Lenovo IdeaPad Miix 2 (10") - Windows 8.1 Feature oder Lenovo-Tool?

Hallo,
nach Rücksprache mit dem Support habe ich Windows 8.1 Pro (32 Bit) installiert. Hierzu habe ich alle bestehenden Daten / Installationen gelöscht und Windows 8.1 vom USB-Stick neuinstalliert.
Soweit hat auch alles super gepasst, wie mit dem Support besprochen habe ich danach alle Treiber und das BIOS-Update eingespielt. Auch alle Windows-Updates sind installiert.
Mein Problem ist - ich bekomme es nicht hin, das bei kurzem drücken des Ein- und Ausschalters das das Display abschaltet und Windows gespeert wird. Gerade bei einem Tablet das ich z.B. Unterwegs nutze ist das aber enorm wichtig für mich!
Ist das ein Feature von irgend einem Service-Tool von Lenovo?
Gruß,
nPoday

Das kannst du eigentlich in den Energieoptionen einstellen.
Schau mal unter Erweitere Energieeinstellungen ändern und dort unter Netzschalter und Zuklappen oder ähnlichen Bezeichnungen.

Similar Messages

  • Lenovo IdeaPad U410 with windows 8 . I want add windows 7 64bit error

    Hi, 
    i just buy this laptop that come with windows8, and i want install in dual boot windows 7 wich i use.
    The installation from USB PEN DRIVE START , after change some bios boot setting, but i get the error:
    windows cannot be installed to the disk. the selected disk is of the gpt partition style site
    I read many forum ant it seem problem due to the raid configuration of the 2 disk coming from Lenovo. 
    I would like to mantain this configuration without delete all and format the hard disk, i just want add windows 7 in other partition . Is it possible?
    Any suggestion will be helpful!

    Hi all,
    could not agree more!!! And I don't even wanted to upgrade but simply do ONLY a new, clean install of Win 7. As a result of the really crappy instructions (there aren't any, all that is available are various contradicting posts on the user forum) my machine now even does not get into BIOS anymore!
    And I am currenty in Ecuador, bought the machine in Germany. When I called technical support in Germany all they said, we don't know, send us the laptop. That will esily be half a year until I get that laptop back!
    And all because there is NO guide how to re-partition your HDD and SDD, set up the RAID correctly and install Windows!
    Well, at least there is now light at the end of the tunnel. I got promised a solution how to at least get into BIOS again. Then I STILL have to figure out how to manage to do the clean install....
    I would think it would take an experienced lenovo technican half an hour to write a decent installation guide and put it on the web as a PDF and that would avoid lots of hassle for gzillions of people who buy the u410. And how about actually making the current BIOS and flash instructions available? Can't be all that difficult really...

  • Norton antivirus wont allow firefox to download because it says it's "adware", can the lenovo ideapad download firefox?

    I have a 2003 Lenovo Ideapad run by windows 7 and it wont download firefox. When I click download it asks me if I want to run or save I click run. Then Norton antivirus prevents it from downloading because it says it's "adware". How do I get past this problem??? Thank you for any help it is very much appreciated!

    If you are downloading Firefox from [http://www.mozilla.org/en-US/firefox/features/ Mozilla.org], this download is safe. You can disable your antivirus for the download process.
    <b>WARNING: </b>Always use caution when downloading content from the internet. I will take no responsibility for any damage caused by a download. <b><u>Download at your own risk!</u></b>

  • [Lenovo Ideapad S410p] Help me ! Please ! BIOS of my laptop was corrupted BIOS firmware

       My laptop use Phoenix 89CN25WW and now I want to have a BIOS file of Lenovo Ideapad S410p (touch) or Lenovo Ideapad S510p (touch) to repair the error because BIOS of my laptop was corrupted BIOS firmware    Please help me !    Thank you so much for your support !  Click here for image   Mod's Edit: Image(s) converted to link(s) due to size.  Photos are limited to 100k size per forum guidelines.
                         Please refer to About Posting Pictures for more information.

      Thank you so much for reply ! 
      Can you tell me hold down Fn+R keys or Fn+B keys or Windows+B keys to recovery bios for Lenovo Ideapad S410p from USB flash with CRISIS Recovery Disk Tool (BIOS.WPH, MINIDOS.SYS, PHLASH16.EXE) ?   Thank you so much for helping me ! Good for you ! 
       

  • No Webcam on my Lenovo Ideapad S10 - Please Help

    Hi
    I own a Lenovo Ideapad S10 with Windows XP. 
    When I bought the computer, the inbuilt webcam was working perfectly. Then, all of a sudden, the webcam somehow disappeared. 
    When I press Fn + Esc, it says the Webcam is not installed. 
    I read all the forum posts and tried to down load the Easy Cam Driver for S10 with Windows XP. No Driver shows up for the Camera (http://consumersupport.lenovo.com/us/en/DriversDow​nloads/drivers_list.aspx?CategoryID=43)
    Can someone please help me ?
    Cheers
    Mihir

    un-install drivers, restart your computer and re-install camera drivers for couple of times.
    if it doesn't work, perform clean windows installation otherwise contact local support center.

  • Attention! Laptop Lenovo IdeaPad Flex 10 is not compatible with Windows 8.1

    Attention!
    Laptop Lenovo IdeaPad Flex 10 is not compatible with Windows 8.1 and Windows 8.1 Update (pre-installed operating system is Windows 8.0) .
    More specifically, after update for Windows 8.1 all the  drivers (including the latest)  Intel (R) Iris (TM) graphics, Intel (R) Iris (TM) Pro graphics and Intel (R) HD GRAPHICS  installed on this laptop  does not support out of the sleep mode.
    This has been checked many times by different users laptop Flex 10.
    Any comments from Lenovo are absent. By Lenovo specifications for this notebook there are no conflicts with Windows 8.1. It is not true!
    It is unclear why Lenovo has admitted this deficiency.
    I think Lenovo Flex 10 is a mistake that will cost the company Lenovo.

    Mine came with Windows 8.1

  • Instal windows 8.1 with CD-rom on new lenovo ideapad flex

    Hi, 
    we are struggling to start to use our new computer : lenovo ideapad flex 14. We got it without windows 8.1 installed and got therefore a CD-rom for installing windows 8.1. 
    We dont want to USB key and are willing to install windows via external cd drive connected through USB plugs. is it possible and how?
    thanks for your help ?
    JeanB

    I managed to install windows 8.1 in my flex 14 by using external usb cdrom and in UEFI mode. It is possible to do

  • Wireless Bluetooth Speakers (TDK A33s) Won't Stay Paired to Windows 8.1 (Lenovo IdeaPad Y580)

    Hello,
    I recently acquired a pair of Bluetooth speakers (the TDK A33), and am unable to connect it to my PC. The Bluetooth interface sees the speakers, connects with
    them for a few seconds when I try to pair, and then disconnects. The speakers connect to my phone just fine, so it's not the speakers (and TDK tech support hasn't exactly been very helpful). 
    I'm running Windows 8.1 on a Lenovo IdeaPad Y580; I tried updating
    my Bluetooth drivers, as a few sites recommended (pulling them from them Lenovo site), but still no dice. I've read a few things that seem to suggest is a
    Windows 8.1 issue. 
    Any advice would be much appreciated!
    Thanks,
    B

    try to check whether you have the latest version
    http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-y-series-laptops/ideapad-y580?c=1
    check also whether this Bluetooth can be connected to other device
    you can also try to delete all Bluetooth profile, and test
    try to other PC with Windows 8.1 OS if any

  • Upgraded to Windows 10 on Lenovo Ideapad p400 touch, screen went dim

    Hello,I just installed the free Windows 10 upgrade on my Lenovo Ideapad p400 touch last night.  I woke up this morning and booted up my computer, and everything was fine until I attempted to change the brightness.  When I tried to do this, my screen went very dim, and now I can't adjust the brightness (and I can't read my screen well, either).  Normally, I would install/reinstall the video driver in order to fix this problem (recommended for other users with similar issues), but I currently do not see a Windows 10 version of the driver I need on the Lenovo website.I was wondering:a) if/when a new driver would be available to install (if that's the recommended solution)b) is there something else going on?c) Windows 10 allows you to revert back to Windows 8.1 within the first month of use.  Should I just do this?d) Is the p400 touch capable of running Windows 10? Why or why not?Thank you!

    Hello.  I also have a Lenovo Ideapad p400 touch.  Screen also went dim on me. In Windows 8.1 just uninstalling graphic's driver worked.  It was Control Panel, Device Manager and then Display Adapters.  That doesn't work with Windows 10. The other solution of rebooting and press the increase brightness key at the Lenovo logo somewhat works but it doesn't turn the brightness all the way up. So I found this worked for me: Go here:  http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-p-series-laptops/ideapad-p400-touch-notebook/downloads/DS031547 And just download and reinstall the old graphics driver for Windows 8.  That finally got me back to maximum brightness.

  • How to reformat lenovo ideapad s410p Touch (from windows 8 - windows 7)

    hi guys, pls somebody make a guide how to reformat lenovo ideapad s410p Touch . thanks

    You should be able to get Win 7 Pro 32, as it is listed here:
    LINK
    So speak to Lenovo indeed ...
    Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer.

  • Lenovo Ideapad Yoga 13 Recovery Issues

    I'm very disappointed from Lenovo for producing Laptop without complete recovery solution.
    I mistakely formated the hard drive of Lenovo IdeaPad Yoga 13, so I lost the recovery, so I called Contact Centre and they pointed me to Jumbo Electronics Company in Abu Dhabi of which are aotherized to do services for Lenovo. I went to them to save time, and get my laptop back to the initial state of which I bought, instead of getting the original state of how I bought the laptop which was:
    1. Windows 8.1 Single Language.
    2. All Drivers are Installed.
    3. At Start-Up, I should be getting to put in my sync account while it's preparing windows for first use.
    I got the following:
    1. Windows 8 Single Language installed. (Not 8.1)
    2. Drivers are installed.
    3. Recovery is supposed to be back.
    4. Local User Account "Lenovo" was created.
    OK, Skip it, it's fine. I thought about trying to do recovery to make sure of the recovery working before I do back up of it, here is what I got:
    1. Windows 8 Single Language Installed (Not 8.1)
    2. Not all drivers are installed (For ex. Wireless Driver which is very important for this laptop since no LAN no other connection except wireless)
    So I thought they gave me the non-original recovery because of the missing drivers which was not believable to me.
    I contacted "Service Centre for IdeaPad Within UAE" ended up telling me that that was the original copy of the Recovery and Yes, it does not Install the Wireless Drivers! And that he himself tried it at his side and confirms it!
    Can somebody explain to me how come that I paid for recovery to recover the laptop to the initial state and I did not get the real initial state of the laptop?
    How come at the service centre they don't tell me "Warning" about the wireless and that I have to download and back-up the drivers before doing the recovery of the laptop?
    How come actually Lenovo produces a laptop with recovery missing drivers?
    VERY DISAPPOINTING! VERY ANGRY AT LENOVO! If I CAN RETURN THE LAPTOP AND BUY FROM DIFFERENT BRAND, I WOULD DO SO!
    BIOS FEATURES ARE POOR NO BOOTING FROM SD CARD AVAILABLE!
    WIRELESS IS POOR IN QUALITY WHILE ITS THE ONLY AND MAIN CONNECTION FOR THE LAPTOP!
    Simply you are SELLING half Quality Products, WORST RECOVERY SOLUTIONS EVER! AND EXPENSIVE FOR NOTHING!
    VERY DISAPPOINTED AT LENOVO PRODUCTS FROM THE FIRST IMPRESSION OF LENOVO IDEAPAD YOGA 13!

    I have the same problem.  If I continually power cycle the machine (either via CTRL-ALT-DEL or the switch) combined with either plugging or unplugging it from power I can eventually get it to boot up.  No idea how to fix it yet.  I noticed that the fan doesnt seem to be running when it doesn't boot and it is almost like it has to "warm up" or something before it will boot to the hard drive.  Any fixes would be greatly appreciated.

  • [concluded] Enabling SLI (Lenovo Ideapad y500 / dual gt 650m)

    final edit:
    Apparently there is no support for sli on mobile nvidia gpu. Thank you ever so much Nvidia, you willf orever hold a special place in my heart..
    I've miracously gotten everything else to work. Only thing left is enabling sli, which I haven't been able to.
    As far as I know, I've follow the instruction to the letter, but all I get i a black screen and a log with no particular useful information that I can find:
    [ 13.106]
    X.Org X Server 1.15.1
    Release Date: 2014-04-13
    [ 13.106] X Protocol Version 11, Revision 0
    [ 13.106] Build Operating System: Linux 3.14.0-4-ARCH x86_64
    [ 13.106] Current Operating System: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64
    [ 13.106] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
    [ 13.106] Build Date: 14 April 2014 08:39:09AM
    [ 13.106]
    [ 13.106] Current version of pixman: 0.32.4
    [ 13.106] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 13.106] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 13.107] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 31 17:50:00 2014
    [ 13.108] (==) Using config file: "/etc/X11/xorg.conf"
    [ 13.108] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 13.109] (==) ServerLayout "Layout0"
    [ 13.109] (**) |-->Screen "Screen0" (0)
    [ 13.109] (**) | |-->Monitor "Monitor0"
    [ 13.110] (**) | |-->Device "Device0"
    [ 13.110] (**) |-->Input Device "Keyboard0"
    [ 13.110] (**) |-->Input Device "Mouse0"
    [ 13.110] (**) Option "BlankTime" "0"
    [ 13.110] (==) Automatically adding devices
    [ 13.110] (==) Automatically enabling devices
    [ 13.110] (==) Automatically adding GPU devices
    [ 13.112] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 13.112] Entry deleted from font path.
    [ 13.113] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 13.113] Entry deleted from font path.
    [ 13.113] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 13.114] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 13.114] Entry deleted from font path.
    [ 13.114] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 13.114] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 13.114] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 13.114] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 13.114] (WW) Disabling Keyboard0
    [ 13.114] (WW) Disabling Mouse0
    [ 13.114] (II) Loader magic: 0x804c80
    [ 13.114] (II) Module ABI versions:
    [ 13.114] X.Org ANSI C Emulation: 0.4
    [ 13.114] X.Org Video Driver: 15.0
    [ 13.114] X.Org XInput driver : 20.0
    [ 13.114] X.Org Server Extension : 8.0
    [ 13.114] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 13.114] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 13.117] (--) PCI:*(0:1:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
    [ 13.117] (--) PCI: (0:2:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
    [ 13.117] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 13.117] Initializing built-in extension Generic Event Extension
    [ 13.117] Initializing built-in extension SHAPE
    [ 13.117] Initializing built-in extension MIT-SHM
    [ 13.117] Initializing built-in extension XInputExtension
    [ 13.117] Initializing built-in extension XTEST
    [ 13.117] Initializing built-in extension BIG-REQUESTS
    [ 13.117] Initializing built-in extension SYNC
    [ 13.117] Initializing built-in extension XKEYBOARD
    [ 13.118] Initializing built-in extension XC-MISC
    [ 13.118] Initializing built-in extension SECURITY
    [ 13.118] Initializing built-in extension XINERAMA
    [ 13.118] Initializing built-in extension XFIXES
    [ 13.118] Initializing built-in extension RENDER
    [ 13.118] Initializing built-in extension RANDR
    [ 13.118] Initializing built-in extension COMPOSITE
    [ 13.118] Initializing built-in extension DAMAGE
    [ 13.118] Initializing built-in extension MIT-SCREEN-SAVER
    [ 13.118] Initializing built-in extension DOUBLE-BUFFER
    [ 13.118] Initializing built-in extension RECORD
    [ 13.118] Initializing built-in extension DPMS
    [ 13.118] Initializing built-in extension Present
    [ 13.118] Initializing built-in extension DRI3
    [ 13.118] Initializing built-in extension X-Resource
    [ 13.118] Initializing built-in extension XVideo
    [ 13.118] Initializing built-in extension XVideo-MotionCompensation
    [ 13.118] Initializing built-in extension XFree86-VidModeExtension
    [ 13.118] Initializing built-in extension XFree86-DGA
    [ 13.119] Initializing built-in extension XFree86-DRI
    [ 13.119] Initializing built-in extension DRI2
    [ 13.119] (II) LoadModule: "glx"
    [ 13.121] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 13.212] (II) Module glx: vendor="NVIDIA Corporation"
    [ 13.212] compiled for 4.0.2, module version = 1.0.0
    [ 13.212] Module class: X.Org Server Extension
    [ 13.212] (II) NVIDIA GLX Module 337.19 Tue Apr 29 19:48:33 PDT 2014
    [ 13.212] Loading extension GLX
    [ 13.212] (II) LoadModule: "nvidia"
    [ 13.212] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 13.219] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 13.219] compiled for 4.0.2, module version = 1.0.0
    [ 13.219] Module class: X.Org Video Driver
    [ 13.220] (II) NVIDIA dlloader X Driver 337.19 Tue Apr 29 19:22:36 PDT 2014
    [ 13.220] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 13.220] (++) using VT number 1
    [ 13.221] (II) Loading sub module "fb"
    [ 13.221] (II) LoadModule: "fb"
    [ 13.221] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 13.222] (II) Module fb: vendor="X.Org Foundation"
    [ 13.222] compiled for 1.15.1, module version = 1.0.0
    [ 13.222] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 13.222] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 13.222] (II) Loading sub module "wfb"
    [ 13.222] (II) LoadModule: "wfb"
    [ 13.222] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 13.223] (II) Module wfb: vendor="X.Org Foundation"
    [ 13.223] compiled for 1.15.1, module version = 1.0.0
    [ 13.223] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 13.223] (II) Loading sub module "ramdac"
    [ 13.224] (II) LoadModule: "ramdac"
    [ 13.224] (II) Module "ramdac" already built-in
    [ 13.237] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 13.237] (==) NVIDIA(0): RGB weight 888
    [ 13.237] (==) NVIDIA(0): Default visual is TrueColor
    [ 13.237] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 13.238] (**) NVIDIA(0): Option "NoLogo" "True"
    [ 13.238] (**) NVIDIA(0): Option "SLI" "Auto"
    [ 13.238] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes"
    [ 13.238] (**) NVIDIA(0): NVIDIA SLI auto-select rendering option.
    [ 13.238] (**) NVIDIA(0): Option "UseEDID" "FALSE"
    [ 13.238] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
    [ 13.238] (**) NVIDIA(0): Enabling 2D acceleration
    [ 13.238] (**) NVIDIA(0): Ignoring EDIDs
    [ 17.131] (WW) NVIDIA(GPU-0): Failed to initialize the SLI configuration for the NVIDIA
    [ 17.131] (WW) NVIDIA(GPU-0): graphics device PCI:1:0:0. Please see Chapter 29:
    [ 17.131] (WW) NVIDIA(GPU-0): Configuring SLI and Multi-GPU FrameRendering in the README
    [ 17.131] (WW) NVIDIA(GPU-0): for troubleshooting suggestions.
    In the end, all that I can learn from this is that stuff don't work, not why or how to fix it. A bit annoying to be blunt.
    I've been googling around for answers, but the closest thing I've come to an answer, and I do hope it isn't true, is that sli om mobile nvidia gpu is not supported under linux. I've been unable to confirm this.
    I do hope you can help.
    Best regards.
    edit:
    Just for kicks, here's my xorg.conf:
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 337.19 (buildmeister@swio-display-x64-rhel04-03) Tue Apr 29 20:34:50 PDT 2014
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "BlankTime" "0"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 66.5 - 66.5
    VertRefresh 59.9
    ModeLine "1920x1080" 138.500 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync
    Option "DPMS"
    EndSection
    Section "Device"
    BusID "PCI:1:0:0"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "metamodes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
    Option "NoLogo" "True"
    Option "ModeValidation" "AllowNonEdidModes"
    Option "UseEDID" "FALSE"
    Option "SLI" "Auto"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Ya, it's a mess, but nothing particular wrong with is that I can see.
    edit2:
    Just in case some information is lagging, here is the nvidia compiled bug report in it's entirety:
    Start of NVIDIA bug report log file. Please include this file, along
    with a detailed description of your problem, when reporting a graphics
    driver bug via the NVIDIA Linux forum (see devtalk.nvidia.com)
    or by sending email to '[email protected]'.
    nvidia-bug-report.sh Version: 17818519
    Date: lør maj 31 21:11:50 CEST 2014
    uname: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64 GNU/Linux
    command line flags:
    *** /etc/issue
    *** ls: -rw-r--r-- 1 root root 20 2013-05-31 20:40:23.000000000 +0200 /etc/issue
    Arch Linux \r (\l)
    *** /var/log/nvidia-installer.log does not exist
    *** /var/log/Xorg.0.log
    *** ls: -rw-r--r-- 1 root zacariaz 7488 2014-05-31 21:10:38.492892729 +0200 /var/log/Xorg.0.log
    [ 11.874]
    X.Org X Server 1.15.1
    Release Date: 2014-04-13
    [ 11.874] X Protocol Version 11, Revision 0
    [ 11.874] Build Operating System: Linux 3.14.0-4-ARCH x86_64
    [ 11.875] Current Operating System: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64
    [ 11.875] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
    [ 11.875] Build Date: 14 April 2014 08:39:09AM
    [ 11.875]
    [ 11.875] Current version of pixman: 0.32.4
    [ 11.875] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 11.875] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 11.875] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 31 21:10:34 2014
    [ 11.877] (==) Using config file: "/etc/X11/xorg.conf"
    [ 11.877] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 11.878] (==) ServerLayout "Layout0"
    [ 11.878] (**) |-->Screen "Screen0" (0)
    [ 11.878] (**) | |-->Monitor "Monitor0"
    [ 11.878] (**) | |-->Device "Device0"
    [ 11.878] (**) |-->Input Device "Keyboard0"
    [ 11.878] (**) |-->Input Device "Mouse0"
    [ 11.878] (**) Option "BlankTime" "0"
    [ 11.878] (==) Automatically adding devices
    [ 11.878] (==) Automatically enabling devices
    [ 11.878] (==) Automatically adding GPU devices
    [ 11.881] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 11.881] Entry deleted from font path.
    [ 11.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 11.882] Entry deleted from font path.
    [ 11.882] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 11.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 11.882] Entry deleted from font path.
    [ 11.882] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 11.882] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 11.882] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 11.882] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 11.882] (WW) Disabling Keyboard0
    [ 11.882] (WW) Disabling Mouse0
    [ 11.882] (II) Loader magic: 0x804c80
    [ 11.882] (II) Module ABI versions:
    [ 11.882] X.Org ANSI C Emulation: 0.4
    [ 11.882] X.Org Video Driver: 15.0
    [ 11.882] X.Org XInput driver : 20.0
    [ 11.882] X.Org Server Extension : 8.0
    [ 11.883] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 11.883] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 11.885] (--) PCI:*(0:1:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
    [ 11.885] (--) PCI: (0:2:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
    [ 11.885] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 11.886] Initializing built-in extension Generic Event Extension
    [ 11.886] Initializing built-in extension SHAPE
    [ 11.886] Initializing built-in extension MIT-SHM
    [ 11.886] Initializing built-in extension XInputExtension
    [ 11.886] Initializing built-in extension XTEST
    [ 11.886] Initializing built-in extension BIG-REQUESTS
    [ 11.886] Initializing built-in extension SYNC
    [ 11.886] Initializing built-in extension XKEYBOARD
    [ 11.886] Initializing built-in extension XC-MISC
    [ 11.886] Initializing built-in extension SECURITY
    [ 11.886] Initializing built-in extension XINERAMA
    [ 11.886] Initializing built-in extension XFIXES
    [ 11.886] Initializing built-in extension RENDER
    [ 11.886] Initializing built-in extension RANDR
    [ 11.886] Initializing built-in extension COMPOSITE
    [ 11.886] Initializing built-in extension DAMAGE
    [ 11.886] Initializing built-in extension MIT-SCREEN-SAVER
    [ 11.886] Initializing built-in extension DOUBLE-BUFFER
    [ 11.887] Initializing built-in extension RECORD
    [ 11.887] Initializing built-in extension DPMS
    [ 11.887] Initializing built-in extension Present
    [ 11.887] Initializing built-in extension DRI3
    [ 11.887] Initializing built-in extension X-Resource
    [ 11.887] Initializing built-in extension XVideo
    [ 11.887] Initializing built-in extension XVideo-MotionCompensation
    [ 11.887] Initializing built-in extension XFree86-VidModeExtension
    [ 11.887] Initializing built-in extension XFree86-DGA
    [ 11.887] Initializing built-in extension XFree86-DRI
    [ 11.887] Initializing built-in extension DRI2
    [ 11.887] (II) LoadModule: "glx"
    [ 11.889] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 11.978] (II) Module glx: vendor="NVIDIA Corporation"
    [ 11.978] compiled for 4.0.2, module version = 1.0.0
    [ 11.978] Module class: X.Org Server Extension
    [ 11.978] (II) NVIDIA GLX Module 337.19 Tue Apr 29 19:48:33 PDT 2014
    [ 11.979] Loading extension GLX
    [ 11.979] (II) LoadModule: "nvidia"
    [ 11.979] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 11.986] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 11.986] compiled for 4.0.2, module version = 1.0.0
    [ 11.986] Module class: X.Org Video Driver
    [ 11.986] (II) NVIDIA dlloader X Driver 337.19 Tue Apr 29 19:22:36 PDT 2014
    [ 11.986] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 11.987] (++) using VT number 1
    [ 11.988] (II) Loading sub module "fb"
    [ 11.988] (II) LoadModule: "fb"
    [ 11.988] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 11.989] (II) Module fb: vendor="X.Org Foundation"
    [ 11.989] compiled for 1.15.1, module version = 1.0.0
    [ 11.989] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 11.989] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 11.989] (II) Loading sub module "wfb"
    [ 11.989] (II) LoadModule: "wfb"
    [ 11.989] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 11.990] (II) Module wfb: vendor="X.Org Foundation"
    [ 11.990] compiled for 1.15.1, module version = 1.0.0
    [ 11.990] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 11.990] (II) Loading sub module "ramdac"
    [ 11.990] (II) LoadModule: "ramdac"
    [ 11.990] (II) Module "ramdac" already built-in
    [ 12.004] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 12.004] (==) NVIDIA(0): RGB weight 888
    [ 12.004] (==) NVIDIA(0): Default visual is TrueColor
    [ 12.004] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 12.004] (**) NVIDIA(0): Option "NoLogo" "True"
    [ 12.004] (**) NVIDIA(0): Option "SLI" "Auto"
    [ 12.004] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes"
    [ 12.004] (**) NVIDIA(0): NVIDIA SLI auto-select rendering option.
    [ 12.004] (**) NVIDIA(0): Option "UseEDID" "FALSE"
    [ 12.004] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
    [ 12.004] (**) NVIDIA(0): Enabling 2D acceleration
    [ 12.004] (**) NVIDIA(0): Ignoring EDIDs
    [ 15.847] (WW) NVIDIA(GPU-0): Failed to initialize the SLI configuration for the NVIDIA
    [ 15.847] (WW) NVIDIA(GPU-0): graphics device PCI:1:0:0. Please see Chapter 29:
    [ 15.847] (WW) NVIDIA(GPU-0): Configuring SLI and Multi-GPU FrameRendering in the README
    [ 15.847] (WW) NVIDIA(GPU-0): for troubleshooting suggestions.
    *** /etc/X11/xorg.conf
    *** ls: -rw-r--r-- 1 root root 1733 2014-05-31 21:10:12.876322985 +0200 /etc/X11/xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 337.19 (buildmeister@swio-display-x64-rhel04-03) Tue Apr 29 20:34:50 PDT 2014
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "BlankTime" "0"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 66.5 - 66.5
    VertRefresh 59.9
    ModeLine "1920x1080" 138.500 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync
    Option "DPMS"
    EndSection
    Section "Device"
    BusID "PCI:1:0:0"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "metamodes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
    Option "NoLogo" "True"
    Option "ModeValidation" "AllowNonEdidModes"
    Option "UseEDID" "FALSE"
    Option "SLI" "Auto"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    *** /etc/X11/xorg.conf.d/10-evdev.conf
    *** ls: -rw-r--r-- 1 root root 1099 2014-04-14 10:40:04.000000000 +0200 /etc/X11/xorg.conf.d/10-evdev.conf
    # Catch-all evdev loader for udev-based systems
    # We don't simply match on any device since that also adds accelerometers
    # and other devices that we don't really want to use. The list below
    # matches everything but joysticks.
    Section "InputClass"
    Identifier "evdev pointer catchall"
    MatchIsPointer "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev keyboard catchall"
    MatchIsKeyboard "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev touchpad catchall"
    MatchIsTouchpad "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev tablet catchall"
    MatchIsTablet "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev touchscreen catchall"
    MatchIsTouchscreen "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    *** /etc/X11/xorg.conf.d/10-keyboard.conf
    *** ls: -rw-r--r-- 1 root root 201 2014-05-07 20:02:13.920335503 +0200 /etc/X11/xorg.conf.d/10-keyboard.conf
    Section "InputClass"
    Identifier "system-keyboard"
    MatchIsKeyboard "on"
    Option "XkbLayout" "dk"
    Option "XkbModel" "pc104"
    Option "XkbVariant" "qwerty"
    EndSection
    *** /etc/X11/xorg.conf.d/10-quirks.conf
    *** ls: -rw-r--r-- 1 root root 377 2014-04-14 10:40:06.000000000 +0200 /etc/X11/xorg.conf.d/10-quirks.conf
    # Collection of quirks and blacklist/whitelists for specific devices.
    # Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
    # http://bugs.freedesktop.org/show_bug.cgi?id=22442
    Section "InputClass"
    Identifier "ThinkPad HDAPS accelerometer blacklist"
    MatchProduct "ThinkPad HDAPS accelerometer data"
    Option "Ignore" "on"
    EndSection
    *** /home/zacariaz/.nvidia-settings-rc
    *** ls: -rw-r--r-- 1 zacariaz users 1982 2014-05-31 20:34:36.266975242 +0200 /home/zacariaz/.nvidia-settings-rc
    # /home/zacariaz/.nvidia-settings-rc
    # Configuration file for nvidia-settings - the NVIDIA X Server Settings utility
    # Generated on Sat May 31 20:34:36 2014
    # ConfigProperties:
    RcFileLocale = C
    ToolTips = Yes
    DisplayStatusBar = Yes
    SliderTextEntries = Yes
    IncludeDisplayNameInConfigFile = No
    ShowQuitDialog = Yes
    UpdateRulesOnProfileNameChange = Yes
    Timer = PowerMizer_Monitor_(GPU_1),Yes,1000
    Timer = Thermal_Monitor_(GPU_1),Yes,1000
    Timer = Memory_Used_(GPU_1),Yes,3000
    Timer = Memory_Used_(GPU_0),Yes,3000
    Timer = Thermal_Monitor_(GPU_0),Yes,1000
    Timer = PowerMizer_Monitor_(GPU_0),Yes,1000
    # Attributes:
    0/SyncToVBlank=1
    0/LogAniso=0
    0/FSAA=0
    0/TextureSharpen=0
    0/TextureClamping=1
    0/FXAA=0
    0/AllowFlipping=1
    0/FSAAAppControlled=1
    0/LogAnisoAppControlled=1
    0/OpenGLImageSettings=3
    0/FSAAAppEnhanced=0
    0/XVideoSyncToDisplayID=VGA-0
    [DPY:VGA-0]/Dithering=0
    [DPY:VGA-0]/DitheringMode=0
    [DPY:VGA-0]/DitheringDepth=0
    [DPY:VGA-0]/SynchronousPaletteUpdates=0
    [DPY:LVDS-0]/Dithering=0
    [DPY:LVDS-0]/DitheringMode=0
    [DPY:LVDS-0]/DitheringDepth=0
    [DPY:LVDS-0]/SynchronousPaletteUpdates=0
    [DPY:HDMI-0]/Dithering=0
    [DPY:HDMI-0]/DitheringMode=0
    [DPY:HDMI-0]/DitheringDepth=0
    [DPY:HDMI-0]/SynchronousPaletteUpdates=0
    [DPY:VGA-0]/Dithering=0
    [DPY:VGA-0]/DitheringMode=0
    [DPY:VGA-0]/DitheringDepth=0
    [DPY:VGA-0]/SynchronousPaletteUpdates=0
    [DPY:LVDS-0]/RedBrightness=0.000000
    [DPY:LVDS-0]/GreenBrightness=0.000000
    [DPY:LVDS-0]/BlueBrightness=0.000000
    [DPY:LVDS-0]/RedContrast=0.000000
    [DPY:LVDS-0]/GreenContrast=0.000000
    [DPY:LVDS-0]/BlueContrast=0.000000
    [DPY:LVDS-0]/RedGamma=1.000000
    [DPY:LVDS-0]/GreenGamma=1.000000
    [DPY:LVDS-0]/BlueGamma=1.000000
    [DPY:LVDS-0]/Dithering=0
    [DPY:LVDS-0]/DitheringMode=0
    [DPY:LVDS-0]/DitheringDepth=0
    [DPY:LVDS-0]/DigitalVibrance=0
    [DPY:LVDS-0]/ColorSpace=0
    [DPY:LVDS-0]/ColorRange=0
    [DPY:LVDS-0]/SynchronousPaletteUpdates=0
    [DPY:HDMI-0]/Dithering=0
    [DPY:HDMI-0]/DitheringMode=0
    [DPY:HDMI-0]/DitheringDepth=0
    [DPY:HDMI-0]/SynchronousPaletteUpdates=0
    *** /usr/share/nvidia/nvidia-application-profiles-337.19-rc
    *** ls: -rw-r--r-- 1 root root 2310 2014-05-20 14:28:33.000000000 +0200 /usr/share/nvidia/nvidia-application-profiles-337.19-rc
    # Application profiles for the NVIDIA Linux graphics driver, version 337.19
    # Last modified: Tue Apr 29 19:51:54 PDT 2014
    # These profiles were provided by NVIDIA and should not be modified. If you
    # wish to change the defaults provided here, you can override them by creating
    # custom rules in /etc/nvidia/nvidia-application-profiles-rc (which will apply
    # system-wide) or, for a given user, $HOME/.nv/nvidia-application-profiles-rc
    # (which will apply to that particular user). See the "APPLICATION PROFILE
    # SEARCH PATH" section of the NVIDIA Linux Graphics Driver README for more
    # information.
    "profiles" : [
    "name" : "NonConformantBlitFramebufferScissor",
    "settings" : [ "GLConformantBlitFramebufferScissor", false ]
    "name" : "CL1C",
    "settings" : [ "0x528ab3", 1 ]
    "name" : "FA0",
    "settings" : [ "10572898", 0 ]
    "name" : "ExactGLESVersion",
    "settings" : [ "ForceRequestedESVersion", 1 ]
    "name" : "BGTE",
    "settings" : [ "GLAppReturnOnlyBasicGlslType", 1 ]
    "rules" : [
    # Work around GNOME bug 690451 (see
    # https://bugzilla.gnome.org/show_bug.cgi?id=690451)
    "pattern" : {
    "feature" : "dso",
    "matches" : "libcogl.so"
    "profile" : "NonConformantBlitFramebufferScissor"
    { "pattern" : "Maya2014", "profile" : "CL1C" },
    { "pattern" : "xsi", "profile" : "CL1C" },
    { "pattern" : "HoudiniFX", "profile" : "CL1C" },
    { "pattern" : "katana", "profile" : "CL1C" },
    { "pattern" : "Autodesk Mudbox 2014 64-bit", "profile" : "CL1C" },
    { "pattern" : "octane", "profile" : "CL1C" },
    { "pattern" : "Fusion64_6.4", "profile" : "CL1C" },
    { "pattern" : "Nuke7.0", "profile" : "CL1C" },
    { "pattern" : "vray.exe", "profile" : "CL1C" },
    { "pattern" : "vray.bin", "profile" : "CL1C" },
    { "pattern" : "kwin_gles", "profile" : "FA0" },
    { "pattern" : "kwin_gles", "profile" : "ExactGLESVersion" },
    { "pattern" : "heaven_x86", "profile" : "BGTE" },
    { "pattern" : "heaven_x64", "profile" : "BGTE" }
    Skipping ldd output (glxinfo not found)
    /sbin/lspci -d "10de:*" -v -xxx
    01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M] (rev a1) (prog-if 00 [VGA controller])
    Subsystem: Lenovo Device 3972
    Flags: bus master, fast devsel, latency 0, IRQ 16
    Memory at b3000000 (32-bit, non-prefetchable) [size=16M]
    Memory at a0000000 (64-bit, prefetchable) [size=256M]
    Memory at b0000000 (64-bit, prefetchable) [size=32M]
    I/O ports at 4000 [size=128]
    Expansion ROM at b4080000 [disabled] [size=512K]
    Capabilities: [60] Power Management version 3
    Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [78] Express Endpoint, MSI 00
    Capabilities: [b4] Vendor Specific Information: Len=14 <?>
    Capabilities: [100] Virtual Channel
    Capabilities: [128] Power Budgeting <?>
    Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
    Capabilities: [900] #19
    Kernel driver in use: nvidia
    Kernel modules: nouveau, nvidia
    00: de 10 d1 0f 07 00 10 00 a1 00 00 03 10 00 80 00
    10: 00 00 00 b3 0c 00 00 a0 00 00 00 00 0c 00 00 b0
    20: 00 00 00 00 01 40 00 00 00 00 00 00 aa 17 72 39
    30: 00 00 f8 ff 60 00 00 00 00 00 00 00 00 01 00 00
    40: aa 17 72 39 00 00 00 00 00 00 00 00 00 00 00 00
    50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
    60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
    70: 00 00 00 00 00 00 00 00 10 b4 02 00 e1 8d 2c 01
    80: 30 29 00 00 03 3d 45 00 43 00 81 10 00 00 00 00
    90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
    a0: 00 00 00 00 0e 00 00 00 03 00 01 00 00 00 00 00
    b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00
    c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    01:00.1 Audio device: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)
    Subsystem: Lenovo Device 3977
    Flags: bus master, fast devsel, latency 0, IRQ 17
    Memory at b4000000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: [60] Power Management version 3
    Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [78] Express Endpoint, MSI 00
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    00: de 10 1b 0e 06 00 10 00 a1 00 03 04 10 00 80 00
    10: 00 00 00 b4 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 77 39
    30: 00 00 00 00 60 00 00 00 00 00 00 00 00 02 00 00
    40: aa 17 77 39 00 00 00 00 00 00 00 00 00 00 00 00
    50: 00 00 00 00 00 00 00 00 ce d6 23 00 00 00 00 00
    60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
    70: 00 00 00 00 00 00 00 00 10 00 02 00 e1 8d 2c 01
    80: 30 29 00 00 03 3d 45 00 43 00 81 10 00 00 00 00
    90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
    a0: 00 00 00 00 0e 00 00 00 00 00 01 00 00 00 00 00
    b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    02:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M] (rev a1) (prog-if 00 [VGA controller])
    Subsystem: Lenovo Device 3972
    Flags: bus master, fast devsel, latency 0, IRQ 17
    Memory at b2000000 (32-bit, non-prefetchable) [size=16M]
    Memory at c0000000 (64-bit, prefetchable) [size=256M]
    Memory at d0000000 (64-bit, prefetchable) [size=32M]
    I/O ports at 3000 [size=128]
    Expansion ROM at <ignored> [disabled]
    Capabilities: [60] Power Management version 3
    Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [78] Express Endpoint, MSI 00
    Capabilities: [b4] Vendor Specific Information: Len=14 <?>
    Capabilities: [100] Virtual Channel
    Capabilities: [128] Power Budgeting <?>
    Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
    Capabilities: [900] #19
    Kernel driver in use: nvidia
    Kernel modules: nouveau, nvidia
    00: de 10 d1 0f 07 00 10 00 a1 00 00 03 10 00 00 00
    10: 00 00 00 b2 0c 00 00 c0 00 00 00 00 0c 00 00 d0
    20: 00 00 00 00 01 30 00 00 00 00 00 00 aa 17 72 39
    30: 00 00 f8 ff 60 00 00 00 00 00 00 00 00 01 00 00
    40: aa 17 72 39 00 00 00 00 00 00 00 00 00 00 00 00
    50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
    60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
    70: 00 00 00 00 00 00 00 00 10 b4 02 00 e1 8d 2c 01
    80: 10 29 00 00 03 3d 45 01 43 00 82 10 00 00 00 00
    90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
    a0: 00 00 00 00 0e 00 00 00 03 00 01 00 00 00 00 00
    b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00
    c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    /sbin/lspci -d "10b5:*" -v -xxx
    /sbin/lspci -t
    -[0000:00]-+-00.0
    +-01.0-[01]--+-00.0
    | \-00.1
    +-01.1-[02]----00.0
    +-14.0
    +-16.0
    +-1a.0
    +-1b.0
    +-1c.0-[03]----00.0
    +-1c.1-[04]----00.0
    +-1c.3-[05]--+-00.0
    | +-00.2
    | +-00.3
    | \-00.4
    +-1d.0
    +-1f.0
    +-1f.2
    \-1f.3
    /sbin/lspci -nn
    00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
    00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09)
    00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0155] (rev 09)
    00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)
    00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
    00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
    00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
    00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4)
    00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4)
    00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4)
    00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
    00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04)
    00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
    00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
    01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107M [GeForce GT 650M] [10de:0fd1] (rev a1)
    01:00.1 Audio device [0403]: NVIDIA Corporation GK107 HDMI Audio Controller [10de:0e1b] (rev a1)
    02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107M [GeForce GT 650M] [10de:0fd1] (rev a1)
    03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 Gigabit Ethernet [1969:1091] (rev 10)
    04:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 2230 [8086:0888] (rev c4)
    05:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30)
    05:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30)
    05:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2393] (rev 30)
    05:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2394] (rev 30)
    /sbin/lsusb
    Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 003: ID 8087:07da Intel Corp.
    Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 002: ID 04f2:b331 Chicony Electronics Co., Ltd
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Skipping dmidecode output (dmidecode not found)
    /sbin/modinfo nvidia | grep vermagic
    vermagic: 3.14.4-1-ARCH SMP preempt mod_unload modversions
    Scanning kernel log files for NVRM messages:
    /var/log/messages is not readable
    /var/log/kernel.log is not readable
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.14.4-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140507 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014
    [ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000995affff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000995b0000-0x000000009a9affff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009a9b0000-0x000000009efbefff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009efbf000-0x000000009f6befff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009f6bf000-0x000000009f7befff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f7bf000-0x000000009f7fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009f7ff000-0x000000009f7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f800000-0x000000009fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045effffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] e820: update [mem 0x985ad018-0x985d3057] usable ==> usable
    [ 0.000000] e820: update [mem 0x98586018-0x985ac057] usable ==> usable
    [ 0.000000] e820: update [mem 0x98579018-0x98585057] usable ==> usable
    [ 0.000000] extended physical RAM map:
    [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000098579017] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000098579018-0x0000000098585057] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000098585058-0x0000000098586017] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000098586018-0x00000000985ac057] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000985ac058-0x00000000985ad017] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000985ad018-0x00000000985d3057] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000985d3058-0x00000000995affff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000995b0000-0x000000009a9affff] reserved
    [ 0.000000] reserve setup_data: [mem 0x000000009a9b0000-0x000000009efbefff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000009efbf000-0x000000009f6befff] reserved
    [ 0.000000] reserve setup_data: [mem 0x000000009f6bf000-0x000000009f7befff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x000000009f7bf000-0x000000009f7fefff] ACPI data
    [ 0.000000] reserve setup_data: [mem 0x000000009f7ff000-0x000000009f7fffff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000009f800000-0x000000009fffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045effffff] usable
    [ 0.000000] efi: EFI v2.31 by INSYDE Corp.
    [ 0.000000] efi: ACPI=0x9f7fe000 ACPI 2.0=0x9f7fe014 SMBIOS=0x9f6bef98
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
    [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
    [ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
    [ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000080000) (0MB)
    [ 0.000000] efi: mem05: type=3, attr=0xf, range=[0x0000000000080000-0x0000000000082000) (0MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000082000-0x0000000000088000) (0MB)
    [ 0.000000] efi: mem07: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
    [ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f5b000) (15MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000001f5b000-0x000000007f857000) (2008MB)
    [ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007f857000-0x0000000080000000) (7MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x00000000979c0000) (377MB)
    [ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000979c0000-0x00000000979e0000) (0MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000979e0000-0x0000000097e62000) (4MB)
    [ 0.000000] efi: mem15: type=1, attr=0xf, range=[0x0000000097e62000-0x000000009821b000) (3MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000009821b000-0x0000000098579000) (3MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x0000000098579000-0x00000000985d4000) (0MB)
    [ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000985d4000-0x00000000995b0000) (15MB)
    [ 0.000000] efi: mem19: type=0, attr=0xf, range=[0x00000000995b0000-0x000000009a9b0000) (20MB)
    [ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x000000009a9b0000-0x000000009a9b8000) (0MB)
    [ 0.000000] efi: mem21: type=2, attr=0xf, range=[0x000000009a9b8000-0x000000009a9bb000) (0MB)
    [ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x000000009a9bb000-0x000000009a9bc000) (0MB)
    [ 0.000000] efi: mem23: type=2, attr=0xf, range=[0x000000009a9bc000-0x000000009a9bd000) (0MB)
    [ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x000000009a9bd000-0x000000009a9be000) (0MB)
    [ 0.000000] efi: mem25: type=2, attr=0xf, range=[0x000000009a9be000-0x000000009a9bf000) (0MB)
    [ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x000000009a9bf000-0x000000009aba8000) (1MB)
    [ 0.000000] efi: mem27: type=1, attr=0xf, range=[0x000000009aba8000-0x000000009abbf000) (0MB)
    [ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x000000009abbf000-0x000000009af27000) (3MB)
    [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x000000009af27000-0x000000009b063000) (1MB)
    [ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x000000009b063000-0x000000009b064000) (0MB)
    [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x000000009b064000-0x000000009c9f3000) (25MB)
    [ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x000000009c9f3000-0x000000009c9fb000) (0MB)
    [ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x000000009c9fb000-0x000000009ca11000) (0MB)
    [ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x000000009ca11000-0x000000009ca12000) (0MB)
    [ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x000000009ca12000-0x000000009ca1d000) (0MB)
    [ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x000000009ca1d000-0x000000009ca1f000) (0MB)
    [ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x000000009ca1f000-0x000000009ca21000) (0MB)
    [ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x000000009ca21000-0x000000009ca22000) (0MB)
    [ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x000000009ca22000-0x000000009ca45000) (0MB)
    [ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x000000009ca45000-0x000000009ca47000) (0MB)
    [ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x000000009ca47000-0x000000009cd81000) (3MB)
    [ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x000000009cd81000-0x000000009cd82000) (0MB)
    [ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x000000009cd82000-0x000000009cfa7000) (2MB)
    [ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x000000009cfa7000-0x000000009cfa8000) (0MB)
    [ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x000000009cfa8000-0x000000009cfbf000) (0MB)
    [ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x000000009cfbf000-0x000000009cfc5000) (0MB)
    [ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x000000009cfc5000-0x000000009cfd0000) (0MB)
    [ 0.000000] efi: mem48: type=7, attr=0xf, range=[0x000000009cfd0000-0x000000009cfd2000) (0MB)
    [ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x000000009cfd2000-0x000000009cfe9000) (0MB)
    [ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x000000009cfe9000-0x000000009cfea000) (0MB)
    [ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x000000009cfea000-0x000000009ebbf000) (27MB)
    [ 0.000000] efi: mem52: type=7, attr=0xf, range=[0x000000009ebbf000-0x000000009ec3a000) (0MB)
    [ 0.000000] efi: mem53: type=3, attr=0xf, range=[0x000000009ec3a000-0x000000009efbf000) (3MB)
    [ 0.000000] efi: mem54: type=5, attr=0x800000000000000f, range=[0x000000009efbf000-0x000000009f04e000) (0MB)
    [ 0.000000] efi: mem55: type=6, attr=0x800000000000000f, range=[0x000000009f04e000-0x000000009f050000) (0MB)
    [ 0.000000] efi: mem56: type=5, attr=0x800000000000000f, range=[0x000000009f050000-0x000000009f066000) (0MB)
    [ 0.000000] efi: mem57: type=6, attr=0x800000000000000f, range=[0x000000009f066000-0x000000009f067000) (0MB)
    [ 0.000000] efi: mem58: type=5, attr=0x800000000000000f, range=[0x000000009f067000-0x000000009f07f000) (0MB)
    [ 0.000000] efi: mem59: type=6, attr=0x800000000000000f, range=[0x000000009f07f000-0x000000009f080000) (0MB)
    [ 0.000000] efi: mem60: type=5, attr=0x800000000000000f, range=[0x000000009f080000-0x000000009f08b000) (0MB)
    [ 0.000000] efi: mem61: type=6, attr=0x800000000000000f, range=[0x000000009f08b000-0x000000009f08c000) (0MB)
    [ 0.000000] efi: mem62: type=5, attr=0x800000000000000f, range=[0x000000009f08c000-0x000000009f091000) (0MB)
    [ 0.000000] efi: mem63: type=6, attr=0x800000000000000f, range=[0x000000009f091000-0x000000009f092000) (0MB)
    [ 0.000000] efi: mem64: type=5, attr=0x800000000000000f, range=[0x000000009f092000-0x000000009f0a0000) (0MB)
    [ 0.000000] efi: mem65: type=6, attr=0x800000000000000f, range=[0x000000009f0a0000-0x000000009f0a1000) (0MB)
    [ 0.000000] efi: mem66: type=5, attr=0x800000000000000f, range=[0x000000009f0a1000-0x000000009f0f2000) (0MB)
    [ 0.000000] efi: mem67: type=6, attr=0x800000000000000f, range=[0x000000009f0f2000-0x000000009f137000) (0MB)
    [ 0.000000] efi: mem68: type=5, attr=0x800000000000000f, range=[0x000000009f137000-0x000000009f1bf000) (0MB)
    [ 0.000000] efi: mem69: type=6, attr=0x800000000000000f, range=[0x000000009f1bf000-0x000000009f2bf000) (1MB)
    [ 0.000000] efi: mem70: type=0, attr=0xf, range=[0x000000009f2bf000-0x000000009f6bf000) (4MB)
    [ 0.000000] efi: mem71: type=10, attr=0xf, range=[0x000000009f6bf000-0x000000009f7bf000) (1MB)
    [ 0.000000] efi: mem72: type=9, attr=0xf, range=[0x000000009f7bf000-0x000000009f7ff000) (0MB)
    [ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x000000009f7ff000-0x000000009f800000) (0MB)
    [ 0.000000] efi: mem74: type=7, attr=0xf, range=[0x0000000100000000-0x000000045f000000) (13808MB)
    [ 0.000000] efi: mem75: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem76: type=0, attr=0x0, range=[0x000000009f800000-0x00000000a0000000) (8MB)
    [ 0.000000] efi: mem77: type=11, attr=0x8000000000000001, range=[0x00000000f0000000-0x00000000f4000000) (64MB)
    [ 0.000000] efi: mem78: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
    [ 0.000000] efi: mem79: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
    [ 0.000000] efi: mem81: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem82: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem83: type=11, attr=0x8000000000000000, range=[0x00000000ffb80000-0x0000000100000000) (4MB)
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 20193/INVALID, BIOS 6BCN42WW(V2.02) 02/08/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x45f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FE0000000 write-back
    [ 0.000000] 2 base 09F800000 mask FFF800000 uncachable
    [ 0.000000] 3 base 0FF800000 mask FFF800000 write-protect
    [ 0.000000] 4 base 100000000 mask F00000000 write-back
    [ 0.000000] 5 base 200000000 mask E00000000 write-back
    [ 0.000000] 6 base 400000000 mask F80000000 write-back
    [ 0.000000] 7 base 45F000000 mask FFF000000 uncachable
    [ 0.000000] 8 base 460000000 mask FE0000000 uncachable
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
    [ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
    [ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x45ee00000-0x45effffff]
    [ 0.000000] [mem 0x45ee00000-0x45effffff] page 2M
    [ 0.000000] BRK [0x01b3c000, 0x01b3cfff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45edfffff]
    [ 0.000000] [mem 0x45c000000-0x45edfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff]
    [ 0.000000] [mem 0x400000000-0x45bffffff] page 2M
    [ 0.000000] BRK [0x01b3d000, 0x01b3dfff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x995affff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x993fffff] page 2M
    [ 0.000000] [mem 0x99400000-0x995affff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9a9b0000-0x9efbefff]
    [ 0.000000] [mem 0x9a9b0000-0x9a9fffff] page 4k
    [ 0.000000] [mem 0x9aa00000-0x9edfffff] page 2M
    [ 0.000000] [mem 0x9ee00000-0x9efbefff] page 4k
    [ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x9f7ff000-0x9f7fffff]
    [ 0.000000] [mem 0x9f7ff000-0x9f7fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
    [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x7f857000-0x7fffffff]
    [ 0.000000] ACPI: RSDP 000000009f7fe014 000024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 000000009f7fe210 0000AC (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP 000000009f7fa000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT 000000009f7ed000 009D93 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS 000000009f7bb000 000040
    [ 0.000000] ACPI: SLIC 000000009f7fd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: UEFI 000000009f7fc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! 000000009f7fb000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET 000000009f7f9000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC 000000009f7f8000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG 000000009f7f7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009f7ec000 0006FE (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 000000009f7ea000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASPT 000000009f7e5000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DBGP 000000009f7e4000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT 000000009f7e2000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MSDM 000000009f7e1000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009f7e0000 000926 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009f7df000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009f7dc000 0010F1 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BGRT 000000009f7de000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045effffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x45effffff]
    [ 0.000000] NODE_DATA [mem 0x45efea000-0x45efeefff]
    [ 0.000000] [ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044e600000-ffff88045e5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x45effffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00087fff]
    [ 0.000000] node 0: [mem 0x00100000-0x995affff]
    [ 0.000000] node 0: [mem 0x9a9b0000-0x9efbefff]
    [ 0.000000] node 0: [mem 0x9f7ff000-0x9f7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x45effffff]
    [ 0.000000] On node 0 totalpages: 4180807
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 24 pages reserved
    [ 0.000000] DMA zone: 3975 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10031 pages used for memmap
    [ 0.000000] DMA32 zone: 641984 pages, LIFO batch:31
    [ 0.000000] Normal zone: 55232 pages used for memmap
    [ 0.000000] Normal zone: 3534848 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x98579000-0x98579fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x98585000-0x98585fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x98586000-0x98586fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x985ac000-0x985acfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x985ad000-0x985adfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x985d3000-0x985d3fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x995b0000-0x9a9affff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9efbf000-0x9f6befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f6bf000-0x9f7befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f7bf000-0x9f7fefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f800000-0x9fffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
    [ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88045ec00000 s87040 r8192 d23552 u262144
    [ 0.000000] pcpu-alloc: s87040 r8192 d23552 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4115456
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 16292016K/16723228K available (5230K kernel code, 857K rwdata, 1632K rodata, 1120K init, 1288K bss, 431212K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 67108864 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2394.558 MHz processor
    [ 0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.66 BogoMIPS (lpj=7981860)
    [ 0.000037] pid_max: default: 32768 minimum: 301
    [ 0.000044] ACPI: Core revision 20131218
    [ 0.006081] ACPI: All ACPI Tables successfully acquired
    [ 0.030009] Security Framework initialized
    [ 0.030016] Yama: becoming mindful.
    [ 0.031004] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.035068] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.036876] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.036893] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.037118] Initializing cgroup subsys memory
    [ 0.037123] Initializing cgroup subsys devices
    [ 0.037125] Initializing cgroup subsys freezer
    [ 0.037126] Initializing cgroup subsys net_cls
    [ 0.037127] Initializing cgroup subsys blkio
    [ 0.037150] CPU: Physical Processor ID: 0
    [ 0.037151] CPU: Processor Core ID: 0
    [ 0.037156] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.037529] mce: CPU supports 9 MCE banks
    [ 0.037542] CPU0: Thermal monitoring enabled (TM1)
    [ 0.037553] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    tlb_flushall_shift: 2
    [ 0.037649] Freeing SMP alternatives memory: 20K (ffffffff819f0000 - ffffffff819f5000)
    [ 0.041198] ftrace: allocating 20029 entries in 79 pages
    [ 0.050996] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.084028] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.084036] TSC deadline timer enabled
    [ 0.084045] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.084051] ... version: 3
    [ 0.084052] ... bit width: 48
    [ 0.084053] ... generic registers: 4
    [ 0.084054] ... value mask: 0000ffffffffffff
    [ 0.084055] ... max period: 0000ffffffffffff
    [ 0.084056] ... fixed-purpose events: 3
    [ 0.084057] ... event mask: 000000070000000f
    [ 0.110826] x86: Booting SMP configuration:
    [ 0.110828] .... node #0, CPUs: #1
    [ 0.124613] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.131276] #2 #3 #4 #5 #6 #7
    [ 0.246855] x86: Booted up 1 node, 8 CPUs
    [ 0.246859] smpboot: Total of 8 processors activated (38328.30 BogoMIPS)
    [ 0.254157] devtmpfs: initialized
    [ 0.257424] PM: Registering ACPI NVS region [mem 0x9f6bf000-0x9f7befff] (1048576 bytes)
    [ 0.258171] pinctrl core: initialized pinctrl subsystem
    [ 0.258207] RTC time: 19:11:33, date: 05/31/14
    [ 0.258239] NET: Registered protocol family 16
    [ 0.258316] cpuidle: using governor ladder
    [ 0.258318] cpuidle: using governor menu
    [ 0.258361] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.258362] ACPI: bus type PCI registered
    [ 0.258364] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.258425] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.258428] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.266014] PCI: Using configuration type 1 for base access
    [ 0.266838] bio: create slab <bio-0> at 0
    [ 0.266930] ACPI: Added _OSI(Module Device)
    [ 0.266932] ACPI: Added _OSI(Processor Device)
    [ 0.266933] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.266934] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.269731] ACPI: Executed 1 b

    Trilby wrote:
    zacariaz wrote:* b u m p *
    Do not do this.
    If you want help, start providing relevant information beyond "it don't work".  You say you followed the instructions ... which instructions?  What steps did you take?  It is clear from your xorg.conf that you did not follow the only instructions I could find in the archlinux wiki.  Follow those instructions, and post the output of the relevant diagnostic or information-gathering steps included there.
    Also if you have information which could be useful - such as which mobile devices/cards allegedly don't work - then share that.  Don't keep us in the dark.
    I should think that it's quite obvious that I've followed the wiki instruction, which basically is one line in xorg, as is the official nvidia instructions.
    This is most likely a problem related specificlally to the gt 650m and/or the lenovo ideapad y500 (and perhaps derivatives thereof).
    I do not believe I've left any information out.
    Of course if I've done something wrong, I apologize and will do my best to avoid it in the future. As for the rest, I'd very much like to know which instructions I did not follow, as I've done all that I can think of and telling me that I haven't is hardly useful. As far as I aware, the wiki instructs you to  ad two line in the xorg.conf, which I've done. I will of course read it again, hoping to figure out what I've apparently missed, though I've read it so many times already that I don't expect to learn anything.

  • Will Tablet case with combined keyboard work on Lenovo Ideapad A1 07

    Hi All,
    Sorry if anyone has asked before but couldn't find specific.
    My wife has recently purchased a Lenovo Ideapad A1 07 for its size,  a friend who has a small android tablet also recommended to her, to buy a tablet case with combined keyboard with USB connection from amazon. When received the connection obviously doesn't fit, so I started searching around web for an adapter for it, but I’m seeing conflicting info that the ideapad either does/doesn't support USB data transfer connection point, so before buying an adapter what is correct!.
    Can anyone throw some light onto whether Lenovo will update the firmware to be able to use USB at any time or has anyone have a work around. Any help and advice to get this keyboard working would be grateful as the tablet is a great little device for her.
    Gazzataf  

    If you are patient, go through the reviews of a specific USB keyboard that was suggested as an addition for Lenovo A1 by Amazon: You will see that even though users have tried different cables and adapters, no A1 user has managed to get this working on his tablet.
    This issue may be solved by a future upgrade (if any), which will enable the USB OTG feature of the microUSB port of the A1 tablet. Until then, nothing can be done in order to have any USB device identified and working with A1. I really hope that I make a mistake here and that someone will come up with a working soultion for this issue ...

  • Sudden slow performanc​e Lenovo IdeaPad G4070 (59415695)

    Hello guys! I need help... My Lenovo IdeaPad G4070 (59415695) is suddenly on slow performance when in multitasking mode such as opening simultaneously NBA2k14, winamp, & adobe photoshop cs5. It performs or runs smoothly then afterwards it become on slow performance but this occurs randomly..
    Any idea what's the problem with this..thanks
    here is my laptop specs:
    Processors :  4th Gen Intel® Core™ i5-4200U (2.60GHz 1600MHz 3MB)
    Operating System :  Windows 8.1 64
    Graphics :  ATI JET LE R5 M230 With 2GB Video Card DDR3L VRAM
    Memory :  4GB DDR3L 1600 MHz, 2 SODIMM slots
    Hard Disk Drive :  500B HDD storage 5400RPM

    We have the same problem...we need help... 

  • Sudden slow performance Lenovo IdeaPad G4070 (59415695)

    Hello guys! I need help... My Lenovo IdeaPad G4070 (59415695) is suddenly on slow performance when in multitasking mode such as opening simultaneously NBA2k14, winamp, & adobe photoshop cs5. It performs or runs smoothly then afterwards it become on slow performance but this occurs randomly.. Any idea what's the problem with this..thanks here is my laptop specs:Processors :  4th Gen Intel® Core™ i5-4200U (2.60GHz 1600MHz 3MB)
    Operating System :  Windows 8.1 64
    Graphics :  ATI JET LE R5 M230 With 2GB Video Card DDR3L VRAM
    Memory :  4GB DDR3L 1600 MHz, 2 SODIMM slots
    Hard Disk Drive :  500B HDD storage 5400RPM

    We have the same problem...we need help... 

Maybe you are looking for