Lenovo IdeaCentre A700 4024 uk HDMI ports data specs?

hello all,
i'm after some help specifications for the HDMI in an HDMI out ports of the back of the above all in one. Specifically, I need to know whether they are HDMI 1.4 or HDMI 1.4 a so as to output correctly to a 27 inch 3-D monitor at 1080p at 60 Hz?
I have spoken to Lenovo sales and technical support UK but they are unable to confirm what specifications these HDMI ports are.
I have downloaded all the relevant PDFs available on their website but they are not detailed enough!
if any lenovo staff use this forum i would be greatful as i cant buy without this knowledge.
thanks

Though I am not from Lenovo, you should find out more about hdmi matrix switches at http://www.smartvm.co.uk/video-matrix-switch/hdmi-matrix-switch.html

Similar Messages

  • Lenovo G580 20157 but no HDMI port?

    Hello,
    My brother has recently purchased a Lenovo G580 laptop from New World in Menlyn, Pretoria, South Africa (http://www.newworldmenlyn.co.za)
    According to the advertised specs (http://shop.lenovo.com/us/en/laptops/essential/g-series/g580/index.html#techspecs) and the PDF manual that came with the laptop, this model should definitely have an HDMI port right next to the two USB ports on the left side, as well as Bluetooth connectivity, however neither are present.
    Prior to purchasing from New World he looked at a demo model (the same one) at another store (Incredible Connection - http://www.incredible.co.za) which DID have an HDMI port and Bluetooth.
    As such we are worried that he might have purchased a gray market, refurbished or fake unit.
    When checking the warranty status (with serial number) at http://support.lenovo.com/en_ZA/product-service/warranty-status/default.page?, the warranty shows "active", though.
    The laptop's touchpad is also extremely unreliable, to the point of being impossible to use without causing MAJOR frustration. We tried updating to the latest Windows 8 touchpad drivers and played with all the settings in the ELAN drivers, as well as the default Windows trackpad settings, but nothing helped.
    Please can someone from Lenovo confirm whether this laptop should in fact have an HDMI port, Bluetooth, and a trackpad that works (I will provide the serial nr. in a PM upon request), and what we should do to rectify this problem.
    Appreciate any help.

    Sorry but I can't relate that 20157 number to the 8-digit numbers in the 3book
    Perhaps it's an international model that isn't in the 3book.  Hopefully someone else will join the conversation and shed some light.
    I can say (again) that there are non-bluetooth non-HDMI G580 machines listed so I don't think yours is somehow missing those features "by mistake" from the factory.  More likely your retailer just didn't represent the laptop correctly
    Not speaking for Lenovo...
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • HDMI Port not working on Lenovo G460 Win7-64bit

    I've been trying to solve this for some months now.
    I bought my lenovo G460 with nvidia M310 (with hdmi) this year and have not been able to get the hdmi port to work.
    I have two lcd displays one in our lab and another one at home (LG 2361V-PF) which have hdmi connections in the back.
    In the beginning I was able to get my notebook to work on the display in our office. However, now both displays (work+home) are not working.
    I have tried to reinstall latest nvidia drivers as of 2010-11-02 (ver. 8.16.11.8990) from lenovo, completely restore Operating system and tried different hdmi cables.
    I have even tried to use original drivers and also downgrade that to a lower version all with no luck.
    I have even taken my LG LCD display to the LG After Service Warranty office and have found no issues wrong with the Monitor itself.
    I am sure I have taken all the trouble-shooting methods into consideration so a simple question is...
    Is the hdmi port defective?
    I will take my laptop into the Lenovo After Care service center this week, but before then is there anyone who has had this issue and solved it?  -->or is it just a hardware problem easily fixed with warranty replacement parts.
    Thank you
    Solved!
    Go to Solution.

    ::Update:: ----------> Partially SOLVED
    Lenovo After Service Center Report:
       1. hdmi connection is fine
    They said that it could be a software problem and that they would try to update the driver.
    Partial Solution:
    Use Lenovo Original Drivers, for some reason NVIDIA newest drivers conflict with hdmi port on Lenovo G460 .
    I restored my laptop to factory condition and tested the hdmi connection and it worked for a few seconds ...
    my lcd screen started to flicker and my laptop flickers now when hdmi is connected....(A sign that hdmi is not really broken)
    Will update solution when i get it to work 100%

  • Pc crash IdeaCentre A700

    My pc crashes every time i connect in the internet with any web browser (google chrome, mozilla, internet explorer) but when i play pc games it doesnt crash even with the games that require high specs. like batman arkham city, Far Cry 3 etc. 
    computer name: -----------
    windows version: Windows 7 , 6.1, build: 7600
    windows dir: C:\windows
    Hardware: IdeaCentre A700 10050, LENOVO, 
    CPU: GenuineIntel Intel(R) Core(TM) i5 CPU M 450 @ 2.40GHz Intel586, level: 6
    4 logical processors, active mask: 15
    RAM: 4150788096 total
    VM: 2147352576, free: 1965637632
    these are what written on my crashdump analyze, what does this mean? how can i fix it?
    This was probably caused by the following module: hal.dll (hal+0x12903)
    Bugcheck code: 0x124 (0x0, 0xFFFFFA8004D6B028, 0xBE000000, 0x800400)
    Error: WHEA_UNCORRECTABLE_ERROR
    file path: C:\windows\system32\hal.dll
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: Hardware Abstraction Layer DLL
    Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
    This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
    The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time. 

    ah additional info. every time I open my PC 3 out of 10 it wont boot because of an error ( ERROR 0246: Cmos Battery Failure) is this another problem in my pc? or the same with what causes my pc to crash?

  • Lenovo K1 1304 Tablet - Micro HDMI to DVI No Signal

    Hi,
    I'm having a problem here. I want to connect my Lenovo K1 tablet to a TV or monitor with DVI input using HDMI cable and HDMI to DVI Adapter. This should work perfectly fine since both hdmi and dvi are backwards compatible with each other and I've succesfully connected a different tablet like that before, yet I get no signal when trying to output a video from Lenovo K1 Tablet.
    Micro HDMI output port on my K1 works fine since I can output signal to HDMI input on my TV but not to DVI input using HDMI to DVD Adapter and like I said this should work just fine.
    Any ideas anyone?
    Thanks.

    It doubt the adapter has to be HDCP "compliant", because it should just provide a mapping of pins/wires from HDMI to DVI, so any handshaking would occur between the endpoints (tablet and display device).  In case it helps, here's the pin mapping:
    http://pinouts.ru/VideoCables/hdmi_dvi_cable_pinout.shtml
    There are some different flavors of DVI, such as DVI-D versus DVI-I, with single or dual links - is it possible that there is a mismatch between adapter, cable, and device?

  • HD Audio Pass Through on Mac Mini HDMI port

    There have been various threads realting to this but nothin up to date or resolved as i can determine.  I plan to use a Mac Mini as the core AV processor in a high end 8 channel sound system in a home cinema set up.  The mac mini runing XBMC or similar will need to process high definitiion video files that contain Dolby and DTS True HD 8 channels bit streams and be able to pass these streams unchanged and uncompressed to the HDMI port for external decoding. 
    In previous threads it was identified that there was a hardware and/or OSX operating system limitation that prevented this.  Has this now been solved? It seems surprising that Apple of all people would get this one wrong.  As I have not yet purchased the Mac mini then i am not in a position to experiment as my 2010 macbook probably is not the same hardware.
    Thanks

    I know this thread is a little old now, but I've been wondering the same thing myself - so I googled it and came up with this thread.
    I've just bought a new 7.1 Amp, the Yamaha RXV677 from Richer Sounds. It handles DTS-HD Master Audio 7.1 and Dolby TrueHD 7.1. Up until now I've not been able to try this sound format out as my current 2009 Mac Mini only sends audio through the Optical Out, so the best I can get is Dolby Digital 5.1 pass thru via S/PDIF. I was quite happy with this arrangement, until I get around to buying a blu-ray player. However, I realised my work laptop is a 2014 MacBook Pro with HDMI out. Therefore out of curiosity I decided to download a couple of HD demos from demo-world.eu that have DTS-HD MA 7.1 audio tracks embedded in them. I tried opening them up in VLC media player (version 2.1.5) and hooked up my 2014 MacBook Pro via HDMI to my Amp. To my amazement it worked!! - I got glorious 7.1 DTS-MA into my Amp, and it sounded simply stunning!! In VLC I had two HDMI audio devices to choose from 'HDMI' and 'Encoded HDMI' (or something like that - I'll have to hook it up again to be sure). When using straight HDMI output, my Amp read it as 'PCM Audio' but when using 'Encoded HDMI' it read it as 7.1 DTS Audio giving the sample rate and bit rate. I need to spend a bit more time testing this out - but it definitely works, and it definitely plays in surround from all my available speakers (I have a 5.1 setup, so can't test the other 2 surround channels).
    I have no reason to believe that this will not work from a current Mac Mini with HDMI - although as yet I can't verify this, and I have only tested using VLC player with a .m2ts file.

  • I was using my HDMI port to connect to my TV .port just stopped working

    I was using my HDMI port to connect to my TV .port just stopped working
    HP Pavilion g6 Notebook PC
    Version 6.3.9600 Build 9600

    Hey @kirilsubacs ,
    Welcome to the HP Forum!
    I understand the HDMI port has stopped working on your Pavilion G6 notebook.
    It would help to know exactly which notebook you are using and the installed operating system. For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number? To see which version of Windows you are using click here: Which Windows operating system am I running?
    If this is a new issue I would start by doing a system restore. This will undo any changes to the operating system and uninstall any Windows updates, programs, or program updates installed after the restore date. This will not delete your personal files.
    If that doesn't work try updating the drivers for your graphics card (GPU). You can find the drivers for your notebook here: HP - Drivers & Downloads.
    Let me know if that helps or please provide the model and operating system of the notebook.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Mini HDMI port

    Hi.
    I have Lenovo yoga thinkpad 12 and suddenly mini HDMI port sopped work.
    I'm not albe now to duplicate screen to projector. I tried to check bios or control panel, but with no succes.
    I looked on official graphic driver, but I can't install new driver because of error - your pc doesn't meet minimal requirements.
    I tried to install this driver:
    http://support.lenovo.com/us/en/downloads/ds101969 - 10.18.14.4099
    Now I have installed this version: 10.18.10.3960
    Any advices?
    Thx.

    There is no such thing as a Mini HDMI port on any Mac. I believe you are refering to the Mini Display port, you can connect that to a Mini Display Port to HDMI adapter. I believe the late 2010 MBA's Mini DIsplay port to HDMI supports both audio & video, however you should use the cable Apple recommends for the best results. That cable would be:
    http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er?fnode=MTY1NDA3Ng&mco=MTgwOTAzMjI

  • Lenovo Ideacentre Q150 Multi-Monitor ?

    hello,
    does anybody know if the Lenovo Ideacentre Q150 is able to manage 2 Monitors (first via VGA and second via HDMI)?
    Grafikchip ION (GeForce 9400M)
    Speicher (vorhanden) 512 MB
    Anschlüsse HDMI, VGA
    thanks

    hey sysonic,
    i believe it is possible as there is a HDMI output for it.
    as per page 8 of this PDF - http://consumerdl.lenovo.com.cn/UserFiles/UserGuide/en/User%27s%20guides%20and%20manuals/Q150/Lenovo...
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Lenovo IdeaCentre B520 - Plug in a Vhs and record my old vhs tapes!

    Hi!
    Besides of all i want to thank you for the time you gonna lose to read this post.
    I bought a lenovo ideacentre B520 and i want to record my old vhs tapes.
    I plug in the VHS into the AV in ports (yellow, red and white) and then i switch in the monitor to the av mode.
    I can see the vhs tape in my computer but the problem is that i cant control the pc mode. I'd like to know how can i record the vhs tape in Av mode.
    Thanks for the help, and sorry my english writing...
    Cesar

    You'd need to tell us what kind of film and cameras you have. I think you'll need to buy some equipment to do that.
    An alternative is to send your film to a place like Integrated Imaging and they could transfer it to DVD or another suitable format for iMovie.

  • Lenovo Thinkpad E530 - USB 3.0 Ports Not Working Code 10

    Hi everyone, so I own a Lenovo E530 with Windows 7 and just earlier today I plugged in my optical mouse into it, about 10 minutes in, Windows gave me a "not enough power message" for my USB 3.0 ports on the left side and they just stopped working. I have 3 USB 3.0 ports on the left side of the laptop, and one USB 2.0 on the right which works just fine.
    From there it gave me Code 10 for Teredo Tunneling Pseudo-Interface in the Network Adapter section (which I was able to fix via a registry change) and now what is left to fix is the Intel USB 3.0 eXtensible Host Controller which I cannot seem to fix. I have tried the uninstall/reinstall processes, with Intel's own drivers and Lenovo drivers which were just older version of the Intel USB 3.0 drivers, over and over yet it is still stuck on Code 10, where it will not start.
    I never really overused the USB ports either, aside from plugging in a portable USB fan and portable hard drive here and there, and a USB dongle for a wireless mouse and keyboard (Logitech all-in-ones), that is pretty much all I have done with it. I do not believe the ports are not bad or anything, although it may be a hardware problem, but all 3 USB ports still give power on my fan and external HDs when I plug it in, it is just that Windows does not recognize it and nothing happens when I plug something into. But on the other hand, the USB 2.0 port reads just fine and recognizes everything. I have also tried the Troubleshooter multiple times, but everytime it tries to reinstall I get the "Failed" message.
    Here is a screenshot of what I am talking about.
    http://i.imgur.com/mKqWpFU.png
    http://i.imgur.com/RLkbyHY.png
    I have tried reinstalling and uninstalling the Intel USB 3.0 eXtensible Host Controller Driver for W7 using the ones listed on the drivers page through Lenovo and using the newest version fround on Intel's webpage as well. Having done these I still could not get it working, so I did a full reformat of the Hard Drive, from there I am able to get the USB 2.0 and 1 of the 3 USB 3.0 ports to work (the very top one above/left of the HDMI port) and recognize devices when I plug them into Windows. But this is working through not having the USB 3.0 Driver installed and just the basic one without having any updates/drivers installed on. Once I install the USB 3.0 Driver back it, it goes back to the original problem.
    The problem still persists even though I have done multiple reformats, uninstall/reinstalls, updating to newest drivers and BIOS, etc. I have owned and still own a whole family of Lenovo laptops which still work perfectly fine, but this is the first time I have seen anything like this go wrong in a laptop. Is there anything else I can try to fix this problem? The laptop just went out of warranty a few months ago, and if I were to send it in and get it repaired would it cost me a lot?
    Lenovo Thinkpad Edge E530 w/ i5-3210M
    Lenovo Thinkpad X230t w/ i5-3320M
    Lenovo V570 w/ i5-2410M
    Lenovo Thinkpad Edge 14 w/ i5-480M

    Hi,
    Can you try this
    The Device You're missing drivers for (PCI\VEN_1022&DEV_7814&SUBSYS_380217AA&REV_01) is definitely for AMD USB 3.0, this one's off from AMD WEbsite
    http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx#2
    download the AMD Chipset Drivers see if that'll work.
    Have you installed the energy management?
    If not please install this as well, I'm thinking this is what the other device is for.
    Lenovo Energy Management
    emw7034.exe
    21.4MB
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo IdeaCentre K330B Dual Monitor Possible?

    I was wondering if there was a way to have a dual monitor setup with the Lenovo IdeaCentre K330B. We have the Lenovo IdeaCentre K330B 7747 and this is for an office application so no gaming. The MTM is 77471CU. I cant seem to figure out what type of card is in there. Will I need to install a new graphics card? If so, what card would work?
    Thanks for your help.
    Solved!
    Go to Solution.

    Ok I got this figured out. There is a HDMI out and I couldn't see it because 1. it isdark under the desk and I couldn't move the computer well and 2. I am obviously blind as a bat and didn't see the HDMI out.
    So yes this computer is dual monitor capable

  • How to update drivers for Lenovo IdeaCentre C560?

    Hi all,
    I have PC Lenovo IdeaCentre C560 with Windows 8.1.
    There is installed LSC (Lenovo Solution Centre), which has "System" section and inside it is "Lenovo software update" block, where LSC advices me "Go to Lenovo's website to update the Lenovo software on your PC".
    But there are thess problems:
    There are 20 drivers for C560 for Windows 8.1 on Lenovo website.
    Which of them I have to download and install?
    I have tried at my Device Manager to verify for all of my devices to be last update (it was terrible work) and I always got information that my driver is up-to-date.
    Somebody have told me that LSC is not SUITABLE for C560 machine.
    So I have these questions:
    Does anybody have installed LSC on his C560? A does it work fine (so it find and install always new driver) or he only get abstract ionformation Go to Lenovo's website to update the Lenovo software on your PC?
    Are there other possibilities to regularly update drivers then LSC?
    Thanks.
    Solved!
    Go to Solution.

    Dragnote,
    maybe it was caused my terrible English, so I will try to explain relevant aspects once again:
    1) I bought my Lenovo IdeaCentre C560 (part number: 57322363) on 22th of May this year from "stone" shop, not through internet. The Web site of this shop is www.mironet.cz, but there is not my PC there in actual supply, because the shop stopped to sell this model. But the parameters etc of this model is on Mironet's Web site here:
    http://www.mironet.cz/lenovo-ideacentre-c560-23quo​t-fhd-intel-core-i54570t-36ghz-8gb-1tb-dvdrw-nvidi​...
    but is is in Czech language.
    2) My Windows are in Czech language, so I will translate it for you into English and therefore some informations/messages can be not fully exact. OK?
    2) The LSC program was installed on my new PC with MS Windows 8.1 64-bit. I was only wanted to USE it! And why not. I got with PC only very slim User's Book, where was nothing much usable. And nothing about updating system and drivers, nothing about backuping etc. So I started to use SLC, because it was preinstalled there.
    3) Problems of detect WHICH driver I have to update and HOW to do it:
    3a) I tried three programs for detecting of my not-to-updated drivers: SLC, Detective and Smart Driver Update with these results: SLC only advice me to go to Lenovo website, Detective and Smart Driver Update gave me list of my not-to-update drivers, but the lists were rather different.
    3a) The  link I provided, http://forums.lenovo.com/t5/forums/replypage/board​-id/ideaCentre/message-id/9220, lists 20 drivers and all of them were released in period between 16 Oct 2013 and 01 Dec 2013, so I have used abbreviation "end of last year", but you are right - mostly of them are from 16 Oct 2013.
    3b) I TRIED to compare their date of released with drivers installed on my PC, but I have two basic problems:
    3b.1) How to identify WHICH driver on my PC corresponds to drivers on Lenovo web site?
    The names are NOT the same. For example: on Lenovo Web site is "Realtek Audio Driver V6695 for Microsoft Windows 8.1 (64-bit) - Desktop", released 17 Nov 2013, version: 6.0.1.6695. Then I found on my Device manager "Realtek High Definition Audio". So my question already is: "Is it the corresponding driver or not?".  But let us say: it is.
    So, now we can continue with next information on my driver : date of release is 15 Nov 2013, version: 6.0.1.7093. So I am not sure if these two drivers (one on Lenovo Web site, second on my PC) are the correct PAIR. There is antagonism between date of release and the version number.
    3b.2) How to update, when I already "decided", that my driver is not-to-updated and therefore I need it to update?
    I launch my Device manager, then I choice some driver, then I click on "to update driver software" and there display two possibilities: find driver on computer, or find driver on Internet. So I click on "Find driver on Internet". Then I wait about 10 seconds and then I ALWAYS get the SAME information: "The driver of this device is up-to-date"
    This "optimistic" message I received for about 30 of my drivers. So there are three possible explanations how to explain it:
    1) LSC, Detective and Smart Driver Update lie to me, when they tell me "You have some not-to-update drivers", because in reality all of my drivers ARE up-to-date.
    2) I really have some not-to-update driver but because I cannot address correct WHICH driver is not to-up-date, I try wrong driver to update. Wrong, because it IS up-to-date.
    3) I identify the correct not up-to-date driver but the choise "find driver on Internet" open finding of this procedure in non-Lenovo Web sites.
    And maybe you are right when you write: "Sometimes, on a new system, Lenovo installs drivers that are "newer" than the drivers listed on their site. Don't worry, keep the newer drivers."
    I apologize very much,but I am not able directly to use the information from you.
    I never updated drivers on my old PC (I had it 12 years!), so I have no experiences what happens when I replace my NEW (up-to-date) driver with some OLD driver installed from Lenovo Web site. I am affraid that my keyboard, mouse, screen etc will stop its function.
    When I bought this Lenovo machine, I to myself have told that I will keep my drivers up-to-date, but I do not how.
    Mirek

  • Q700 HDMI Port Failure

    Just bought a Q700 tower...  set it up and everything was working great for about 5 days.  Had success connecting LCD monitor using HDMI port, but when starting-up on day 5 the screen went blank, and haven't been able to get it working again. 
    Am connected now using VGA cable, but obviously want funcationality of the HDMI port back.
    Have verified the monitor and HDMI cable are good by connecting to PS3.
    Have updated display adapter drivers to latest version on Lenovo site.
    Any other ideas?

    Update:
    This Issue has not been resolved, but the best I can figure is that there is some sort of pairing that occurs between my monitor (Samsung 2463UW) and the Q700.
    Occasionally (approx. once per week), when initially starting up, or restarting, or waking the PC up after being in Sleep mode, the HDMI output doesn't work.  The display first goes 'snowy', then cuts to black as described above.
    I can bring functionality back by disconnecting the PC and hooking it up to my TV (Sharp Aquos) with a different HDMI cable.  But that's only half the solution - I also have to connect my PS3 to the Samsung monitor.  Doing only one of these steps does not fix the problem.
    In effect, it seems like I have to pair both the monitor and the Q700 with another device to reset the connections before they will work together again.
    Does this sound familiar, or in anyway logical to anybody?  Maybe it's some sort of ground-loop causing the issue?  I feel like I'm grasping at straws here...

  • Dual DVI Displays (extended desktop) via 1 HDMI Port ?

    Hi, I have a late 2013 MacBook Pro w/Retina Display 15” Quad Core 2.6Ghz i7 with 16Gb ram.
    Running the latest OS (10.10.3) and all latest updates, etc..
    I have 2 23” Apple Cinema Displays which are DVI. I would like them to be used as “Extended Desktop” style on this computer.
    I understand this is possible via the Thunderbolt ports (correct?), but would ideally like them to come out the HDMI port (and work like “Extended Desktop”).
    This is because I will have the bandwidth of my Thunderbolt bus maxed out. And would hate for the video to slow anything down as I will have many drives and interfaces on the TB ports that need the data.
    I am not looking to mirror the displays, but want “Extended Desktop”. I am hoping the 1 HDMI port can support that somehow, maybe with adapters ?
    Any input would be greatly appreciated as far as my options.
    Thanks !

    This thread can be deleted, as I am not getting enough response here, so I posted in another forum.
    Thanks -

Maybe you are looking for

  • Flash Builder 4.7 Embed Error

    I originally posted something similiar in the "Using Flash Builder" section but decided to post something here thinking it would get more coder eyes. This worked in Flash Builder 4.5 using the Flex 4.6 SDK with the AIR 3.5 SDK. However in Flash Build

  • Hiding a subset of records

    We import portfolio data from another system into On Demand. All portfolio data is read-only. Role A users are allowed to view all portfolio records. Role B can only view some of the portfolio records. If Role B is looking at an Account, it is very l

  • AE 2220 - USB Devices Not Working

    My AE 2220 will not properly mount and access USB devices in any of the USB ports.  I've unsuccessfully tried to use three different thumb drives and a Sony camcorder and experimented with every available USB port.  The AE 2220 is running the factory

  • Drawing a horizontal line

    I have a LineChart, with a few series on it, and I want to draw horizontal lines to indicate when the series fell above or below various critical values. I can't find a way to do this other than to make each line a series of two points, but this seem

  • Arch Linux Turkish Community @ 8th Free Software and Linux Festival

    Hey There Guys, We'd love to tell you about the latest news. We were at our stand all day long on the very first day of 8th Free Software and Linux Festival. What we've done? * We've burnt 20 i686 and 10 x86_64 CD images and created paper CD cases an