Lenovo ideapad mix 10 issue
Hello, I have lenovo ideapad mix 10. I've instaled windows 10 on it, but it is dead. When I pulg my charger the tablet does not dispay nothing ( the charger is fine, I've tested it). I can't boot to bios, all I see is black screen, when I press windows button the tablet is vibrating. I've hold down vol down and power button and I see a massage "Lenovo bios crisis. Recovery begin to flash. Press ENTER to start".when I press enter I see a massage "Lenovo bios crisis. Recovery bios fetch failed" and then the screen goes black .
i have been unable to download Windows 10 to my Lenovo G700 laptop,as the Windows Get 10 site states"Critical hardware components made for your PC by Intel don't have drivers for Windows10 yet". does anybody know whether this problem will be resolved. My wife's older Lenovo laptop installed Windows 10 without any problem.
Similar Messages
-
[SOLVED]lenovo ideapad u350 backlight issue
Hi, as the thread title says i have an issue with the backlight on my lenovo ideapad u350.
/sys/class/backlight/ is empty so i cant use xbacklight.....
I allready added acpi_osi=linux and acpi_backlight=vendor to my menu.lst, but still /sys/class/backlight is empty....
but I can set the backlight with sudo setpci -s 00:02.0 F4.B=xx , does that mean i just dont have the right module loaded?
what do I need to do, to get the necesyary stuff in /sys/class/backlight so i can use xbacklight?
havent found anything with google or in forum/wiki besides people using setpci -s 00:02.0 F4.B=xx , or people having
backlight dimming working out of the box.
Last edited by bithoernchen (2011-09-22 20:30:04)thank you very much that did the trick.
kernel.org is down so i had to edit the PKGBUILD, but now everything works. -
Lenovo Ideapad Yoga 13 Recovery Issues
I'm very disappointed from Lenovo for producing Laptop without complete recovery solution.
I mistakely formated the hard drive of Lenovo IdeaPad Yoga 13, so I lost the recovery, so I called Contact Centre and they pointed me to Jumbo Electronics Company in Abu Dhabi of which are aotherized to do services for Lenovo. I went to them to save time, and get my laptop back to the initial state of which I bought, instead of getting the original state of how I bought the laptop which was:
1. Windows 8.1 Single Language.
2. All Drivers are Installed.
3. At Start-Up, I should be getting to put in my sync account while it's preparing windows for first use.
I got the following:
1. Windows 8 Single Language installed. (Not 8.1)
2. Drivers are installed.
3. Recovery is supposed to be back.
4. Local User Account "Lenovo" was created.
OK, Skip it, it's fine. I thought about trying to do recovery to make sure of the recovery working before I do back up of it, here is what I got:
1. Windows 8 Single Language Installed (Not 8.1)
2. Not all drivers are installed (For ex. Wireless Driver which is very important for this laptop since no LAN no other connection except wireless)
So I thought they gave me the non-original recovery because of the missing drivers which was not believable to me.
I contacted "Service Centre for IdeaPad Within UAE" ended up telling me that that was the original copy of the Recovery and Yes, it does not Install the Wireless Drivers! And that he himself tried it at his side and confirms it!
Can somebody explain to me how come that I paid for recovery to recover the laptop to the initial state and I did not get the real initial state of the laptop?
How come at the service centre they don't tell me "Warning" about the wireless and that I have to download and back-up the drivers before doing the recovery of the laptop?
How come actually Lenovo produces a laptop with recovery missing drivers?
VERY DISAPPOINTING! VERY ANGRY AT LENOVO! If I CAN RETURN THE LAPTOP AND BUY FROM DIFFERENT BRAND, I WOULD DO SO!
BIOS FEATURES ARE POOR NO BOOTING FROM SD CARD AVAILABLE!
WIRELESS IS POOR IN QUALITY WHILE ITS THE ONLY AND MAIN CONNECTION FOR THE LAPTOP!
Simply you are SELLING half Quality Products, WORST RECOVERY SOLUTIONS EVER! AND EXPENSIVE FOR NOTHING!
VERY DISAPPOINTED AT LENOVO PRODUCTS FROM THE FIRST IMPRESSION OF LENOVO IDEAPAD YOGA 13!I have the same problem. If I continually power cycle the machine (either via CTRL-ALT-DEL or the switch) combined with either plugging or unplugging it from power I can eventually get it to boot up. No idea how to fix it yet. I noticed that the fan doesnt seem to be running when it doesn't boot and it is almost like it has to "warm up" or something before it will boot to the hard drive. Any fixes would be greatly appreciated.
-
Problem with sound in lenovo ideapad u 350
I have a problem with the sound in a lenovo ideapad U 350. When i am speeking to skype or when am listening music from youtube the sound is going in mute but the sound icon in the mixer is going up and down with the green colour like the sound is on...can someone help me?
@unick,
Have you tried doing a factory restore? Did you have this issue when you first have the laptop? I understand you wrote that this issue came after 2 weeks? Is there any antivirus software which you have installed? Appreciate if you could try a factory recovery first if you haven't done so.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD -
[concluded] Enabling SLI (Lenovo Ideapad y500 / dual gt 650m)
final edit:
Apparently there is no support for sli on mobile nvidia gpu. Thank you ever so much Nvidia, you willf orever hold a special place in my heart..
I've miracously gotten everything else to work. Only thing left is enabling sli, which I haven't been able to.
As far as I know, I've follow the instruction to the letter, but all I get i a black screen and a log with no particular useful information that I can find:
[ 13.106]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 13.106] X Protocol Version 11, Revision 0
[ 13.106] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 13.106] Current Operating System: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64
[ 13.106] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 13.106] Build Date: 14 April 2014 08:39:09AM
[ 13.106]
[ 13.106] Current version of pixman: 0.32.4
[ 13.106] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.106] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.107] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 31 17:50:00 2014
[ 13.108] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.108] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.109] (==) ServerLayout "Layout0"
[ 13.109] (**) |-->Screen "Screen0" (0)
[ 13.109] (**) | |-->Monitor "Monitor0"
[ 13.110] (**) | |-->Device "Device0"
[ 13.110] (**) |-->Input Device "Keyboard0"
[ 13.110] (**) |-->Input Device "Mouse0"
[ 13.110] (**) Option "BlankTime" "0"
[ 13.110] (==) Automatically adding devices
[ 13.110] (==) Automatically enabling devices
[ 13.110] (==) Automatically adding GPU devices
[ 13.112] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 13.112] Entry deleted from font path.
[ 13.113] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.113] Entry deleted from font path.
[ 13.113] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.114] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.114] Entry deleted from font path.
[ 13.114] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.114] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 13.114] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.114] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.114] (WW) Disabling Keyboard0
[ 13.114] (WW) Disabling Mouse0
[ 13.114] (II) Loader magic: 0x804c80
[ 13.114] (II) Module ABI versions:
[ 13.114] X.Org ANSI C Emulation: 0.4
[ 13.114] X.Org Video Driver: 15.0
[ 13.114] X.Org XInput driver : 20.0
[ 13.114] X.Org Server Extension : 8.0
[ 13.114] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.114] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 13.117] (--) PCI:*(0:1:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 13.117] (--) PCI: (0:2:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 13.117] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.117] Initializing built-in extension Generic Event Extension
[ 13.117] Initializing built-in extension SHAPE
[ 13.117] Initializing built-in extension MIT-SHM
[ 13.117] Initializing built-in extension XInputExtension
[ 13.117] Initializing built-in extension XTEST
[ 13.117] Initializing built-in extension BIG-REQUESTS
[ 13.117] Initializing built-in extension SYNC
[ 13.117] Initializing built-in extension XKEYBOARD
[ 13.118] Initializing built-in extension XC-MISC
[ 13.118] Initializing built-in extension SECURITY
[ 13.118] Initializing built-in extension XINERAMA
[ 13.118] Initializing built-in extension XFIXES
[ 13.118] Initializing built-in extension RENDER
[ 13.118] Initializing built-in extension RANDR
[ 13.118] Initializing built-in extension COMPOSITE
[ 13.118] Initializing built-in extension DAMAGE
[ 13.118] Initializing built-in extension MIT-SCREEN-SAVER
[ 13.118] Initializing built-in extension DOUBLE-BUFFER
[ 13.118] Initializing built-in extension RECORD
[ 13.118] Initializing built-in extension DPMS
[ 13.118] Initializing built-in extension Present
[ 13.118] Initializing built-in extension DRI3
[ 13.118] Initializing built-in extension X-Resource
[ 13.118] Initializing built-in extension XVideo
[ 13.118] Initializing built-in extension XVideo-MotionCompensation
[ 13.118] Initializing built-in extension XFree86-VidModeExtension
[ 13.118] Initializing built-in extension XFree86-DGA
[ 13.119] Initializing built-in extension XFree86-DRI
[ 13.119] Initializing built-in extension DRI2
[ 13.119] (II) LoadModule: "glx"
[ 13.121] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.212] (II) Module glx: vendor="NVIDIA Corporation"
[ 13.212] compiled for 4.0.2, module version = 1.0.0
[ 13.212] Module class: X.Org Server Extension
[ 13.212] (II) NVIDIA GLX Module 337.19 Tue Apr 29 19:48:33 PDT 2014
[ 13.212] Loading extension GLX
[ 13.212] (II) LoadModule: "nvidia"
[ 13.212] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 13.219] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 13.219] compiled for 4.0.2, module version = 1.0.0
[ 13.219] Module class: X.Org Video Driver
[ 13.220] (II) NVIDIA dlloader X Driver 337.19 Tue Apr 29 19:22:36 PDT 2014
[ 13.220] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 13.220] (++) using VT number 1
[ 13.221] (II) Loading sub module "fb"
[ 13.221] (II) LoadModule: "fb"
[ 13.221] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.222] (II) Module fb: vendor="X.Org Foundation"
[ 13.222] compiled for 1.15.1, module version = 1.0.0
[ 13.222] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.222] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 13.222] (II) Loading sub module "wfb"
[ 13.222] (II) LoadModule: "wfb"
[ 13.222] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 13.223] (II) Module wfb: vendor="X.Org Foundation"
[ 13.223] compiled for 1.15.1, module version = 1.0.0
[ 13.223] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.223] (II) Loading sub module "ramdac"
[ 13.224] (II) LoadModule: "ramdac"
[ 13.224] (II) Module "ramdac" already built-in
[ 13.237] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 13.237] (==) NVIDIA(0): RGB weight 888
[ 13.237] (==) NVIDIA(0): Default visual is TrueColor
[ 13.237] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.238] (**) NVIDIA(0): Option "NoLogo" "True"
[ 13.238] (**) NVIDIA(0): Option "SLI" "Auto"
[ 13.238] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes"
[ 13.238] (**) NVIDIA(0): NVIDIA SLI auto-select rendering option.
[ 13.238] (**) NVIDIA(0): Option "UseEDID" "FALSE"
[ 13.238] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
[ 13.238] (**) NVIDIA(0): Enabling 2D acceleration
[ 13.238] (**) NVIDIA(0): Ignoring EDIDs
[ 17.131] (WW) NVIDIA(GPU-0): Failed to initialize the SLI configuration for the NVIDIA
[ 17.131] (WW) NVIDIA(GPU-0): graphics device PCI:1:0:0. Please see Chapter 29:
[ 17.131] (WW) NVIDIA(GPU-0): Configuring SLI and Multi-GPU FrameRendering in the README
[ 17.131] (WW) NVIDIA(GPU-0): for troubleshooting suggestions.
In the end, all that I can learn from this is that stuff don't work, not why or how to fix it. A bit annoying to be blunt.
I've been googling around for answers, but the closest thing I've come to an answer, and I do hope it isn't true, is that sli om mobile nvidia gpu is not supported under linux. I've been unable to confirm this.
I do hope you can help.
Best regards.
edit:
Just for kicks, here's my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.19 (buildmeister@swio-display-x64-rhel04-03) Tue Apr 29 20:34:50 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "BlankTime" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 66.5 - 66.5
VertRefresh 59.9
ModeLine "1920x1080" 138.500 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync
Option "DPMS"
EndSection
Section "Device"
BusID "PCI:1:0:0"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
Option "NoLogo" "True"
Option "ModeValidation" "AllowNonEdidModes"
Option "UseEDID" "FALSE"
Option "SLI" "Auto"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Ya, it's a mess, but nothing particular wrong with is that I can see.
edit2:
Just in case some information is lagging, here is the nvidia compiled bug report in it's entirety:
Start of NVIDIA bug report log file. Please include this file, along
with a detailed description of your problem, when reporting a graphics
driver bug via the NVIDIA Linux forum (see devtalk.nvidia.com)
or by sending email to '[email protected]'.
nvidia-bug-report.sh Version: 17818519
Date: lør maj 31 21:11:50 CEST 2014
uname: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64 GNU/Linux
command line flags:
*** /etc/issue
*** ls: -rw-r--r-- 1 root root 20 2013-05-31 20:40:23.000000000 +0200 /etc/issue
Arch Linux \r (\l)
*** /var/log/nvidia-installer.log does not exist
*** /var/log/Xorg.0.log
*** ls: -rw-r--r-- 1 root zacariaz 7488 2014-05-31 21:10:38.492892729 +0200 /var/log/Xorg.0.log
[ 11.874]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 11.874] X Protocol Version 11, Revision 0
[ 11.874] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 11.875] Current Operating System: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64
[ 11.875] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 11.875] Build Date: 14 April 2014 08:39:09AM
[ 11.875]
[ 11.875] Current version of pixman: 0.32.4
[ 11.875] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.875] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.875] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 31 21:10:34 2014
[ 11.877] (==) Using config file: "/etc/X11/xorg.conf"
[ 11.877] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.878] (==) ServerLayout "Layout0"
[ 11.878] (**) |-->Screen "Screen0" (0)
[ 11.878] (**) | |-->Monitor "Monitor0"
[ 11.878] (**) | |-->Device "Device0"
[ 11.878] (**) |-->Input Device "Keyboard0"
[ 11.878] (**) |-->Input Device "Mouse0"
[ 11.878] (**) Option "BlankTime" "0"
[ 11.878] (==) Automatically adding devices
[ 11.878] (==) Automatically enabling devices
[ 11.878] (==) Automatically adding GPU devices
[ 11.881] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11.881] Entry deleted from font path.
[ 11.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 11.882] Entry deleted from font path.
[ 11.882] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 11.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 11.882] Entry deleted from font path.
[ 11.882] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 11.882] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 11.882] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.882] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 11.882] (WW) Disabling Keyboard0
[ 11.882] (WW) Disabling Mouse0
[ 11.882] (II) Loader magic: 0x804c80
[ 11.882] (II) Module ABI versions:
[ 11.882] X.Org ANSI C Emulation: 0.4
[ 11.882] X.Org Video Driver: 15.0
[ 11.882] X.Org XInput driver : 20.0
[ 11.882] X.Org Server Extension : 8.0
[ 11.883] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11.883] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 11.885] (--) PCI:*(0:1:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 11.885] (--) PCI: (0:2:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 11.885] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.886] Initializing built-in extension Generic Event Extension
[ 11.886] Initializing built-in extension SHAPE
[ 11.886] Initializing built-in extension MIT-SHM
[ 11.886] Initializing built-in extension XInputExtension
[ 11.886] Initializing built-in extension XTEST
[ 11.886] Initializing built-in extension BIG-REQUESTS
[ 11.886] Initializing built-in extension SYNC
[ 11.886] Initializing built-in extension XKEYBOARD
[ 11.886] Initializing built-in extension XC-MISC
[ 11.886] Initializing built-in extension SECURITY
[ 11.886] Initializing built-in extension XINERAMA
[ 11.886] Initializing built-in extension XFIXES
[ 11.886] Initializing built-in extension RENDER
[ 11.886] Initializing built-in extension RANDR
[ 11.886] Initializing built-in extension COMPOSITE
[ 11.886] Initializing built-in extension DAMAGE
[ 11.886] Initializing built-in extension MIT-SCREEN-SAVER
[ 11.886] Initializing built-in extension DOUBLE-BUFFER
[ 11.887] Initializing built-in extension RECORD
[ 11.887] Initializing built-in extension DPMS
[ 11.887] Initializing built-in extension Present
[ 11.887] Initializing built-in extension DRI3
[ 11.887] Initializing built-in extension X-Resource
[ 11.887] Initializing built-in extension XVideo
[ 11.887] Initializing built-in extension XVideo-MotionCompensation
[ 11.887] Initializing built-in extension XFree86-VidModeExtension
[ 11.887] Initializing built-in extension XFree86-DGA
[ 11.887] Initializing built-in extension XFree86-DRI
[ 11.887] Initializing built-in extension DRI2
[ 11.887] (II) LoadModule: "glx"
[ 11.889] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.978] (II) Module glx: vendor="NVIDIA Corporation"
[ 11.978] compiled for 4.0.2, module version = 1.0.0
[ 11.978] Module class: X.Org Server Extension
[ 11.978] (II) NVIDIA GLX Module 337.19 Tue Apr 29 19:48:33 PDT 2014
[ 11.979] Loading extension GLX
[ 11.979] (II) LoadModule: "nvidia"
[ 11.979] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 11.986] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11.986] compiled for 4.0.2, module version = 1.0.0
[ 11.986] Module class: X.Org Video Driver
[ 11.986] (II) NVIDIA dlloader X Driver 337.19 Tue Apr 29 19:22:36 PDT 2014
[ 11.986] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11.987] (++) using VT number 1
[ 11.988] (II) Loading sub module "fb"
[ 11.988] (II) LoadModule: "fb"
[ 11.988] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.989] (II) Module fb: vendor="X.Org Foundation"
[ 11.989] compiled for 1.15.1, module version = 1.0.0
[ 11.989] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.989] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 11.989] (II) Loading sub module "wfb"
[ 11.989] (II) LoadModule: "wfb"
[ 11.989] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11.990] (II) Module wfb: vendor="X.Org Foundation"
[ 11.990] compiled for 1.15.1, module version = 1.0.0
[ 11.990] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.990] (II) Loading sub module "ramdac"
[ 11.990] (II) LoadModule: "ramdac"
[ 11.990] (II) Module "ramdac" already built-in
[ 12.004] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 12.004] (==) NVIDIA(0): RGB weight 888
[ 12.004] (==) NVIDIA(0): Default visual is TrueColor
[ 12.004] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.004] (**) NVIDIA(0): Option "NoLogo" "True"
[ 12.004] (**) NVIDIA(0): Option "SLI" "Auto"
[ 12.004] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes"
[ 12.004] (**) NVIDIA(0): NVIDIA SLI auto-select rendering option.
[ 12.004] (**) NVIDIA(0): Option "UseEDID" "FALSE"
[ 12.004] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
[ 12.004] (**) NVIDIA(0): Enabling 2D acceleration
[ 12.004] (**) NVIDIA(0): Ignoring EDIDs
[ 15.847] (WW) NVIDIA(GPU-0): Failed to initialize the SLI configuration for the NVIDIA
[ 15.847] (WW) NVIDIA(GPU-0): graphics device PCI:1:0:0. Please see Chapter 29:
[ 15.847] (WW) NVIDIA(GPU-0): Configuring SLI and Multi-GPU FrameRendering in the README
[ 15.847] (WW) NVIDIA(GPU-0): for troubleshooting suggestions.
*** /etc/X11/xorg.conf
*** ls: -rw-r--r-- 1 root root 1733 2014-05-31 21:10:12.876322985 +0200 /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.19 (buildmeister@swio-display-x64-rhel04-03) Tue Apr 29 20:34:50 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "BlankTime" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 66.5 - 66.5
VertRefresh 59.9
ModeLine "1920x1080" 138.500 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync
Option "DPMS"
EndSection
Section "Device"
BusID "PCI:1:0:0"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
Option "NoLogo" "True"
Option "ModeValidation" "AllowNonEdidModes"
Option "UseEDID" "FALSE"
Option "SLI" "Auto"
SubSection "Display"
Depth 24
EndSubSection
EndSection
*** /etc/X11/xorg.conf.d/10-evdev.conf
*** ls: -rw-r--r-- 1 root root 1099 2014-04-14 10:40:04.000000000 +0200 /etc/X11/xorg.conf.d/10-evdev.conf
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
*** /etc/X11/xorg.conf.d/10-keyboard.conf
*** ls: -rw-r--r-- 1 root root 201 2014-05-07 20:02:13.920335503 +0200 /etc/X11/xorg.conf.d/10-keyboard.conf
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "dk"
Option "XkbModel" "pc104"
Option "XkbVariant" "qwerty"
EndSection
*** /etc/X11/xorg.conf.d/10-quirks.conf
*** ls: -rw-r--r-- 1 root root 377 2014-04-14 10:40:06.000000000 +0200 /etc/X11/xorg.conf.d/10-quirks.conf
# Collection of quirks and blacklist/whitelists for specific devices.
# Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
# http://bugs.freedesktop.org/show_bug.cgi?id=22442
Section "InputClass"
Identifier "ThinkPad HDAPS accelerometer blacklist"
MatchProduct "ThinkPad HDAPS accelerometer data"
Option "Ignore" "on"
EndSection
*** /home/zacariaz/.nvidia-settings-rc
*** ls: -rw-r--r-- 1 zacariaz users 1982 2014-05-31 20:34:36.266975242 +0200 /home/zacariaz/.nvidia-settings-rc
# /home/zacariaz/.nvidia-settings-rc
# Configuration file for nvidia-settings - the NVIDIA X Server Settings utility
# Generated on Sat May 31 20:34:36 2014
# ConfigProperties:
RcFileLocale = C
ToolTips = Yes
DisplayStatusBar = Yes
SliderTextEntries = Yes
IncludeDisplayNameInConfigFile = No
ShowQuitDialog = Yes
UpdateRulesOnProfileNameChange = Yes
Timer = PowerMizer_Monitor_(GPU_1),Yes,1000
Timer = Thermal_Monitor_(GPU_1),Yes,1000
Timer = Memory_Used_(GPU_1),Yes,3000
Timer = Memory_Used_(GPU_0),Yes,3000
Timer = Thermal_Monitor_(GPU_0),Yes,1000
Timer = PowerMizer_Monitor_(GPU_0),Yes,1000
# Attributes:
0/SyncToVBlank=1
0/LogAniso=0
0/FSAA=0
0/TextureSharpen=0
0/TextureClamping=1
0/FXAA=0
0/AllowFlipping=1
0/FSAAAppControlled=1
0/LogAnisoAppControlled=1
0/OpenGLImageSettings=3
0/FSAAAppEnhanced=0
0/XVideoSyncToDisplayID=VGA-0
[DPY:VGA-0]/Dithering=0
[DPY:VGA-0]/DitheringMode=0
[DPY:VGA-0]/DitheringDepth=0
[DPY:VGA-0]/SynchronousPaletteUpdates=0
[DPY:LVDS-0]/Dithering=0
[DPY:LVDS-0]/DitheringMode=0
[DPY:LVDS-0]/DitheringDepth=0
[DPY:LVDS-0]/SynchronousPaletteUpdates=0
[DPY:HDMI-0]/Dithering=0
[DPY:HDMI-0]/DitheringMode=0
[DPY:HDMI-0]/DitheringDepth=0
[DPY:HDMI-0]/SynchronousPaletteUpdates=0
[DPY:VGA-0]/Dithering=0
[DPY:VGA-0]/DitheringMode=0
[DPY:VGA-0]/DitheringDepth=0
[DPY:VGA-0]/SynchronousPaletteUpdates=0
[DPY:LVDS-0]/RedBrightness=0.000000
[DPY:LVDS-0]/GreenBrightness=0.000000
[DPY:LVDS-0]/BlueBrightness=0.000000
[DPY:LVDS-0]/RedContrast=0.000000
[DPY:LVDS-0]/GreenContrast=0.000000
[DPY:LVDS-0]/BlueContrast=0.000000
[DPY:LVDS-0]/RedGamma=1.000000
[DPY:LVDS-0]/GreenGamma=1.000000
[DPY:LVDS-0]/BlueGamma=1.000000
[DPY:LVDS-0]/Dithering=0
[DPY:LVDS-0]/DitheringMode=0
[DPY:LVDS-0]/DitheringDepth=0
[DPY:LVDS-0]/DigitalVibrance=0
[DPY:LVDS-0]/ColorSpace=0
[DPY:LVDS-0]/ColorRange=0
[DPY:LVDS-0]/SynchronousPaletteUpdates=0
[DPY:HDMI-0]/Dithering=0
[DPY:HDMI-0]/DitheringMode=0
[DPY:HDMI-0]/DitheringDepth=0
[DPY:HDMI-0]/SynchronousPaletteUpdates=0
*** /usr/share/nvidia/nvidia-application-profiles-337.19-rc
*** ls: -rw-r--r-- 1 root root 2310 2014-05-20 14:28:33.000000000 +0200 /usr/share/nvidia/nvidia-application-profiles-337.19-rc
# Application profiles for the NVIDIA Linux graphics driver, version 337.19
# Last modified: Tue Apr 29 19:51:54 PDT 2014
# These profiles were provided by NVIDIA and should not be modified. If you
# wish to change the defaults provided here, you can override them by creating
# custom rules in /etc/nvidia/nvidia-application-profiles-rc (which will apply
# system-wide) or, for a given user, $HOME/.nv/nvidia-application-profiles-rc
# (which will apply to that particular user). See the "APPLICATION PROFILE
# SEARCH PATH" section of the NVIDIA Linux Graphics Driver README for more
# information.
"profiles" : [
"name" : "NonConformantBlitFramebufferScissor",
"settings" : [ "GLConformantBlitFramebufferScissor", false ]
"name" : "CL1C",
"settings" : [ "0x528ab3", 1 ]
"name" : "FA0",
"settings" : [ "10572898", 0 ]
"name" : "ExactGLESVersion",
"settings" : [ "ForceRequestedESVersion", 1 ]
"name" : "BGTE",
"settings" : [ "GLAppReturnOnlyBasicGlslType", 1 ]
"rules" : [
# Work around GNOME bug 690451 (see
# https://bugzilla.gnome.org/show_bug.cgi?id=690451)
"pattern" : {
"feature" : "dso",
"matches" : "libcogl.so"
"profile" : "NonConformantBlitFramebufferScissor"
{ "pattern" : "Maya2014", "profile" : "CL1C" },
{ "pattern" : "xsi", "profile" : "CL1C" },
{ "pattern" : "HoudiniFX", "profile" : "CL1C" },
{ "pattern" : "katana", "profile" : "CL1C" },
{ "pattern" : "Autodesk Mudbox 2014 64-bit", "profile" : "CL1C" },
{ "pattern" : "octane", "profile" : "CL1C" },
{ "pattern" : "Fusion64_6.4", "profile" : "CL1C" },
{ "pattern" : "Nuke7.0", "profile" : "CL1C" },
{ "pattern" : "vray.exe", "profile" : "CL1C" },
{ "pattern" : "vray.bin", "profile" : "CL1C" },
{ "pattern" : "kwin_gles", "profile" : "FA0" },
{ "pattern" : "kwin_gles", "profile" : "ExactGLESVersion" },
{ "pattern" : "heaven_x86", "profile" : "BGTE" },
{ "pattern" : "heaven_x64", "profile" : "BGTE" }
Skipping ldd output (glxinfo not found)
/sbin/lspci -d "10de:*" -v -xxx
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 3972
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at b3000000 (32-bit, non-prefetchable) [size=16M]
Memory at a0000000 (64-bit, prefetchable) [size=256M]
Memory at b0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 4000 [size=128]
Expansion ROM at b4080000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900] #19
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
00: de 10 d1 0f 07 00 10 00 a1 00 00 03 10 00 80 00
10: 00 00 00 b3 0c 00 00 a0 00 00 00 00 0c 00 00 b0
20: 00 00 00 00 01 40 00 00 00 00 00 00 aa 17 72 39
30: 00 00 f8 ff 60 00 00 00 00 00 00 00 00 01 00 00
40: aa 17 72 39 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 b4 02 00 e1 8d 2c 01
80: 30 29 00 00 03 3d 45 00 43 00 81 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
a0: 00 00 00 00 0e 00 00 00 03 00 01 00 00 00 00 00
b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:00.1 Audio device: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)
Subsystem: Lenovo Device 3977
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at b4000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00: de 10 1b 0e 06 00 10 00 a1 00 03 04 10 00 80 00
10: 00 00 00 b4 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 77 39
30: 00 00 00 00 60 00 00 00 00 00 00 00 00 02 00 00
40: aa 17 77 39 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 02 00 e1 8d 2c 01
80: 30 29 00 00 03 3d 45 00 43 00 81 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
a0: 00 00 00 00 0e 00 00 00 00 00 01 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 3972
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at b2000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 3000 [size=128]
Expansion ROM at <ignored> [disabled]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900] #19
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
00: de 10 d1 0f 07 00 10 00 a1 00 00 03 10 00 00 00
10: 00 00 00 b2 0c 00 00 c0 00 00 00 00 0c 00 00 d0
20: 00 00 00 00 01 30 00 00 00 00 00 00 aa 17 72 39
30: 00 00 f8 ff 60 00 00 00 00 00 00 00 00 01 00 00
40: aa 17 72 39 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 b4 02 00 e1 8d 2c 01
80: 10 29 00 00 03 3d 45 01 43 00 82 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
a0: 00 00 00 00 0e 00 00 00 03 00 01 00 00 00 00 00
b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
/sbin/lspci -d "10b5:*" -v -xxx
/sbin/lspci -t
-[0000:00]-+-00.0
+-01.0-[01]--+-00.0
| \-00.1
+-01.1-[02]----00.0
+-14.0
+-16.0
+-1a.0
+-1b.0
+-1c.0-[03]----00.0
+-1c.1-[04]----00.0
+-1c.3-[05]--+-00.0
| +-00.2
| +-00.3
| \-00.4
+-1d.0
+-1f.0
+-1f.2
\-1f.3
/sbin/lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09)
00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0155] (rev 09)
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4)
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4)
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4)
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107M [GeForce GT 650M] [10de:0fd1] (rev a1)
01:00.1 Audio device [0403]: NVIDIA Corporation GK107 HDMI Audio Controller [10de:0e1b] (rev a1)
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107M [GeForce GT 650M] [10de:0fd1] (rev a1)
03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 Gigabit Ethernet [1969:1091] (rev 10)
04:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 2230 [8086:0888] (rev c4)
05:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30)
05:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30)
05:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2393] (rev 30)
05:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2394] (rev 30)
/sbin/lsusb
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07da Intel Corp.
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 04f2:b331 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Skipping dmidecode output (dmidecode not found)
/sbin/modinfo nvidia | grep vermagic
vermagic: 3.14.4-1-ARCH SMP preempt mod_unload modversions
Scanning kernel log files for NVRM messages:
/var/log/messages is not readable
/var/log/kernel.log is not readable
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.4-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140507 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014
[ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000995affff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000995b0000-0x000000009a9affff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009a9b0000-0x000000009efbefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009efbf000-0x000000009f6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f6bf000-0x000000009f7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f7bf000-0x000000009f7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009f7ff000-0x000000009f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f800000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x985ad018-0x985d3057] usable ==> usable
[ 0.000000] e820: update [mem 0x98586018-0x985ac057] usable ==> usable
[ 0.000000] e820: update [mem 0x98579018-0x98585057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000098579017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000098579018-0x0000000098585057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000098585058-0x0000000098586017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000098586018-0x00000000985ac057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000985ac058-0x00000000985ad017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000985ad018-0x00000000985d3057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000985d3058-0x00000000995affff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000995b0000-0x000000009a9affff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009a9b0000-0x000000009efbefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009efbf000-0x000000009f6befff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009f6bf000-0x000000009f7befff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009f7bf000-0x000000009f7fefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009f7ff000-0x000000009f7fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009f800000-0x000000009fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045effffff] usable
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9f7fe000 ACPI 2.0=0x9f7fe014 SMBIOS=0x9f6bef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000080000) (0MB)
[ 0.000000] efi: mem05: type=3, attr=0xf, range=[0x0000000000080000-0x0000000000082000) (0MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000082000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem07: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f5b000) (15MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000001f5b000-0x000000007f857000) (2008MB)
[ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007f857000-0x0000000080000000) (7MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x00000000979c0000) (377MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000979c0000-0x00000000979e0000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000979e0000-0x0000000097e62000) (4MB)
[ 0.000000] efi: mem15: type=1, attr=0xf, range=[0x0000000097e62000-0x000000009821b000) (3MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000009821b000-0x0000000098579000) (3MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x0000000098579000-0x00000000985d4000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000985d4000-0x00000000995b0000) (15MB)
[ 0.000000] efi: mem19: type=0, attr=0xf, range=[0x00000000995b0000-0x000000009a9b0000) (20MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x000000009a9b0000-0x000000009a9b8000) (0MB)
[ 0.000000] efi: mem21: type=2, attr=0xf, range=[0x000000009a9b8000-0x000000009a9bb000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x000000009a9bb000-0x000000009a9bc000) (0MB)
[ 0.000000] efi: mem23: type=2, attr=0xf, range=[0x000000009a9bc000-0x000000009a9bd000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x000000009a9bd000-0x000000009a9be000) (0MB)
[ 0.000000] efi: mem25: type=2, attr=0xf, range=[0x000000009a9be000-0x000000009a9bf000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x000000009a9bf000-0x000000009aba8000) (1MB)
[ 0.000000] efi: mem27: type=1, attr=0xf, range=[0x000000009aba8000-0x000000009abbf000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x000000009abbf000-0x000000009af27000) (3MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x000000009af27000-0x000000009b063000) (1MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x000000009b063000-0x000000009b064000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x000000009b064000-0x000000009c9f3000) (25MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x000000009c9f3000-0x000000009c9fb000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x000000009c9fb000-0x000000009ca11000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x000000009ca11000-0x000000009ca12000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x000000009ca12000-0x000000009ca1d000) (0MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x000000009ca1d000-0x000000009ca1f000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x000000009ca1f000-0x000000009ca21000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x000000009ca21000-0x000000009ca22000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x000000009ca22000-0x000000009ca45000) (0MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x000000009ca45000-0x000000009ca47000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x000000009ca47000-0x000000009cd81000) (3MB)
[ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x000000009cd81000-0x000000009cd82000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x000000009cd82000-0x000000009cfa7000) (2MB)
[ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x000000009cfa7000-0x000000009cfa8000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x000000009cfa8000-0x000000009cfbf000) (0MB)
[ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x000000009cfbf000-0x000000009cfc5000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x000000009cfc5000-0x000000009cfd0000) (0MB)
[ 0.000000] efi: mem48: type=7, attr=0xf, range=[0x000000009cfd0000-0x000000009cfd2000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x000000009cfd2000-0x000000009cfe9000) (0MB)
[ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x000000009cfe9000-0x000000009cfea000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x000000009cfea000-0x000000009ebbf000) (27MB)
[ 0.000000] efi: mem52: type=7, attr=0xf, range=[0x000000009ebbf000-0x000000009ec3a000) (0MB)
[ 0.000000] efi: mem53: type=3, attr=0xf, range=[0x000000009ec3a000-0x000000009efbf000) (3MB)
[ 0.000000] efi: mem54: type=5, attr=0x800000000000000f, range=[0x000000009efbf000-0x000000009f04e000) (0MB)
[ 0.000000] efi: mem55: type=6, attr=0x800000000000000f, range=[0x000000009f04e000-0x000000009f050000) (0MB)
[ 0.000000] efi: mem56: type=5, attr=0x800000000000000f, range=[0x000000009f050000-0x000000009f066000) (0MB)
[ 0.000000] efi: mem57: type=6, attr=0x800000000000000f, range=[0x000000009f066000-0x000000009f067000) (0MB)
[ 0.000000] efi: mem58: type=5, attr=0x800000000000000f, range=[0x000000009f067000-0x000000009f07f000) (0MB)
[ 0.000000] efi: mem59: type=6, attr=0x800000000000000f, range=[0x000000009f07f000-0x000000009f080000) (0MB)
[ 0.000000] efi: mem60: type=5, attr=0x800000000000000f, range=[0x000000009f080000-0x000000009f08b000) (0MB)
[ 0.000000] efi: mem61: type=6, attr=0x800000000000000f, range=[0x000000009f08b000-0x000000009f08c000) (0MB)
[ 0.000000] efi: mem62: type=5, attr=0x800000000000000f, range=[0x000000009f08c000-0x000000009f091000) (0MB)
[ 0.000000] efi: mem63: type=6, attr=0x800000000000000f, range=[0x000000009f091000-0x000000009f092000) (0MB)
[ 0.000000] efi: mem64: type=5, attr=0x800000000000000f, range=[0x000000009f092000-0x000000009f0a0000) (0MB)
[ 0.000000] efi: mem65: type=6, attr=0x800000000000000f, range=[0x000000009f0a0000-0x000000009f0a1000) (0MB)
[ 0.000000] efi: mem66: type=5, attr=0x800000000000000f, range=[0x000000009f0a1000-0x000000009f0f2000) (0MB)
[ 0.000000] efi: mem67: type=6, attr=0x800000000000000f, range=[0x000000009f0f2000-0x000000009f137000) (0MB)
[ 0.000000] efi: mem68: type=5, attr=0x800000000000000f, range=[0x000000009f137000-0x000000009f1bf000) (0MB)
[ 0.000000] efi: mem69: type=6, attr=0x800000000000000f, range=[0x000000009f1bf000-0x000000009f2bf000) (1MB)
[ 0.000000] efi: mem70: type=0, attr=0xf, range=[0x000000009f2bf000-0x000000009f6bf000) (4MB)
[ 0.000000] efi: mem71: type=10, attr=0xf, range=[0x000000009f6bf000-0x000000009f7bf000) (1MB)
[ 0.000000] efi: mem72: type=9, attr=0xf, range=[0x000000009f7bf000-0x000000009f7ff000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x000000009f7ff000-0x000000009f800000) (0MB)
[ 0.000000] efi: mem74: type=7, attr=0xf, range=[0x0000000100000000-0x000000045f000000) (13808MB)
[ 0.000000] efi: mem75: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem76: type=0, attr=0x0, range=[0x000000009f800000-0x00000000a0000000) (8MB)
[ 0.000000] efi: mem77: type=11, attr=0x8000000000000001, range=[0x00000000f0000000-0x00000000f4000000) (64MB)
[ 0.000000] efi: mem78: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[ 0.000000] efi: mem79: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[ 0.000000] efi: mem81: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem82: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem83: type=11, attr=0x8000000000000000, range=[0x00000000ffb80000-0x0000000100000000) (4MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20193/INVALID, BIOS 6BCN42WW(V2.02) 02/08/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x45f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 09F800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0FF800000 mask FFF800000 write-protect
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask E00000000 write-back
[ 0.000000] 6 base 400000000 mask F80000000 write-back
[ 0.000000] 7 base 45F000000 mask FFF000000 uncachable
[ 0.000000] 8 base 460000000 mask FE0000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45ee00000-0x45effffff]
[ 0.000000] [mem 0x45ee00000-0x45effffff] page 2M
[ 0.000000] BRK [0x01b3c000, 0x01b3cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45edfffff]
[ 0.000000] [mem 0x45c000000-0x45edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff]
[ 0.000000] [mem 0x400000000-0x45bffffff] page 2M
[ 0.000000] BRK [0x01b3d000, 0x01b3dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x995affff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x993fffff] page 2M
[ 0.000000] [mem 0x99400000-0x995affff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9a9b0000-0x9efbefff]
[ 0.000000] [mem 0x9a9b0000-0x9a9fffff] page 4k
[ 0.000000] [mem 0x9aa00000-0x9edfffff] page 2M
[ 0.000000] [mem 0x9ee00000-0x9efbefff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9f7ff000-0x9f7fffff]
[ 0.000000] [mem 0x9f7ff000-0x9f7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7f857000-0x7fffffff]
[ 0.000000] ACPI: RSDP 000000009f7fe014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 000000009f7fe210 0000AC (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009f7fa000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 000000009f7ed000 009D93 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 000000009f7bb000 000040
[ 0.000000] ACPI: SLIC 000000009f7fd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 000000009f7fc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 000000009f7fb000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 000000009f7f9000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 000000009f7f8000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 000000009f7f7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7ec000 0006FE (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 000000009f7ea000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 000000009f7e5000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 000000009f7e4000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 000000009f7e2000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 000000009f7e1000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7e0000 000926 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7df000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7dc000 0010F1 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 000000009f7de000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x45effffff]
[ 0.000000] NODE_DATA [mem 0x45efea000-0x45efeefff]
[ 0.000000] [ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044e600000-ffff88045e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x45effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x995affff]
[ 0.000000] node 0: [mem 0x9a9b0000-0x9efbefff]
[ 0.000000] node 0: [mem 0x9f7ff000-0x9f7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x45effffff]
[ 0.000000] On node 0 totalpages: 4180807
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 24 pages reserved
[ 0.000000] DMA zone: 3975 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10031 pages used for memmap
[ 0.000000] DMA32 zone: 641984 pages, LIFO batch:31
[ 0.000000] Normal zone: 55232 pages used for memmap
[ 0.000000] Normal zone: 3534848 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98579000-0x98579fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98585000-0x98585fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98586000-0x98586fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x985ac000-0x985acfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x985ad000-0x985adfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x985d3000-0x985d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x995b0000-0x9a9affff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9efbf000-0x9f6befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f6bf000-0x9f7befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f7bf000-0x9f7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f800000-0x9fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88045ec00000 s87040 r8192 d23552 u262144
[ 0.000000] pcpu-alloc: s87040 r8192 d23552 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4115456
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16292016K/16723228K available (5230K kernel code, 857K rwdata, 1632K rodata, 1120K init, 1288K bss, 431212K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.558 MHz processor
[ 0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.66 BogoMIPS (lpj=7981860)
[ 0.000037] pid_max: default: 32768 minimum: 301
[ 0.000044] ACPI: Core revision 20131218
[ 0.006081] ACPI: All ACPI Tables successfully acquired
[ 0.030009] Security Framework initialized
[ 0.030016] Yama: becoming mindful.
[ 0.031004] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.035068] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.036876] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.036893] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.037118] Initializing cgroup subsys memory
[ 0.037123] Initializing cgroup subsys devices
[ 0.037125] Initializing cgroup subsys freezer
[ 0.037126] Initializing cgroup subsys net_cls
[ 0.037127] Initializing cgroup subsys blkio
[ 0.037150] CPU: Physical Processor ID: 0
[ 0.037151] CPU: Processor Core ID: 0
[ 0.037156] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.037529] mce: CPU supports 9 MCE banks
[ 0.037542] CPU0: Thermal monitoring enabled (TM1)
[ 0.037553] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[ 0.037649] Freeing SMP alternatives memory: 20K (ffffffff819f0000 - ffffffff819f5000)
[ 0.041198] ftrace: allocating 20029 entries in 79 pages
[ 0.050996] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084028] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.084036] TSC deadline timer enabled
[ 0.084045] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.084051] ... version: 3
[ 0.084052] ... bit width: 48
[ 0.084053] ... generic registers: 4
[ 0.084054] ... value mask: 0000ffffffffffff
[ 0.084055] ... max period: 0000ffffffffffff
[ 0.084056] ... fixed-purpose events: 3
[ 0.084057] ... event mask: 000000070000000f
[ 0.110826] x86: Booting SMP configuration:
[ 0.110828] .... node #0, CPUs: #1
[ 0.124613] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.131276] #2 #3 #4 #5 #6 #7
[ 0.246855] x86: Booted up 1 node, 8 CPUs
[ 0.246859] smpboot: Total of 8 processors activated (38328.30 BogoMIPS)
[ 0.254157] devtmpfs: initialized
[ 0.257424] PM: Registering ACPI NVS region [mem 0x9f6bf000-0x9f7befff] (1048576 bytes)
[ 0.258171] pinctrl core: initialized pinctrl subsystem
[ 0.258207] RTC time: 19:11:33, date: 05/31/14
[ 0.258239] NET: Registered protocol family 16
[ 0.258316] cpuidle: using governor ladder
[ 0.258318] cpuidle: using governor menu
[ 0.258361] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.258362] ACPI: bus type PCI registered
[ 0.258364] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.258425] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.258428] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.266014] PCI: Using configuration type 1 for base access
[ 0.266838] bio: create slab <bio-0> at 0
[ 0.266930] ACPI: Added _OSI(Module Device)
[ 0.266932] ACPI: Added _OSI(Processor Device)
[ 0.266933] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.266934] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.269731] ACPI: Executed 1 bTrilby wrote:
zacariaz wrote:* b u m p *
Do not do this.
If you want help, start providing relevant information beyond "it don't work". You say you followed the instructions ... which instructions? What steps did you take? It is clear from your xorg.conf that you did not follow the only instructions I could find in the archlinux wiki. Follow those instructions, and post the output of the relevant diagnostic or information-gathering steps included there.
Also if you have information which could be useful - such as which mobile devices/cards allegedly don't work - then share that. Don't keep us in the dark.
I should think that it's quite obvious that I've followed the wiki instruction, which basically is one line in xorg, as is the official nvidia instructions.
This is most likely a problem related specificlally to the gt 650m and/or the lenovo ideapad y500 (and perhaps derivatives thereof).
I do not believe I've left any information out.
Of course if I've done something wrong, I apologize and will do my best to avoid it in the future. As for the rest, I'd very much like to know which instructions I did not follow, as I've done all that I can think of and telling me that I haven't is hardly useful. As far as I aware, the wiki instructs you to ad two line in the xorg.conf, which I've done. I will of course read it again, hoping to figure out what I've apparently missed, though I've read it so many times already that I don't expect to learn anything. -
Will Tablet case with combined keyboard work on Lenovo Ideapad A1 07
Hi All,
Sorry if anyone has asked before but couldn't find specific.
My wife has recently purchased a Lenovo Ideapad A1 07 for its size, a friend who has a small android tablet also recommended to her, to buy a tablet case with combined keyboard with USB connection from amazon. When received the connection obviously doesn't fit, so I started searching around web for an adapter for it, but I’m seeing conflicting info that the ideapad either does/doesn't support USB data transfer connection point, so before buying an adapter what is correct!.
Can anyone throw some light onto whether Lenovo will update the firmware to be able to use USB at any time or has anyone have a work around. Any help and advice to get this keyboard working would be grateful as the tablet is a great little device for her.
GazzatafIf you are patient, go through the reviews of a specific USB keyboard that was suggested as an addition for Lenovo A1 by Amazon: You will see that even though users have tried different cables and adapters, no A1 user has managed to get this working on his tablet.
This issue may be solved by a future upgrade (if any), which will enable the USB OTG feature of the microUSB port of the A1 tablet. Until then, nothing can be done in order to have any USB device identified and working with A1. I really hope that I make a mistake here and that someone will come up with a working soultion for this issue ... -
Which LCD cable for Lenovo IdeaPad S12 (Series: 2959)
Hi!
I have a Lenovo IdeaPad S12 for three years now... and I am generally really happy with it
Since a few weeks, however, my display is not working properly anymore. Depending on the angle, certain colors change their appearance (white colours flicker blue-ish and dark colors show red-ish flickers). I have already stopped by a Laptop repair shop and the guy said that I need a new LCD cable and the hardware should be ok.
Does anybody know which exact cable I need? I have found three different cables on offer:
50.4CI11.001
50.4CI11.002
50.4CI12.001
Is it possible to say only with my series number (2959) which of the three I need?Dear customer
Welcome in lenovo forums
For such inquiries , please contact the below support to get this information
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Lenovo Ideapad U260 Multi-touch trackpad problem
Hello, I'm from Mexico, I bought a Lenovo Ideapad U260 on a trip to the U.S.A. I fell in love with this powerfull little laptop inmediately, but I don't know if it has a driver issue or im just too clumsy about the multi-touch glass trackpad.
How do I enable the multi-touch feature on the glass trackpad?
Do I have to wonder trough settings, or do I need to update some drivers??? (It's Core i5 btw)
Thanks in Advance.
Solved!
Go to Solution.control panel > hardware and sound > mouse > device settings > settings ( if you have synaptic hardware )
-
Lenovo Ideapad U410: part of screen is white
I have a Lenovo Ideapad U410 and the left part of my screen is uniformly white after turning on the laptop. It's a rectangle about 1 inch long, from top of the screen to the bottom.
I got this suddenly pretty much a month after buying the laptop (it appeared suddenly and I didn't do anything to cause it), and then the area of the white rectangle got bigger after I mistakenly dropped my laptop yesterday.
Would buying a new screen and installing it fix this, or could the problems be more besides the screen?
And is this covered by limited warranty?
Thanks.Hi Dsav6,
As per your concern, I would suggest you to please re-install the graphics driver of your system from the below mentioned web link.
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073650
Afterwards, please restart the system and check if the issue still persists then it needs a personal assistance and it will be covered under warranty.
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Need help with installing Ubuntu on Lenovo Ideapad Z500.
I just bought a new Lenovo Ideapad Z500 yesterday. It came with Windows 8 pre-installed. Now, I also want to install Ubuntu over it. The disk is partitioned as follows:
Disk C: - 880 GB (approx)
Disk D: - 30 GB (approx) (I don't remember exact partition, as my laptop is currently at my home).
Then I thought, I would better re-partition the C drive into 1 or 2 small drives. So, I shrinked the C drive by going into "Disk Management", and then created 3 more partitions - 240 GB * 2, 300 GB * 1, and left the C drive with 100 GB space. I didn't modified the D drive.
Till then I didn't went through any infomation over internet. But, now when I went through this forum, I found out that my OKR won't work now, that I still have to confirm when I go home. So, now I'm worried. I scanned through so many post here, and no where found a way to install Ubuntu on Ideapad Z500.
I also read that it will be possible to run OKR, if I can re-store the partition to it's original. I think this can be done, since I just have to remove the volume I created, and allocate the memory back to C drive. And it will be back to original state, as I didn't modify D drive (correct me if am wrong, or if it can't happen).
So, the major question that I want to ask is, is there no way to partition my disk, and install Ubuntu in one of them.hi rohitjain-rj,
Welcome to the Lenovo Forums.
On a Z400 Touch running on Windows 8 preload, shrinking the the C-Drive under Disk Management and creating multiple partitions on the unallocated space and then reverting the partition back to original made the One Key Recovery work as normal - haven't tested this yet on the Z500 as there's no available unit but chances are, it may also work.
In installing Ubuntu, have you tried to install Ubuntu via Wubi ?
If Ubuntu doesn't start, boot into the BIOS (press the OKR button > select BIOS Setup Utility) and set the following:
Boot Tab
Boot Mode - Legacy Support
Boot Priority - Legacy First
Exit Tab
OS Optimized Defaults - Other OS
Regards.
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Lenovo IdeaPad Y530-5243U and Ubuntu
I'm in the market for a new laptop, and the Lenovo IdeaPad Y530-5243U looks appealing. I'd like to install Ubuntu 8.10 on it.
Anybody know if I'll run into any problems? (Wireless adapter issues, perhaps?)
Thanks.I'm running an SL400 thinkpad and I had to download the madwifi drivers and compile them by hand to get my wifi working. IT was pretty easy. You just have to recompile and install each time your kernel updates.
-
My new Lenovo IdeaPad N580 not working well :(
Hello, I have a Lenovo IdeaPad N580 with build-in windos 8 OEM. I got from my uncle, came from abroad. now a days it does not wark as well. Problems, 1. Sometimes touchpad seems to be hanging when I working. But with external usb mouse it works fine. 2. Some keys are not working like u, k 3. When my system run first..... If I doule click on any icon in desktop to open it...... It accept the command as "Delete"... I seems just I want to delete the icon.... by the way I want to open the program/drive. When the hidden command is executed..... I find the icon/folder/file anything in "Recycle Bin"..... and command seems to be unlimited (multiple times).... My observation in this issue: System might be work in self!! also in Windows "safe mode" I tried to fix up it by "System Recovery" and "System Resetting". But no result Please help me to fix the problem Regards, P Delwar
Bring all the express to the same room as the mac you are using to setup the network..
One by one, plug them in and do full factory reset on them.. they should then show up in the Airport utility as Other Wi-Fi devices (1) and you can select them and continue the setup.
If that fails try using the airport utility on ipad or iphone as they are far less problematic than Yosemite in particular. -
Lenovo Ideapad U460 overheats very easily and loud fan
Hello,
My Lenovo Ideapad U460 overheats even when I have 10% CPU usage while my fan is often on and very loud even while I'm using very low resources. Any suggestions?
I've been having this issue for a long time and just figured it's just how this laptop performs.have you looked at the relevant wiki pages? Try lm_sensors to see why its running so much, maybe your temps are high. If so you can use laptop_mode_tools to see what can help.
-
Wireless Bluetooth Speakers (TDK A33s) Won't Stay Paired to Windows 8.1 (Lenovo IdeaPad Y580)
Hello,
I recently acquired a pair of Bluetooth speakers (the TDK A33), and am unable to connect it to my PC. The Bluetooth interface sees the speakers, connects with
them for a few seconds when I try to pair, and then disconnects. The speakers connect to my phone just fine, so it's not the speakers (and TDK tech support hasn't exactly been very helpful).
I'm running Windows 8.1 on a Lenovo IdeaPad Y580; I tried updating
my Bluetooth drivers, as a few sites recommended (pulling them from them Lenovo site), but still no dice. I've read a few things that seem to suggest is a
Windows 8.1 issue.
Any advice would be much appreciated!
Thanks,
Btry to check whether you have the latest version
http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-y-series-laptops/ideapad-y580?c=1
check also whether this Bluetooth can be connected to other device
you can also try to delete all Bluetooth profile, and test
try to other PC with Windows 8.1 OS if any -
My lenovo ideapad G570 some keys are not working
Dear Friends,
Am using Lenovo ideapad G570
from last 2months in my laptop some keys not working (N,B,Left,Right,Up Arrow and Space bar)
Kindly Suggest me For resolving the issue.hi vickydy,
Welcome to Lenovo Community Forums!
First make sure this is a hardware concern.
Run an Onscreen Keyboard, by Pressing (Windows key + R) then type in OSK then hit enter
Now on your onscreen Keyboard click on the keys that are not working see if they responding with the Onscreen keyboard.
If the keys responded using the Onscreen Keyboard, Then your Keyboard hardware is bad.
Either you call Technical Support to have them repair the unit in / out of warranty repair OR Ask them where to get the part for it and have the keyboard replaced.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Maybe you are looking for
-
Let's get an MP3 player headphone/earbud discussion going
I am shocked to see how little use this little slice of this great forum is. As we all know, the earbuds that typically accompany any stock MP3 player are usually sub-standard, at best. Often they are terrible. Occaisionly they are passable, and once
-
Laptop keeps shutting down and restarting after touchpad dies
Trying to decide ehat went wacky on a friend;s Toshiba SATELLITE S105-3713 laptop (running WIndows Vista Home Premium). FIRST: touchpad just stopped working; I hodeb up an external mouse and checked out the device manager - no touchpad existed at a
-
Adobe flash player on mobile devices
im not sure my doubt is out of league, but i hope to find an answer. that'swhy im posting such a question here. i am developing a website in which an user uploads a swf file and download it as apk(android format). i am using adobe flash player to dis
-
IPad not updating BOOKS in iTunes
When I "delete" books from my iPad and then resync, they show back up - it seems as if the ones I'm deleting do NOT update iTunes. Is anyone else experiencing this issue, and if so, has anyone found out how to correct this?
-
Hi, I have created a window for LOGO and written the following code in the line editor, /: BITMAP SAMPLE OBJECT GRAPHICS ID BCOL LANGUAGE EN and i have called the FM in the report program, CALL FUNCTION 'WRITE_FORM' EXPORTING ELEMENT