPUT
          text
    MODULE USER_COMMAND_0100 INPUT.
      SAVE_OK = OK_CODE.
      CLEAR OK_CODE.
      CASE SAVE_OK.
        WHEN 'SORT'.
          DATA: FLDNAME(100),HELP(100).
          READ TABLE TABLE_CONTROL-COLS INTO COL WITH KEY SELECTED = 'X'.
          SPLIT COL-SCREEN-NAME AT '-' INTO HELP FLDNAME.
          SORT SDYN_ITAB BY (FLDNAME).
      ENDCASE.
    ENDMODULE.                             " USER_COMMAND_0100  INPUT
    *&      Module  EXIT  INPUT
          text
    MODULE EXIT INPUT.
    LEAVE PROGRAM.
    ENDMODULE.                 " EXIT  INPUT
    Regards,
    Bhaskar

  • Lenovo Yoga Tab 2 SDXC UHS-1 Performanc​e

    Hello everyone.
    Recently I purchased a Lenovo Yoga Tab 2 10" Windows. (Yoga Tablet 2-1051F). I also purchased a new SD card with it (Kingston 64GB microSDXC UHS-1 Class 1 +).
    My question is: Does this laptop officially support microSDXC UHS-1 cards?
    If it is supported, the performance of these cards is bad at the moment. Will there be an updated driver or third party driver that might fix the performance problem?
    Benchmark: Average read on the tablet: 10.7MB/s. Average read on another old laptop: 37.2MB/s.
    Some extra information:
    Hardware shows up as a: Generic SD64G SD Card
    Hardware basically says it's a standard SD card, while on two other devices, it said that it was an SDXC card.
    Hope anyone knows the answer to my problem.
    Kind regards.

    Yeh, I know, space on tabs is always a problem.
    Edit:  That is just the adapter that is in the pic.
    I have this one:
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Deleting selected record in Dynamic Internal table

    Hi Friends,
    I want to delete selected row from a dynamic internal table. The selected entry should be deleted from Adobe and as well as Webdynpro abap.
    Kindly help me how to solve this problem.
    Thanks in advance.
    Regards,
    Phani.

    Hi Matthias,
    Thanks a lot for responding.
    In my adobe i kept a check box to delete the record. It should delete the selected ones. But right now, its deleting one by one.
    I have coded following script for delete button:
    IT_TIME_SHEET --> is my internal table
    G_ROW_STATUS is the field to track the action performed.
    var tlength = xfa.resolveNodes("IT_TIME_SHEET.DATA[*]").length;
    for ( var i=0; i<tlength; i++
    if(xfa.resolveNode("IT_TIME_SHEET.DATA["i"].FLAG").rawValue ==
    1 )
    IT_TIME_SHEET.DATA.instanceManager.removeInstance(i);
    G_ROW_STATUS.rawValue = "DELETE";
    In the Webdynpro abap following code I wrote:
        row_count = 1.
        FIELD-SYMBOLS <wa> TYPE zshr_time_sheet_time.
        LOOP AT it_time_sheet ASSIGNING <wa>.
          <wa>-srl_no = row_count.
          row_count = row_count + 1.
        ENDLOOP.
        last_row = <wa>-srl_no.
          DELETE it_time_sheet WHERE srl_no EQ last_row.
    Suppose if two records checkboxes are selected I can loop at the internal table IT_TIME_SHEET in webdynpro and delete where checkbox is selected.
    But problem is once user deletes records, adobe is deleting only one record and if i delete two records from webdynpro it looks like something wrong for the user.
    Please help me how to solve this problem.
    Regards,
    Phani.

  • How to install opensuse-arm-xfce-12.3 on Lenovo A3000 tab

    Sir recently I have bought Lenovo A3000 tab which is having android version 4.2.2 and 16 GB internal memory, 1.2 giga hertz quad core processor and 1GB ram.
    I want to use opensuse on my tab so I have downloaded the file opensuse-arm-xfce-12.3.tar.xz I have extracted successfully it and found .IMG file and opensuse.sh file.
    Kindly suggest how to install the above os in my tab with dual booting ie., opensuse and android.
    I am expecting the two operating systems to be on 16 GB internal memory and so suggest how to partition the internal memory.
    I have searched the net and followed the procedure which is too difficult to understand even though I have performed some of the steps like becoming root, installing busy box,complete Linux installer etc.,.
    when I launch the complete Linux installer app it is showing message as unable to mount the image loop device not working.
    Regards,
    Rupesh.
    Regards,
    Rupesh.

    hi Fabian,
    Welcome to the Forums.
    Can y0u check tjniko s post in this thread as he was able to successfully install Win8.1 on the device.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Select all / Delete selection Translation

    Hi,
    although I am running my Web Dynpro ABAP in Swedish the "Select all / Delete selection" table options are displayed in English. Anyone who knows whether or not this is a bug or a known limitation ... or perhaps something that I can fix?
    Thanks!

    Hi Peter,
    I still do not understand why all the other standard functionalities are translated but not "Select all/Delete selection". Could you be a little more specific how/what you mean with domain translation?
    Thanks!

Maybe you are looking for